submitted | available | document details (if available) | source link |
---|---|---|---|
Microsoft Word - 新建 Microsoft Office Word 文档 _3_ Administrator Acrobat Distiller 11.0 (Windows) |
various | User manual | Users Manual | 1.09 MiB |
Oa COMFAST Outdoor AP Quick Installation Guide Outdoor AP M0304413 Version 6.0 1. Please set automatically get ip for the computer , connect the ap lan port to the setting page. G5 POE Adapter LAN Computer 2. Set the computer to obtain the IP address automatically, and connect the LAN port of the device to the device manag ement interface. 3. The device is defaulted to the interface Router mode. The steps to enter the setup page as follows:
(Note: Please connect the wireless network management page to the single network port device)
(1) Under default configuration, power on the device and wait for the device to start for 90 seconds.
(2) Connect device wireless SSID (default is COMFAST_XXXX_2G/
COMFAST_XXXX_5G, XXXX is the last 4 digits of the MAC).
(3) Input 192.168.10.1 in the web browser to get into the setting page.
(4) Open the computer browser, and input 192.168.10.1 to get into the device login page (Default username: admin Default password:
admin).The device language is compatible with Chinese and English to choose, and you can set up the language by the top right corner icon Ceo 4.When getting into the setting page, there are four working modes in the Wizard: AP Mode,Bridge Mode,Router Mode, Repeater Mode. Internet Internet MODEM, ae eferle Router Bridge Internet Internet Q Om . exh *)) A =H wires WISP AP AP Repeater 5.Click AP mode and set up IP Address and Subnet Mask. The IP address and Subnet mask should be within the same network segment as upper network and can t be conflict with IP address from upper network router. After settings, you can visit the device from the IP address you have set just now by connecting internet with WAN port of the device or POE adaper LAN port.
@Notes: In AP mode, the IP address from the other devices connected the AP will be allocated by the upper network router.
@The AP needs to set an intranet IP address (do not set the same IP address as the upper router). If want to manage the device, Manually set the IP address of the same network segment of the intranet IP. Oo_o o Lan Settings WiFi 2.46 WiFi5.86 Finish Lan Settings. address [192168101 ~dsi
Subnet Mask [2552552550 6. AP Mode: You can set up 2.4G/5.8G wireless SSID, password, channel and country in advance. After setting up,the device s WAN port or POE adapter LAN port connected internet,other mobile devices can connect the SSID to surf the internet. O_o0_0 o Lan Settings WiFi 2.46 WiFi5.86 Finish 2.4G Wireless Password [
Advanced Setting Bandwidth (20MH=
Country [hina Channel [auto Boog vo 7. Bridge Mode: Pls ensure the WDS in upper network is enabled. AP device can set up intranet segment(do not set the same IP address as the upper router), and then select the wireless SSID signal you need to bridge(Distinguish between 5.8GHz and 2.4GHz) and input wireless password.
(Notes: The password is same as your upper network router) O: Q LonSettings Bridge Settings WiFi 24G wirisac Finish Lan Settings rasrss Subnet Mask [2552552550 Scan Results eS No. ss chanel Operation 1 AoASEraAEE34 unknown 1 per Fe a 2 oasesaci6a unkown cr 3 moaserssasan unknown a 4 eD04cs196D12AG.COMFAST.ATBEC2 2 7 #
5S aoaseretesa unknown > ee F 6 _4nasersKoE6 unkrcu > ar F 7 aoasessoa736 2250 909736 2 7 F set the SSID and password for the device and click Next h settings.
: O: : oO LanSettings GridgeSettings WiFi24G wiis.ac nia 2.46 Wireless ssio [Cows |
to 8. Repeater Mode: The AP device can set the internal network segment (the gateway IP should not be the same as the upper device gateway IP). Next, select the name of the wireless SSID signal that you need to relay (distinguish between 5.8GHz and 2.4GHz) and input wireless password.
(Notes: The password is same as your upper network router).
Lan Settings RepeaterSettings WiFi24G winis.86 Finish Lan Settings address [192168101 Subnet Mask [7552552550 Scan Results s no. sss ss Channa operation a AOASERSAEE4 unknown 1 ae 8 2 ADASIEFB4:DE64 unknown 1 ae Z I 3 AD:ASEF-BS:48:21 unknown 2 ar 4 ongoacen6o1 246.cOMFAST.ATSEC? 2 7 +
5 AOASEF-B4:E631 unknown 1 ar s 6 aoasersavest known 1 ae #
7 soasers09736 2250 909736 2 7 a Pls set the SSID and password for the device and click Next to finish settings.
: o LanSettings RepesterSettings wiri2as wiris.86 Finish 2.4G Wireless ssip [ commAsT 326.26 Password v~
9.Router Mode: There are three ways to surf the internet: PPPOE, Static, and DHCP. (Pls refer to router setting as reference) Internet Internet move ioe alee Router Bridge Internet Internet pp a 1) KR Ls SWHIEY WISP AP AP Repeater Quick Installation Guide Statement Shenzhen Four Seas Global Link Network Technology CO.,Ltd.Company all rights reserved. Without ours official writ permission, no unit or individual shall be copied, reproduced, transcribed or translated in part or whole book. In any form or by any means(electronic,mechanical,printing,record-
ing or other possible means)or for the propagation of goods any commercial, profitable purposes. COMFAST is the registered trademark of Shenzhen Four Seas Global Link Network Technology Co.,Ltd.Company. All other trademarks or registered trademarks mentioned in this document, by respective owners. Product specifications and information mentioned in this manual are for reference on subject to updates without notice. Unless there are other special agreed, this manual is used only as a user guide. All statements, information, etc. are not constitute any form of guarantee. Manufacturer: Shenzhen Four Seas Global Link Network Technology Co.,Ltd.Company Address: Room 607-610,Block B Tao JINDI Electronic Business Incubation Base, Tenglong Road, Longhua District, Shenzhen, China Hotline: 0755 83790059/83790659 Website: www.szcomfast.com Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. NOTE: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter RF Exposure Statement To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum distance of _ m the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter
This product uses the FCC Data API but is not endorsed or certified by the FCC