IPC016A IMILAB Home Security Camera Basic User Manual

Read this manual carefully before use, and retain it for future reference Product Overview Status Indicator Lens MIC MicroSD Slot Can be revealed by pushing the lens upward RESET Reset Buon Loudspeaker Micro-USB Charging Port Product Installation The IMILAB Home Security Camera Basic can be placed on a number of horizontal surfaces, such as a writing desk, dining table, and coee table. It can also be mounted on the wall. Mounting the Security Camera on a Wall 1. Drill two holes on the wall by using the base of the security camera as a template. It is recommended that you mark the locations of the holes with a pencil before drilling. The diameter of each hole is approximately 6 mm, and the depth is approximately 25 mm. Front View Rear View 2. Insert the two plastic anchors into the holes on the wall. 3. Make sure to position the base unit so that the arrow is pointing up. Secure the base unit in place by tightening the screws into the plastic anchors. Product Instructions Turning the Device On The IMILAB Home Security Camera Basic will automatically activate once the power cable is inserted into the Micro-USB charging port. 4. Match the grooves on the boom of the camera unit with the raised area on the base unit. Press down until the two surfaces are ush, then turn the camera unit in either direction to lock it in position. Indicator Light Steady blue on: connected/device status is normal Flashing blue: network error Flashing orange rapidly: waiting for connection Flashing orange slowly: system upgrade in progress Installing a MicroSD Card Make sure that the power to the security camera is already disconnected. Adjust the camera lens upward until the MicroSD slot is revealed, then insert the MicroSD card into the slot (the side with contact points must be facing down). Quick Setup Install Mi Home APP Scan the QR code or go to App store to download and install Mi Home APP. This product has been linked to Mi Home, supporting the control by sliding the screen lock of MIUI system, and the interconnection with other smart home devices in Mi Home APP. 2.Click the quick add buon on home page or top right buon + to add device. Android user can using Scanning nearby devices to quick add device. 4:19 4G Your Home My devices Tap to add a device 4:19 4G Add device Device nearby Add manually Enter device name to add Camera Video camera

(Android Device) 4.Please follow the Setup steps to connect your device. RESET MicroSD Device Connection 1.Login in your MI account at MI Home app.(If you not have MI account, please registration rst). 3.Please Click the top right buon to Scan this QR code on deviece boom, and you also can search IMILAB Home Security Camera Basic at Search bar to add device. IMILAB Home Security Camera Basic User Manual Package Contents: IMILAB Home Security Camera Basic, user manual, wall mounting accessories pack When mounting the security camera on a wall:

please note that the wall must be able to support at least triple the product's total weight. If the indicator light is ashing orange, that means the device is activated successfully. If you do not see a ashing orange light, please press and hold the Reset buon to restart the device to enter pairing mode. Once the IMILAB Home Security Camera Basic is turned on, please do not aempt to rotate its head by force. If the camera position is incorrect, adjustments can be made through the app. Restore Factory Seings Press and hold the Reset buon to restore your device to factory seings. Data stored on the MicroSD card is not erased. Saturday 4:19 4G Add device Search Camera Video camera

(iOS Device) 4:19 Cancel 4G Plug device in and follow manual to operate IMILAB Home Security Camera Basic Hold the reset button for about 3s unitel the notification light turns yellow Wait until voice prompt Next Hereby, Shanghai Imilab Technology Co., Ltd. declares that the radio equipment type IMI Home Security Camera Basic is in compliance with Directive 2014/53/EU. Resolution: 1920 x 1080 Focal Length: F3.2 Item Dimensions: 108 x 76 x 76 mm Specications Name: IMILAB Home Security Camera Basic Model: CMSXJ16A Lens Angle: 110 Net Weight: 182 g Video Encoding: H.265 Power Input: 5 V 2 A Operating Temperature: -10 ~ 40 Expandable Memory: MicroSD card (up to 64 GB) Compatible With: Android 4.4, iOS 9.0 or later Wireless Connectivity: Wi-Fi IEEE 802.11 b/g/n 2.4 GHz Manufactured: Shanghai Imilab Technology Co., Ltd.

