T8A01 T5930 user manual

1 2

+

-

5 6 7 8 9 1 3 4 10 Quick start Notices 1 2 3 4 5 6 7 8 Scaning Button Short press for scanning. Volume Button Press for adjusting volume. PTT Short press for network speaking. Fn Button Used for setting shortcuts. Power Button Short press: turn the screen on or off. Long press: When the device is turned off, press and hold the power button for 2 to 3 seconds to turn it on;

When the device is in use, press and hold the power button for 2 to 3 seconds to turn it off or restart it. When the device crashes, press and hold the power button for 11 seconds to make it reboot automatically. Scanner Laser one-dimensional barcode scanner for reading information Caution: In caseof the laser radiation, do not look straight at it. Rear Camera Support shooting and scanning 1D or 2D code rapidly. Nano SIM Card Slot (optional) Note: Turn off the phone before plugging or unplugging the Nano SIM Card, or the malfunction might be caused. SIM card 2G/3G/4G full network access Security Warning Please insert the AC power plug into the AC power socket that corresponds with the identifying input on the power adapter;

This device is a product grade A. It may cause radio interference in the living environment. About the replacement of battery:

Replacing with wrong battery may cause explosion!

Please hand the old battery to maintenance personnel, and do not through it into fire. Important Safety Instructions Avoid the installation or usage during lightning, or there is a risk of being harmed by lightning. Please turn off the power immediately when you find suspicious burning smell, overheating or smoke. Statement The company is not responsible for the following actions. Damage of the product resulting from the use of the product without in accordance with the user mannual;

For damage or problems of the product resulting from the options or consumables( not the initial or approved product), the company assumes no responsibilty. Without permission of the company, no one is authorized to modify or alter the product. The operating system of the product supports official updating of the system. The system instability and security risk may caused by actions that users install the third-party ROM system or modify the system files in cracked way. Disclaimer Due to the updating of the product, some details in the document may not correspond with the product, and please in kind prevail. The company shall be responsible for the interpretation of the document, and reserve the right to modify the manual without prior notice. 9 PSAM Card Slot (optional) This place is used for plugging encryption PSAM CPU card. Table for Names and Content Identification of Toxic and Hazardous Substances in this Product 10 Micro SD Card Slot (optional) This place is used for plugging Micro SD Card. Strap Installation 11 Back Cover Lock Unlock the battery cover by lifting up the back cover lock and rotating it. Note: the battery cover must be installed on the device, otherwise it will affect the normal use. Strap Installation Thread the fixed part of the strap through the perforation at the bottom of the device. Thread the fixed belt through the metal buckle in accordance with the direction shown in the picture. Fixed it with screws. Toxic or Hazardous Substances and Elements Pb Hg Cd Cr(VII) PBDE PBB Part Name Circuit Board Component Structural Component Packaging Component indicates that the content of the toxic and hazardous substance in all homogeneous materials of the component is below the limit specified in SJ/T 11363-2006. indicates that the content of the toxic and hazardous substance in at least one homogeneous material of the component exceeds the limit stipulated in SJ/T 11363-2006. However, as for the reason, because there is no mature and replaceable technology in the industry at present. The products that have reached or exceeded environmental protection service life should be recycled and reused according to the Regulations on Control and Management of Electronic Information Products, and should not be discarded randomly. FCC certification information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The smartphone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. Government when used as directed in the previous section. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg*. Tests for SAR are conducted using standard operating positions specified by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The highest SAR value for this smartphone when tested for use at the ear is: 0.376W/Kg The highest SAR value for this smartphone when tested in a holster with an integrated belt clip or at a distance of 0.39 in. (10 mm) from the body, is: 0.974W/Kg Body-worn measurements (recommended separation distances) differ among wireless devices, including smartphones, depending upon supplied or available accessories and applicable FCC requirements. The FCC has granted an Equipment Authorization for this smartphone based on reported SAR levels complying with the FCC radio frequency emission guidelines when the smartphone is used as directed in this section. SAR information for this smartphone is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea after searching for the FCC ID for your smartphone listed below. FCC ID:2AH25T8A01 Technical features and characteristic the product includes the following features and characteristics GSM 850 GSM 1900 WCDMA BAND II WCDMA BAND IV WCDMA BAND V LTE BAND 2 LTE BAND 4 LTE BAND 5 LTE BAND 7 LTE BAND 12 LTE BAND 17 LTE BAND 25 LTE BAND 26 LTE BAND 41 WIFI BT BLE NFC Operation Frequency 824-849 MHz 1850-1910 MHz 1850-1910 MHz 1710-1755 MHz 824-849 MHz 1850-1910 MHz 1710-1755 MHz 824-849 MHz 2500-2570 MHz 699-716 MHz 704-716 MHz 1850-1915 MHz 814-849 MHz 2496-2690 MHz 2412-2462 MHz 2402-2480 MHz 2402-2480 MHz 13.56 MHz Transmitted 32 dBm 30 dBm 24 dBm 24 dBm 24 dBm 23 dBm 23.5 dBm 24 dBm 24 dBm 24 dBm 20 dBm 23.5 dBm 23.5 dBm 24 dBm 20 dBm 9.5 dBm 1dBm Manufacture Shanghai Sunmi Technology Co., Ltd. Room 505 No.388 Song Hu Road Shanghai, China QUICK START GUIDE T 8 A 0 1 1 0 _ T V P _ N E _ N C _ 1 0 A 8 T

&

0 0 A 8 T PANTONE 165C PANTONE Orange 021C 80mm 180mm 400mm 180mm

+15 105g