submitted | available | document details (if available) | source link |
---|---|---|---|
November 19 2017 | November 19 2017 | C1A_小蚁行车记录仪说明书(英文版) wangwei Adobe PDF library 15.00 |
various | User manual | Users Manual | 4.15 MiB | November 19 2017 |
USB Car charger
[Input:12-24V, Output:5V]
1. Insert the USB car charger into your car's cigarette lighter socket. 2. Insert the USB end of the USB power cord into the USB car charger. 3. Insert the Micro USB into the dash cam USB port.
[Charger Specifications: Input:12-24V, Out:5V]
Loop recording and charging will automatically begin after you start your car,and the "Stautus lndicator Light"will stay on. You can change the video recording status (start and stop) by pressing "Loop Recofding". Press "Album" to review recordings. Use the arrows to review the previous or next video. Select "Comfirm" to start photo playback. During playback, use "Confirm" to pause the ablum. REC Before using the mount bracket on your windshield, check the state and local laws and ordinances where you drive. Some state laws prohibit drivers from using mounts on their windshields while operating motor vehicles. Other state laws allow the mount bracket to be located only in specific locations on the windshield. Many other states have enacted restrictions against placing objects on the windshield in locations that obstruct the drivers vision. IT IS THE USERS RESPONSIBILITY TO MOUNT THE DEVICE IN COMPLIANCE WITH ALL APPLICABLE LAWS AND ORDIANCES. Always mount your device in a location that does not obstruct the drivers view of the road. YI does not assume any responsibility for any fines, penalties, or damages that may be incurred as a result of any state or local law or ordinance relating to the use of your device. 8)YI Statement Shanghai YI Technology Co., Ltd. hereby makes a statement that: In order to improve customer experience, products provided by the company is classified into China mainland version and international version. Products of China mainland version are only limited to be used in China mainland, while overseas use needs to purchase products of international version of our company from overseas dealers specified by our company or overseas sales network self-operated by our company. For problems caused by use of incorrect version, our company shall not take any responsibility. Products, applications, functions and interfaces etc. mentioned in this manual may be improved or updated after sales, when actually used product and related applications are different from this manual, please focus instructions in official website of our company: Chinese official website: www.xiaoyi.com International official website: www.yitechnology.com, no further notification about update of this manual will be sent to individuals. Maximum resolution: 1920 x 1080 Video resolution: 720P 30fps/1080P 30fps FOV(D) 130 Sound: Built-in microphone / speaker Video compression: H.264 encoding Enhanced WDR Weight: 2.5 ounces Storage: 8-64GB Class 10 or above with FAT32 format 2.7" Graphic 960 x 240 dot-matrix delta type TFT LCD Wi-Fi supports single band 2.4GHz and 802.11n standard Smartphone platform support: Android / iOS WPA2 wireless encryption Power cord: 11.5ft length Power Source: USB Car Charger, Input: 12V-24VOutput: 5V Thank you for choosing the YI UItra Dash Camera, please read the instructions carefully before using the product and keep it in good condition. Manufacturer: Shanghai Xiaoyi Technology Co.,Ltd Website: www.yitechnology.com Service Telephone: +86-21-6765 6722 E-mail: support@yitechnology.com Address: 6F,Building E, No.2889 Jinke Road,Pudong District,Shanghai,China After powering on, press the Setting/Power button to enter the Settings menu:
Resolution: Default is 19201080P/30fpsPress "Confirm" to select among 19201080 30fps and 1280720P 30fps. AudioPress "Confirm" to enable or disable microphone. GsensorDefault is medium sensitivity. Press "Confirm" to select low, medium, or high sensitivity. When the vehicle collides or brakes the camera automatically locks on the current scene and records for 10 seconds after the collision. Wi-FiPress "Confirm" to turn on/off Wi-Fi. Format SDPress "Confirm" to format the memory card.
(caution: this will erase all data.) Factory Reset: This will restore the device to its original system settings. Driving ReportPress "Confirm" to enable or disable driving report. After driving for more than 10 minutes the camera will show a driving report, such as acceleration, brakes, driving time, etc. Resolution:1080P/30fps Resolution REC Long LCD OFF Brightness Factory Reset Set Date/Time Driving Report Language 1 CN Back Previous Next Confirm Gsensor Audio Format SD Wi-FI Button Sound Power On/Off Sounds About REC C1A US V1.0 FCC ID:2AFIB-YCS1A17 2017-10-23 V1.0 C1A
-
-
This product uses the FCC Data API but is not endorsed or certified by the FCC