(a Mi Ecosystem company) Address: Room908,No.1,Lane399,Shengxia Rd., China Pilot Free Trade Zone, Shanghai, China For further information, please go to www.imilab.com. Consult the dealer or an experienced radio/TV technician for help. FCC 20cm Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmier must not be co-located or operating in conjunction with any other antenna or transmier. FCC ID: 2APA9-IPC016A Adaptor Statements For pluggable equipment, the socket-outlet (power adaptor) shall be installed near the equipment and shall be easily accessible. WEEE Disposal and Recycling Information Correct Disposal of this product. This marking indicates that product should not be disposal with other household wastes through out the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environment safe recycling. FCC Statement Real-Time Monitoring Supporting Infrared and Image-intensied Night Vision Playback Automatic Monitoring Shared Remote Viewing Precautions Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and canradiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interferenceto radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Launch the Mi Home app and select a IMILAB Home Security Camera Basic that is already connected to monitor the surroundings in real-time. The camera's control interface allows you to adjust the sharpness of the image, as well as to change the device's vertical and horizontal viewing angles. Additional features such as screen capture or record and remote communications can also be performed. With the incorporation of eight infrared illuminators, the security camera is able to view up to a distance of 9 m and capture crystal clear images in the dark. IMILAB Home Security Camera Basic's playback feature is only available aer installing a compatible MicroSD card. Once a MicroSD card has been installed and the security camera is turned on, videos will be recorded automatically. Aer entering the user interface of the Playback feature, simply slide the bar on the timeline to select the time period you wish to view. Automatic monitoring can be congured through the IMILAB Home Security Camera Basic control interface in the Mi Home app. Available options include 24-hour, daytime, and nighime monitoring. You can also create your own schedule and set the desired camera angle. This product is able to detect movements within its eld of view. Once movements are detected, a video is recorded and you will receive a notication. IMILAB Home Security Camera Basic 105KB S HD Monitoring Review Call Photo Album Shortcut 2018 3 2 20:51:05 IMILAB Home Security Camera Basic 108KB S IMILAB Home Security Camera Basic 108KB S Infrared night vision mode sample Monitoring Review Call Photo Album Shortcut Monitoring Review Call Photo Album Shortcut HD Through the IMILAB Home Security Camera Basic control interface in the Mi Home app, you can set your security camera as a shared device under the General Seings menu, and invite your friends to view the camera remotely. Your friends will be required to download the Mi Home app and log in with his/her Xiaomi account. General Seings Sharing with Mi Home Rename IMILAB Home Security Camera Basic Manage Sharing Share with Mi Account Security Seings Device Sharing Location Management Check for Firmware Updates Delete Device Add Desktop Shortcut Network Information Feedback The suitable operating temperature range for this product is between -10

~ 40 . Please do not use the product in an environment with temperatures above or below the specied range. The security camera is a precision electronic product. In order to ensure its normal operation, please do not install the device in an environment with high humidity levels or allow water to enter the product. To improve the product's performance, please do not place the camera lens facing or next to a reective surface, such as glass windows/doors and white walls, which will cause the image to appear overly bright in areas close to the camera and darker in areas further away, or cause the camera to produce white images. Please install the product in areas with Wi-Fi reception, and try to place the device where the Wi-Fi signal is strong. In addition, please keep the security camera away from metal structures, microwave ovens, or other locations where signal strength may be impacted. Note:

The diagram is for reference only. Actual displays will vary based on dierent versions of the Mi Home platform and your smartphone model. Note:

The diagram is for reference only. Actual displays will vary based on dierent versions of the Mi Home platform and your smartphone model. Note:

The diagram is for reference only. Actual displays will vary based on dierent versions of the Mi Home platform and your smartphone model. Note:

The diagram is for reference only. Actual displays will vary based on dierent versions of the Mi Home platform and your smartphone model.