ID130PLUSCOLOR Smart Bracelet User Manual

 

User Guide Smart Bracelet Setting Use VeryFitPro on iOS or Android smart phone to set the wristband as follows:

Note: hardware and system of devices should meet the requirements:

2Product activation and installation The product must be activated by charging before initial use, and then charge the product to ensure normal power supply. The hand ring will automatically power on. Take out: Pull open the strap and take out the bracelet body 3Touch key Single click the touch key:

Interface switch Press and hold the touch key:

Enter 4Working Time Continuously working for 8 days under normal conditions 5Interface Click the touch key to display successively iOS 7.0 & Above Android4.4 & Above Support Bluetooth4.0 1Download VeryFitPro Search and download Search and download VeryFitPro from the Apple Store or Android App store . Scan the QR code and download It probably has a problem to open the link with WeChat or other scan tools, please copy the link and open it through browser. 4Make sure the Bluetooth of smart phone is ON, open appVeryFitPro Charge the battery: Insert the chip-mounted end of the bracelet body into the USB interface to activate the product by charging (be cautious not to reverse the polarity, and comply with the required voltage and current: 5V / 500mA) Add Device Detection failed,please re search

When selecting the right band from the search list, please slide the screen of wristband to wake up the device and then complete connecting. Installation: Mount the bracelet body into the slot of the wrist strap. Know your Device 1Wearing Method Time Data Mode Heart Rate Mode Alarm Clock Mode Sports Mode Function Introduction 1.1 Time Mode Instructions Time dial can be switched as follows:

APP Devices Mode>More

[Click the touch key] to enter the next mode:

Data Mode you can customize the shortcut through the app Wear the device on your wrist horizontally, about 2cm to carpal,the same method as wearing watches. 1.2 Data Mode 1.2.1 Data Reading Sub-Mode

[Click the touch key] to enter the next sub-mode NoteTo go back to the Data Reading Mode by clicking the touch key on the final interface of Data Reading Sub-Mode

[Click the touch key] to enter the next mode:

Sports Mode

[Press and hold the touch key for 2s]

to start/close alarm clock 1.3 Heart Rate Mode 1.5 Sports Mode

[Press and hold the touch key for 2s] to enter the Sports Mode

[Click the touch key] to enter the next sports mode; and in case there are no other sports modes, it will go back to the time mode. Note: Types of Sports mode can be selected in App (App can handle 4 types of track recording sports and 10 types of other activities) Before Data Is Displayed After Data Is Displayed Change in 0.5s 1.5.1 Sports Start Mode Note: Upon staying at the Heart Rate interface for 1s, start to monitor the heart rate, and a fig. like is displayed before the correct data is monitored, and upon the correct data being monitored, data is displayed.

[Click the touch key] to enter the next mode: Alarm Clock Mode After the countdown interface of 3-2-1-GO is the sports underway mode. 1.4 Alarm Clock Mode 1.5.2 Sports Underway Mode ID130Plus Color HR Thanks for choosing our device, please read the user guide carefully before using. Wear on: Adjust the length of the wrist strap until it is appropriate to wear on the wirst. 2Heart Rate Monitoring To monitor Heart Rate more accurately, please wear the device on the upper position of your wrist and a bit tighter than usual when you are taking exercise. 3Heart Rate Monitoring Automatic heart rate Monitoring is ON as default, monitor Heart Rate all the day automatically.

[Click the touch key] to enter the next mode:

Heart Rate Mode

[Press and hold the touch key for 2s]

to enter the sub-mode of Data Reading Note: Alarm clock function should be turned on in App for the alarm clock to be displayed. Heart Rate Steps Calories Mile Average pace Pace/Speed Pm Step, Distance Duration, Calories Pace, Heart Rate 4Reminder of inaccessible sport mode for low-battery 3Reminder of force quit for low-battery

[Click the touch key] to accept the force quit from the sports mode Note: During the sports activities, when the power is too low, the sport mode will pause, and remind the user of force quit from the sports mode. 1. Camera mode control 3Alarm Clock 6Low battery reminder Entry mode: Start the camera entry by App, and the device will get in the camera mode successfully. Photo taking methods: shake/wrist lifting/click the touch key Alarm Clock: The relevant settings need to done in the App. or Low-Battery! Please recharge timely!

