| submitted | available | document details (if available) | source link |
|---|---|---|---|
| May 20 2015 | May 20 2015 | Microsoft Word - User Manual-高清室外机型共用V2.8_A118_add 9900P_.doc SZ079 Acrobat Distiller 7.0 (Windows) |
| various | User Manual Part Four | Users Manual | 767.38 KiB | May 20 2015 |
wwwwww..ffoossccaamm..ccoomm Figure 4.74 CAUTION:
If your camera works well with the current firmware, we recommend not upgrading. Please dont upgrade the firmware unnecessarily. Your camera may be damaged if mis-configured during an upgrade. NOTE:
1) Dont upgrade the firmware through the web UI in WAN, or else the upgrade may be failed. 2) Please ensure you have download the correct firmware package for your camera before upgrading. Read the upgrade documentation (readme.txt file) in the upgrade package before you upgrade. 3) Upon downloading the firmware check the sizes of the .bin files. They must match the size in the readme.txt file. If not, please download the firmware again until the sizes are the same. Your camera will not function correctly if a corrupt .bin file is used. 4) Normally, only Device WEB UI need to be upgrade, please do not try to upgrade the Device Firmware. 5) Never shut down the power of the camera during upgrade until the IP camera restart and get connected. 6) After upgrade successfully, please clear the cache of browser, uninstall the old plugin and re-install it, then reset the camera to the default factory settings before using the camera. 4.10.3 Patch Installation Click "Browse" to select the correct patch file, and then click "Install Patch" to install the patch. Do not turn off the power during it installing. After installing is complete, you will receive a system prompt. SShheennzzhheenn FFoossccaamm IInntteelllliiggeenntt TTeecchhnnoollooggyy CCoo..,, LLiimmiitteedd 72 TTeell:: 8866 775555 22667744 55666688 FFaaxx:: 8866 775555 22667744 55116688 wwwwww..ffoossccaamm..ccoomm 4.10.4 Factory Reset Figure 4.75 Click Factory Reset button and all parameters will return to factory settings if selected. The default administrator username is admin with a blank password. Figure 4.76 4.10.5 Reboot Click Reboot to reboot the camera. This is similar to unplugging the power to the camera. Figure 4.77 5 Playback(FI9803EP/FI9900P) On this page you can view the record files stored in the SD card. SShheennzzhheenn FFoossccaamm IInntteelllliiggeenntt TTeecchhnnoollooggyy CCoo..,, LLiimmiitteedd 73 TTeell:: 8866 775555 22667744 55666688 FFaaxx:: 8866 775555 22667744 55116688 wwwwww..ffoossccaamm..ccoomm Section 1 Define the Record files time and Type
: The storage path of record files
: Here supports three types: current day, current month and All records. Another way, select the time on the time&date manually.
: The type of records files, Here supports two typs: Normal record, Alarm record and All records.
: Click this button to search all record files satisfy the conditions you selected. Continuous Play: Select the checkbox to play continuously all the record files. Section 2 Search record files On this panel you can see all record files satisfy the conditions you set. Section 3 Play/Stop/Audio/Full screen buttons Please select one record file before use these buttons. SShheennzzhheenn FFoossccaamm IInntteelllliiggeenntt TTeecchhnnoollooggyy CCoo..,, LLiimmiitteedd 74 TTeell:: 8866 775555 22667744 55666688 FFaaxx:: 8866 775555 22667744 55116688 Click this button to play the record files Click this button to stop the record files Open or stop audio wwwwww..ffoossccaamm..ccoomm Click this button to make full screen, and double click left mouse to exit full screen. 