W17BTA Mono Bluetooth Speaker Manual

User Manual Speaker Overview Play MONO Bluetooth speaker R Model: BWB15AV202 BWB15AV203 PRODUCT GUIDE 1.Power ON/OFF Switch 2.Speaker Mode Switch 3.Speaker phone 4.Volume up 5.Play/Pause 6.Volume down 7.Charging port 8.AUX-IN Thank you for purchasing the Speck Bluetooth Speaker for smart phones, tablets, notebook computers and other Bluetooth enabled devices. This product combines high-tech innovation with design to provide you with years of dependability and enjoyment. R Safety Precautions and Maintenance Please read these operating and maintenance (servicing) instructions before installing and operating your speaker. Package Contents Main unit x 1 User manual x 1 USB Charging Cord x 1 Now you can begin to play music on your speaker. Press - + to adjust volume, and press to Pause or Play. Charge Warning: To reduce the risk of re or electric shock, do not expose this speaker system to rain or moisture (including swimming pools or objects lled with liquids, such as vases or drinks). Important Safety Instructions 1. Always read Safety and Operation instructions before use. Retain instructions for later reference. 2. For indoor use only. Do not expose the speaker to liquid, moisture or humidity. 3. Do not use abrasive cleaners to clean the speaker case as they may damage the nish. Always unplug the unit before cleaning. 4. Do not expose the speaker to extremely high or low temperatures. 5. Keep the unit away from direct sunlight. 6. Use only accessories and attachments as supplied and designated in the instruction manual. 7. Do not attempt to open or modify the speaker in any way, as it does not contain any serviceable parts. Please refer all servicing to qualied personnel. 8. Please store the unit in a dry place that is free from extreme temperatures and dust. 9. Always operate the speaker on a at and level surface. 10. Always operate the speaker away from children and small animals as they may play with the power cord and other small parts. 11. Always dispose of the packaging and the unit in accordance with the local regulations and in a responsible manner. The FCC Wants You To Know Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Can be charged by using the USB to Micro USB cord (included) through computer or AC adaptor with USB jack (not included). Approximately 3 hours required for full charge.Note: Battery will last up to 5 hours when connected wirelessly. Bluetooth connect Aux in Move the speaker mode switch to Mono. Press and hold to switch on, press and hold to switch o. Use a 3.5mm cable (not included) to connect the speaker to another audio source. Press Play on the device and adjust the volume on the unit to obtain the desired volume. SPECK Extra:-- Pairing 2 SPECK Speakers together(Stereo):

On the Bluetooth device, switch on Bluetooth and search for SPECK. For the rst time connection, select SPECK to start connection. After your connection is successful, you will hear Your device is connected. Conference Mode 1. Turn the speaker over and move the speaker mode switch to L. 2. Turn the 2nd speaker over and move the speaker mode switch to R. 3. Press and hold the power button for 5 seconds on the 1st speaker. 4. Press and hold the power button for 5 seconds on the 2nd speaker. 5. The two speakers will begin to pair together automatically. 6. Pairing process can take up to 30 seconds. When you hear a Steel Drum tone and the SPECK 2 indicator light begins to slowly blink, you are ready to pair to your device. 7. Follow the instructions of your device to pair the speakers. 8. Pair your device with speakers by selecting SPECK 2 from the Bluetooth listings on your device. Technical Specications Amplier power: 2.8W Battery type: Li-ion rechargeable Bluetooth transmitter frequency range: 2.402 2.480GHz Bluetooth transmitter power: 0 4dBm FCC Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. When receiving an incoming call on your cell phone via Bluetooth linked with the speaker, tap to answer. Press - + to obtain the desired sound level. To end the call, just tap the PHONE on the speaker. To ignore an incoming call, simply press and hold the on the speaker for about 2 seconds.