624 Smart Bracelet Users Manual

 

User Guide Smart Bracelet 1D128Color HR Thanks for choosing our device, please read the user guide carefully before using Use VeryFitPro on iOS or Android smart phone to set the wristband as follows:

Wo1e: hardware and systam of devices snouid meet the requirements:

@ 6

(OS8.08Above Androld4.4 & Above Support Bluetooth. 4 Download VeryFitPro Search and download Search and download "VeryFitPro" from the Apple Store or Android App store Scan the QR code and download probably has a problem lo open the link with WeChat or other scan tools, please copy tha link and open it through browser. 1 2. Product activation and installation The product must be activated by charging before initial use, and. then charge the product to ensure normal power supply, The hand ring wil automatically power on Take out: Pull open the strap ant take out tha bracalot body Charge the battery: Insert the chip-mountad end of the bracelet body into the USB interface to activate the product by charging (be cautlous ol fo reverse the polarity, and oomply with the required voltage and courant: SV / 500A)

=o Installation: Mount the bracelet body into th

\Weat on: Adjust the length ofthe wrist strap Until itis appropriate ta wear on the wirst

02 3. Touch key Single lick the touch key:

Interface sien Prass and hold the touch key 4. Make sure the Bluetooth of smart phone is ON, open app"VeryFitPro When selecting the right band from the search lst, please slide the screen of wristband to wake up the device and then complete connecting,

<now your Device 1. Wearing Method Wear the device on your wrist harizontally, about om to carpalithe same method as wearing Watches, 2. Heart Rate Monitoring To monitor Heart Rate more accurstely, please wear the davice on the Lupper position of your Wrist and a bit ighter than Usual when you are taking exercise, 3. Heart Rate Monitoring Automatic heart rate Monitoring Is ON all the day automatically, jefaut, monitor Hear Rate 4. Interface Click the touch key to display successively 30 :

Time Data Mode Heart Rata Alor Clock Sports Mada Mode Mode roduction 1.1 Time Mode Instructions Tinie dial can be switched a follows:

APP Devices Mode>More 3 i IClick the touch key] to enter the next mode:

Data Mose

(you can customize the shortcut through the app) 1.2 Data Mode

[click the touch Keyl to enter the next move Heart Rate Mode

[Press and hold the touch kay for 25)

{enter the sub-mode af "Data Reading on 1.24 Data Reading Sub-Mode

[Click the touch Kay] to enter the next subemade Nole: To go back to the Data Reading Mode by clicking the touch key on the:

final interface of Data Reading Sub-Mode:

1.3 Heart Rate Mode

a Bafore Data After Data Change in 0.8

\s Displayed \s Displayed Note: Upon staying at the Heart Rate interface for 1s, start to monitor the hart rate, and a fig. ike Is displayed before the correct data is monitored, and upon the correct data being monilored, data is displayed,

{Click the touch key] to enter the next mode: Alarm Clock Mode 1.4 Alarm Clock Mode Note: Alarm clock function should be turned

(on In App forthe alarm clack ta be displayed. 05

[Click the touch key] to enter the next mode:

Sports Mode

[Press and hold the touch kay for2s]

to starlclose alarm clock 1.5 Sports Mode

(Press and Wold the touch kay for 2s) to enter the Sparta Modo |

(Chek me toven kay] ta enter ine next sporss moda: ana in

{ane Ihave are no other sports modes, it wil go back to the Noto: Typos of Sports moda can be Selocted In App (APD. an handle 2 types af rack recording sports and +i types Fa ofotnor activities) 4.5.1 Sports Start Mode Hong:

1.5.2 Sports Underway Mode Hoan Rate Steps Calories Distance 06 aes 151) Pace/Speed Average pace Time

[Click the touch key] to enter the next sub-mode of Sports Underway [Press and hold the touch key for 2s}

tWaanter any interface of Data Reading, press and hold 28 to exit the sports mode. Note: The speed and distance of riding can be displayed, but App need tobe connected and the riding and App needs to start atthe same time, 1.5.3 Sports Stop Mode 1) Ifthe sports last less than 1 minute, the user will be reminded of not saving the data,

[Click the touch key] fo enter the main Inlerface of sports mode (the data reading Interface of sports data display mode is not sisplayed) 2) Ifthe sports last more than 1 minute, the Sports End Reminder will be displayed

{Click the touch key] to enter the sports data a display mode 3) Sports data display mode 345 Step, Distance Duration, Caloris Pao, Hart Rate

{Click the touch key] to enter the nest sports dala dleplay mode, and the single click of the final Interface will go back to the fist interface of sports mode, 1.5.4 Event Reminder in Sports Mode 1) Reminder of exiting from sports mode upon a period of no activity

{Click the touch koy] to remove the reminder of automatic quiting ftom sports mode, Note Lif there is no any activity ina period (15 minutes), reminder will be displayed 15s before t sop 2.Naw activities wil remove Ihe reminder of automatic quilting from the sports mode. lf thera are no any new operations before the end of the countdown of Aautornatic quilting from the sperts mode, it wil exit from the sparts mode, 2) Reminder of ful-ram force quit

