D1201 Wireless AC1200 ADSL2+ Dual Band Modem Router User Manual

Company: SHENZHEN TENDA TECHNOLOGY CO., LTD.

FCC ID: V7TD1201

submitted	available	document details (if available)	source link
		Microsoft Word - D1201V1.0-TDE01?明?-?子?.doc SoniaHsu Acrobat Distiller 8.1.0 (Windows)

exhibit
download
text

various

User Manual

Users Manual

pdf

5.40 MiB

Wireless AC1200 ADSL2+ Dual Band Modem Router i Wireless AC1200 ADSL2+ Dual Band Modem Router Copyright Statement is the registered trademark of Shenzhen Tenda Technology Co., Ltd. All the products and product names mentioned herein are the trademarks or registered trademarks of their respective holders. Copyright of the whole product as integration, including its accessories and software, belongs to Shenzhen Tenda Technology Co., Ltd. No part of this publication can be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the prior written permission of Shenzhen Tenda Technology Co., Ltd. If you would like to know more about our product information, please visit our website at http://www.tendacn.com. Disclaimer Pictures, images and product specifications herein are for references only. To improve internal design, operational function, and/or reliability, Tenda reserves the right to make changes to the products without obligation to notify any person or organization of such revisions or changes. Tenda does not assume any liability that may occur due to the use or application of the product described herein. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information and recommendations in this document do not constitute the warranty of any kind, express or implied. Technical Support Website: http://www.tendacn.com Telephone: (86 755) 2765 7180 E-mail: support@tenda.com.cn ii Wireless AC1200 ADSL2+ Dual Band Modem Router Contents Chapter 1 Get to Know Your Router ..................................................................................................................................... 1 1. What it does .............................................................................................................................................................. 1 2. Product Features ........................................................................................................................................................ 1 3. Package Contents ...................................................................................................................................................... 2 Chapter 2 Hardware Install ................................................................................................................................................... 3 1. LED Indicators, Buttons and Interfaces .................................................................................................................... 3 2. Install the device ....................................................................................................................................................... 5 Chapter 3 Quick Internet Setup ............................................................................................................................................. 7 1. Log in to Web Manager ............................................................................................................................................. 7 2. Internet Setup ............................................................................................................................................................ 9 2.1 ADSL Mode .................................................................................................................................................... 9 2.2 Ethernet Mode ............................................................................................................................................... 10 2.3 Test Internet Connectivity ............................................................................................................................. 12 Chapter 4 Advanced Settings .............................................................................................................................................. 13 1. Device Info .............................................................................................................................................................. 13 1.1 Summary ....................................................................................................................................................... 13 1.2 WAN .............................................................................................................................................................. 14 1.3 Statistics ........................................................................................................................................................ 14 1.4 Route ............................................................................................................................................................. 16 1.5 ARP ............................................................................................................................................................... 16 1.6 DHCP ............................................................................................................................................................ 16 2. Advanced Setup....................................................................................................................................................... 17 2.1 Layer2 Interface ............................................................................................................................................ 17 2.2 WAN Service ................................................................................................................................................. 19 2.3 LAN .............................................................................................................................................................. 89 2.4 NAT ............................................................................................................................................................... 92 2.5 Security ......................................................................................................................................................... 99 2.6 Parental Control .......................................................................................................................................... 102 2.7 Bandwidth Control ...................................................................................................................................... 104 2.8 Routing ........................................................................................................................................................ 105 2.9 DNS ............................................................................................................................................................. 108 2.10 DSL ........................................................................................................................................................... 112 2.11 UPnP ......................................................................................................................................................... 114 2.12 Print Server ............................................................................................................................................... 115 2.13 Storage Service .......................................................................................................................................... 121 2.14 Interface Grouping .................................................................................................................................... 124 2.15 IP Tunnel ................................................................................................................................................... 127 2.16 Certificate .................................................................................................................................................. 129 2.17 Multicast.................................................................................................................................................... 133 2.18 IPTV .......................................................................................................................................................... 134 3. Wireless ................................................................................................................................................................. 135 3.1 2.4G ............................................................................................................................................................. 135 3.2 5G ................................................................................................................................................................ 141 4. Diagnostics ............................................................................................................................................................ 148 4.1 Diagnostics .................................................................................................................................................. 148 4.2 Ping test ....................................................................................................................................................... 148 iii Wireless AC1200 ADSL2+ Dual Band Modem Router 5. Management .......................................................................................................................................................... 149 5.1 Settings ........................................................................................................................................................ 149 5.2 System Log ................................................................................................................................................. 151 5.3 SNMP Agent ............................................................................................................................................... 152 5.4 Internet Time ............................................................................................................................................... 153 5.5 Access Control ............................................................................................................................................ 154 5.6 Update Firmware ......................................................................................................................................... 155 5.7 Reboot ......................................................................................................................................................... 156 Appendix 1 Configure Your PC ........................................................................................................................................ 157 Windows 8 ................................................................................................................................................................ 157 Windows 7 ................................................................................................................................................................ 159 Windows XP ............................................................................................................................................................. 161 MAC ......................................................................................................................................................................... 162 Appendix 2 WiFi Connection ........................................................................................................................................... 164 Windows 8 ................................................................................................................................................................ 164 Windows 7 ................................................................................................................................................................ 165 Windows XP ............................................................................................................................................................. 166 MAC ......................................................................................................................................................................... 167 iPhone/iPad ............................................................................................................................................................... 169 Appendix 3 FAQs .............................................................................................................................................................. 171 Appendix 4 VPI/VCI List ................................................................................................................................................. 173 Appendix 5 Regulatory Compliance Information ............................................................................................................. 181 iv Wireless AC1200 ADSL2+ Dual Band Modem Router Chapter 1 Get to Know Your Router 1. What it does The Wireless AC1200 ADSL2+ Dual Band Modem Router provides you with an easy and secure way to set up a wireless home network with fast access to the Internet over a high-speed digital subscriber line (DSL). Complete with a built-in ADSL modem, it is compatible with all major ADSL Internet service providers. It offers wireless speed of up to 1200Mbps (2.4G: 300Mbps; 5G: 900Mbps) needed for demanding applications, such as large file transfers, streaming HD video, and multiplayer gaming. The unit comes with a wide range of premium features and applications such as IPv6, SNMP, Multicast, IP tunnel, ready share USB, IPTV service and parental controls, etc. Plus, with the router, you can access the Internet via the ATM interface or Ethernet interface. 2. Product Features Wireless AC speeds up to 1200 Mbps for streaming HD videos and online gaming in addition to basic Internet applications All-in-one device combines a Built-in ADSL2+ modem, wired router, wireless router and switch Sharable USB lets you access and share files on an attached USB hard drive Sharable Printer lets you print from your Windows computer to a connected USB printer Advanced QoS helps prioritize media streaming and gaming applications for best entertainment experience Parental Control keeps your kids Internet experience safe using flexible and customizable filter settings One-touch WPS ensures a quick and secure network connection WEP and WPA/WPA2 are supported for advanced encryptions Compatibility: Works with all major ADSL Internet service providers (ISPs); backward compatible with 802.11b/g WiFi devices Interchangeable LAN/WAN ports to schedule the Ethernet port to function either as a LAN or a WAN port Interchangeable LAN/IPTV to schedule the Ethernet port to function either as a LAN or an IPTV port Optional Ethernet and ADSL Uplinks: Access the Internet via ADSL2+ Broadband Internet Service or an interchangeable LAN/WAN RJ45 port Multiple Internet Connection Types: Bridging, PPPoE, IPoE, PPPoA, IPoA, dynamic IP and static IP IPTV Service lets your surf the Internet while watching online TV 6000V lightningproof design fits into lightning-intensive environment 1 Wireless AC1200 ADSL2+ Dual Band Modem Router Strong driving capability up to 6.5Km transmission distance High speed ADSL speed up to 24Mbps downstream 1Mbps upstream Built-in firewall prevents hacker attacks Channel auto-select for optimum performance FDM technology enables telephoning, faxing and surfing activities to proceed simultaneously without mutual interference Other Advanced Features: IPv6, DDNS, virtual server, DMZ, port triggering, IP filter, MAC filter and UPnP, etc. Tenda Setup Wizard for easy and fast installation and configuration Tenda Green: Use hardware Power On/Off and software WiFi On/Off buttons to turn on and off power and WiFi to save energy when not in use 3. Package Contents Your box should contain the following items:

Wireless AC1200 ADSL2+ Dual Band Modem Router

Phone Cable

Ethernet Cable

ADSL Splitter

Install Guide

Power Adapter If any of the parts are incorrect, missing, or damaged, keep the carton, including the original packing materials and contact the dealer for immediate replacement. 2 Wireless AC1200 ADSL2+ Dual Band Modem Router Chapter 2 Hardware Install You can also set up your new router instead of using the Install Guide that comes in the box. This chapter walks you through the hardware install. 1. LED Indicators, Buttons and Interfaces Front Panel LED PWR SYS Description Power is supplied to the device. Power is not supplied to the device. Status Solid Off Blinking System is functioning correctly. Solid/Off System is functioning incorrectly. Blinking Transmitting data wirelessly WLAN Off Solid Wireless is disabled. Wireless is enabled. Slow Blinking Physical connection failure. DSL Fast Blinking Synchronizing... Solid Off ADSL connection is established. No connection established LAN 1/2/3/4 Blinking Transmitting data Solid Connection is established. 3 Wireless AC1200 ADSL2+ Dual Band Modem Router Solid Client connected successfully. WPS Blinking WPS LED starts blinking if you press the WPS button on the device or interface. USB Off Solid Off Solid No wireless clients are connected. WPS LED turns off after blinking for 2 minutes. Connection is successfully established on the USB port. Connection is not established on the USB port. Current client is connecting to the Internet; no data is transmitted via the Internet. INTERNET Blinking Current client is connecting to the Internet; data is transmitted via the Internet. Off Current Internet client is not connecting to the Internet. Back Panel Button & Interface Description DSL For connecting the router to the Internet via a phone cable provided by your ISP. LAN port or WAN port. When you access the Internet via the DSL, this port works as a LAN port which can be used to connect to a PC, a switch, or a router; when you access the Internet 1/WAN via an Ethernet cable from your ISP directly, this port works as a WAN port, but this port works as a LAN port by default, you need to go to the Management webpage to select Ethernet type (namely, stimulate this port to function as a WAN port). 2/3 4/iTV LAN port, used to cable the device to the local network devices such as computers. LAN port or IPTV port. When IPTV feature is disabled, it works as a LAN port which can be used to connect to a PC, switch or a router; when IPTV feature is enabled, it works as an IPTV port, and it can only be connected to a Set-Top Box. Note: IPTV feature is disabled by default. USB Used to connect a USB device, such as a 3G USB modem, USB print server or storage service. 4 Wireless AC1200 ADSL2+ Dual Band Modem Router RST/WPS Press it for 1-3 seconds to enable WPS-PBC feature;

Press it for 8 seconds to restore all configurations to factory defaults. DC Used to connect to the power adapter, which is included in the package. ON/OFF Power switch to turn the router on or off. 2. Install the device

Connect the included power adapter to your router and turn on the router.

Connect your computer to your router. (You can also wirelessly connect the router to one wireless device by connecting to its SSIDwireless network name, and then enter the default username and password admin/admin, for entering the management web to configure the router. SSID and default username/password, see the bottom label of the router.)

Connect your router to the Internet. Choose ADSL Mode or Ethernet Mode according to your actual Internet service type. 5 Wireless AC1200 ADSL2+ Dual Band Modem Router Simply connect the DSL line to the DSL port of your router. With a telephone ADSL Mode If your ISP provides you a DSL line Without a telephone Use the splitter as a medium:

1) Connect the DSL line from the Internet side to the LINE port of the splitter;

2) Connect the telephone with a phone cable to the PHONE port of the splitter;

3) Connect the MODEM port of the splitter and DSL port of your router via another phone cable. Ethernet If your ISP provides Mode you an Ethernet cable Do not go to (connect the Ethernet cable to the 1/WAN port) until you finish the Primary Setup of Internet connection type on the Web Management Homepage, i.e., finish settings in Ethernet Mode in Chapter 3 Quick Internet Setup >3.2 Internet Setup. 6 Wireless AC1200 ADSL2+ Dual Band Modem Router Chapter 3 Quick Internet Setup This chapter instructs you to quickly set up your Internet connection. 1. Log in to Web Manager Preparation for logging in to web manager:

Method 1: Using Resource CD

Insert the included resource CD into your computers driver and the CD automatically runs. If it does not, double click

, and you will see the screen below.

Click Run and it will automatically configure your PCs TCP/IP properties. If your PC is successfully configured, the login window will display.

Method 2: Using a Web Browser

Set your PC to Obtain an IP address automatically. For more information, see Appendix 1 Configure Your PC.

Launch a web browser and enter 192.168.1.1 in the address bar. 7 Wireless AC1200 ADSL2+ Dual Band Modem Router Login:

Enter admin in both the Login Username and Password fields if you access the router for the first time and then click Login to enter the home page. Tip If you change the login username and password and forget them, press the RST/WPS button on the device for at least 8 seconds to reset the router, and then enter the home page with the default name and password admin to reconfigure all settings you need. 8 Wireless AC1200 ADSL2+ Dual Band Modem Router 2. Internet Setup 2.1 ADSL Mode

Connection Mode: Select ADSL mode.

Country: Select your country.

ISP: Select your ISP.

VPI/VCI: This two fields will be populated automatically if you select a correct country and ISP.

Connection Type: Select your Connection Type, and fill the relevant Internet information. If you are not clear about this info, contact and consult your ISP. Connection Type ISP Information PPPoE/ PPPoA Enter the ISP user name and password. If you are not clear about this information, ask your ISP to provide it. IPoE Dynamic IP No entries are needed. Static IP Enter the assigned IP address, subnet mask, and the IP address of your ISPs primary 9 Wireless AC1200 ADSL2+ Dual Band Modem Router DNS server. This information should have been provided to you by your ISP. If a secondary DNS server address is available, enter it also. Enter the assigned IP address, subnet mask, and the IP address of your ISPs primary IPoA Static IP DNS server. This information should have been provided to you by your ISP. If a secondary DNS server address is available, enter it also. Bridge When Bridge mode is enabled, the router works as a modem. If you wish to initiate a dialup directly from your PC for Internet access or enjoy the entire Internet connection by yourself (instead of sharing it with others), you can select Bridge. Note If your country and/or your ISP are not covered on the home page, select Other and configure the VPI and VCI value manually. If you do not know this information, ask your ISP to provide it. Also you can refer to Appendix 4 VPI/VCI List. 2.2 Ethernet Mode

Connection Mode: Select ETH mode.