6 Appendix 6.1 Frequently Asked Questions 6.1.1 Install the ActiveX of Firefox browser, Google Chrome and IE Chrome. Figure 6.1 SShheennzzhheenn FFoossccaamm IInntteelllliiggeenntt TTeecchhnnoollooggyy CCoo..,, LLiimmiitteedd 75 TTeell:: 8866 775555 22667744 55666688 FFaaxx:: 8866 775555 22667744 55116688 wwwwww..ffoossccaamm..ccoomm Figure 6.2 Figure 6.3 SShheennzzhheenn FFoossccaamm IInntteelllliiggeenntt TTeecchhnnoollooggyy CCoo..,, LLiimmiitteedd 76 TTeell:: 8866 775555 22667744 55666688 FFaaxx:: 8866 775555 22667744 55116688 wwwwww..ffoossccaamm..ccoomm Figure 6.4 Figure 6.5 SShheennzzhheenn FFoossccaamm IInntteelllliiggeenntt TTeecchhnnoollooggyy CCoo..,, LLiimmiitteedd 77 TTeell:: 8866 775555 22667744 55666688 FFaaxx:: 8866 775555 22667744 55116688 wwwwww..ffoossccaamm..ccoomm Figure 6.6 6.1.2 Uninstall the ActiveX of Firefox browser, Google Chrome and IE Chrome. SShheennzzhheenn FFoossccaamm IInntteelllliiggeenntt TTeecchhnnoollooggyy CCoo..,, LLiimmiitteedd 78 TTeell:: 8866 775555 22667744 55666688 FFaaxx:: 8866 775555 22667744 55116688 wwwwww..ffoossccaamm..ccoomm Figure 6.7 Figure 6.8 SShheennzzhheenn FFoossccaamm IInntteelllliiggeenntt TTeecchhnnoollooggyy CCoo..,, LLiimmiitteedd 79 TTeell:: 8866 775555 22667744 55666688 FFaaxx:: 8866 775555 22667744 55116688 wwwwww..ffoossccaamm..ccoomm Figure 6.9 6.1.3 I have forgotten the administrator password To reset the administrator password, you had better unplug the network cable firstly. After that, press and hold down the RESET BUTTON about 5 seconds. Releasing the reset button, the password will turn to the factory default. Default administrator username/password: admin with blank password 6.1.4 Subnet doesnt match Check whether your ip camera in the same subnet of your computer. The step is Control Panel -- Network Connections -- Dbclick Local Area Connections -- Choose General -- Properties. Check subnet mask, IP address and gateways. When you set IP address please make sure they are in the same subnet. Otherwise you can't access camera. 6.1.5 Camera can not record Camera can not record when I click Record button or I cant change the manually record path. When you use Windows7 or Vista, you may be not able to do manually record or change the record path because of the security settings of computer. There are two ways to resolve this problem:
1 Please add the camera as a trusted site to resolve this issue. The steps are IE browser--Tool--Internet Properties--Security--Trusted sites--Sites--Add 2 Open IE browser, then right click, select Run as administrator 6.1.6 No Pictures Problems The video streaming is transmitted by the ActiveX controller. If ActiveX controller isnt installed correctly you will see no video image. You can resolve this problem by this way:
Download ActiveX controller and set the safety property of IE in the PC when you view it first time: IE SShheennzzhheenn FFoossccaamm IInntteelllliiggeenntt TTeecchhnnoollooggyy CCoo..,, LLiimmiitteedd 80 TTeell:: 8866 775555 22667744 55666688 FFaaxx:: 8866 775555 22667744 55116688 browser--Tool--Internet Proper--Security--Custom Level--ActiveX control and Plug-ins. Three options of front should be set to be Enable, The ActiveX programs read by the computer will be stored. As follows:
Enable: Download unsigned ActiveX controls Enable: Initialize and script ActiveX controls not marked as safe Enable: Run ActiveX controls and plug-ins wwwwww..ffoossccaamm..ccoomm If you allow the ActiveX running, but still could not see living video. Please change another port number to try. Dont use port 8000. Figure 6.10 Figure 6.11 NOTE: Make sure that your firewall or anti-virus software does not block the camera or ActiveX. If you could not see video, please shut down firewall or anti-virus software to try again. 6.1.7 Cant access IP camera in internet There are some reasons:
