M618MINI GX Driver Instruction 1. Installation Download the driver from or the CD in the package, install the driver. Note: Please make sure this mouse is already connected to computer when setting the functions in the driver. 2.Setting These functions can be customized as below for optional 800 /1200 /1600 1.5V 20mA Equipping the mouse with battery, insert the Nano receiver to the USB port of your computer, pushing the ON button on the bottom of the mouse, and the receiver will detect the device automatically, plug and play. The red light will flash once if you shift the DPI to the first gear, will flash twice when you shift the DPI to the second gear, etc. Also it will flash when the voltage is low. ON/OFF button 1. 2. 3.Macro setting:
Click Assign Macro to enter into Macro settings, click NEW and name the macro, and click Left click on any blank space below MACRO SELECT to confirm the name. Then Start Record, after finishing the record, please click STOP RECORD, and click OK to save the macro. After choosing certain macro, the background of this macro will turn green, you can edit the macro. 4.Other functions:
Basic: Cut, Copy, Paste, etc. 8 functions are available Advanced: Switch window, close window, etc. 6 functions are available Media:Previous track, next track, stop, etc. 7 functions are available You can also adjust the speed of tracking , double-click and scrolling After setting the functions please click Apply, if you need default functions just click Restore Defaults FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 3. 4. 5. 6. 1135x90mm(+/-1mm) 2100g 3 4 M618mini GX
/19.02.20