Connection Type: Select your Connection Type, and fill the relevant Internet information. If you are not clear about this info, contact and consult your ISP. 10 Wireless AC1200 ADSL2+ Dual Band Modem Router Connection Type ISP Information Dynamic IP No entries are needed. IPoE Static IP Enter the Internet info (IP address, subnet mask, gateway and DNS server address) provided by your ISP. PPPoE Bridge Enter the username and password provided by your ISP. When Bridge mode is enabled, the router works as a modem. If you wish to initiate a dialup directly from your PC for Internet access or enjoy the entire Internet connection by yourself (instead of sharing it with others), you can select Bridge. Note After saving the Ethernet mode settings, you will see a note prompt to tell you the connection status Disconnected and asks you to insert the Ethernet cable to 1/WAN port. And then you need to connect the Ethernet cable from the Internet side provided by your ISP to the 1/WAN port, i.e. to finish there in Ethernet Mode in Chapter 2 Hardware Install-> 2.2 Install the Device. For your network security, please finish this part of settings. (Recommended) Quick Wireless Setup:

Set wireless SSID

Set the wireless password.

Click OK to apply all the configurations on this page (including Primary Setup) 11 Wireless AC1200 ADSL2+ Dual Band Modem Router 2.3 Test Internet Connectivity If Connection Status shows Connected shown as below, you access the Internet now. Try to launch a web browser and enter www.tendacn.com. If the webpage displays properly, you are successfully connected to the Internet. 12 Wireless AC1200 ADSL2+ Dual Band Modem Router Chapter 4 Advanced Settings If you prefer configuring your modem router for unique situations, consult this chapter to know advanced features. Click on the home page to enter the screen below. 1. Device Info 1.1 Summary Here you can view system information and current status of your WAN connection as seen in the screenshot. 13 Wireless AC1200 ADSL2+ Dual Band Modem Router 1.2 WAN Here you can view the WAN Information including Interface, Description, Type, IGMP, NAT, Firewall, Status, IPv4 Address as seen in the screenshot. 1.3 Statistics Here you can view the packets received and transmitted on LAN and WAN ports. Statistics--LAN: Displays the packets received and transmitted on the LAN ports as seen in the screenshot below. 14 Wireless AC1200 ADSL2+ Dual Band Modem Router Statistics--WAN: Displays the packets received and transmitted on the WAN (eth0.1) port as seen in the screenshot below. Statistics-xDSL: Displays the packets received and transmitted on the DSL port. 15 Wireless AC1200 ADSL2+ Dual Band Modem Router 1.4 Route Here you can view the route table as seen in the screenshot:

1.5 ARP Here you can view the IP and MAC addresses of the PCs that attach to the device either via a wired or wireless connection as seen in the screenshot. 1.6 DHCP Here you can view the DHCP leases, including IP and MAC addresses of the PCs, hostnames and remaining lease time as seen in the screenshot:

16 Wireless AC1200 ADSL2+ Dual Band Modem Router 2. Advanced Setup 2.1 Layer2 Interface Click Advanced Setup > Layer2 Interface to enter the Layer2 Interface screen. This modem router provides two Layer2 Interfaces:

- ATM Interface for ADSL broadband Internet service. (By default, system applies the ATM Interface (ADSL uplink).)

- ETH Interface for connecting to the Internet via an Ethernet cable.

If you directly connect to the ADSL line via a phone cable, first refer to 2.1.1 To set up the ATM interface and then skip to 2.2.1 For ATM Interface

If you connect to the Internet via a fiber/cable modem using an Ethernet cable, first refer to 2.1.2 To set up the ETH interface and then skip to 2.2.2 For ETH Interface. 2.1.1 To set up the ATM interface

Select ATM Interface and click Add to configure it.

Enter the VPI and VCI values. Select a DSL Link Type (Internet connection type): EoA, PPPoA or IPoA. Leave other options unchanged from factory defaults. Click Apply/Save. 17 Wireless AC1200 ADSL2+ Dual Band Modem Router

Go to 2.2.1 For ATM Interface to configure the WAN service for Internet access. Tip If you are unsure about the VPI/VCI parameters, see Appendix 4 VPI/VCI List, or ask your ISP to provide it. 18 Wireless AC1200 ADSL2+ Dual Band Modem Router 2.1.2 To set up the ETH interface

Select ETH Interface and click Add.

Select eth0/eth0 in the box to function as a WAN port. Only one LAN port can be configured as the WAN port at a time. Click Apply/Save to take the settings into effect.

Go to 2.2.2 For ETH Interface to configure the WAN service for Internet access. 2.2 WAN Service This modem router provides two WAN services:

- WAN Service for ATM Interface (ADSL uplink)

- WAN Service for ETH Interface (Ethernet uplink) 19 Wireless AC1200 ADSL2+ Dual Band Modem Router 2.2.1 For ATM Interface Following 11 modes are for you to choose according to your actual Internet service. PPPoE IPoE 1) 4) IPv4 Only IPv4 Only 2) 5) IPv4&IPv6(Dual Stack) IPv4&IPv6(Dual Stack) 3) 6) IPv6 Only IPv6 Only 7) Bridging PPPoA 8) IPv4 Only 9) IPv4&IPv6(Dual Stack) 10) IPv6 Only 11) IPoA EoA PPPoA IPoA 1) PPPoE IPv4 Only Users If you configure the ATM Interface (ADSL uplink) and select EoA as the DSL link type, then you can start to set up WAN service for accessing the Internet.

Click Advanced Setup > WAN Service and then click the Add button.

Select the ATM interface you added just now from the pull-down menu in the figure below. Click Next.

Select PPP over Ethernet (PPPoE). Edit the Enter Service Description field which is optional. Suggest you keep the default. Select a network protocol: IPv4 Only. Click Next. 20 Wireless AC1200 ADSL2+ Dual Band Modem Router

Finish PPP Username and Password and other settings on the figure below. Click Next. PPP Username/ Password: Enter your PPP username and password. If you cannot locate this information, ask your ISP to provide it. PPPoE Service Name: Provided by your ISP. Only enter it if instructed by your ISP. Authentication Method: Used by ISP to authenticate the client that attempts to connect. If you are not sure, consult 21 Wireless AC1200 ADSL2+ Dual Band Modem Router your ISP or select AUTO. MAC Clone: When you cannot access the Internet after finishing other settings here except this option, consider whether its the matter of the MAC address of your computer. Clicking Clone MAC button copies the MAC address of your computer to the modem router. MTU: Keep the default value unless you are sure it is necessary for your ISP connection. Dial on demand: Connect to ISP only when there is traffic transmission. This saves your broadband Internet service bill. PPP IP extension: If enabled, all the IP addresses in outgoing packets including management packets on the WAN port will be changed to the device's WAN IP address. Only change the default settings if necessary. Enable PPP Debug Mode: Only enable this feature if supported by your ISP. Bridge PPPoE Frames Between WAN and Local Ports: If enabled, PPPoE dialup frame from LAN side will directly egress the WAN port without modification. Multicast Proxy: If enabled, the modem router will use multicast proxy. Knowledge Expansion 1. MAC Clone: Many broadband ISPs restrict access by allowing traffic only from the MAC address of your broadband modem, but some ISPs additionally register the MAC address of your computer when your account is first opened. If so, only by cloning the MAC address of your computer can you access the Internet through the modem router. 2. MTU: Short for Maximum Transmission Unit, the largest physical packet size, measured in bytes, which a network can transmit. Any messages larger than the MTU are divided into smaller packets before being sent. The default MTU is 1492 bytes. For some ISPs, you might need to change the MTU. This is rarely required, and should not be done unless you are sure it is necessary for your ISP connection.

To configure the Default Gateway interface, select the interface that you want to configure with the WAN gateway address in Available Routed WAN Interfaces box and move it into Selected Default Gateway Interfaces box. The default setting is recommended. Then click Next. 22 Wireless AC1200 ADSL2+ Dual Band Modem Router

To configure the WAN DNS address, click the Select DNS Server Interface from available WAN interfaces option, or select the Use the following Static DNS IP address option and enter the static DNS server IP addresses provided by your ISP. At last, click Next. Click Apply/Save to save your settings if everything is correctly set.

23 Wireless AC1200 ADSL2+ Dual Band Modem Router Here you can view your configurations. When the PPPoE connection is successful, you can access the Internet.

Steps 1~6 above for PPPoE and IPv4 Only users ---------------------------------------------------------------------------------------------------------------------------

2) PPPoE IPv4&IPv6 (Dual Stack) Users If you configure the ATM Interface (ADSL uplink) and select EoA as the DSL link type, then you can start to set up WAN service for accessing the Internet.

Click Advanced Setup > WAN Service and then click the Add button.

Select the ATM interface you added just now from the pull-down menu in the figure below. Click Next. 24 Wireless AC1200 ADSL2+ Dual Band Modem Router

Select PPP over Ethernet (PPPoE). Edit the Enter Service Description field which is optional. Suggest you keep the default. Select a network protocol you need: IPv4&IPv6 (Dual Stack). Click Next.

Configure PPP Username and Password and other settings on the figure below. Each field with its indication is mentioned above in PPPoE and IPv4 users- section. If ISP provides you no static IPv4 or IPv6 address, you just keep the default settings DHCP mode. Check Launch Dhcp6c for Prefix Delegation (IAPD). If your ISP is using stateful DHCPv6, check Launch Dhcp6c for Address Assignment (IANA) also. Click Next. 25 Wireless AC1200 ADSL2+ Dual Band Modem Router If ISP provides you with the static IPv4 and IPv6 address, configure the static IP addresses by checking Use Static IPv4 Address and Use Static IPv6 Address and enter the static IPv4 and IPv6 address. 26 Wireless AC1200 ADSL2+ Dual Band Modem Router

To configure the Default Gateway interface, select the interface that you want to configure with the WAN gateway address. Then click Next.

To configure the WAN DNS address, finish both the IPv4 setting and IPv6 setting. Click Next. 27 Wireless AC1200 ADSL2+ Dual Band Modem Router Click Apply/Save to save your settings if everything is correctly set.

Here you can view your configurations. When the PPPoE connection is successful, you can access the Internet.

28 Wireless AC1200 ADSL2+ Dual Band Modem Router

Steps 1~6 above for PPPoE and IPv4&IPv6 (Dual Stack) users ------------------------------------------------------------------------------------------------

3) PPPoE IPv6 Only Users If you configure the ATM Interface (ADSL uplink) and select EoA as the DSL link type, then you can start to set up WAN service for accessing the Internet.

Click Advanced Setup > WAN Service and then click the Add button.

Select the ATM interface you added just now from the pull-down menu in the figure below. Click Next.

Select PPP over Ethernet (PPPoE). Edit the Enter Service Description field which is optional. Suggest you keep the default. Select a network protocol you need: IPv6 Only. Click Next. 29 Wireless AC1200 ADSL2+ Dual Band Modem Router

Configure PPP Username and Password and other settings on the figure below. Each field with its indication is mentioned above in PPPoE and IPv4 users section. If ISP provides you no static IPv6 address, you just keep the default settings DHCP mode. Check Launch Dhcp6c for Prefix Delegation (IAPD). If your ISP is using stateful DHCPv6, check Launch Dhcp6c for Address Assignment (IANA) also. Click Next. 30 Wireless AC1200 ADSL2+ Dual Band Modem Router If ISP provides you with the static IPv6 address, configure a static IP address by checking Use Static IPv6 Address and enter the static IPv6 address. 31 Wireless AC1200 ADSL2+ Dual Band Modem Router

To configure the Default Gateway interface when using IPv6, select the interface that you want to configure with the WAN gateway address in Selected WAN Interface box. Then click Next.

To configure the WAN DNS address, check the Obtain IPv6 DNS info from a WAN interface option, or select the Use the following Static IPv6 DNS address option to enter the static DNS server IPv6 addresses provided by your ISP. At last, click Next. 32 Wireless AC1200 ADSL2+ Dual Band Modem Router

Click Apply/Save to save your settings if everything is correctly set. Here you can view your configurations. When the PPPoE connection is successful, you can access the Internet.

Steps 1~6 above for PPPoE and IPv6 Only users ---------------------------------------------------------------------------------------------------------------------------

4) IPoE IPv4 Only Users If your ISP uses DHCP to assign your IP address or if your ISP assigns you a static (fixed) IP address, IP subnet mask and the gateway IP address, you need to select the IP over Ethernet (IPoE). After you configure the ATM Interface (ADSL uplink) and select EoA as the DSL link type, you can start to set up WAN service for accessing the Internet.

Click Advanced Setup > WAN Service and then click the Add button. 33 Wireless AC1200 ADSL2+ Dual Band Modem Router

Select the ATM interface you added just now from the pull-down menu in the figure below. Click Next.

Select IP over Ethernet. Edit the Enter Service Description which is optional. Suggest you keep the default. Select a network protocol: IPv4 Only. Click Next.

Finish WAN IP Settings on the figure below. Click Next. 34 Wireless AC1200 ADSL2+ Dual Band Modem Router

Finish Network Address Translation Settings. Suggest keeping the default settings. Click Next.

Click Apply/Save to save your settings if everything is correctly set. 36 Wireless AC1200 ADSL2+ Dual Band Modem Router Here you can view your configurations. When the IPoE connection is successful, you can access the Internet.

Steps 1~7 above for IPoE and IPv4 Only users -------------------------------------------------------------------------------------------------------------------------------

5) IPoE IPv4&IPv6 (Dual Stack) Users If your ISP uses DHCP to assign your IP address or if your ISP assigns you a static (fixed) IP address, IP subnet mask and the gateway IP address, you need to select the IP over Ethernet (IPoE). After you configure the ATM Interface (ADSL uplink) and select EoA as the DSL link type, you can start to set up WAN service for accessing the Internet.

Click Advanced Setup > WAN Service and then click the Add button.

Select the ATM interface you added just now from the pull-down menu in the figure below. Click Next. 37 Wireless AC1200 ADSL2+ Dual Band Modem Router

Select IP over Ethernet. Edit the Enter Service Description which is optional. Suggest you keep the default. Select a network protocol you need: IPv4&IPv6 (Dual Stack). Click Next.

To finish WAN IP Settings, select Obtain an IP/IPv6 address automatically, check Dhcpv6 Prefix Delegation

(IAPD). If your ISP is using stateful DHCPv6, check Dhcpv6 Address Assignment (IANA) also. Or select Use the following Static IP/IPv6 address if your ISP provide you with an IPv6 address. Click Next. 38 Wireless AC1200 ADSL2+ Dual Band Modem Router

Finish Network Address Translation Settings. Suggest keeping the default settings. Click Next.

To configure the Default Gateway interface, select the interface that you want to configure with the WAN gateway address. Then click Next. 39 Wireless AC1200 ADSL2+ Dual Band Modem Router

To configure the WAN DNS address, finish both the IPv4 setting and IPv6 setting. Click Next. Note If Obtain an IP address automatically is chosen, DHCP will be enabled for PVC in IPoE mode. 40 Wireless AC1200 ADSL2+ Dual Band Modem Router

Click Apply/Save to save your settings if everything is correctly set. Here you can view your configurations. When the IPoE connection is successful, you can access the Internet.