1 ActiveX controller is not installed correctly 2 The port which camera used is blocked by Firewall or Anti-virus software. Please change another port number and try again. SShheennzzhheenn FFoossccaamm IInntteelllliiggeenntt TTeecchhnnoollooggyy CCoo..,, LLiimmiitteedd 81 TTeell:: 8866 775555 22667744 55666688 FFaaxx:: 8866 775555 22667744 55116688 3 Port forwarding is not successful. Check these settings and make sure they are correct. 6.1.8 UPnP always failed wwwwww..ffoossccaamm..ccoomm UPnP only contains port forwarding in our recent software. Sometimes, it may be failed to do port forwarding automatically because of firewall or anti-virus software. It also has much relation with routers security settings. So we recommend you do port forwarding manually. You can view your camera in internet successfully after you do port forwarding manually in your router. 6.1.9 Camera can not connect wireless If your camera could not connect wireless after you set wireless settings and plug out the cable. Please check whether your settings are correct or not. Normally, camera cant connect wireless mainly because of wrong settings. Make sure broadcast your SSID; use the same encryption for router and camera. 6.2 Default Parameters Default network Parameters IP address: obtain dynamically Subnet mask: obtain dynamically Gateway: obtain dynamically DDNS: Embedded FOSCAM DDNS Service Username and password Default admin username: admin with a blank password 6.3 Specification ITEMS Image Sensor Lens FI9803P High Definition Color CMOS Sensor Sensor 1.0 Megapixels Display Resolution 0 Lux (With IR Illuminator) Min. Illumination Glass Lens Lens Type f:2.8mm focal length F1.2 Aperture Diagonal angle of view 75 70 Horizontal view angle Image Compression H.264 23fps(1280 x 720), 25fps(VGA),25fps(QVGA) Image Frame Rate dual stream Stream Image adjustment The hue, brightness, contrast, saturation, sharpness are SShheennzzhheenn FFoossccaamm IInntteelllliiggeenntt TTeecchhnnoollooggyy CCoo..,, LLiimmiitteedd 82 TTeell:: 8866 775555 22667744 55666688 FFaaxx:: 8866 775555 22667744 55116688 wwwwww..ffoossccaamm..ccoomm Video Network System Requirements Other Features Power Physical Environment Certification Warranty ITEMS Image Sensor adjustable flip and mirror Automatic or manual With 1 Infrared Lamp Array, Night Vision Range up to 20m One 10/100Mbps RJ45 port IEEE 802.11b/g/n IEEE802.11b: 11Mbps(Max.);
IEEE802.11g: 54Mbps(Max.);
IEEE802.11n: 150Mbps(Max.). WEP, WPA, WPA2 P2P DDNS IP, TCP, UDP, HTTP, HTTPS, SMTP, FTP, DHCP, DDNS, UPnP, RTSP, ONVIF Microsoft Windows 2000/XP, Vista, 7,8;
Mac OS Microsoft IE8 and above version or compatible browser;
Mozilla Firefox;
Google Chrome;
Apple Safari. Alarm via E-Mail, upload alarm snapshot to FTP Three levels user role Supports IP Filtering Reset button is available DC 12V/1.0A 4.2 Watts (Max.) 153(L)x 92(W)x 86(H) 380g
-20C ~ 60C (-4F ~ 140F) 10% ~ 80% non-condensing
-20C ~ 60C (-4F ~ 140F) 0% ~ 90% non-condensing Flip image Infrared mode Night visibility Ethernet Wireless Standard Data Rate Wireless Security Remote Access Network Protocol Operating System Browser Motion Detection User Accounts Firewall Reset Power Supply Power Consumption Dimension(mm) Net Weight Operating Temperature Operating Humidity Storage Temperature Storage Humidity ICCSACE, FCC, RoHS Limited 2-year warranty Sensor Display Resolution Min. Illumination Lens Type focal length FI9803EP High Definition Color CMOS Sensor 1.0 Megapixels 0 Lux (With IR Illuminator) Glass Lens f: 4mm(option 2.8mm,6mm,8mm) SShheennzzhheenn FFoossccaamm IInntteelllliiggeenntt TTeecchhnnoollooggyy CCoo..,, LLiimmiitteedd 83 TTeell:: 8866 775555 22667744 55666688 FFaaxx:: 8866 775555 22667744 55116688 wwwwww..ffoossccaamm..ccoomm Aperture F1.2 Diagonal angle of view 75 70 Horizontal view angle H.264 Image Compression Image Frame Rate 30fps(60Hz), 25fps(50Hz), downward adjustable 720P(1280 x 720), VGA(640 x 480), QVGA(320 x 240) Resolution dual stream Stream Image adjustment The hue, brightness, contrast, saturation, sharpness are adjustable flip and mirror Automatic or manual Infrared lamp array, night vision range up to 20 meters One 10/100Mbps RJ45 port P2P DDNS IEEE. 802.3af IP, TCP, UDP, HTTP, HTTPS, SMTP, FTP, DHCP, DDNS, UPnP, RTSP, ONVIF Microsoft Windows 2000/XP, Vista, 7;
