submitted | available | document details (if available) | source link |
---|---|---|---|
July 14 2017 | July 14 2017 | pc1 Microsoft® Office Word 2007 |
various | User Manual | Users Manual | 251.19 KiB | July 14 2017 |
Vivitar Bluetooth Headphones User Manual VU50 Important Safety Precautions When using your Bluetooth Headphones, basic safety precautions should always be followed, including the following:
1.READ ALL INSTRUCTIONS BEFORE USING YOUR HEADPHONES. 2. Do not use your headphones near water. Clean using a dry or slightly moist cloth. 3. Do not place your headphones on any wet surfaces. 4. Do not allow children or the inrm to play with your headphones without adult supervision. 5. Do not expose your headphones to excessive heat, ames or re. 6. Always press all buttons carefully. Do not manhandle your headphones. 7. Do not use in extremely dry environments, as this can lead to static discharge during usage. 8. Do not expose your headphones to temperatures above 40C. Keep out of direct sunlight. 9. Do not attempt to repair this product yourself. Contact a qualied service center if your headphones are in need of service. 10. Do not drop, puncture or expose your headphones to excessive trauma. 11. Your headphones are not intended for commercial use. 12. Do not place near objects that generate a strong magnetic eld. 13. Unplug this device when not in use for long periods of time or during lightning storms. BATTERY WARNING:
-The device is equipped with an integrated lithium ion battery. The battery cannot be replaced. Do not attempt to remove the battery CAUTIONfrom the device.
-Do not dispose of in re or expose to excessive heat.
-Do not crush, puncture, incinerate, or short circuit external contacts.
-Please recycle or dispose of the battery properly. Contact your local recycling facilities and/or the manufacturer for further information. Introduction Thank you for purchasing your Bluetooth Headphones, item VF50012BT. You can use your headphones with iPads, iPhones, iPods and many other types of smartphones and Bluetooth devices to stream music and enjoy hands-free calling. In addition, once powered on, your headphones light up in an exciting array of colors and patterns. In order to get the best results when using your headphones, please read this manual prior to using. Package Content
-VF50012BT Bluetooth Headphones
-Micro USB Charging Cable
-Users Manual with Warranty Information A Quick Look at Your Device Charging Your Headphones Your headphones have a built-in, rechargeable lithium ion battery. To avoid damage, do not attempt to remove the battery. The full performance of the battery is only achieved after a few charging-discharging cycles. Charge the battery fully before rst use. To do so, follow the steps below:
1. Connect one end of the included USB charging cable to the charging port on your headphones. Then plug the other end of the USB charging cable into a USB port on your computer or a suitable power adapter in order to recharge the internal rechargeable battery. NOTE: The internal battery of your headphones takes approximately two hours to charge when completely drained. 2. When the battery is charging, the LED indicator light will turn red. The LED indicator light will turn off when the battery is fully charged. Unplug when charging is complete. NOTE: Overcharging could reduce the life of the battery. A charged battery will lose its capacity if it is not used on a regular basis. Important!
To avoid a complete discharge of the battery, charge your headphones at least once every six months. Pairing Your Headphones with a Bluetooth Device Your headphones can be paired with most Bluetooth devices including iPads, iPhones, iPod Touches, and most smartphones, laptops and tablets. In order to pair your headphones with a phone, follow the steps below:
1. Press and hold the ON/OFF button in order to power on your headphones. The LED indicator light will start alternately ashing red and then blue repeatedly. This indicates that your headphones are in pairing mode. 2. Go to the Bluetooth Manager of your Bluetooth device. 3. Search Bluetooth devices and select your headphones (most frequently listed as Fabric headphone) to start connecting. 4. Enter 0000 if your device asks for the PIN code. 5. Once paired, the LED indicator light will stop blinking and steadily shine blue. Note that anytime music is playing, the light will slowly blink blue every few seconds. Using Your Headphones Powering Your Headphones On and OFF 1.Press and hold the ON/OFF button in order to power on your headphones.If you have alreadypaired your headphones to your Bluetooth device, they will automatically remain paired eachtime you power on your headphones. 2. Press and hold the ON/OFF button in order to power off your headphones. Listening to Music Play/Pause Button: Press to play or pause a track. Press and hold the NEXT TRACK/VOLUME + button to advance to the next song in a playlist. Press and hold the PREVIOUS TRACK/VOLUME - button to go back to the last song in a playlist. Quickly tap the NEXT TRACK/VOLUME + button to increase the volume. Quickly tap the PREVIOUS TRACK/VOLUME - button to decrease the volume. Note: You can also adjust volume and playback settings on your phone or connected audiodevice. Using the Phone Function Last Number Re-dial: Press the ANSWER CALL button twice to re-dial the last number called. Answering a Call: Quickly press the ANSWER CALL button to answer an incoming call. Reject an Incoming Call: Press and hold the ANSWER CALL button for a few seconds to rejectan incoming call. Ending a Call: Quickly press the ANSWER CALL button to end a call. Auxiliary Input Mode To use your headphones with devices that are not Bluetooth enabled, plug one end of a standard3.5mm audio cable into the Auxiliary Port on your headphones. Plug the other end into theheadphone jack on your audio device. If the ON/OFF Switch is in the ON position while playing music from a device connected to the Auxiliary Port your headphones will light up in an excitingarray of colors and patterns. Maintenance and Care
-Before using your headphones, examine the ear cups to make sure that they are clean. Similarly, inspect the ports and jacks of your headphones to make sure that they are clear of dust and debris before charging or inserting an AUX cable.