Steps 1~7 above for IPoE and IPv4&IPv6 (Dual Stack) Users --------------------------------------------------------------------------------------------------

6) IPoE IPv6 Only Users If your ISP uses DHCP to assign your IP address or if your ISP assigns you a static (fixed) IP address, IP subnet mask and the gateway IP address, you need to select the IP over Ethernet (IPoE). After you configure the ATM Interface (ADSL uplink) and select EoA as the DSL link type, you can start to set up WAN service for accessing the Internet.

Click Advanced Setup > WAN Service and then click the Add button. 41 Wireless AC1200 ADSL2+ Dual Band Modem Router

Select the IPoA interface you added just now from the pull-down menu in the figure below. Click Next.

Select IP over Ethernet (IPoE). Edit the Enter Service Description field which is optional. Suggest you keep the default. Select a network protocol you need: IPv6 Only. Click Next. 42 Wireless AC1200 ADSL2+ Dual Band Modem Router

Finish WAN IP Settings on the figure below. Click Next.

Finish Network Address Translation Settings. Suggest keeping the default settings. Click Next.

To configure the Default Gateway interface when using IPv6, select the interface that you want to configure with the WAN gateway address in Selected WAN Interface box. Then click Next. 43 Wireless AC1200 ADSL2+ Dual Band Modem Router

44 Wireless AC1200 ADSL2+ Dual Band Modem Router Click Apply/Save to save your settings if everything is correctly set. Here you can view your configurations. When the IPoE connection is successful, you can access the Internet.

Steps 1~7 above for IPoE and IPv6 Only Users ------------------------------------------------------------------------------------------------------------------------------

7) Bridging If you wish to initiate a dialup directly from your PC for Internet access or enjoy the entire Internet connection (instead of sharing it with others), you can use the Bridging DSL link type and create a dialup program on your PC. After you configure the ATM Interface (ADSL uplink) and select EoA as the DSL link type, you can start to set up WAN service for accessing the Internet.

Click Advanced Setup > WAN Service and then click the Add button.

Select the ATM interface you added just now from the pull-down menu in the figure below. Click Next. 45 Wireless AC1200 ADSL2+ Dual Band Modem Router

Select Bridging. Edit the Enter Service Description field which is optional. Suggest you keep the default. Click Next. Click Apply/Save to save your settings if everything is correctly set.

46 Wireless AC1200 ADSL2+ Dual Band Modem Router Here you can view your configurations. When the Bridge connection is successful, you can access the Internet.

Steps 1~3 above for Bridging Users ---------------------------------------------------------------------------------------------------------------------------------------------------

8) PPPoA IPv4 Only Users After you configure the ATM Interface (ADSL uplink) and select PPPoA as the DSL link type, you can start to set up WAN service for accessing the Internet.

Click Advanced Setup > WAN Service and then click the Add button.

Select the ATM interface you added just now from the pull-down menu in the figure below. Click Next. 47 Wireless AC1200 ADSL2+ Dual Band Modem Router

Edit the Enter Service Description field which is optional. Suggest you keep the default. Select a network protocol you need: IPv4 Only. Click Next.

Set PPP Username and Password on the figure below. Suggest keeping other options default. Click Next. 48 Wireless AC1200 ADSL2+ Dual Band Modem Router

To configure the WAN DNS address, click the Select DNS Server Interface from available WAN interfaces option, or select the Use the following Static DNS IP address option and enter the static DNS server IP addresses provided by your ISP. At last, click Next. 49 Wireless AC1200 ADSL2+ Dual Band Modem Router Click Apply/Save to save your settings if everything is correctly set.

Here you can view your configurations. When the PPPoA connection is successful, you can access the Internet.

50 Wireless AC1200 ADSL2+ Dual Band Modem Router

Steps 1~6 above for PPPoA and IPv4 Only Users --------------------------------------------------------------------------------------------------------------------------

9) PPPoA IPv4&IPv6 (Dual Stack) Users After you configure the ATM Interface (ADSL uplink) and select PPPoA as the DSL link type, you can start to set up WAN service for accessing the Internet.

Click Advanced Setup > WAN Service and then click the Add button.

Select the ATM interface you added just now from the pull-down menu in the figure below. Click Next.

Edit the Enter Service Description which is optional. Suggest you keep the default. Select a network protocol you need: IPv4&IPv6 (Dual Stack). Click Next. 51 Wireless AC1200 ADSL2+ Dual Band Modem Router

Set PPP Username and Password on the figure below. Suggest keeping other options default. Click Next. 52 Wireless AC1200 ADSL2+ Dual Band Modem Router

To configure the Default Gateway interface, select the interface that you want to configure with the WAN gateway address. Then click Next.

To configure the WAN DNS address, finish both the IPv4 setting and IPv6 setting. Click Next. 53 Wireless AC1200 ADSL2+ Dual Band Modem Router Click Apply/Save to save your settings if everything is correctly set.

Here you can view your configurations. When the PPPoA connection is successful, you can access the Internet.

54 Wireless AC1200 ADSL2+ Dual Band Modem Router

Steps 1~6 above for PPPoA and IPv4&IPv6 (Dual Stack) Users -----------------------------------------------------------------------------------------------

10) PPPoA IPv6 Only Users After you configure the ATM Interface (ADSL uplink) and select PPPoA as the DSL link type, you can start to set up WAN service for accessing the Internet.

Click Advanced Setup > WAN Service and then click the Add button.

Select the ATM interface you added just now from the pull-down menu in the figure below. Click Next.

Edit the Enter Service Description which is optional. Suggest you keep the default. Select a network protocol you need: IPv6 Only. Click Next. 55 Wireless AC1200 ADSL2+ Dual Band Modem Router

Set PPP Username and Password on the figure below. Suggest keeping other options default. Click Next.

To configure the Default Gateway interface, select the interface that you want to configure with the WAN gateway address. Then click Next. 56 Wireless AC1200 ADSL2+ Dual Band Modem Router

To configure the WAN DNS address, finish both the IPv4 setting and IPv6 setting. Click Next.

57 Wireless AC1200 ADSL2+ Dual Band Modem Router Click Apply/Save to save your settings if everything is correctly set. Here you can view your configurations. When the PPPoA connection is successful, you can access the Internet.

Steps 1~6 above for PPPoA and IPv6 Only Users --------------------------------------------------------------------------------------------------------------------------

11) IPoA Users After you configure the ATM Interface (ADSL uplink) and select IPoA as the DSL link type, you can start to set up WAN service for accessing the Internet.

Click Advanced Setup > WAN Service and then click the Add button.

Select the ATM interface you added just now from the pull-down menu in the figure below. Click Next. 58 Wireless AC1200 ADSL2+ Dual Band Modem Router

Edit the Enter Service Description. This field is optional. Suggest to keep the default name. Click Next.

Set the WAN IP address and subnet mask provided by your ISP.

Finish Network address translation settings. Suggest keeping the default settings if youre not sure how to set them. Click Next. 59 Wireless AC1200 ADSL2+ Dual Band Modem Router

Finish the default settings on the following screen. To configure one interface with the default gateway, select and move the interface from Available Routed WAN Interfaces into Selected Default Gateway Interfaces. To cancel the interface as the selected default gateway interface, select and move the interface from the Selected Default Gateway Interfaces into Available Routed WAN Interfaces. Click Next.

Configure the DNS server of the interface you select. If you use static DNS IP address, select Use the following Static DNS IP address and then enter the DNS addresses provided by your ISP. Click Next. 60 Wireless AC1200 ADSL2+ Dual Band Modem Router Click Apply/Save to save your settings if everything is correctly set.

Here you can view your configurations. When the IPoA connection is successful, you can access the Internet.

Steps 1~7 above for IPoA Users -----------------------------------------------------------------------------------------------------------------------------------------------------------

61 Wireless AC1200 ADSL2+ Dual Band Modem Router 2.2.2 For ETH Interface Following 7 modes are for you to choose according to your actual Internet service. ETH PPPoE IPoE 7) Bridging 1) PPPoE IPv4 Only Users 1) IPv4 Only 2) IPv4&IPv6 (Dual Stack) 3) IPv6 Only 4) IPv4 Only 5) IPv4&IPv6 (Dual Stack) 6) IPv6 Only If you configure the ETH Interface (Ethernet uplink) and select eth0/eth0 as the ETH WAN interface, then you can start to set up WAN service for accessing the Internet.

Click Advanced Setup > WAN Service and then click the Add button.

Select the ETH interface you added just now from the pull-down menu in the figure below. Click Next.

Select PPP over Ethernet (PPPoE). Edit the Enter Service Description field which is optional. Suggest you keep the default. Select a network protocol: IPv4 Only. Click Next. 62 Wireless AC1200 ADSL2+ Dual Band Modem Router

Finish PPP Username and Password and other settings on the figure below. Click Next.

To configure the Default Gateway interface, select the interface that you want to configure with the WAN gateway address in Available Routed WAN Interfaces box and move it into Selected Default Gateway Interfaces box. The 63 Wireless AC1200 ADSL2+ Dual Band Modem Router default setting is recommended. Then click Next.

To configure the WAN DNS address, click the Select DNS Server Interface from available WAN interfaces option, or select the Use the following Static DNS IP address option and enter the static DNS server IP addresses provided by your ISP. At last, click Next. 64 Wireless AC1200 ADSL2+ Dual Band Modem Router Click Apply/Save to save your settings if everything is correctly set.

Here you can view your configurations. When the PPPoE connection is successful, you can access the Internet.

65 Wireless AC1200 ADSL2+ Dual Band Modem Router

Steps 1~6 above for PPPoE and IPv4 Only users ---------------------------------------------------------------------------------------------------------------------------

2) PPPoE IPv4&IPv6 (Dual Stack) Users If you configure the ETH Interface (Ethernet uplink) and select eth0/eth0 as the ETH WAN interface, then you can start to set up WAN service for accessing the Internet.

Click Advanced Setup > WAN Service and then click the Add button.

Select the ATM interface you added just now from the pull-down menu in the figure below. Click Next.

Select PPP over Ethernet (PPPoE). Edit the Enter Service Description field which is optional. Suggest you keep the default. Select a network protocol you need: IPv4&IPv6 (Dual Stack). Click Next. 66 Wireless AC1200 ADSL2+ Dual Band Modem Router

To configure the Default Gateway interface, select the interface that you want to configure with the WAN gateway address. Then click Next. 68 Wireless AC1200 ADSL2+ Dual Band Modem Router

To configure the WAN DNS address, finish both the IPv4 setting and IPv6 setting. Click Next. Click Apply/Save to save your settings if everything is correctly set.

69 Wireless AC1200 ADSL2+ Dual Band Modem Router

Here you can view your configurations. When the PPPoE connection is successful, you can access the Internet.

Steps 1~6 above for PPPoE and IPv4&IPv6 (Dual Stack) users ------------------------------------------------------------------------------------------------

3) PPPoE IPv6 Only Users If you configure the ETH Interface (Ethernet uplink) and select eth0/eth0 as the ETH WAN interface, then you can start to set up WAN service for accessing the Internet.

Click Advanced Setup > WAN Service and then click the Add button.

Select the ETH interface you added just now from the pull-down menu in the figure below. Click Next. 70 Wireless AC1200 ADSL2+ Dual Band Modem Router

Select PPP over Ethernet (PPPoE). Edit the Enter Service Description field which is optional. Suggest you keep the default. Select a network protocol: IPv6 Only. Click Next.

Configure PPP Username and Password and other settings on the figure below. Each field with its indication is mentioned above in PPPoE and IPv4 users section. If ISP provides you no static IPv6 address, you just keep the default settings for its by default the DHCP mode. Check Launch Dhcp6c for Prefix Delegation (IAPD). If your ISP is using stateful DHCPv6, check Launch Dhcp6c for Address Assignment (IANA) also. Click Next. 71 Wireless AC1200 ADSL2+ Dual Band Modem Router

73 Wireless AC1200 ADSL2+ Dual Band Modem Router

Here you can view your configurations. When the PPPoE connection is successful, you can access the Internet.

Steps 1~6 above for PPPoE and IPv6 Only users ---------------------------------------------------------------------------------------------------------------------------

4) IPoE IPv4 Only Users If you configure the ETH Interface (Ethernet uplink) and select eth0/eth0 as the ETH WAN interface, then you can start to set up WAN service for accessing the Internet.

Click Advanced Setup > WAN Service and then click the Add button.

Select the ETH interface you added just now from the pull-down menu in the figure below. Click Next.

Select IP over Ethernet (IPoE). Edit the Enter Service Description field which is optional. Suggest you keep the 74 Wireless AC1200 ADSL2+ Dual Band Modem Router default. Select a network protocol: IPv4 Only. Click Next.

Finish WAN IP Settings on the figure below. Click Next.

Finish Network Address Translation Settings. Suggest to keep the default settings. Click Next. 75 Wireless AC1200 ADSL2+ Dual Band Modem Router

To finish DNS Server Configuration, click the Select DNS Server Interface from available WAN interfaces option, or select the Use the following Static DNS IP address option and enter the static DNS server IP addresses provided by your ISP. At last, click Next. 76 Wireless AC1200 ADSL2+ Dual Band Modem Router Click Apply/Save to save your settings if everything is correctly set.

77 Wireless AC1200 ADSL2+ Dual Band Modem Router Here you can view your configurations. When the IPoE connection is successful, you can access the Internet.

Steps 1~7 above for IPoE and IPv4 Only users ---------------------------------------------------------------------------------------------------------------------------

5) IPoE IPv4&IPv6 (Dual Stack) Users If you configure the ETH Interface (Ethernet uplink) and select eth0/eth0 as the ETH WAN interface, then you can start to set up WAN service for accessing the Internet.

Click Advanced Setup > WAN Service and then click the Add button.

Select the ATM interface you added just now from the pull-down menu in the figure below. Click Next.

Select IP over Ethernet (IPoE).. Edit the Enter Service Description field which is optional. Suggest you keep the default. Select a network protocol you need: IPv4&IPv6 (Dual Stack). Click Next. 78 Wireless AC1200 ADSL2+ Dual Band Modem Router

To finish WAN IP Settings, select Obtain an IP/IPv6 address automatically, check Dhcpv6 Prefix Delegation

Finish Network Address Translation Settings. Suggest to keep the default settings. Click Next.

To configure the Default Gateway interface, select the interface that you want to configure with the WAN gateway address. Then click Next. 80 Wireless AC1200 ADSL2+ Dual Band Modem Router

To configure the WAN DNS address, finish both the IPv4 setting and IPv6 setting. Click Next.

Click Apply/Save to save your settings if everything is correctly set. 81 Wireless AC1200 ADSL2+ Dual Band Modem Router Here you can view your configurations. When the IPoE connection is successful, you can access the Internet.

Steps 1~7 above for IPoE and IPv4&IPv6 (Dual Stack) Users --------------------------------------------------------------------------------------------------

6) IPoE IPv6 Only Users If you configure the ETH Interface (Ethernet uplink) and select eth0/eth0 as the ETH WAN interface, then you can start to set up WAN service for accessing the Internet.