Mac OS Flip image Infrared mode Night visibility Ethernet Remote Access PoE Network Protocol Operating System Browser Motion Detection Privacy Block User Accounts Firewall Storage Reset Power Supply Power Consumption Dimension(mm) Net Weight Operating Temperature Operating Humidity Storage Temperature Storage Humidity CE, FCC, RoHS Limited 2-year warranty Microsoft IE8 and above version or compatible browser;
Mozilla Firefox;
Google Chrome;
Apple Safari. Alarm via E-Mail, upload alarm snapshot to FTP Set privacy area manually Three levels user role Supports IP Filtering SD card and local storage Reset button is available DC 12V/1.0A 4.2 Watts (Max.) 153(L)x 92(W)x 86(H) 380g
-20C ~60C (-4F ~ 140F) 10% ~ 80% non-condensing
-20C ~ 60C (-4F ~ 140F) 0% ~ 90% non-condensing Lens Video Network System Requirements Other Features Power Physical Environment Certification Warranty ITEMS FI9903P SShheennzzhheenn FFoossccaamm IInntteelllliiggeenntt TTeecchhnnoollooggyy CCoo..,, LLiimmiitteedd 84 TTeell:: 8866 775555 22667744 55666688 FFaaxx:: 8866 775555 22667744 55116688 wwwwww..ffoossccaamm..ccoomm Image Sensor Lens Video Network System Requirements Other Features Physical Environment Certification Warranty High Definition Color CMOS Sensor Sensor 1920 x 1080 (2.0M Pixels) Display Resolution 0 Lux (With IR Illuminator) Min. Illumination Glass Lens Lens Type f:4mm6mm/8mm/12mm Opention focal length Aperture F1.2 Diagonal angle of view 75 Horizontal view angle 70 H.264 Image Compression 30fps(60Hz), 25fps(50Hz), downward adjustable Image Frame Rate Resolution 1080P(1920x1080),720P(1280 x 720), VGA(640 x 480), QVGA(320 x 240) dual stream The hue, brightness, contrast, saturation, sharpness are adjustable flip and mirror Automatic or manual With 2 Infrared Lamp Array, Night Vision Range up to 30m One 10/100Mbps RJ45 port P2P DDNS IP, TCP, UDP, HTTP, HTTPS, SMTP, FTP, DHCP, DDNS, UPnP, RTSP, ONVIF Microsoft Windows 2000/XP, Vista, 7,8;
Mac OS Ethernet Remote Access Network Protocol Flip image Infrared mode Night visibility Stream Image adjustment Operating System Browser Motion Detection Privacy Block User Accounts Firewall Reset Dimension(mm) Net Weight Power Consumption Operating Temperature Operating Humidity Storage Temperature Storage Humidity CE, FCC, RoHS Limited 2-year warranty Microsoft IE8 and above version or compatible browser;
Mozilla Firefox;
Google Chrome;
Apple Safari. Alarm via E-Mail, upload alarm snapshot to FTP Set privacy area manually Three levels user role Supports IP Filtering Reset button is available 153(L)x 92(W)x 86(H) 380g
<14 Watts
-20C ~ 60C (-4F ~ 140F) 10% ~ 80% non-condensing
-20C ~ 60C (-4F ~ 140F) 0% ~ 90% non-condensing SShheennzzhheenn FFoossccaamm IInntteelllliiggeenntt TTeecchhnnoollooggyy CCoo..,, LLiimmiitteedd 85 TTeell:: 8866 775555 22667744 55666688 FFaaxx:: 8866 775555 22667744 55116688 wwwwww..ffoossccaamm..ccoomm ITEMS Image Sensor Lens Video Audio Network System Requirements Other Features FI9804W Flip image Infrared mode Night visibility Input/Output Audio Compression Ethernet Wireless Standard Data Rate Sensor High Definition Color CMOS Sensor Display Resolution 1.0 Megapixels Min. Illumination 0 Lux (With IR Illuminator) Lens Type Glass Lens focal length f:2.8mm Aperture F1.2 Diagonal angle of view 75 70 Horizontal view angle Image Compression H.264 30fps(60Hz), 25fps(50Hz), downward adjustable Image Frame Rate 720P(1280 x 720), VGA(640 x 480), QVGA(320 x 240) Resolution Stream dual stream The hue, brightness, contrast, saturation, sharpness are Image adjustment adjustable flip and mirror Automatic or manual 12pcs IR-LEDs, night vision range up to 20 metres External standard 3.5mm interface for two-way audio PCM/G.726 One 10/100Mbps RJ45 port IEEE802.11b/g/n IEEE802.11b: 11Mbps(Max.);
