CTGT06E GPS VEHICLE TRACKER User manual

 

3G GPS Vehicle tracker

(GPS+WCDMA+SMS) User Manual

(Version 1.0) This user manual has been specially designed to guide you through the functions and features of your GPS vehicle tracker. 1. Start Guide 1.1 Accessories:

Device Power cord Relay (Optional) Microphone SOS alarm cable & button User Manual 1.2 Main Functions Real-time tracking Vibration/Displacement/Low battery/Power off alert SOS ACC detection Geo-fence Mileage Air update AGPS locating Remotely control electricity/oil Analogue input Output control Digital input 1.3 Specifications WCDMA 850/900/1900/2100MHz GSM 850/900/1800/1900MHz WCDMA /GPRS 9-36VDC<300mA Cold Start: 35s Hot Start2s

<10 meters

-20 +70 98.5(L) x 52(W) x 15(H) mm 80g Frequency Networks Operating Voltage Location Time Location Accuracy Operating Temperature Dimension Weight 2 My device 2.1 Appearance 2.2 LED indicators GPS LED Indicator - Blue Flashing (interval 0.1s) Solid blue OFF GSM LED Indicator - Green Quick flashing (interval 0.1s) Slow flashing (flash 0.1s every 2s) Solid green OFF Searching GPS signal GPS positioned GPS sleep or off GSM initializing Receive GSM signal normally Connected to GPRS network No GSM signal or SIM card Power Status - Red Flashing (interval 0.1s) Slow flashing (interval 2s) Slow flashing (flash 0.1s off 2s) Normal operating Solid Red OFF Low battery Full charge Charging Low battery/Power off Note:

Defense Status The device is in defense status if blue, red and green indicator flashed in a loop. 3. Installation 3.1 Install the SIM card Notice SIM should be inserted correctly. SIM card should have GPRS service. 3.2 Device Line Definition Picture 1 Description 12V/24V positive side of battery 12V/24V negative side of battery ACC ignition Relay External power supply Data receiving / backup interface Data sending/ backup interface Negative electrode Table 1 Line 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Relay wiring instruction Relay wiring way of oil pump open circuit: On each end of the wire is thin white line (85) and thin yellow line (86). Thin white line (85) connects to the positive side of battery (12V) while thin yellow line (86) connects to the device relay control. There is an oil pump in the vehicl. Cut off the positive line. The positive side of oil pump connects to the close-end of relay.(Thick green line 87a), and Definition PW+

GND ACC RELAY 5V-OUT RX TX GND ADC IN1 OUT1 GND SOS+

MIC+

MIC-

Color Red Black Orange Yellow Red Blue Green Black Purple Orange Yellow Black Orange Brown Black Extended Interface Microphone SOS button the other side connects to relays commongreen thick 30. Notice:

12V relay is standard. The device is suiitable for vehicles with 12V battery. If the vehicle has 24V battery, then 24V relay needed. 3.3 Device Wiring Way 1) The standard power supply ranges from 9V to 36VDC. Please use the powe cord manufactured by the original factory. Red line means positive side while black line means negative side. During installation, negative side should connect to the ground. 2) ACC line (orange) connects to vehicles ACC, detecting ignition and flamout. 3) Devices oil and electricity control line (yellow) connects to relays 86. (thin yellow line of relay socket) 3.4 Device Installation Note:

The device should face up to the sky Metal thermal barrier or heating layer of the windshield affects the signal. Please change installation places to receive better signal. 4. Operation of device Power on/ Power off Power on: Once insert a valid SIM card and connect all the wires, turn on the device, then Power LED will flash first, During signal searching process, GSM and GPS LED will flash. Once GPS LED keeps solid light, it means the device has been located and it starts to work. Power off: Just turn off the power switch. Notice:

When device is charged by external power, please turn on the battery. The battery will connect with the device circuits and its built-in battery will be charged. If battery is OFF, battery cant be charged. The device will power off if no external power supply. 5. Main Functions 5.1 SOS In emergent case, press SOS for 3s to activate SOS alarm. Then the device will send SOS SMS to preset SOS numbers and then dial the numbers in 3 circles until the call is picked up. Alarm message will also send to platform. 5.2 Power cut-off alarm When the electricity supply of device is cut off, it will activate cut-off alarm. 5.3 Low battery alarm When battery is low, the device will activate low battery alarm. 5.4 Displacement alarm Device will send movement alarm when vehicle moves out the pre-set distance

(when ACC is off and GPS is fixed). 5.5 Vibration alarm (Default ON) When vehicle vibrates several times, the vibration alarm will be triggered. If no ignition after 3 minutes (ACC OFF), the device will send vibration alarm message immediately. 5.6 Voice monitoring Use pre-set SOS number to dial the device. If no answering after 10 seconds, device changes to monitoring mode automatically. The caller, on the other hand, can hear the noise inside the vehicle. Device wont monitor when non-SOS number call in. Notice:

