T2S Smart voice translator Users manual

Intelligent Voice Translation Machine Product appearance Loudspeaker Power key Volume button Touch screen First language key Second language key Mic The product features Suggestion: Simultaneous interpretation,Build for cross-language communication Intuitive interface design, easy to understand operate. Two-way translation supported,switch the translation by simply pressing the UP &Down buttons.UPis for translating others language,press the Down button to translate your language to others. Support 28 languages English (Australia) ,English (America), English ,Japanese ,Arabic, polish, Danish, German, Russian, French. French (Canada) ,Finnish, Korean, Dutch, Czech, Romanian , Portuguese. Portuguese (Brazilian) Swedish, Thai , Greek, Spanish. Spanish (South American) Hungarian Italian Cantonese Chinese simplified Chinese traditional.. User manual Switch machine BootPress the power button 2 seconds to boot up the device,Device is started successfully when the screen lights up and boot animation plays Shut downLong press the power button 2S above the power button, the screen will appear "shutdown /restart

", select Power off, device shutdown. Restartpress the keyhole 2S above the left button with the toothpick long in the power-on state, and restart the device. Lock screenWhen the screen is on, Press the left power button to enter the lock screen standby mode. WakeIn standby mode, Press the left power button to wake up the translator and continue using. Volume button Adjust the volume, click "+" on the navigation key to increase the volume, and click "-" on the navigation key to reduce the volume. Networking (setting up WIFI) Search the WIFIClick on the "WIFI Settings" menu and open the search WIFI switch. The device will search automatically. you can click on the "" icon in the upper right side in the pop-up window click: refresh, equipment automatic search again.If the WIFI(available in the current place) isnt detected or off from the WIFI list ,please. Manually add WIFIClick on the "WIFI Settings" menu and open the search WIFI switch,Click on the "" icon in the upper right side in the pop-up window click: add network, enter the network name and password and then click the save. Connect WIFI Click to select your own WIFI and enter the password entry page.Enter your password and click OK.The WIFI icon at the top of the screen shows success. Dialogue This feature requires a network connection to be used properly Translation operationThe left side is the first language, the right side is the second language, and switch the language by clicking the double-arrow in the middle. Press the button below and then record the first language after hearing the prompt tone, and then play the second language translation result after release. long press the UPbutton, after the tone,device will start recording the first language and translation will be generated automatically Attention To ensure that the language is translated perfectly and precisely, please wait for one more second after the tone.Then speak. After recording, please check the record that shows on the screen so as to get accurate translation.If you are in a noisy environment, you might show the texts to the people you are talking with. The translation machine's machole is under the machine. Do not pause during the speech, or two sentences in a sentence. The above situation can easily lead to inaccurate translation. Please try to avoid it. Try not to use pet phrases slang Conventional After starting up, enter the "setting" page, and operate the "voice output" item, which can freely switch the translation mode The session interface translation record reaches 200, to clear the session history translation record. Otherwise, it will affect the normal use of conversational functions. System language Click "Settings" to enter the Settings page after start up, and click "set system language"

to set the system language. Version check update After start up, if there is a new version, will automatically prompt. Or enter the "Settings"

page, and click "check update". If there is a new version, clickOK to start the update. Attention Before updating, please ensure sufficient power and network. In the update process, do not do any operation, do not press the power button. After the upgrade is done,please do not operate the device until its boot-up automatically. Charging The battery icon in the upper right corner will produce the corresponding animation. Charging in the shutdown state will show the charging progress bar and the charging percentage. Product parameters Networking The battery WiFi

-

USB

-

USB2.0 1200mAh Memory Language font RAM:512M ROM:4GB Bai duGoogle, Microsoft Touch screen 2.4IPS Size 144*17*55 ________________ Safety precautions The battery The translation machine battery only accepts the translation of the product license service provider of the intelligent voice translation machine, please do not disassemble, replace or change. operation If any damage, The product components contain metal, plastic and internal sensitive electronic components. failure or contact with liquid, please contact customer service. Repair Do not remove the interpreter and try to repair it by yourselfIn case of damage, failure or contact with liquid, please contact customer service. Use environment Avoid using a translator in too hot or too low temperature to avoid long hours of sunlight and cause adverse reactions in the fuselage.Please note that the translator and power adapter should be placed in a well-ventilated environment to avoid metal corrosion. Charging Use the included cableOr in line with the national 3C and input:100-240V~50/60hz0.2A output Qutput :5V ___________ Common problems 1 The product can't start?

Device stuck: long press the power button for 10 seconds can be forced to shut down. Unable to boot: 1. After the power button is pressed for 10 seconds, try to start it again. 2. Charge the battery for a while, then try it on. Make sure to connect to WIFI properly and enter the correct password. Currently, there is no support for WIFI sources in hotels, airports and public places. Check whether the wire and the interface are properly connected. Press the shutdown button to disable the interpreter when not in use. Avoid - 10 ~ 55 outside the temperature range of use This product is not waterproof, please do not put the product into water. 2 Can not connect WIFI 3Can not charge normally 4 How to maintain the product properly?

Warning _____ The translation machine is a low power frequency device which is qualified by formal certification,No company, firm or user may change the battery without permission To increase the power or change the functional characteristics of the original design. Before the signal is used, please do not affect the safety of the flight and interfere with the legitimate communication. If the interference phenomenon is found, it should be stopped immediately until there is no interference. Failure to follow safety instructions may result in fire, electric shock, injury or damage to the interpreter or other property. Please read the safety regulations before you encounter any problem or maintenance. Disclaimer _________ Please read the product manual care This product is not responsible for translation results. Do not put the product placement in 55 to 10 ~ outside the temperature range of use. This product is not waterproof, do not put the product into water. Intelligent voice translation machine three guarantees After-sales service commitment of intelligent voice translation machine.Strictly according to the law on consumer rights of the People's Republic of China,Product quality law of the People's Republic of ChinaCarry out after sale three package service,The service is as follows:

During the three package period,You may enjoy the right to repair, replace and return the goods according to the regulations. Name Performanc e problems Intelligent voice translation machine body The function in the specification is invalid Voice failure Charge Improper charging FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the users authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. RF warning statement:

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.