Click Advanced Setup > WAN Service and then click the Add button.

Select the ETH interface you added just now from the pull-down menu in the figure below. Click Next. 82 Wireless AC1200 ADSL2+ Dual Band Modem Router

Select IP over Ethernet (IPoE). Edit the Enter Service Description field which is optional. Suggest you keep the default. Select a network protocol: IPv6 Only. Click Next.

Finish WAN IP Settings on the figure below. Click Next. 83 Wireless AC1200 ADSL2+ Dual Band Modem Router

Finish Network Address Translation Settings. Suggest to keep the default settings. Click Next.

Here you can view your configurations. When the IPoE connection is successful, you can access the Internet.

Steps 1~7 above for IPoE and IPv6 Only Users ------------------------------------------------------------------------------------------------------------------------------

7) Bridging If you wish to initiate a dialup directly from your PC for Internet access or enjoy the entire Internet connection (instead of sharing it with others), you can use the Bridging DSL link type and create a dialup program on your PC. After you configure the ETH Interface (Ethernet uplink) and select eth0/eth0 as the ETH WAN interface, then you can start to set up WAN service for accessing the Internet.

Click Advanced Setup > WAN Service and then click the Add button. 86 Wireless AC1200 ADSL2+ Dual Band Modem Router

Select the ETH interface you added just now from the pull-down menu in the figure below. Click Next.

Select PPP over Ethernet (PPPoE). Edit the Enter Service Description field which is optional. Suggest you keep the default. Select a network protocol: IPv4 Only. Click Next. 87 Wireless AC1200 ADSL2+ Dual Band Modem Router Here you can view your configurations. Click Apply/Save to save your settings if everything is correctly set.

When the connection is successful, you can access the Internet.

88 Wireless AC1200 ADSL2+ Dual Band Modem Router

Steps 1~3 above for Bridging Users ---------------------------------------------------------------------------------------------------------------------------------------------------

2.3 LAN Click Advanced > LAN to configure the LAN IP Address and Subnet Mask. This IP address is to be used to access the devices settings through a web browser. Suggest to take a note of the IP address or subnet mask you input here. 2.3.1 IPv4 Click Advanced > LAN to enter the IPv4 address setting interface.

Keep the Group Name Default in the pull-down menu. 89 Wireless AC1200 ADSL2+ Dual Band Modem Router

IP Address/Subnet Mask: The device's LAN IP address and subnet mask that both you can change to fit your network. The default IP address is 192.168.1.1. Once you change the LAN IP address, you need to use the new address to login to the Management page to configure the modem router.

Enable IGMP Snooping: Check to enable the IGMP Snooping feature. IGMP Snooping is to restrain broadcast on Layer 2. Enabling IGMP snooping is good for managing and controlling IPv4 broadcasts. Suggest to select Blocking Mode.

Standard Mode: If no members join in one broadcast group, packets of this group will be broadcasted; if therere members joining in the group, packets will be only forwarded to the LAN port where the group members exist.

Blocking Mode: If no members join in one broadcast group, packets of this group will be dropped; if theres members joining in the broadcast group, packets will be only forwarded to the LAN port where the group members exist.

Enable DHCP Server: Check to enable the DHCP Server so that every upstream device connected to your router can obtain the IP address to access the Internet. If you would like to configure every upstream device with static IP address to access the Internet, you can check Disable DHCP Server.

Start/End IP Address: Specify the start/end of the range for the IP address pool in the same subnet as the router. Only enabling DHCP server can this section can be edited.

Leased Time: A time length that the IP address is assigned to each device before it is refreshed.

Static IP Lease List: A list of devices with reserved static IP addresses. If you prefer to configure each upstream device of your router with a static IP address for better management, you can add static IP addresses to the list.

Add Entries: Click to add a static IP lease entry. A maximum 32 entries can be configured.

Remove Entries: Click to remove a static IP lease entry.

Configure the second IP Address and Subnet Mask for LAN interface: If you want to configure two IP addresses for the LAN interface, you can check this option and enter the second IP Address and Subnet Mask manually. The second IP address and subnet mask have the same function as the first ones.

Apply/Save: After you configure all the needed settings, click this button to apply and save them. Tip DHCP (Dynamic Host Configuration Protocol) assigns an IP address to each device on the LAN/private network. When you enable the DHCP Server, the DHCP Server will automatically allocate an unused IP address from the IP address pool specified in this screen to the requesting device as long as the device is set to "Obtain an IP Address Automatically". By default, the router functions as a DHCP server. 90 Wireless AC1200 ADSL2+ Dual Band Modem Router 2.3.2 IPv6 Autoconfig IPv6 address can only be Aggregatable Global Unicast Addresses and Unique Local Address. Link-Local Unicast Addresses and Multicast Addresses are not permitted. Click Advanced > LAN > IPv6 Autoconfig to enter the IPv6 address setting page.

Interface Address: Enter the interface address with prefix length. E.g., the interface address is 2000::1/64, then you need to input http://[2000::1].

Enable DHCPv6 Server: Check to enable the DHCPv6 Server.

Check Stateless or Stateful as you need.

Stateless: If selected, IPv6 clients will generate IPv6 addresses automatically based on the Prefix Delegation's IPv6 prefix and their own MAC addresses.

Stateful: Stateful DHCPv6 is supported based on the assumption of prefix length less than 64. Select this option and configure the start/end interface ID and leased time. The router will automatically assign IPv6 addresses to IPv6 clients.

Enable RADVD: Check it to enable the RADVD for informing computers in the LAN of your routers existence. 91 Wireless AC1200 ADSL2+ Dual Band Modem Router When computers get the message, they will take the routers IP address as the secondary route for easy use. In addition, checking RADVD can also broadcast the prefix address generated from the computer in the LAN.

Click Save/Apply. Other fields introduction that may help:

Enable ULA Prefix Advertisement: If enabled, the router will advertise ULA prefix periodically.

Leased Time (hour): A time length that the IP address is assigned to each device before it is refreshed.

Start interface ID/End interface ID: Specify the start/end interface ID Interface ID does NOT support ZERO COMPRESSION "::". Please enter the complete information. For example: Please enter "0:0:0:2" instead of "::2".

Randomly Generate: If selected, address prefix can be automatically generated.

Statically Configure: If you select this option, you need to manually configure the address prefix and life time.

Prefix: Specify the prefix.

Preferred Life Time (hour): Specify the preferred life time in hour.

Valid Life Time (hour): Specify the valid life time in hour.

Enable MLD Snooping: MLD is used by IPv6 routers for discovering multicast listeners on a directly attached link. If disabled on layer2 devices, IPv6 multicast data packets will be broadcast on the entire layer2; if enabled, these packets will be multicast to only specified recipient instead of being broadcast on the entire layer2. 2.4 NAT 2.4.1 Virtual Server The Virtual Server is useful for web servers, ftp servers, e-mail servers, gaming and other specialized Internet applications. Scenario: If you have a server in the LAN, such as a website, FTP server or game server, you want e-friends to visit the 92 Wireless AC1200 ADSL2+ Dual Band Modem Router server, but the firewall and NAT function of your router stop visitors from accessing computers in the LAN. Solution: Set virtual server rules to allow visitors to access the server via WAN IP address of your router. Click Advanced Setup > NAT > Virtual Servers to enter the virtual server setup page. Click Add to add rules.

User Interface: Select the WAN interface you will use to visit the server in your LAN.

Configure the Service Name > Select a Service option to select an existing service (Select One here is only an express to tell you select one service.) from the drop-down list. And then the corresponding external/internal start/end port will prompt automatically. Or configure Service Name > Custom Service to customize a service manually.

Server IP Address: Enter the IP address of your local computer that will provide this service.

Click Apply/Save next to the Server IP Address or click Apply/Save next to the port number table. Other fields introduction that may help:

External Port Start/External Port End: Server ports provided for Internet users accessing the LAN. 93 Wireless AC1200 ADSL2+ Dual Band Modem Router Protocol: Select the protocol from the Protocol drop-down list. If you are unsure, select TCP/UDP. Internal Port Start/Internal Port End: The ports used by the server in the LAN. After all the configurations, visitors on the Internet can access your server by simply using Protocol Name://WAN IP address: External Port. Note If you have enabled the UPnP functionality on both the router and your PC that is attached to one of the LAN port on the router, you will be prompted on the Virtual Server page that the UPnP interface is being used. Application Scenario:

You have set up one web server on the LAN. Web serverIP: 192.168.1.50, TCP port: 8090. Now you hope friends on the Internet can access your web by Port 10480 through WAN port. WAN portipoe_eth1, IP: 1.2.3.4 Configuration Steps:

Click Advanced Setup > NAT > Virtual Server to enter it and then click the Add button.

94 Wireless AC1200 ADSL2+ Dual Band Modem Router

Select the WAN interface ipoe_eth/eth0.1 here.

Input the word web in the Custom Service field. Then manually enter the port number 10480 in the External Port Start and External Port End fields, and enter the port number 8090 in the Internal Port Start and Internal Port End fields. Actually port in the Internal Port End filed follows the port number in the Internal Port Start field automatically.

Select a protocol from the Protocol drop-down list. If you are unsure, select TCP/UDP.

In the Server IP Address field, enter the IP address of the web server: 192.168.1.50. 95 Wireless AC1200 ADSL2+ Dual Band Modem Router

Click Apply/Save next to the Server IP Address or click Apply/Save next to the port number table. Result:

Your friend on the Internet will be able to access your web server simply by entering http://1.2.3.4:10480 in browser. Actually if you set the DNS in 2.9, your friend can also enter http://admin name:10480 to access your web server. 2.4.2 Port Triggering Ports of some applications such as games, video conferencing and instant messenger, etc., are specified and meanwhile, your routers firewall will stop messages to/from such ports, so for those applications, you cannot use them properly. However, Port Triggering is provided to help your play such games, or use this kind of instant messenger normally. Some safety system applications (like, safe guard and firewall) in the computer on the LAN may interfere with the Port triggering function. When using Port triggering, you can disable such applications. Click Advanced Setup > NAT > Port Triggering and then click the Add button to add rules.

96 Wireless AC1200 ADSL2+ Dual Band Modem Router Here in the Port Triggering interface, you can configure the port settings by selecting an existing application or creating your own (Custom application).

User Interface: Select the WAN interface you will use to visit the server in your LAN.

Configure the Application Name > Select an application to select an existing application (Select One here is only an express to tell you select one application.) from the drop-down list. And then the corresponding trigger start/end port will prompt automatically. Or configure Application Name > Custom application to customize an application manually.

Trigger Protocol: Select the protocol from the drop-down list. If you are unsure, select TCP/UDP.

Click Save/ Apply next to the Custom application or click Save/ Apply next to the port number table. Other fields introduction that may help:

Trigger Port Start/End: The port range for an application to initiate connections. Open Port Start/End: After the application connection is established, the built-in firewall of the router will open ports between the start port number and end port number automatically. Application Scenario:

You always use ICQ to communicate with computers on the Internet. You hope your LAN is secure and your instant communication with other computers can be smoother. The WAN port now is ipoe_eth1. Solution:

97 Wireless AC1200 ADSL2+ Dual Band Modem Router 2.4.3 DMZ Host The default DMZ (De-Militarized Zone) host feature is helpful when you are using some online games and videoconferencing applications that are not compatible with NAT (Network Address Translation). Note that enabling DMZ host means the built-in firewall of your router takes no effect, and your computer thats set as the DMZ host will totally expose itself to the Internet. In this case, hacker may easily attack the DMZ host. Strongly recommend you to disable DMZ host and clear all the DMZ host settings as soon as possible when you do not use it. Click Advanced Setup > NAT > DMZ Host, input the IP address of the computer that you want to configure as the DMZ host into the DMZ Host IP Address field. At last, click Save/Apply. 98 Wireless AC1200 ADSL2+ Dual Band Modem Router 2.5 Security 2.5.1 IP Filtering

Outgoing IP Filtering Setup If you want to limit computers in the LAN to access the Internet, go to Outgoing section to set the router. Click Advance Setup > Security > IP Filtering > Outgoing, and then click Add to configure outgoing IP filters.

Filter Name: Enter a descriptive filtering name.

IP Version: Select IPv4.

Protocol: TCP/UDP, TCP, UDP and ICMP are available for your option. 99 Wireless AC1200 ADSL2+ Dual Band Modem Router

Source IP address [/prefix length]: Enter the LAN IP address to be filtered.

Source Port (port or port: port): Specify a port number or a range of ports used by LAN PCs to access the Internet. If you are unsure, leave it blank.

Destination IP address [/prefix length]: Specify the external network IP address to be accessed by specified LAN PCs.

Destination Port (port or port:port): Specify a port number or a range of ports used by LAN PCs to access external network.

Click Apply/Save to save and activate the filter.

Click Advance Setup > Security > IP Filtering > Incoming, and then click Add to configure incoming IP filters. Incoming IP Filtering Setup

100 Wireless AC1200 ADSL2+ Dual Band Modem Router

Filter Name: Specify a new filter name for identifying the incoming IP traffic.

IP Version: Select either IPv4.

Protocol: TCP/UDP, TCP, UDP and ICMP are available for your option.

Source IP address [/prefix length]: Enter the Internal IP address [/prefix length] to be filtered.

Source Port (port or port:port): Specify a port number or a range of ports used by PCs from external network to access your internal network.

Destination IP address [/prefix length]: Specify the internal network IP address [/prefix length] to be accessed by the specified PCs from external network.

Destination Port (port or port:port): Specify a port number or a range of ports used by PCs from external network to access your internal network.

Click Apply/Save to save and activate the filter. 2.5.2 MAC Filtering A bridge WAN service is needed to configure this service. MAC Filtering is only effective on ATM PVCs configured in Bridge mode. FORWARDED means that all MAC layer frames will be FORWARDED except those matching with any of the specified rules in the following table. BLOCKED means that all MAC layer frames will be BLOCKED except those matching with any of the specified rules in the following table. Choose Add enter the following screen. (Note that changing from one policy to another of an interface will cause all defined rules for that interface to be REMOVED AUTOMATICALLY! You will need to create new rules for the new policy.) 101 Wireless AC1200 ADSL2+ Dual Band Modem Router

Here you can create a filter to identify the MAC layer frames by specifying at least one condition below. If multiple conditions are specified, all of them take effect.

Protocol Type: Select a protocol type from the drop-down list.

Destination MAC Address: Enter the destination MAC address to which you wish to apply the MAC filtering rule.

Source MAC Address: Enter the source MAC address to which you wish to apply the MAC filtering rule.

Frame Direction: Select a frame direction from the drop-down list.

WAN Interfaces: Select a WAN interface from the drop-down list.

Click Apply/Save to save and activate the filter. 2.6 Parental Control 2.6.1 Time Restriction Click Parental Control > Time Restriction > Add to enter the following screen. Here you can add time of day restriction that an attached LAN device can access the Internet.

User Name: Enter a user name. 102 Wireless AC1200 ADSL2+ Dual Band Modem Router

Browser's MAC Address: This section will automatically add the MAC address of the attached LAN device where the browser is running.