1. Pre-set SOS number is necessary 2. SIM card must have caller ID sevice 3. No external horn/speaker 5.7 Oil/Electricity cut-off When vehicle is stolen, oil/electricity cut-off command can be sent by platform, APP or SMS. Notice:

1. Make sure ACC is correctly connected. 2. When ACC is OFF, command will be executed immediately. 3. When ACC is ON, but GPS is not fixed, command will be postponed. 4. When ACC is ON, GPS is fixed, command will be executed when vehicle speed is less than 20km/h. 5.8 Restore oil/electricity When alarm is cancelled, user can send restore oil/electricity command by platform, APP or SMS and restore vehicle power. 5.9 Restart device If GPRS is abnormal (device is offline), user can send SMS command RESET# to restart the device. Device will reboot after 20 seconds after receive the command. 6Platform Operation Get registered on the designated service platform by authorized dealer, then you can start the tracking service and settings. 6.1 Login service platform Please login the designated sevice platform to set and operate the device. 6.2 Download APP Please download and install the APP in designated website, APP store or Google Play store. 7Command List 1 2 Check device status Get device GPS latitude/longitude STATUS#

WHERE#

3 4 5 6 7 8 9 10 11 Check device location in Google Map link URL#

1, Add SOS number:

SOS,A,number 1,number 2,number 3#

Example: SOS,A,12342***,134533***,135432***#

2, Delete subjected sequence of SOS number:

SOS,D,number sequence 1,number sequence 2, number sequence 3#

Example: SOS,D,1,2#

3, Delete the SOS number:

SOS,D,phone number#

4, Query SOS number: SOS#

TIMER,T1,T2#

T1=518000 secondsACC ON upload intervaldefault value10 T2=518000 secondsACC OFF upload intervaldefault value20 (when GPS is on) Example: TIMER,20,20#

DISTANCE,D#

D=05010000 meterDistance intervaldefault value300, unitmeter DEFENSE,A#

A:160 minutesset delayed defensedefault value10 minutes 1, SENALM,ON#

2, SENALM,OFF#

1, MOVING,ON,R,#

R=1001000; Movement radius, unit: meter Example: MOVING,ON,200,#

2, MOVING,OFF#

RELAY,A#

A=0/1 0: power on1: cut off powerdefault value0 Example: RELAY,1#

RESET#

Device restart 20 seconds after receiving this command SOS number setting GPS data upload time interval GPS data upload distance interval Delayed defense setting Vibration alarm Movement alarm

(Default OFF) Power/oil control Restart 8Trouble shooting If you are having trouble with your device, try these troubleshooting procedures before contacting a service professional. Problems Poor signal Causes The signal waves unable to transmit when use the GPS tracker in the places that have poor signal reception, such as:

tall or basement. Low battery Poor signal building around Unable to boot Unable to connect to the network Unable to locate Signal shielded or Poor signal No power off alarm Fail to start the car Car stops driving Abnormal power supply Power cutoff /ACC abnormal Built-in battery is off Solutions Using the GPS tracker in the places that have good signal condition. Charge the device battery Using the GPS tracker in the places that have good signal condition. Change the installation place Turn it on Restore power/Check ACC Connect the device negative electrode to constant power Check power supply/Press side key to activate indicators Test the device again/Change installation place Abnormal power supply/Indicators sleep No GPS positioning Overdue / Damaged SIM card Make a payment/Change SIM card Offline/Indicators off No update of vehicles location Power on, all light indicators are on for 3 minutes Warranty instructions and service 1. The warranty is valid only when the warranty card is properly completed, and upon presentation of the proof of purchase consisting of original invoice indicating the date of purchase, model and serial No.of the product. We reserve the right to refuse warranty if this information has been removed or changed after the original purchase of the product from the dealer. 2. Our obligations are limited to repair of the defect or replacement the defective part or at its discretion replacement of the product itself. 3. Warranty repairs must be carried out by our Authorized Service Centre. Warranty cover will be void, even if a repair has been attempted by any unauthorized service centre. 4. Repair or replacement under the terms of this warranty does not provide right to extension or renewal of the warranty period. 5. The warranty is not applicable to cases other than defects in material, design and workmanship. Maintenance Record Date Serviced by Product Model IMEI Number Fault Descriptions Comments ShenZhen Concox Information Technology CO.,Ltd Tel: +86 755 2912 1200 Fax: +86 755 2912 1290 E-mail: jason@concox.cn. Add: 4/F, Building B, Gaoxinqi Industrial Park, Liuxian 1st Road, No.67 Bao'an District, Shenzhen www.iconcox.com FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF Exposure Warning:

To comply with FCC RF exposure requirements, a minimum separation distance of 20cm between user and transmitter include its antenna must be maintained during normal operations.