[Click the touch Keyl to confirm the fulram. Note: When the memory of wrist strap i full Of sports data, the user will be reminded of exiting from the Sports Mode 08 3) Reminder of force quit for low-battery

{Click the touch Kay) to accept the foros quit from the sports mode Nota: During the sports activities, when the pawer i too tow, the sport mode will pause, and remind the user of force quit from the sports made, 4) Reminder of inaccessible sport mode for low-battery

[Click the touch key) to accept the inaccessible sports mode for jaw-battery Note: The reminder wil occur When a User tied to tart the sports made with the Battery of device is in tow. 1.5.5 Abnormal operations during activity The reminder will be available soon ib

[Click the touch key] to quit from the reminder waiting mode 09 1. Camera mode control Entry made: Start the camera entry by App, and the device wil get in the camera mode successfully holo taking methods: shake/Wrist iRing/liok the touch key Modas of exit 1. Press and hold the touch key to exit from the camera mode 2: Exit thraagh App will make the wnst strap quit from the camera mode. 2. More modes of reminders 1) Call Reminder

{Cick the touch kay fo remove the call reminder Press and hold the touch koy to hang Up the call Note: The call reminder in the App needs o.be set open:

In case of pagas of massages, Click the touch key to read the remained ones, Poa Note: The relevant settings need to done in the App. 10 3) Alarm Clock Alarm Glock: The relevant settings need to done in the App. Alarm Clock Types:

Wakeup Macicing taking Slaaping Party Appointment Exercise Meeting 4)Long Siting Reminder Alarm Clack Reminder: The relevant settings need to dona in the App Glick the touch Key: it will remave the MRM reminder

'5) Target completion reminder When some goals ara achieved, shake the wrist strap to get the interface of target campletion reminder displayed Gliok the ouch kay fa quit fram the reminsee 6) Low battery reminder Low-Battery! Please recharge timely!

7) Device Error Notification Note: When the deviea if detected with an abnormality the Interface hatein willbe displayed each time the device is opened,

-01 Status Code:

01 means the abnormality of accaleration sansa)

-02 means the abnormality of heart rate sensor

-D3 means the abnormality of touch kay IC

.04 means the abnormality of as Basic Specification Medel No 1D128Color HR. Battery Capacity! @0mAn Hos! weight: about 236 Syne: Bluetooth 4.0 Working temperature: 200-40 Working Time: Tdays Product frequency bind: 2402-2480MHz Maximum transmit power: 1-3645m The device meets the EU ROHS criterion, Ploase refer to IEC 62321, EU ROHS Directive, 2011/65/EU and revised directive RoHS Qe nd Maintenan

(Our products are designed for you to wear throughout he day. So please follow a few brief instructions when you are wearing and maintaining your smart devices. To keep your wristband clean and your skin comfortable, we put forward the following tps:

Regularly clean your wrist and the smart wristband, especially after sweating inthe exercise or baing exposed fo substances such as soap or detergent which may altach on the internal side of the wristband, Do not wash the wristband with hausehold cleanser Please use soapless detergent, rinse thoroughly and wipe with a piece of soft towel or napkin, For spots or stains that are not easy to remove, scrub with aleohal and then follow the above saps. Failed to find the device when pairing 1 Make sure the Biuelooth of smart phone is ON, and smart phon OS Android 4.4 & Anove, IOS 8.0 & Above,

#) Make sure the distance between phone and device is within 0.5meter, device is among the normal Bluetooth communication distance ranga(within 1Ometer) after pairing finished. 3) Make sure the davice is not under low battery I thar is stil a problem after fully charged, please contact us.

@ Failed to connect with Bluetoath occasionally Caused by the abnormality of Bluetooth service when it restarted om the ptione, Reboot mobile phone ar re-start the Bluetooth service, then i works normal

@ How lo restore factory defaults Make sure the device Is connected with smart phone, go in the App. enter device System setting, and choose reboot device This device complies with Part 15 of the FCC Rules. Operation is subject 1 the following two conditions:

() this device may not eause harmful interference, and

(2) this device must accept any interference received, inchading interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply wit the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference ina residential installation, This equipment generates, uses and can radiate radio frequency energy and, ifnot installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will nt occur in a particular installation If this equipment docs cause harmful interference to radio or television reception, which can be determined by tuming the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

~ Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver.

~ Connect the equipment into an outlet on circuit different from that to which the receiver is connected. Consult the dealer or an experienced radioTV technician for help. CAUTION

[RISK OF EXPLOSION IF BATTERY IS REPLACED RYAN INCORRECT TYPE DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

(Old electrical appliances must not be disposed of together ith the residual waste, but have to be disposed of separately. The disposal atthe communal collecting point via private persons is fo fee, The owner of old appliances WER esponsble to bring the appliances to these collecting points or to similar collection points, With this litle personal effort, you contribute to reeycle valuable raw materials and the treatment of foxic substances. 15