-Use a soft, moist cloth to clean the cushions of your ear cups. Do not allow moisture to get inside the ear cups. If necessary, use a small amount of dish soap diluted with water to clean more stubborn stains.Never use any harsh chemicals or detergents. Make sure your headphones are dry before using.
-When your headphones are not in use, they should be stored in a cool, dry place.
-Never tug or yank on the USB cable or AUX cable while they are connected to your headphones. Connect and disconnect these cables as carefully as possible.
-Never expose your headphones to high temperatures, extreme cold, high humidity or excessive moisture or water.
-Please recycle or dispose of your headphones properly based on the laws and rules of your municipality. Contact local recycling facilities and/or the manufacturer of your headphones for further information. FCC Statement Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. Vivitar One Year Warranty This warranty covers the original consumer purchaser only and is not transferable. This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year. What Is Not Covered by Warranty Damages or malfunctions not resulting from defects in material or workmanship and damages or malfunctions from other than normal use, including but limited to, repair by unauthorized parties, tampering, modication or accident. To Obtain Warranty Service and Troubleshooting Information:
Call 1-800-592-9541 in the U.S. or 0-800-917-4831 in the UKor visit our website at www.vivitar.com. To receive Warranty service along with the name and address of an authorized product service center, the original consumer purchaser must contact us for problem determination and service procedures. Proof of purchase in the form of a bill of sale or receipted invoice, evidencing that the product is within the applicable Warranty period(s), MUST be presented in order to obtain the requested service. It is your responsibility to properly package and send any defective products along with a dated copy of proof of purchase, a written explanation of the problem, and a valid return address to the authorized service center at your expense. Do not include any other items or accessories with the defective product. Any products received by the authorized service center that are not covered by warranty will be returned unrepaired. Vivitar One Year Warranty (continued) NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE EXPRESSLY DESCRIBED ABOVE SHALL APPLY. DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERIOD STATED ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON DISTRIBUTOR. REPAIR, REPLACEMENT, OR REFUND OF THE ORIGINAL PURCHASE PRICE - AT DISTRIBUTORS SOLE DISCRETION
-ARE THE EXCLUSIVE REMEDIES OF THE CONSUMER. IN NO EVENT WILL DISTRIBUTOR, ITS MANUFACTURERS, OR SAKAR INT. BE LIABLE FOR ANY INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES (SUCH AS, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR RECORDS) CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE PRODUCT. EXCEPT AS STATED HEREIN, NO OTHER WARRANTIES SHALL APPLY. NOTWITHSTANDING THE FOREGOING, CONSUMERS RECOV-
ERY AGAINST DISTRIBUTOR SHALL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT SOLD BY DISTRIBUTOR. THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL CONSUMER WHO PURCHASED THE PRODUCT AND IS NOT TRANSFERABLE. Some countries, states or provinces do not allow the exclusion or limitation of incidental or consequential damages or allow limitations on warranties, so limitation or exclusions may not apply to you. This warranty gives you specic legal rights, and you may have other rights that vary from state to state or province to province. Contact your authorized retailer to determine if another warranty applies. This product is manufactured, distributed and sold by SAKAR International, Inc. All other trademarks are the property of the respective owner, who has not sponsored, endorsed or approved this product.
This product uses the FCC Data API but is not endorsed or certified by the FCC