Other MAC Address: Specify MAC address of the computer which you want to apply Internet access restriction to.

Days of the week: Click to select the days of the week during which you wish to restrict Internet access.

Start Blocking Time/End Blocking Time: Specify time of day restriction to an attached LAN device. Within this specified time length of the day, this LAN device will be blocked from the Internet.

Apply/Save: Click to Apply/Save your settings. 2.6.2 URL Filter Click Parental Control > Url Filter to enter the following screen.

Select the URL List Type, Exclude or Include as you need.

Exclude: Devices on the LAN side of your router are not allowed to access the URLs specified on the list.

Include: Devices on the LAN side of your router are only allowed to access the URLs specified on the list.

Click Add to add the URLs that all PCs in the device network can(not) access. Up to 100 entries can be configured. Note If you have accessed the URL before you include it in a URL filter rule, you must reboot the modem router and erase it from your PC to activate this URL filter rule. To erase the domain name from your PC, click Start > Run (Windows XP for references), enter cmd and then type ipconfig /flushdns. 103 Wireless AC1200 ADSL2+ Dual Band Modem Router 2.7 Bandwidth Control Click Advanced Setup > Bandwidth Control, and check Bandwidth Control to enable this feature on the screen.

Up to 16 entries can be allowed.

Description: Enter the description of the controlled host.

IP Address Range: Enter the IP address of the host you want to control. It can be a single host or hosts. If you want to limit a single IP addresss bandwidth, just keep the start IP same with the end IP. Like, 192.168.100.2-2

Max Upstream Speed (Kbps): Set the max upstream speed.

Max downstream Speed (Kbps): Set the max downstream speed.

Status: You can change the current status of the controlled hosts, or you can select Enable/Disable from the drop-down list to enable/disable the current control rule.

Action: Here display the actions you can do about the corresponding rule. There are tow actions: Edit and Delete.

Edit: Click the Edit button corresponding to the ID to eidt its control rule. Click OK to apply the modification.

Delete: Click the Delete button corresponding to the ID to delete its control rule. 104 Wireless AC1200 ADSL2+ Dual Band Modem Router

Add: Aftre finishing the bandwidth control settings, click Add to generate the control rule.

Apply/Save: Click this button to activate your configurations. 2.8 Routing 2.8.1 Default Gateway This section is to set the default forwarding interface of the data in the same network segment of the WAN IP or LAN IP of your modem router. Click Advanced Setup > Routing > Default Gateway to enter this section.

Selected Default Gateway Interfaces: Displays the selected default gateway interfaces. Select a WAN interface and click the button to move it to the Available Routed WAN Interfaces box.

Available Routed WAN Interfaces: Displays the available routed WAN interfaces. Select a WAN interface and click the button to add it to the Selected Default Gateway Interfaces box.

Selected WAN Interface: Select the current effective default IPv6 gateway interface from the pull-down menu if you use IPv6 connection.

Apply/Save: Click to save and activate your settings. 105 Wireless AC1200 ADSL2+ Dual Band Modem Router 2.8.2 Static Route It is not recommended to use this setting unless you are familiar with static routing. In most cases, dynamic routing is recommended, because this feature allows the router to detect the physical changes of the network layout automatically. If you want to use static routing, make sure the routers DHCP function is disabled. Static routes provide additional routing information to your router. When there are several routers in the network, you may want to set up static routing. Static routing determines the path of the data in your network. You can use this feature to allow users on different IP domains to access the Internet via this device. Click Add to enter the following screen:

IP Version: Select either IPv4 or IPv6.

Destination IP address/prefix length: Enter the destination IP address and prefix length of the final destination.

If the destination host is one specified host, its prefix is 32. E.g., the specified host 1.2.3.4 can be expressed as 1.2.3.4/32.

If the destination host is one specified network, the IP address is the network number of destination host. E.g., 106 Wireless AC1200 ADSL2+ Dual Band Modem Router the specified network 2.2.3.3, 255.255.0.0 can be expressed as 2.2.0.0/16 indicating all hosts that starts with 2.2.

Interface: Select an interface from the drop-down list according to your need. This interface can be the one on the LAN side or WAN side that data will forwarded out by.

Gateway IP address: Input the ingress IP address of the next hop which packets are forwarded to from your modem router.

Metric: Set the metric of this static route rule. Its optional. The lower the value is, the higher the priority will be. When this two static routes destination address are the same, packets will be forwarded by following the higher priority route rule.

Apply /Save: Click to apply and save your settings. Note 1. Destination IP address cannot be on the same IP segment as WAN or LAN segment as the router. 2. Only configure additional static routes for unusual cases such as multiple routers or multiple IP subnets located on your network. Wrong static routes may lead to network failure. 3. For system created route, the Remove checkbox is disabled. 2.8.3 RIP RIP is an advanced protocol used in the ISP environment to maintain the backbone network, for dynamically refreshing and generating the route table within each router that supports RIP. If all these route tables are managed by human beings, it will be a lot of work. RIP here helps automatically learn the router table and share the refreshment with RIP-based routers. Click Advanced Setup > Routing > RIP. If the following figure shows, it means NAT feature on the WAN interface is enabled and RIP cannot be configured. 107 Wireless AC1200 ADSL2+ Dual Band Modem Router In this case, you should go to Advanced Setup > WAN Service > Network Address Translation Settings to disable NAT. Then go back here. You should be displayed with the following figure. Operation-Passive indicates the RIP-enabled router will automatically tell other surrounding RIP-enabled routers the newest route table and share the newest route table with them. Operation-Active indicates the RIP-enabled router will receive and share messages sent by another RIP-enabled router and then refresh its own route table. Click Apply/Save to take the current settings into effect. 2.9 DNS 2.9.1 DNS Server (Static DNS) The DNS server translates domain names to numeric IP addresses. It is used to look up site addresses based on their names. Here you can configure the WAN DNS address:

For IPv4

Click Advanced Setup > DNS > DNS Server, and enter the screen below. See the upper part for IPv4 setting. 108 Wireless AC1200 ADSL2+ Dual Band Modem Router

Check the Select DNS Server Interface from available WAN interfaces option. OR select the Use the following Static DNS IP address option and enter static DNS server IP addresses for the system.

Click Apply/Save at the bottom of the page. For IPv6

Click Advanced Setup > DNS > DNS Server, and enter the screen below. See the lower part for IPv6 setting. 109 Wireless AC1200 ADSL2+ Dual Band Modem Router

Select the Obtain IPv6 DNS info from a WAN interface option, and select a configured WAN interface for the IPv6 DNS server information. Or select the Use the following Static IPv6 DNS address option and enter the static IPv6 DNS server Addresses.

Click Apply/Save. Note 1. DNS Server Interfaces can have multiple WAN interfaces served as system DNS servers but only one will be used according to the priority with the first being the highest and the last one the lowest priority if the WAN interface is connected. Priority order can be changed by removing all and adding them back in again. 2. In ATM mode, if only a single PVC with IPoA or static IPoE protocol is configured, Static DNS server IP addresses must be entered. 3. If you are not clear about the static DNS server IP information, ask your ISP to provide it. 4. The default settings are recommended if you are unsure about the DNS server addresses. If a wrong DNS server address is configured, webpages may not be open. 2.9.2 Dynamic DNS (DDNS) If your Internet service provider (ISP) gave you a static (fixed) public IP address, you can register a domain name and have that name associated with your IP address by public Domain Name Servers (DNS). However, if your ISP gave you a dynamic (changing) public IP address, you cannot predict what your IP address will be, and the address can change frequently. In this case, you can use a commercial Dynamic DNS service. It lets you register your domain to the IP address and forwards traffic directed at your domain to your frequently changing IP address. If your ISP assigns a private WAN IP address (such as 192.168.x.x or 10.x.x.x), the Dynamic DNS service does not work because private addresses are not routed on the Internet. Click Advanced Setup > DNS > Dynamic DNS to enter the Dynamic DNS screen. 110 Wireless AC1200 ADSL2+ Dual Band Modem Router

Click the Add button to configure the DDNS settings.

D-DNS Provider: Select your DDNS service provider from the drop-down menu.

Hostname: Enter the DDNS domain name registered with your DDNS service provider.

Interface: Specify a WAN connection interface.

Username: Enter the DDNS user name registered with your DDNS service provider.

Password: Enter the DDNS Password registered with your DDNS service provider.

Click Apply/Save to take the setting into effect. Example:

D-DNS provider: Dyndns.org Username: qiangweianbian Password: 414637 Hostname: xhh3793.dyndns.org Configuration Steps:

111 Wireless AC1200 ADSL2+ Dual Band Modem Router

Select DynDNS.org from the D-DNS provider drop-down menu.

Enter the Dyndns hostname, xhh3793.dyndns.org.

Specify the WAN connection interface, ipoe_eth0/eth0.1.

Enter the DynDNS username, qiangweianbian.

Enter the password of your DynDNS.org account, 414637.

Click Apply/Save to save your configurations. At last you will see the table below. 2.10 DSL This screen provides multiple ASDL modulation modes to meet diversified environments. You can also select phone line pair and Capability. DSL parameter configurations must be supported by ISP to take effect. Actual parameters (see Statistics-xDSL) resulted from the negotiation between your router and ISP. Wrong configurations may fail your Internet access. 112 Wireless AC1200 ADSL2+ Dual Band Modem Router The best DSL configurations are the factory defaults. Only change them if you are instructed by your ISP or our technical staff when your router fails to negotiate with ISP in DSL (ATM) mode. Usually, this failure can be identified and confirmed if the ADSL LED on the device keeps displaying a slow or quick blinking light. Check the checkbox next to a modulation to enable it and then click Apply/Save. Advanced Settings: Click it to enter the Advanced Settings screen as below.

113 Wireless AC1200 ADSL2+ Dual Band Modem Router

Click Tone Selection to enter the prompt window below. Tip If you are unsure about the ADSL parameters, please apply the factory default settings. Wrong configurations may fail your Internet access. 2.11 UPnP UPnP (Universal Plug and Play) allows Windows based systems to configure the device for various Internet applications automatically. UPnP devices can automatically discover the services from other registered UPnP devices on the network. If you use applications such as multiplayer gaming, peer-to-peer connections, or real-time communications, like instant messaging or remote assistance (a feature in Windows XP), you should enable UPnP. 114 Wireless AC1200 ADSL2+ Dual Band Modem Router

Enable UPnP: Check/uncheck to enable/disable the UPnP feature.

Click Apply/Save. Note UPnP is activated only when there is a live WAN service with NAT enabled. 2.12 Print Server Enabling Print Server makes all PCs on the LAN have an access to the USB printer which has been connected to this router. Click Advanced Setup > Printer Server to enter screen below:

USB printing config:

Connect the USB printer to the USB port of the device. 115 Wireless AC1200 ADSL2+ Dual Band Modem Router

Enable USB printing service of the device (the router). First, enter the name of the USB printer in Printer name box. Then, enter the manufacturer and model of the USB printer in the Make and model box. At last, click Apply/Save.

Add the printer from your local PC (In Windows XP OS). Step 1: Click Start > Control Panel > Printers and Faxes > Add a printer;

Step 2: Click Next;

116 Wireless AC1200 ADSL2+ Dual Band Modem Router Step 3: Select A network printer, or a printer attached to another computer and click Next;

Step 4: Select Connect to a printer on the Internet or on a home or office network;

Type in http://192.168.1.1:631/printers/hp3845 in the URL field and click Next;

117 Wireless AC1200 ADSL2+ Dual Band Modem Router Note Here 192.168.1.1 refers to this routers LAN IP address and hp3845 refers to the USB printer name youve filled in on the Print Server Settings page. Step 5: Insert the printer driver CD into your computer and click Have Disk;

Step 6: Click Browse, select driver file directory on CD-ROM and click OK;

118 Wireless AC1200 ADSL2+ Dual Band Modem Router Step 7: Select the manufacturer and the model of your printer. And click OK. Step 8: Choose Yes or No for default printer setting and click Next. 119 Wireless AC1200 ADSL2+ Dual Band Modem Router Step 9: Click Finish. Check the status of printer from Windows Control Panel, printer window. Status should be shown ready. 120 Wireless AC1200 ADSL2+ Dual Band Modem Router 2.13 Storage Service This section helps you to use USB Storage devices in your modem router, including the following parts:

User Account: You can control the LAN users accessing to the USB storage device information, namely, some of them can access the USB device info but others cannot. Storage Device Info: When you plug the USB storage device into the USB interface of your modem router, the router can recognize thats the USB storage device and then read the storage devices information. 2.13.1 User Account Before you share your USB storage on the internet, you need to add a storage user account. And only the users on the user account list can visit the USB storage device plugged in the modem router. Thus, before you access the USB storage device, set the user account information first. To add a new account:

Click Add to enter the user account configuration page. 121 Wireless AC1200 ADSL2+ Dual Band Modem Router

Username: Name your USB storage account.

Password: Specify a password to secure your USB storage account.

Confirm Password: Enter your password again for a confirmation.

VolumeName: Enter the volume name of the USB storage, which is displayed in the Storage Device Info page.

Click Apply/Save to save your configurations. At last, you will see the table shown as below. Heres an example. 2.13.2 Storage Device Info Your modem router can automatically recognize the USB storage device and the Storage Device Info screen will show the information such as the label, file system type, total disk space, used disk space. 122 Wireless AC1200 ADSL2+ Dual Band Modem Router After your modem router recognizes the USB storage device, follow guidelines below for visiting the storage info via the computer on the LAN. Here takes Windows 7 as an example to explain the guidelines which are similar in other operation systems.

Press Win+R buttons. On the Run window, input \\192.168.1.1 (\\+ LAN IP address of the router), and then click OK.

Double click the USB storage device icon (mnt). 123 Wireless AC1200 ADSL2+ Dual Band Modem Router

Account authentication: Enter your user account name and password which were configured in User Account part in the corresponding box, and click OK. Then you can see the detailed info within the USB device. 2.14 Interface Grouping Interface Grouping supports multiple ports to PVC and bridging groups. Each group will perform as an independent network. Only the default group has IP interface. Click Advanced Setup > Interface Grouping to enter the following figure. 124 Wireless AC1200 ADSL2+ Dual Band Modem Router

Click Add to enter the screen below. Group Name: The name of a configured rule. WAN Interface used in the grouping: WAN connection to which the interface grouping rules apply. Available LAN Interfaces: LAN interfaces that can be used for interface grouping. Grouped LAN Interfaces: LAN interfaces that use specified WAN interface. To create a new interface group:

125 Wireless AC1200 ADSL2+ Dual Band Modem Router

Enter the Group name which should be unique.

Select the WAN interface thats shared by the LAN interfaces in the interface group.

Select interfaces that will be connected to the specified WAN you will use. Note that these clients may obtain public IP addresses.