7Device Error Notification

[Click the touch key] to enter the next sub-mode of Sports Underway[Press and hold the touch key for 2s]

to enter any interface of Data Reading, press and hold 2s to exit the sports mode. Note: The speed and distance of riding can be displayed, but App need to be connected and the riding and App needs to start at the same time. 1.5.3 Sports Stop Mode 1If the sports last less than 1 minute, the user will be reminded of not saving the data.

[Click the touch key] to enter the main interface of sports mode (the data reading interface of sports data display mode is not displayed) 2If the sports last more than 1 minute, the Sports End Reminder will be displayed

[Click the touch key] to enter the sports data display mode 3Sports data display mode

[Click the touch key] to enter the next sports data display mode, and the single click of the final interface will go back to the first interface of sports mode. 1.5.4 Event Reminder in Sports Mode 1Reminder of exiting from sports mode upon a period of no activity

[Click the touch key] to remove the reminder of automatic quitting from sports mode. Note 1.If there is no any activity in a period (15 minutes), reminder will be displayed 15s before it stop. 2.New activities will remove the reminder of automatic quitting from the sports mode. 3.If there are no any new operations before the end of the countdown of automatic quitting from the sports mode, it will exit from the sports mode. 2Reminder of full-ram force quit

[Click the touch key] to confirm the full-ram Force Quit Note: When the memory of wrist strap is full of sports data, the user will be reminded of exiting from the Sports Mode

[Click the touch key] to accept the inaccessible sports mode for low-battery Note: The reminder will occur when a user tried to start the sports mode with the battery of device is in low. Modes of exit:

1. Press and hold the touch key to exit from the camera mode 2. Exit through App will make the wrist strap quit from the camera mode. 2. More modes of reminders 1Call Reminder 1.5.5 Abnormal operations during activity Uif!sfnjoefs!xjmm!cf!bwbjmbcmf!tppo Click the touch key to remove the call reminder Press and hold the touch key to hang up the call Note: The call reminder in the App needs to be set open. Appointment Exercise Meeting 4)Long Sitting Reminder Alarm Clock Reminder: The relevant settings need to done in the App.. Click the touch key: It will remove the reminder. 2Message Reminder 5) Target completion reminder

[Click the touch key] to quit from the reminder waiting mode In case of pages of messages, Click the touch key to read the remained ones. Note: The relevant settings need to done in the App. When some goals are achieved, shake the wrist strap to get the interface of target completion reminder displayed Click the touch key to quit from the reminder Status Code:

-01 means the abnormality of acceleration sensor

-02 means the abnormality of heart rate sensor

-03 means the abnormality of touch key IC

-04 means the abnormality of flash Basic Specifications Model No.: ID130Plus Color HR Battery Capacity: 70mAh Working Voltage: 3.7V Host weight: about 22.5g Sync: Bluetooth 4.0 Working temperature: 10- 45 Waterproof: IP67 Working Time: 7days Product frequency band: 2402-2480MHz Maximum transmit power: -4.05dBm Alarm Clock Types:

Wake up Medicine taking Sleeping Party Note: When the device is detected with an abnormality, the interface herein will be displayed each time the device is opened. dou Declaration of toxic and hazardous substances in electronic information products s The device meets the EU ROHS criterion. Please refer to IEC 62321, EU ROHS Directive 2011/65/EU and revised directive. e EU 2321 sed d FAQ Failed to find the device when pairing Make sure the Bluetooth of smart phone is ON, and smart phone OS Android 4.4 & Above, iOS 7.0 & Above. Make sure the distance between phone and device is within 0.5meter, device is among the normal Bluetooth communication distance range(within 10meter) after pairing finished. Make sure the device is not under low battery. If there is still a problem after fully charged, please contact us. Failed to connect with Bluetooth occasionally Caused by the abnormality of Bluetooth service when it restarted on the phone. Reboot mobile phone or re-start the Bluetooth service, then it works normal. How to restore factory defaults Make sure the device is connected with smart phone, go in the App, enter device-- System setting, and choose reboot device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances. 12 13 14 15 16 17 18 19 1:

21 22 23 24 25