IEEE802.11g: 54Mbps(Max.);
IEEE802.11n: 150Mbps(Max.). WEP, WPA, WPA2 IP, TCP, UDP, HTTP, HTTPS, SMTP, FTP, DHCP, DDNS, UPnP, RTSP, ONVIF Microsoft Windows 2000/XP, Vista, 7;
Mac OS iOS, Android Microsoft IE8 and above version or compatible browser;
Mozilla Firefox;
Google Chrome;
Apple Safari. Alarm via E-Mail, upload alarm snapshot to FTP Set privacy area manually Three levels user role Supports IP Filtering Reset button is available Motion Detection Privacy Block User Accounts Firewall Reset Wireless Security Network Protocol Operating System Browser SShheennzzhheenn FFoossccaamm IInntteelllliiggeenntt TTeecchhnnoollooggyy CCoo..,, LLiimmiitteedd 86 TTeell:: 8866 775555 22667744 55666688 FFaaxx:: 8866 775555 22667744 55116688 wwwwww..ffoossccaamm..ccoomm Power Physical Environment Certification Warranty Power Supply Power Consumption Dimension(mm) Gross Weight Net Weight Operating Temperature Operating Humidity Storage Temperature Storage Humidity CE, FCC, RoHS Limited 2-year warranty DC 12V/1.0A 5.5 Watts (Max.) 132(L)x 72(W)x 80(H) 1186.8g 870g
-20C~ 60C (-4F ~ 140F) 10% ~ 80% non-condensing
-20C ~ 60C (-4F ~ 140F) 0% ~ 90% non-condensing Specification Image Sensor Lens Video Network Alarm Hardware Interface Environment Image Sensor Display Resolution Mini. Illumination focal length Aperture Diagonal angle of view Horizontal view angle Resolution View Image adjust Infrared mode Night visibility Ethernet Supported Protocol Wireless Standard Support IP address Alarm detection Alarm inform POWER Interface Audio Input/Output Interface Reset Buttons Operate Temper Operate Humidity Storage Temper FI9805W High Definition Color CMOS Sensor 1.3 Megapixels 0 Lux (With IR Illuminator) f 4mm F1.2 75 70 960p(1280 x 960), 720p(1280 x 720), VGA(640 x 480) H.264 dual streaming The brightness, contrast, saturation, chromaticity, is adjustable Off & Manually 8mm 36 IR LEDs, Night visibility up to 30 meters One 10/100Mbps RJ-45 TCP/IP, UDP/IP, HTTP, SMTP, RTSP,HTTPS, DDNS, UPNP, ONVIF WIFI(IEEE802.11b/g/n) static IP address, dynamic IP address The motion detecting Support EmailFTP etc alarm inform way DC 12V/2.0A (EU,US,AU adapter or other types option), Power Consumption 8 Watts FTP, DHCP, One audio input jack, One audio output jack. One Reset
-20C ~ 60C (-4F ~ 140F) 10% ~ 80% non-condensing
-20C ~ 60C(-4F ~ 140F) SShheennzzhheenn FFoossccaamm IInntteelllliiggeenntt TTeecchhnnoollooggyy CCoo..,, LLiimmiitteedd 87 TTeell:: 8866 775555 22667744 55666688 FFaaxx:: 8866 775555 22667744 55116688 wwwwww..ffoossccaamm..ccoomm PC Storage Humidity Dimension(mm) Net Weight CPU Memory Size Display Card Requirements Supported OS Browser 0% ~ 90% non-condensing 180(L)x 98(W)x 103(H) 1300g 2.0GHZ or above (suggested 3.0GHz) 256MB or above (suggested 1.0GHz) 64M or above Microsoft Windows 2000/XP, Vista, 7;
Mac OS iOS, Android IE8 and above version or compatible browser, Firefox, Chrome, Safari or other standard browsers Upgrade from network Upgrade ICCE, FCC, RoHS Limited 2-year warranty Software Certification Warranty Specification Image Sensor Lens Image Sensor Lens Mini. Illumination Lens Type IR_CUT Diagonal angle of view Horizontal view angle Audio Input/Output Image Compression Image Frame Rate Resolution View Image adjust Infrared mode Night visibility Ethernet Supported Protocol Support IP address Alarm detection Video Network Alarm FI9805E High Definition Color CMOS Sensor f : 4mm 0 Lux (With IR Illuminator) Glass Lens Filter can switch automatically 75 70 Linear Input/Output, which can realize two-way voice the intercom H.264 25fps(50Hz), 30fps(60Hz),Down adjustable 960p(1280 x 960),720p(1280 x 720),VGA(640 x 480), H.264 dual streaming The brightness, contrast, saturation, chromaticity, is