Click Apply/Save button to make the changes effective immediately. If you want to bypass NAT via the routers interface and obtain the public IP address automatically, you need to add the DHCP vendor ID in the Automatically Add Clients with the following DHCP Vendor IDs section. After the ID takes effect, your router will automatically detect the DHCP request from computers on the LAN, and it will forward the DHCP vendor ID and the corresponding DHCP request to the WAN interface used in the interface rules. Application:

Your ADSL line support 2 PVC groups: ppp0.1 used for home users to access the Internet; atm.1.1 used for guests to access the Internet. You hope that eth3 (Interface 4 on the modem router) can be used for guests to visit the Internet, and meanwhile data of the guest wont be forwarded to other interfaces. Configurations are as below in the figure.

126 Wireless AC1200 ADSL2+ Dual Band Modem Router Note 1. After the settings above, you need to reboot the modem router to take the settings into effect. 2. After the settings above, the LAN IP address used by the Default group member is 192.168.1.1, the LAN IP of the second group member is 192.168.2.1. LAN IPs of the following groups follows the same rule. 3. After you set the IPTV function, the modem router will automatically add one interface group named IPTV, which should be saved. If its deleted, the IPTV function takes no effect. 2.15 IP Tunnel This section explains the following information:

IPv6inIPv4 IPv4inIPv6 2.15.1 IPv6inIPv4 Keeping the current IPv4 network frame, IPv6 in IPv4 accomplishes support to IPv6, for solving problems of communications between IPv6 stations or hosts, which is commonly used during IPv6 initially imported period. Click IPv6inIPv4 and Add to enter the following screen. 127 Wireless AC1200 ADSL2+ Dual Band Modem Router

Tunnel Name: Specify the name of the tunnel.

Mechanism: Currently, only 6RD configuration is supported.

Associated WAN Interface: Specify the WAN interface of the tunnel.

Associated LAN Interface: Specify the LAN interface of the tunnel.

Manual: If you select Manual, configure the following settings also:

IPv4 Mask Length: Specify the IPv4 Mask Length.

6rd Prefix with Prefix Length: Specify the 6rd Prefix with Prefix Length.

Border Relay IPv4 Address: Specify the Border Relay IPv4 Address. Automatic: If Automatic is selected, no other configurations are required.

Apply/Save: Click to apply and save your settings. 2.15.2 IPv4inIPv6 Via network devices, IPv4 in IPv6 support IPv6 to establish the network fundamental network frame, so as to systematically import IPv6. As for the current IPv4, IPv4 in IPv6 accomplishes the inheritance of usage of IPv4, namely regarding IPv4 as one of IPv6 business. This IPv4 in IPv6 function mainly refers to IPv6, as well as the newly created IPv4 business or the network that wont adopt dual stack. Click IPv4inIPv6 and Add to enter the following screen:

128 Wireless AC1200 ADSL2+ Dual Band Modem Router

Tunnel Name: Specify the name of the tunnel.

Mechanism: Currently, only DS-Lite configuration is supported.

Associated WAN Interface: Specify the WAN interface of the tunnel.

Associated LAN Interface: Specify the LAN interface of the tunnel.

Manual: If you select Manual, enter the AFTR information also:

Automatic: If Automatic is selected, no other configurations are required.

Apply/Save: Click to apply and save your settings. 2.16 Certificate This section explains the following information:

Local Certificates Trusted CA (Certificate Authority) Certificates 2.16.1 Local Certificates This section is to apply a CA certificate, or import the CA certificate you applied before, for other network devices to verify your modem routers identification. 129 Wireless AC1200 ADSL2+ Dual Band Modem Router To create a certificate signing request:

Click the Create Certificate Request button to enter the page below.

Specify the Common Name, Organization Name and State/Province Name

Enter the 2-letter Country Code for the certificate.

Click Apply to apply your settings. 130 Wireless AC1200 ADSL2+ Dual Band Modem Router To Import certificate

Click the Import Certificate button on the local certificates page to enter the page below.

Enter the certificate name.

Paste the certificate content and private key.

Click Apply to apply your settings. 2.16.2 Trusted CA (Certificate Authority) Certificates The CA certificate added to other network devices here is used for verifying the identification of other network devices. E.g., in TR-069, you can import the correct ACS servers CA certificate, to verify the ACS servers identification. 131 Wireless AC1200 ADSL2+ Dual Band Modem Router To Import certificate

Click the Import Certificate button to enter the page below.

Enter the certificate name.

Paste the certificate content.

Click Apply to apply your settings. 132 Wireless AC1200 ADSL2+ Dual Band Modem Router 2.17 Multicast To configure IGMP for IPv4

Check the LAN to LAN (Intra LAN) Multicast Enable box.

Check the Membership Join Immediate (IPTV) box. This is only required for IPTV.

Keep other options unchanged from factory defaults if you are not an advanced user. This is strongly recommended. To configure IGMP for IPv6

Check the LAN to LAN (Intra LAN) Multicast Enable box.

Keep other options unchanged from factory defaults if you are not an advanced user. This is strongly recommended. 133 Wireless AC1200 ADSL2+ Dual Band Modem Router 2.18 IPTV If you check the Enable IPTV checkbox, you must choose a layer2 interface, and then configure the PVC/VLAN info

(ATM), or ETH port/VLAN info (ETH). Click Apply/Save button to save it. Enable IPTV: Check/uncheck to enable/disable the IPTV service. 134 Wireless AC1200 ADSL2+ Dual Band Modem Router IPTV configuration for Phone Cable Access user:

1) Enable IPTV. 2) Select Layer2 interface: ATM Interface. 3) Configure an avaliable VPI/VCI value which should be provided by your ISP. 4) Click Apply/Save. IPTV configuration for Ethernet Cable Access user:

1) Enable IPTV. 2) Select Layer2 Interface: ETH Interface. 3) Click Apply/Save. After successful IPTV configuration, Port 4 on the back panel of the device can only be an IPTV port Tip For tagged service, enter valid 802.1P Priority and 802.1Q VLAN ID. For untagged service, set -1 to both 802.1P Priority and 802.1Q VLAN ID. 3. Wireless 3.1 2.4G There are five submenus under the Wireless menu Wireless: Basic, Security, MAC Filter, Wireless Bridge and Station Info. Click any of them, and you will be able to configure the corresponding functions. 135 Wireless AC1200 ADSL2+ Dual Band Modem Router 3.1.1 Basic Click Wireless > 2.4G > Basic to enter the page where you can configure the basic settings of the wireless network of 2.4GHz. Enable Wireless: check/uncheck to enable/disable the wireless network of 2.4GHz. Hide Access Point: This option allows you to have your wireless network names (SSID) publicly broadcast or if you choose to enable it, the SSID will be hidden. SSID: Service Set Identifier. This is the name of your wireless network. Country: Select your country from the drop-down list. Channel: Select a channel or select Auto to let system automatically select one for your wireless network to operate on if you are unsure. The best selection is a channel that is the least used by neighboring networks. The default selection is Auto. Bandwidth: Select the bandwidth from the drop-down list. There are two selections provided, 20MHz and 40MHz. The default setting is 40MHz. Apply/Save: Click it to apply your current configurations. 3.1.2 Security Click Wireless > 2.4G > Security to enter the page where you can configure the security settings of wireless network of 2.4GHz. Note 1. To use the WPS security, the wireless client must be also WPS-capable. 2. When both STA PIN and Authorized MAC are empty, PBC is used. If Hide Access Point is enabled or Mac filter list is empty with "allow" chosen, WPS2 will be disabled. 3. WPS only supports WPA2, which means only when you select WPA2 encryption or Open, you can change WPS status. 136 Wireless AC1200 ADSL2+ Dual Band Modem Router WPS Setup Wi-Fi Protected Setup makes it easy for home users who know little of wireless security to establish a home network, as well as to add new devices to an existing network without entering long passphrases or configuring complicated settings. Simply enter a PIN code on the device web interface or press hardware WPS button (on the back panel of the device) and a secure wireless connection is established. WPS (hardware button): Press the hardware WPS button on the device for 1 second and the WPS LED will keep blinking for about 2 minutes. Within the 2 minutes, press the WPS button on your wireless computer or other device. When the WPS displays a solid light, the device has joined your wireless network. Device PIN: To use this option, you must know the PIN code from the wireless client and enter it in the corresponding field on your device while using the same PIN code on client side for such connection. Enable WPS: Check/uncheck to enable/disable the WPS function. It is disabled by default. Manual Setup AP You can manually set the network authentication method:

Select data encryption;

Specify whether a network key is required to authenticate to this wireless network;

Specify the encryption strength;

Click Apply/Save when done. 137 Wireless AC1200 ADSL2+ Dual Band Modem Router Network Authentication: Select Open, Shared, 802.1X, WPA-PSK, WPA2-PSK or Mixed WPA/ WPA2-PSK from the drop-down list to encrypt your wireless network. Depending on the type of network authentication you select, you will be prompted to enter corresponding settings. WEP Encryption: Select Enabled or Disabled. Encryption Strength: Select 128-bit or 64-bit. Current Network Key: Select a network key to be active. Network Key 1/2/3/4: Enter 13 ASCII characters or 26 hexadecimal digits for 128-bit encryption keys; enter 5 ASCII characters or 10 hexadecimal digits for 64-bit encryption keys. WPA/WAPI passphrase: Enter a WPA/WAPI network key. WPA Group Rekey Interval: Specify a key update interval. WPA/WAPI Encryption: Select AES or TKIP+AES. Apply/Save: Click it to apply the current configurations. 3.1.3 MAC Filter Click Wireless > 2.4G > MAC Filter to enter the page where you can configure the MAC filter of wireless network of 2.4GHz. The MAC-based Wireless Access Control feature can be used to allow or disallow clients to connect to your wireless network on the base of devices MAC address. 138 Wireless AC1200 ADSL2+ Dual Band Modem Router MAC Restrict ModeDisabled, Allow and Deny

Allow: Allow only PCs at specified MAC addresses (in the list) to connect to your wireless network. Deny: Block only PCs at specified MAC addresses from connecting to your wireless network. Disabled: Disable MAC filter feature. Add: Click to add a MAC address. Remove: To delete an existing MAC address, first check the Remove box next to the MAC address in list and then click this button. Example: To allow only the PC at the MAC address of 00:1A:3D:9C:BB:23 to connect to your wireless network, do as follows:

Select Allow.

Click the Apply/Save button.

Enter 00:1A:3D:9C:BB:23 in the MAC address box as shown in the figure below and click Apply/Save. 139 Wireless AC1200 ADSL2+ Dual Band Modem Router Note 1. If you select Allow MAC restrict mode and directly click Apply/Save instead of adding any MAC address to be filtered, WPS will be disabled (You can go to Wireless > Security to check WPS status). 2. If you want to change the MAC filter mode above from Allow to Deny, just select Deny and click Apply/Save. 3.1.4 Wireless Bridge Click Wireless > 2.4G > Wireless Bridge to enter the page where you can configure bridge settings. This page allows you to configure wireless bridge (also known as Wireless Distribution System) features of the wireless LAN interface. Wireless distribution system (WDS) is a system enabling the wireless interconnection of access points in an IEEE 802.11 network. It allows a wireless network to be expanded using multiple access points without the traditional requirement for a wired backbone to link them. AP Mode: You can select Wireless Bridge (also known as Wireless Distribution System) to disable access point 140 Wireless AC1200 ADSL2+ Dual Band Modem Router functionality. Selecting Access Point enables access point functionality. Wireless bridge functionality will still be available and wireless stations will be able to associate to the AP. Bridge Action: There are three options available: Enabled, Enabled (Scan) and Disabled. Select Disabled in Bridge Action which disables wireless bridge restriction. Any wireless bridge will be granted access. Selecting Enabled or Enabled (Scan) enables wireless bridge restriction. Only those bridges selected in Remote Bridges will be granted access. The Enabled (Scan) enables wireless bridge restriction and automatically scans the remote bridges. Remote Bridges MAC Address: Specify the MAC address of the remote bridge. If you select the Enabled (Scan) option in Bridge Restrict, system automatically scans the remote bridges and you only need to select those bridges and their MAC addresses will be added to automatically. Refresh: Click it to update the remote bridges. Wait for few seconds to update. Apply/Save: Click it to apply and save the settings. Note The WDS feature (aka. Wireless Bridge) can only be implemented between 2 WDS-capable wireless devices. Plus, SSID, channel, security settings and security key must be exactly the same on both such devices. 3.1.5 Station Info Click Wireless > 2.4G > Station Info to enter the page where displays authenticated wireless stations and their status. 3.2 5G 3.2.1 Basic Click Wireless > 5G > Basic to enter the page where you can configure the basic settings of the wireless network of 5GHz. 141 Wireless AC1200 ADSL2+ Dual Band Modem Router Enable Wireless: check/uncheck to enable/disable the wireless network of 5GHz. Hide Access Point: This option allows you to have your wireless network names (SSID) publicly broadcast or if you choose to enable it, the SSID will be hidden. SSID: Service Set Identifier. This is the name of your wireless network. Country: Select your country from the drop-down list. Channel: Select a channel or select Auto to let system automatically select one for your wireless network to operate on if you are unsure. The best selection is a channel that is the least used by neighboring networks. The default selection is Auto. Bandwidth: Select the bandwidth from the drop-down list. There are three selections provided, 20MHz, 40MHz and 80MHz. The default is 80MHz. Apply/Save: Click it to apply your current configurations. 3.2.2 Security Click Wireless > 5G > Security to enter the page where you can configure the security settings of wireless network of 5GHz. Note 1. To use the WPS security, the wireless client must be also WPS-capable. 2. When both STA PIN and Authorized MAC are empty, PBC is used. If Hide Access Point is enabled or Mac filter list is empty with "allow" chosen, WPS2 will be disabled. 3. WPS only supports WPA2, which means only when you select WPA2 encryption or Open, you can change WPS status. 142 Wireless AC1200 ADSL2+ Dual Band Modem Router WPS Setup Wi-Fi Protected Setup makes it easy for home users who know little of wireless security to establish a home network, as well as to add new devices to an existing network without entering long passphrases or configuring complicated settings. Simply enter a PIN code on the device web interface or press hardware WPS button (on the back panel of the device) and a secure wireless connection is established. 143 Wireless AC1200 ADSL2+ Dual Band Modem Router WPS (hardware button): Press the hardware WPS button on the device for 1 second and the WPS LED will keep blinking for about 2 minutes. Within the 2 minutes, press the WPS button on your wireless computer or other device. When the WPS displays a solid light, the device has joined your wireless network. Device PIN: To use this option, you must know the PIN code from the wireless client and enter it in the corresponding field on your device while using the same PIN code on client side for such connection. Enable WPS: Check/uncheck to enable/disable the WPS function. It is disabled by default. Manual Setup AP You can manually set the network authentication method:

Select data encryption;

Specify whether a network key is required to authenticate to this wireless network;

Specify the encryption strength;

Click Apply/Save when done. Network Authentication: Select Open, Shared, 802.1X, WPA-PSK, WPA2-PSK or Mixed WPA/ WPA2-PSK from the drop-down list to encrypt your wireless network. Depending on the type of network authentication you select, you will be prompted to enter corresponding settings. WEP Encryption: Select Enabled or Disabled. Encryption Strength: Select 128-bit or 64-bit. Current Network Key: Select a network key to be active. Network Key 1/2/3/4: Enter 13 ASCII characters or 26 hexadecimal digits for 128-bit encryption keys; enter 5 ASCII characters or 10 hexadecimal digits for 64-bit encryption keys. 144 Wireless AC1200 ADSL2+ Dual Band Modem Router WPA/WAPI passphrase: Enter a WPA/WAPI network key. WPA Group Rekey Interval: Specify a key update interval. WPA/WAPI Encryption: Select TKIP, AES, or TKIP+AES. Apply/Save: Click it to apply the current configurations. 3.2.3 MAC Filter Click Wireless > 5G > MAC Filter to enter the page where you can configure the MAC filter of wireless network of 5GHz. The MAC-based Wireless Access Control feature can be used to allow or disallow clients to connect to your wireless network. MAC Restrict ModeDisabled, Allow and Deny

Allow: Only allow PCs at specified MAC addresses (in the list) to connect to your wireless network. Deny: Block only PCs at specified MAC addresses from connecting to your wireless network. Disabled: Disable MAC filter feature.. Add: Click to add a MAC address. Remove: To delete an existing MAC address, first check the Remove box next to the MAC address in list and then click this button. Example: To allow only the PC at the MAC address of 00:1A:3D:9C:BB:23 to connect to your wireless network, do as follows:

Select Allow.

Click the Apply/Save button.

Enter 00:1A:3D:9C:BB:23 in the MAC address box as shown in the figure below.

Click Apply/Save. 145 Wireless AC1200 ADSL2+ Dual Band Modem Router Note 1. If you select Allow MAC restrict mode and directly click Apply/Save instead of adding any MAC address to be filtered, WPS will be disabled. 2. If you want to change the MAC filter mode above from Allow to Deny, just select Deny and click Apply/Save. 3.2.4 Wireless Bridge Click Wireless > 5G > Wireless Bridge to enter the page where you can configure bridge settings. This page allows you to configure wireless bridge (also known as Wireless Distribution System) features of the wireless LAN interface. Wireless distribution system (WDS) is a system enabling the wireless interconnection of access points in an IEEE 802.11 network. It allows a wireless network to be expanded using multiple access points without the traditional requirement for a wired backbone to link them. 146 Wireless AC1200 ADSL2+ Dual Band Modem Router AP Mode: You can select Wireless Bridge (also known as Wireless Distribution System) to disable access point functionality. Selecting Access Point enables access point functionality. Wireless bridge functionality will still be available and wireless stations will be able to associate to the AP. Bridge Action: There are three options available: Enabled, Enabled (Scan) and Disabled. Select Disabled in Bridge Action which disables wireless bridge restriction. Any wireless bridge will be granted access. Selecting Enabled or Enabled (Scan) enables wireless bridge restriction. Only those bridges selected in Remote Bridges will be granted access. The Enabled (Scan) enables wireless bridge restriction and automatically scans the remote bridges. Remote Bridges MAC Address: Specify the MAC address of the remote bridge. If you select the Enabled (Scan) option in Bridge Restrict, system automatically scans the remote bridges and you only need to select those bridges and their MAC addresses will be added to automatically. Refresh: Click it to update the remote bridges. Wait for few seconds to update. Apply/Save: Click it to apply and save the settings. Note The WDS feature (also known as Wireless Bridge) can only be implemented between 2 WDS-capable wireless devices. Plus, SSID, channel, security settings and security key must be exactly the same on both such devices. 3.2.5 Station Info Click Wireless > 5G > Station Info to enter the page where displays authenticated wireless stations and their status. 147 Wireless AC1200 ADSL2+ Dual Band Modem Router 4. Diagnostics 4.1 Diagnostics The modem router is capable of testing the connection to your DSL service provider, the connection to your Internet service provider and the connection to your local network. If a test displays a fail status, click "Rerun Diagnostic Tests"

at the bottom of this page to make sure the fail status is consistent. If the test continues to fail, click "Help" and follow the troubleshooting procedures. 4.2 Ping test Ping utility can help test your network whether the device has built a proper connection with your host. Type in the IP address of your host in the Ping IP Address field, and click Ping. 148 Wireless AC1200 ADSL2+ Dual Band Modem Router 5. Management 5.1 Settings 5.1.1 Backup Here you can save a copy of your devices configurations to your computer. Once you have configured the device, you can save these settings to a configuration file on your local hard drive. The configuration file can later be imported to your device in case the device is reset to factory default settings. To backup settings:

Click Backup Settings button.

Click Save on the popup dialog shown as below.

Specify a path to save the backup file, and then click Save. 149 Wireless AC1200 ADSL2+ Dual Band Modem Router Note The backup file is named as backupsettings and suffixed by .conf. For better memorizing, you can change the name, but do not change the file suffix. 5.1.2 Restore Backup Here you can restore the configuration from a file saved on your PC. To update the firmware:

Click Browse to locate and upload the updating firmware.

Click Update Settings. 150 Wireless AC1200 ADSL2+ Dual Band Modem Router 5.1.3 Restore Default Under some circumstances (for example, you cannot visit a website or unfortunately forget the login password), you may need to remove the existing configuration and restore the factory default settings. To restore the device to factory default:

Method 1: Click Restore Default Settings in above screen page. Method 2: Press the WPS/RST button on the back panel of the device for about 8 seconds when all LEDs light and then off. The device is reset. 5.2 System Log The System Log dialog allows you to view and configure the System Log. To view the System Log, firstly ensure log is enabled, otherwise you cannot view. 151 Wireless AC1200 ADSL2+ Dual Band Modem Router To configure the System Log, click Configure System Log. Log: If Enable is selected, the system will begin to log all the selected events. Log Level: All events above or equal to the selected level will be logged. Display Level: All logged events above or equal to the selected level will be displayed. Apply/Save: click to apply and save the system log settings. 5.3 SNMP Agent Simple Network Management Protocol (SNMP) allows a management application to retrieve statistics and status from the SNMP agent in this device. 152 Wireless AC1200 ADSL2+ Dual Band Modem Router To configure SNMP Agent:

Enable SNMP agent.

Configure the read operation command between SNMP management and SNMP agent. Read Community-SNMP agent allows SNMP management to read variable in MIB with read community.

Configure the read and write operation command between SNMP management and SNMP agent. Write Community-SNMP agent allows SNMP management to read and write variable in MIB with write community.

Configure the device name, network location and admin contact to make the device be conveniently managed by SNMP management.

Configure the IP address to which the SNMP agent sends a trap message.

Click Apply/Save.

After above configurations, click Management > Access Control > Accessctrl to enter the access control-service interface to enable SNMP service. 5.4 Internet Time This page is used to set the routers system time. If Automatically synchronize with Internet time servers is checked, the system will automatically connect to NTP server to synchronize the time. 153 Wireless AC1200 ADSL2+ Dual Band Modem Router Time Server: Internet time server domain. To configure Internet time:

Check Automatically synchronize with Internet time servers box.

Select a NTP time server from the drop-down list. If the NTP time server you are looking for is not included in the list, select Other and then enter it manually in the box.

Configure your time zone.

Click Apply/Save. 5.5 Access Control 5.5.1 Password The user name "admin" has unrestricted access to change and view configuration of your modem router. User Name: Enter the user name. Old Password: Enter the old password. New Password: Enter a new password of up to 16 characters. Confirm Password: Enter the new password again to confirm the new password. 154 Wireless AC1200 ADSL2+ Dual Band Modem Router Apply/Save: Click this button to save configurations. Note Password cannot contain a space. 5.5.2 Access Control - Service Here you can manage the device either from LAN or WAN side using HTTP, ICMP, TELNET, and SNMP. HTTP: Enabling the corresponding side (LAN/WAN) HTTP makes the device can be configured from the corresponding side (LAN/WAN) by a(n) admin/user/support. ICMP: Enabling the corresponding side (LAN/WAN) ICMP makes the devices connection can be diagnosed via ping IP address from the corresponding side (LAN/WAN). TELNET: Enabling the corresponding side (LAN/WAN) TELNET makes the user access the device via telnet from the corresponding side (LAN/WAN) and view the device details. Telnet is usually used to diagnose the device fault by users who know network knowledge. SNMP: Enabling the corresponding side (LAN/WAN) SNMP makes users manage the device via SNMP management client. This feature is usually used by network server or nerwork manager. Note 1. If you are not an advanced user, we suggest you keep the default settings. 2. To access the device from the LAN side, log in the device with LAN IP address of the device as "admin" or "user";

to access the device from the WAN side, you must use the WAN IP address and log in as "support". 5.6 Update Firmware Firmware upgrade is released periodically to improve the functionality of your device and add any new features. If you run into a problem with a specific feature of the device you could go to our website (www.tendacn.com) to download the latest firmware to update your device. 155 Wireless AC1200 ADSL2+ Dual Band Modem Router To update software, do as follows:

Download the latest firmware from our website: www.tendacn.com.

Click the "Browse" button to locate and upload the firmware file.

Click the "Update Software" button to start updating. Note The update process takes about 2 minutes to complete, and after that your modem router will reboot. 5.7 Reboot Click the Reboot button to reboot the modem router. 156 Wireless AC1200 ADSL2+ Dual Band Modem Router Appendix 1 Configure Your PC Screens to configure TCP/IP properties in other Operating Systems are similar to those below. Windows 8

Right click the icon on the bottom right corner of your desktop.

Click Open Network and Sharing Center.

Click Ethernet -> Properties.

Find and double click Internet Protocol Version 4(TCP/IPv4). 157 Wireless AC1200 ADSL2+ Dual Band Modem Router

Select Obtain an IP address automatically and Obtain DNS server address automatically and click OK.

Click OK on the Ethernet Properties window (see for the screenshot). 158 Wireless AC1200 ADSL2+ Dual Band Modem Router Windows 7

Click the icon

Click Open Network and Sharing Center. on the bottom right corner of your desktop. Tip on the bottom right corner of your desktop, follow steps below: Click Start -> Control If you cannot find the icon Panel -> Network and Internet -> Network and Sharing Center.

Click Local Area Connection -> Properties.

Find and double click Internet Protocol Version 4(TCP/IPv4). 159 Wireless AC1200 ADSL2+ Dual Band Modem Router

Select Obtain an IP address automatically and Obtain DNS server address automatically and click OK.

Click OK on the Local Area Connection Properties window (see for the screenshot). 160 Wireless AC1200 ADSL2+ Dual Band Modem Router Windows XP

Right click My Network Places on your desktop and select Properties.

Right click Local Area Connection and select Properties.

Scroll down to find and double click Internet Protocol (TCP/IP).

Select Obtain an IP address automatically and Obtain DNS server address automatically and click OK. 161 Wireless AC1200 ADSL2+ Dual Band Modem Router

Click OK on the Local Area Connection Properties window (see for the screenshot). MAC Click on the Apple icon from the top-left corner and select System Preferences.

162 Wireless AC1200 ADSL2+ Dual Band Modem Router

163 Wireless AC1200 ADSL2+ Dual Band Modem Router Appendix 2 WiFi Connection Windows 8

Click the icon on the bottom right corner of your desktop.

Select your wireless network from the list, click Connect and then follow onscreen instructions. Tip

, please move your mouse to the top right corner of your desktop, select Settings ->

1. If you cannot find the icon Control Panel -> Network and Internet -> Network and Sharing Center -> Change adapter settings, right click Wi-Fi and select Connect/Disconnect. 2. If you cannot find your wireless network from the list, ensure the Airplane Mode is not enabled on your PC.

When your wireless network is connected successfully, the following screen will appear. 164 Wireless AC1200 ADSL2+ Dual Band Modem Router Windows 7 1. Click the icon 2. Double click your SSID (wireless network name) and then follow onscreen instructions. on the bottom right corner of your desktop. 3. When your SSID (wireless network name) displays Connected as shown below, youve connected to it for Internet access successfully. 165 Wireless AC1200 ADSL2+ Dual Band Modem Router Windows XP 1. Right click My Network Places, and select Properties. 2. Right click Local Area Connection, and select View Available Wireless Networks from the pop-up submenu. 3. Select your wireless network from the list and then follow onscreen instructions. 166 Wireless AC1200 ADSL2+ Dual Band Modem Router 4. When your SSID (wireless network name) displays Connected as shown below, youve connected to it for Internet access successfully. MAC Click

> System Preferences. 167 Wireless AC1200 ADSL2+ Dual Band Modem Router

168 Wireless AC1200 ADSL2+ Dual Band Modem Router iPhone/iPad

169 Wireless AC1200 ADSL2+ Dual Band Modem Router

170 Wireless AC1200 ADSL2+ Dual Band Modem Router Appendix 3 FAQs 1. I cannot access the device's management interface. What should I do?

1) Verify the physical connection (namely, the Ethernet cable) between your PC and the device. For details, see Chapter 2 Hardware Install hereof. 2) Double check the TCP/IP settings on your PC. For details, see Appendix 1 Configure Your PC hereof. 3) Press the RST/WPS button on the device and then re-access the management interface. 4) Change the Ethernet cable that connects your PC and the device. 5) Try accessing device management interface from other PCs, smart phones or iPads. 6) Connect your PC alone to one of the LAN ports on the device. 2. I forget the wireless security key. What should I do? (How do I configure or change the security key?) Try the default security key, which can be seen from the label attached to the device bottom.

If the above works, access the device web manager and customize a new security key.

If the above does not work, press the RST/WPS button on the device to restore factory default settings. And then log in to the device web manager to customize a new security key. 3. My notebook is unable to search wireless networks, what should I do?

1) Verify that wireless service is enabled on your notebook by checking the wireless hardware or software button on your notebook. The hardware button is usually located on the side of your notebook. Note that some notebooks may not have such hardware button. Software button can be implemented by pressing Fn+

. Fn is situated on the bottom left corner of your keyboard, may be any key between F1-F12 depending on what type of keyboard you are using. 2) Log in to the device, select Wireless > 2.4G/5G > Basic and change the wireless network name (SSID). Then search again. Follow below steps to verify that wireless service is enabled on your notebook (for Windows XP OS only). From the desktop, right click on the My Computer icon and select Manage. Select Services and Applications, double click Services and view the status of Wireless Zero Configuration. If Status dose not display Started, right click the Wireless Zero Configuration and select Start; if Startup Type displays Disabled, right click the Wireless Zero Configuration, select Properties; from the Startup Type drop-down list box, select Automatic and then click Start in Service Status. 4. Why cannot I connect to the searched wireless network?

1) Verify that you entered a correct security key. 171 Wireless AC1200 ADSL2+ Dual Band Modem Router 2) Log in to the device, select Wireless > 2.4G/5G > Basic and change the wireless network name (SSID). Then connect again. 3) Log in to the device, select Wireless > 2.4G/5G > Security and change the security settings. Then connect again. 5. Where should I place the wireless device for optimum performance?