adjustable Auto & Manually 8mm 36 IR LEDs, Night visibility up to 30 meters One 10/100Mbps RJ-45 TCP/IP, UDP/IP, HTTP, SMTP, FTP, DHCP, DDNS,UPNP, ONVIF static IP address, dynamic IP address The motion detecting I/O alarm SShheennzzhheenn FFoossccaamm IInntteelllliiggeenntt TTeecchhnnoollooggyy CCoo..,, LLiimmiitteedd 88 TTeell:: 8866 775555 22667744 55666688 FFaaxx:: 8866 775555 22667744 55116688 wwwwww..ffoossccaamm..ccoomm Support EmailFTPI/O output alarm etc alarm inform way DC 12V/2.0A (EU,US,AU adapter or other types option), Power Consumption 8 Watts One audio input jack, One audio output jack. One Reset External Input / output terminal block one RS - 485 port, support of transparent channel transmission IEEE 802.3af DC 36V~DC 57V DC 12V/2.0A 15.4W (Max.) 100M BASE-T
-20C ~ 60C (-4F ~ 140F) 20% ~ 85% non-condensing
-20C ~ 60C (-4F ~ 140F) 0% ~ 90% non-condensing 245(L)X196(W)X112(H)mm. 900g 1150g 2.0GHZ or above (suggested 3.0GHz) 256MB or above (suggested 1.0GHz) 64M or above Microsoft Windows 2000/XP, Vista, 7;
Mac OS iOS, Android IE8 and above version or compatible browser, Firefox, Chrome, Safari or other standard browsers Upgrade from network Alarm inform POWER Interface Audio Input/Output Interface Reset Buttons I/O alarm interface Control Interface PoE Standard Input Voltage Output Voltage Output Power Wiring standards Operate Temper Operate Humidity Storage Temper Storage Humidity Dimension Net Weight Gross Weight CPU Memory Size Display Card Supported OS Browser Upgrade CE,FCC,RoHS Limited 2-year warranty Sensor Display Resolution Min. Illumination Lens Type focal length Aperture Diagonal angle of view FI9900P High Definition Color CMOS Sensor 1920 x 1080 (2.0M Pixels) 0 Lux (With IR Illuminator) Glass Lens f:2.8mm F1.2 75 Hardware Interface PoE Environment PC Requirements Software Certification Warranty ITEMS Image Sensor Lens SShheennzzhheenn FFoossccaamm IInntteelllliiggeenntt TTeecchhnnoollooggyy CCoo..,, LLiimmiitteedd 89 TTeell:: 8866 775555 22667744 55666688 FFaaxx:: 8866 775555 22667744 55116688 wwwwww..ffoossccaamm..ccoomm Video Audio Network Horizontal view angle Image Compression Image Frame Rate Resolution Stream Image adjustment Flip image Infrared mode Night visibility Input/Output Audio Compression Ethernet Wireless Standard Data Rate Wireless Security Remote Access Network Protocol Operating System System Requirements Browser Other Features Power Physical Environment Motion Detection Privacy Block User Accounts Firewall Reset Power Supply Power Consumption Dimension(LxWxH) Net Weight Waterproof Operating Temperature Operating Humidity Storage Temperature Storage Humidity 70 H.264 30fps(60Hz), 25fps(50Hz), downward adjustable 1080P(1920x1080),720P(1280 x 720), VGA(640 x 480), QVGA(320 x 240) dual stream The hue, brightness, contrast, saturation, sharpness are adjustable flip and mirror Automatic or manual With 30pcs IR-LED, Night Vision Range up to 20m External RCA interface for two-way audio PCM/G.726 One 10/100Mbps RJ45 port IEEE802.11b/g/n IEEE802.11b: 11Mbps(Max.);
IEEE802.11g: 54Mbps(Max.);
IEEE802.11n: 150Mbps(Max.). WEP, WPA, WPA2 P2P DDNS IPTCPUDPHTTPHTTPSSMTPFTPDHCP DDNSUPnPRTSPONVIF Microsoft Windows 2000/XP, Vista, 7,8;
Mac OS Microsoft IE8 and above version or compatible browser;
Mozilla Firefox;
Google Chrome;
Apple Safari. Alarm via E-Mail, upload alarm snapshot to FTP Set privacy area manually Three levels user role Supports IP Filtering Reset button is available DC 12V/1.0A 5 Watts (Max.) 98(L)x65 (W)x62 (H) 255g IP66
-10C~ 60C (14F ~ 140F) 10% ~ 80% non-condensing
-20C ~ 60C (-4F ~ 140F) 0% ~ 90% non-condensing SShheennzzhheenn FFoossccaamm IInntteelllliiggeenntt TTeecchhnnoollooggyy CCoo..,, LLiimmiitteedd 90 TTeell:: 8866 775555 22667744 55666688 FFaaxx:: 8866 775555 22667744 55116688 wwwwww..ffoossccaamm..ccoomm CE, FCC, RoHS Limited 2-year warranty Certification Warranty Attention: Power adapter should be used between -20-40 , and 20%