1) Know that multiple floors and walls will reduce the signal strength of Wi-Fi equipment, and that metal framing, ultraviolet-resistant window film and even metallic paint also reduce the signal strength. 2) Position the device in a central location within the area to be used for wireless communications. 3) Position the wireless router away from other radio equipment that operates at a frequency of 2.4GHz such as cordless phones, remote control receivers for R/C hobbyist, wireless cameras, and microwave ovens, cordless telephones and microwave ovens which are also considered to be electromagnetic devices. 172 Wireless AC1200 ADSL2+ Dual Band Modem Router Appendix 4 VPI/VCI List The following table lists common ISPs and their VPI and VCI numbers. If you cannot locate your ISP and their VPI and VCI information here, ask your ISP to provide it. Country Australia Australia Australia Australia Australia Australia Australia Australia Australia Australia Australia Australia Australia Australia Australia Australia Argentina Argentina Argentina Belgium Belgium Belgium Belgium Bolivia Brazil Brazil ISP Telstra GoldenIT Telstra Bigpond OptusNET AAPT ADSL Direct Ausie Broadband Australia On Line Connexus Dodo Gotalk Internode iPrimus Netspace Southern Cross Telco TPG Internet Telecom Telefonica ADSL Office Turboline Turboline ADSL Office Brasil Telcom Telefonica VPI VCI Encapsulation 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 33 35 33 35 35 35 35 34 35 35 PPPoA LLC _PPPOA_VCMUX PPPoE_LLC PPPoE_VCMUX PPPoE_VCMUX PPPoE_LLC PPPoE_LLC PPPoA_VCMUX PPPoE_LLC PPPoE_LLC PPPoE_VCMUX PPPoE_VCMUX PPPoA_VCMUX PPPoE_VCMUX PPPoE_LLC PPPoE_LLC PPPoE LLC PPPoE LLC PPPoA VC-MUX 1483 Routed IP LLC PPPoA LLC 1483 Bridged IP LLC 1483 Bridged IP LLC 1483 Routed IP LLC PPPoE LLC PPPoE LLC 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 0 8 1 8 8 8 8 0 0 8 173 Wireless AC1200 ADSL2+ Dual Band Modem Router Brazil Brazil Canada Canada Canada Canada Canada Canada Canada Canada Canada Canada Colombia Columbia Costa Rica Czech Republic Telmar South Region Primus Canada Rogers Canada (1) Rogers Canada (2) Rogers Canada (3) BellSouth(1) Canada BellSouth(2) Canada Sprint (1) Canada Sprint (2) Canada Verizon (1) Canada Verizon (2) Canada EMCALI ETB ICE Denmark Cybercity, Tiscali Dominican Republic Dubai Egypt:

Egypt:

Finland Finland Finland Finland France France (1) France (2) France (3) Germany TE-data Linkdsl Vodafone Saunalahti Elisa DNA Sonera Free Orange SFR 33 32 35 35 35 35 35 35 35 35 35 35 33 33 50 48 35 33 50 35 35 35 100 100 100 35 36 35 67 35 32 PPPoE LLC PPPoE LLC PPPoE LLC PPPoE LLC 1483 Bridged IP LLC 1484 Bridged IP LLC PPPoE LLC PPPoE LLC PPPoA LLC PPPoE LLC PPPoE LLC 1483 Bridged IP LLC PPPoA VC-MUX PPPoE LLC 1483 Routed IP LLC 1483 Bridged IP LLC PPPoA VC-MUX 1483 Bridged IP LLC 1483 Bridged IP LLC 1483 Bridged IP LLC 1483 Bridged IP LLC 1483 Bridged IP LLC 1483 Bridged IP LLC 1483 Bridged IP LLC 1483 Bridged IP LLC 1483 Bridged IP LLC LLC PPPoE LLC PPPoE LLC PPPoA VC-MUX PPPoE LLC 0 1 0 0 8 0 8 0 0 8 0 0 0 0 1 8 0 0 0 0 0 8 0 0 0 0 8 8 8 8 1 174 Wireless AC1200 ADSL2+ Dual Band Modem Router Hungary Iceland Iceland India India India India India India Indonesia Speedy Telkomnet Iran Iran Iran Iran Iran Iran Iran Iran Iran Iran Iran Iran Iran Iran (1) Iran (2) Iran Israel Israel(1) Sci-Network Islandssimi Siminn Airtel BSNL MTNL RELIANCE COMMUNICATION TATA INDICOM CONNECT

[Shatel]

Aria-Rasaneh-Tadbir Asia-Tech Pars-Online (Tehran) Pars-Online (Provinces)

[Saba-Net]

Neda-Gostar-Saba Pishgaman-Tose Fan-Ava Datak Laser (General) Laser (Privates) Asr-Enteghal-Dadeha Kara-Amin-Ertebat ITC Dadegostar Asre Novin 0 0 8 1 0 0 0 0 1 8 0 0 0 0 0 0 8 0 0 0 8 0 0 0 8 0 8 8 175 35 35 48 32 35 35 35 32 32 81 35 35 35 59 35 35 35 35 35 32 35 33 35 35 81 33 35 48 PPPoE LLC PPPoA VC-MUX PPPoA VC-MUX 1483 Bridged IP LLC 1483 Bridged IP LLC 1483 Bridged IP LLC PPPoE LLC PPPoE LLC PPPoE LLC PPPoE LLC PPPoE LLC PPPoE LLC PPPoE LLC PPPoE LLC PPPoE LLC PPPoE LLC PPPoE LLC PPPoE LLC PPPoE LLC PPPoE LLC PPPoE LLC PPPoE LLC PPPoE LLC PPPoE LLC PPPoE LLC PPPoE LLC PPPoA VC-MUX PPPoA VC-MUX Wireless AC1200 ADSL2+ Dual Band Modem Router Italy Italy Jamaica (1) Jamaica (2) Jamaica (3) Jamaica (4) Kazakhstan Kazakhstan kuwait unitednetwork Malaysia Malaysia Mexico Mexico Mexico Mexico morocco Netherlands Netherlands Netherlands Netherlands New Zealand New Zealand Kazakhtelecom Megaline Streamyx Telmex (1) Telmex (2) Telmex (3) Telmex (4) IAM BBNED MXSTREAM BBNED MX Stream Xtra Slingshot Orange Nyumbani

(Kenya) Pakistan (PALESTINE) Pakistan for PTCL Pakistan (cyber net) Pakistan (linkDotnet) Pakistan(PTCL) Philippines(1) Philippines(2) 35 35 35 35 35 35 40 33 33 35 35 81 35 81 35 35 35 48 35 48 35 1483 Bridged IP LLC PPPoA VC-MUX PPPoA VC-MUX PPPoA VC-MUX 1483 Bridged IP LLC SNAP 1483 Bridged IP LLC SNAP LLC/SNAP Bridging PPPoA VC-MUX 1483 Bridged IP LLC PPPoE LLC PPPoE LLC PPPoE LLC PPPoE LLC PPPoE LLC PPPoE LLC PPPoE PPPoA VC-MUX 1483 Bridged IP LLC 1483 Bridged IP LLC PPPoA VC-MUX PPPoA VC-MUX 100 PPPoA VC-MUX 35 35 PPPoE LLC 1483 Bridged IP LLC 103 1483 Bridged IP LLC 35 35 81 35 PPPoE LLC PPPoA LLC PPPoE LLc 1483 Bridged IP LLC 100 1483 Bridged IP LLC 8 8 8 0 8 0 0 0 0 0 0 8 8 0 0 8 0 8 0 8 0 0 0 8 0 8 0 8 0 0 176 Wireless AC1200 ADSL2+ Dual Band Modem Router Portugal Puerto Rico Coqui.net RomTelecom Romania:

Russia Russia Russia Saudi Arabia (1) Saudi Arabia (2) Saudi Arabia (3) Saudi Arabia (4) Saudi Arabia (5) Saudi Arabia (6) Spain Spain Spain Spain Spain Spain Spain Spain Spain Spain Spain Spain Spain Spain Spain Spain Spain Spain Rostel Port telecom VNTC Arrakis Auna Comunitel Eresmas Jazztel Jazztel ADSL2+

Desagregado OpenforYou Tele2 Telefnica (Espaa) Albura, Tiscali Colt Telecom, Ola Internet EresMas, Retevision Telefonica (1) Telefonica (2), Terra Wanadoo (1) Wanadoo (2) Terra Terra 35 35 35 35 35 35 33 35 33 33 35 35 35 35 33 35 35 35 32 35 32 32 35 35 32 32 35 32 32 32 PPPoE LLC PPPoA LLC 1483 Bridged IP LLC PPPoE LLC PPPoE LLC PPPoE LLC PPPoE LLC PPPoE LLC 1483 Bridged IP LLC 1483 Routed IP LLC 1483 Bridged IP LLC 1483 Routed IP LLC 1483 Bridged IP VC-MUX 1483 Bridged IP VC-MUX 1483 Bridged IP VC-MUX 1483 Bridged IP VC-MUX IPOE VC-MUX 1483 Bridged IP LLC-BRIDGING 1483 Bridged IP VC-MUX 1483 Bridged IP VC-MUX 1483 Bridged IP LLC/SNAP PPPoA VC-MUX PPPoA VC-MUX PPPoA VC-MUX PPPoE LLC 1483 Routed IP LLC PPPoA VC-MUX PPPoE LLC 1483 Bridged IP LLC/SNAP 1483 Bridged IP LLC/SNAP 0 0 0 0 0 8 0 0 0 0 0 0 0 8 0 8 8 8 8 8 8 1 0 8 8 8 8 8 8 8 177 Wireless AC1200 ADSL2+ Dual Band Modem Router Spain Spain Spain Spain Spain Spain Spain Uni2 Orange Orange 20 Megas Orange Ya.com Ya.com Wanadoo (3) SpainWanadoo Sri Lanka Telecom-(SLT) Sweden Sweden Switzerland Switzerland Telefnica (Argentina) Telefnica (Per) Thailand Thailand Thailand Thailand Thailand Telenordia Telia TRUE TOT 3BB Cat Telecom BuddyBB Trinidad & Tobago TSTT Turkey (1) Turkey (2) UAE (Al sahmil) United States United States United States United States United States United States 4DV.Net All Tel (1) All Tel (2) Ameritech AT&T (1) AT&T (2) 33 35 35 32 32 32 32 32 35 35 35 35 35 35 48 1483 Bridged IP VC-MUX 1483 Bridged IP VC-MUX LLC-BRIDGING 1483 Bridged IP LLC/SNAP 1483 Bridged IP VC - MUX 1483 Bridged IP LLC/SNAP 1483 Routed IP LLC 1483 Bridged IP LLC PPPOE LLC PPPoE 1483 Routed IP LLC 1483 Bridged IP LLC PPPoE LLC 1483 Bridged IP LLC-based 1483 Bridged IP VC-MUX 100 PPPoE LLC 32 33 35 35 35 35 35 50 32 35 35 35 35 35 PPPoE LLC PPPoE LLC PPPoE LLC PPPoE LLC PPPoA VC-MUX PPPoE LLC PPPoA VC-MUX 1483 Bridged IP LLC PPPoA VC-MUX PPPoE LLC 1483 Bridged IP LLC PPPoA LLC PPPoE LLC 1483 Bridged IP LLC 1 8 8 8 8 8 8 8 8 8 8 8 8 8 8 0 1 0 0 0 0 8 8 0 0 0 0 8 0 8 178 Wireless AC1200 ADSL2+ Dual Band Modem Router United States United States United States United States United States United States United States United States United States United States United States United States United States United States United States United States United States United States United States United States United States United States United States United States United States United States United States United States United States United States AT&T (3) August.net (1) August.net (2) BellSouth Casstle.Net CenturyTel (1) CenturyTel (2) Coqui.net Covad Earthlink (1) Earthlink (2) Earthlink (3) Earthlink (4) Eastex Embarq Frontier Grande ommunications GWI Hotwire Internet Junction PVT QWest (1) QWest (2) QWest (3) QWest (4) SBC (1) SBC (2) SBC (3) Sonic SouthWestern Bell United States Sprint (1) 35 35 35 35 96 35 35 35 35 35 35 35 32 1483 Bridged IP LLC 1483 Bridged IP LLC 1483 Bridged IP LLC PPPoE LLC 1483 Bridged IP LLC PPPoE LLC 1483 Bridged IP LLC PPPoA LLC PPPoE LLC PPPoE LLC PPPoE LLC PPPoE VC-MUX PPPoA LLC 100 PPPoA LLC 35 35 34 35 35 35 35 32 32 32 32 35 35 35 35 35 35 1483 Bridged IP LLC PPPoE LLC PPPoE LLC 1483 Bridged IP LLC 1483 Bridged IP LLC 1484 Bridged IP LLC 1485 Bridged IP LLC PPPoALLC PPPoA VC-MUX 1483 Bridged IP LLC PPPoE LLC PPPoE LLC 1483 Bridged IP LLC 1483 Bridged IP LLC 1484 Bridged IP LLC 1483 Bridged IP LLC PPPoALLC 0 0 8 8 0 8 8 0 0 0 8 8 0 0 8 0 1 0 0 0 0 0 0 0 0 0 0 8 0 0 0 179 Wireless AC1200 ADSL2+ Dual Band Modem Router United States United States United States United States United States United States United States United States United States United States United States United States United Kingdom (1) United Kingdom (2) United Kingdom United Kingdom UK Uzbekistan Uzbekistan Uzbekistan Venezuela Vietnam Vietnam Vietnam Vietnam Sprint (2) Sprint Territory SureWest Communications(1) SureWest Communications(2) SureWest Communications(3) Toast.Net Uniserv US West Verizon (1) Verizon (2) Windstream Verizon (2) AOL Karoo Sharq Stream Sarkor TShTT CANTV VDC Viettel FPT 35 35 34 PPPoE LLC PPPoE LLC 1483 Bridged LLC Snap 32 PPPoE LLC 32 35 33 32 35 35 35 35 38 38 38 50 38 35 33 35 33 35 35 35 33 PPPoA LLC PPPoE LLC 1483 Bridged IP LLC PPPoA VC-MUX PPPoE LLC 1483 Bridged IP LLC PPPoE LLC 1483 Bridged IP LLC PPPoA VC-MUX PPPoE LLC PPPoE VC-MUX PPPoA LLC 1483 Bridged IP LLC PPPoE LLC PPPoE LLC PPPoE LLC 1483 Routed IP LLC PPPoE LLC PPPoE LLC PPPoE LLC PPPoE LLC 8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 8 0 0 0 0 8 8 0 180 Wireless AC1200 ADSL2+ Dual Band Modem Router Appendix 5 Regulatory Compliance Information CE Mark Warning This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. This device complies with EU 1999/5/EC. NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. (2) To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 181 Wireless AC1200 ADSL2+ Dual Band Modem Router NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. (2) To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable.

*Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only. 182

Comments

This product uses the FCC Data API but is not endorsed or certified by the FCC