-90% relative humidity. 6.4 CE & FCC Electromagnetic Compatibility (EMC) FCC Statement This device compiles with FCC Rules Part 15. Operation is subject to the following two conditions.
This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC Caution Any changes or modification not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. CE Mark Warning SShheennzzhheenn FFoossccaamm IInntteelllliiggeenntt TTeecchhnnoollooggyy CCoo..,, LLiimmiitteedd 91 TTeell:: 8866 775555 22667744 55666688 FFaaxx:: 8866 775555 22667744 55116688 6.5 WARRANTY wwwwww..ffoossccaamm..ccoomm ShenZhen FOSCAM Intelligent Technology Limited.("FOSCAM") values your business and always attempts to provide you the very best of service. No limited hardware warranty is provided by FOSCAM unless your FOSCAM product ("product") was purchased from an authorized distributor or authorized reseller. Distributors may sell products to resellers who then sell products to end users. No warranty service is provided unless the product is returned to an authorized return center in the region where the product was first shipped by FOSCAM or to the point-of-purchase, which may have regional specific warranty implications. If you purchase your FOSCAM product from online store, please contact the point-of-purchase and ask for return/replacement/repair service. Hardware Warranty Information FOSCAM provide 2-year limited warranty for naked product and 6-month limited warranty for accessories. Limited Hardware Warranty FOSCAM products are warranted to be free from manufacturing defects in materials and workmanship starting from the shipping date of FOSCAM. This limited hardware warranty does not cover:
Software, including the software added to the products through our factory-integration system, software that included in the CD,etc.
Usage that is not in accordance with product instructions.
Failure to follow the product instructions.
Abuse firmware upgrade without the authorized technicians guidance.
Normal wear and tear. Return Procedures
Please read FOSCAM warranty policy & policy of your reseller first before sending items back to point-of-purchase.
Customer must first contact point-of-purchase to obtain a Return Merchandise Authorization (RMA) number before returning the product. If the product you received is suspected to be defective and the product warranty has not expired, The RMA number will allow your reseller to track your return much easier and help them expedite processing your request.
After receiving your RMA case number, pack the item(s) very well with the original box and all the original accessories included such as power adapters, brackets, cables, manuals, and driver CD disks.
Write your RMA number and the return reason (the problem of the product) on the warranty card along with the complete package to send them back. Replacement Services If customers ask for replacement service, please contact point-of-purchase and follow their policy.
Our technicians will inspect all items returned for replacement requests. If the retuned product is found in working order, we will return the same item received. However customers shall be responsible for all shipping & handling charges incurred for getting the units back to customers. If returned products are found defective, we will replace the product and assume the shipping cost for sending back the replacement unit to customers.
SShheennzzhheenn FFoossccaamm IInntteelllliiggeenntt TTeecchhnnoollooggyy CCoo..,, LLiimmiitteedd 92 TTeell:: 8866 775555 22667744 55666688 FFaaxx:: 8866 775555 22667744 55116688 wwwwww..ffoossccaamm..ccoomm
If for any reason, we are unable to provide a replacement of the original returned item(s). You will have a choice for a Substitute item at the same equal value.
We do not provide exchange and replacement due to normal hardware upgrade according the market after 14 days after the product is delivered.
Our technicians will test the product before send out the replacement, any other demand for more than two times replacement for the same product during replacement limit will be rejected.
Replaced products are warranted from the balance of the former warranty period. Warranty Forfeiture
Warranty is void if purchase from unauthorized distributor or reseller.
Warranty is void if trade-mark, serial tags, product stickers have been removed, altered or tampered with.
Warranty is void for mishandling, improper use, or defacing the product.
Abuse firmware upgrade without the authorized technicians guidance.
Warranty is void for physical damage, altered, either internally or externally, improper or inadequate packaging when returned for RMA purposes.
Warranty is void if damage has resulted from accident, dismantle, abuse, or service or modification by someone other than the appointed vendor, souse, fission or the spare part has been over the period of warranty.
Warranty is void if product is damaged due to improper working environment or operation. (For example, improper temperature, humidity, unusual physical or electrical stress or interference, failure or fluctuation of electrical power, static electricity, using wrong power adapter, etc.)
Warranty is void if damaged by the use of parts not manufactured or sold by FOSCAM.
Damage caused by improper installation of third-party products.
Warranty is void if damaged for irresistible cause, such as earthquake, fire, lightning, flood, etc.
Product beyond limited warranty. Shipping Fee
If products are defective or damaged under normal use or operation in the replacement limit, distributors or resellers are responsible for the shipping cost the product back to customers, customers should assume the shipping cost send the product to the point-of-purchase.
During replacement limit, if customers ask for replacement due to the product does not fit for customers personal expectation, customers should responsible for both shipping fee.
Customers shall be responsible for both shipping fee if their product beyond the replacement limit but still in warranty limit. Repair Service Out Of Warranty
FOSCAM provide extra repair service for product that out of warranty, it is chargeable. The total fee contains device cost and service fee. Device cost (including accessories) is the standard uniform price provide by FOSCAM.
Different region may have different service fee, please contact the point-of-purchase to confirm that before you ask for this service.
Our technicians will quote the total price after detect the product, If customers refused to repair after the quotation, customers need pay for the test fee, $3.5/hour. If agree with the quotation, test will be free.
Repaired product out of warranty will obtains 3-month warranty from the date of the product back to customers. SShheennzzhheenn FFoossccaamm IInntteelllliiggeenntt TTeecchhnnoollooggyy CCoo..,, LLiimmiitteedd 93 TTeell:: 8866 775555 22667744 55666688 FFaaxx:: 8866 775555 22667744 55116688 Limitation of Liability
FOSCAM is not responsible for other extra warranty or commitment promised by resellers, if your reseller promised some extra commitment or warranty; please ask for written documents to protect your rights and interests. wwwwww..ffoossccaamm..ccoomm
FOSCAM does not offer refunds under any circumstances. Please contact the point-of-purchase and follow their refund/return policy.
FOSCAM shall not be liable under any circumstances for any consequential, incidental, special or exemplary damages arising out of or in any connection with this agreement or the products, including but not limited to lost profits, or any claim based on indemnity or contribution, or the failure of any limited or exclusive remedy to achieve its essential purpose or otherwise. Purchaser's exclusive remedy, as against FOSCAM, shall be the repair or replacement of defective parts. If FOSCAM lists a product on its website specification in error or that is no longer available for any reason, FOSCAM reserves the right to explain it without incurring any liability. All rights reserved. FOSCAM and the FOSCAM logo are trademarks of ShenZhen FOSCAM Intelligent Technology Limited., registered in the U.S. and other countries. 7 Obtaining Technical Support While we hope your experience with the IPCAM network camera is enjoyable and easy to use, you may experience some issues or have questions that this Users Guide has not answered. If you have problem with FOSCAM IP camera, please first contact FOSCAM reseller for solving the problems. If our reseller cannot provide service, please contact our service department: tech@foscam.com . SShheennzzhheenn FFoossccaamm IInntteelllliiggeenntt TTeecchhnnoollooggyy CCoo..,, LLiimmiitteedd 94 TTeell:: 8866 775555 22667744 55666688 FFaaxx:: 8866 775555 22667744 55116688
This product uses the FCC Data API but is not endorsed or certified by the FCC