N80 Wireless N900 Concurrent Dual-Band Gigabit Router Users Manual

Hardware Install A Follow below diagram to connect your devices B Follow below diagram to connect your devices If youare using aDSL modem for Internet access. If you are not using a DSL modem for Internet access. a. Connect the telephone line from your ISP side to the modem and then a. Connect the Ethernet cable from your ISP side to the WAN port on the router. connect the modem to the WAN port on the router using an Ethernet cable. b. Connect one of the LAN ports 1-3 on the router to your PC using another b. Connect one of the LAN ports 1-3 on the router to your PC using another Ethernet cable. Ethernet cable. c. Make sure you have connected all devices the way shown in below diagram. c. Make sure you have connected all devices the way shown in below diagram. Telephone Line jinn. internet Power Outlet Qa Telephone Ethernet Cable Telephone Line Ethernet Cable Ethernet Cable INDE Ecotec ae aCe eh tered

( Power/SysLED Blinks while system is functioning correctly. & WANLED A Solid light: Corresponding WAN port is soe : a correctly connected WPS LE :

Vw SLED Bho king: Ferforming WPS authentication ona Blinking: Transmitting data. Off: WPS function is currently inoperative or Off: Ethernet cable unplugged. authentication completed. <> USBLED A Solid light: USB port is correctly connected 2 A Solid light: Wireless is activated. Off: No USB device attached. Blinking: Transmitting data wirelessly over 5GHz. LAN/1/2/3 LED A Solid light: Corresponding LAN port is Off: Wireless is deactivated. correctly connected Blinking: Transmitting data. Off: Ethernet cable unplugged. 2, 2.4G LED A Solid light: Wireless is activated. Blinking: Transmitting data wirelessly over 2.4GHz. Off: Wireless is deactivated. oO IPTV LED A Solid light: Corresponding IPTV port is correctly connected Blinking: Transmitting data. Off: Ethernet cable unplugged. Config TCP/IP Settings If you're using Windows 7, do as follows:

A Right click onNetwork and B Click "Change adapter settings". C Right click "Local Area Select "Internet E Select "Obtain an IP choose Properties. Connection"and select Protocol Version address automatically"

Or click onStart-> "Properties". 4(TCP/IPv4)" and then click Ok.

"Control panel-> and click Then you will go back Network and internet-> "Properties". to the step D.

"Network and sharing center Please click on Okin that page to save the settings completely.

[I erm nent Memon sneacene slimes}

| oak RTLSIOFomiy Fhe

Open Map network drive... Disconnect network drive... Create shortcut . aa Poet eae

[Properties | Cj amt) Config TCP/IP Settings A siogrsenneteeees B sesuang pice non cntaue If you're using MAC OS, do as follows:

UP crcntmresioprene tamer. Rasta) (Rew) Aviv) Internet Connection Setup The device's default LAN IP is 192.168.0.1. You can change it according to your own needs. This Quick Install Guide uses the default for demonstration purpose. A Log in to device's Web utility B Enter admin (factory default) in both user C You shall come to below screen. This page is about D After you configured required settings Launch a web browser, in the address name and password fields on login window your internet type. If you have got an account and click"OK" and go to Status interface to bar input 192.168.0.1 and press Enter. and clickLogin. password from your internet service provider( your view WAN connection status. You can cable company), please choose PPPOE and type start accessing Internet when the information correctly. If you got nothing, please "Connected" is displayed. choose DHCP, If you are using other types, please click onAdvanced Connect to Device Wirelessly If you are using Windows 7 or Vista, do as follows. Make sure you have enabled the B Select the wireless network you want to connect to and click Connect (The device's default When you see Connected displayed wireless adapter on your PC. SSID is: Tenda_xxxxxx where xxxxxx stands for the last six characters in the devices MAC address. next to the wireless network you selected, Click wireless network icon at the You can find the MAC address in the label attached to the device's back panel). If you have encrypted it means you have connected to the right bottom of your desktop. the network,please input the password correctly in that pop-up and then connect to it. If the network wireless network successfully. is unencrypted as the below picture, just click on "Connect"and you will connect to it directly. Not connected 6 |] Currently connectedto:&>

r Fenda %900xx Connections are available No intemet access Wireless Network Connection Wireless Network Connection9 Tend 200008 aul Fenda xxxxxX Connected HHH

> right be visible to athens >

Connect automatically >

Open Network and Sharing Center Open Network and Sharing Genter If youre using Windows XP, do as follows:

A Make sure you have enabled the wireless B Select the wireless network you want to connect to and click Connect (The device's C When you see Connected displayed next to the adapter on your PC. ClickStart-Control Panel- default SSID is: Tenda_xxxxxx where xxxxxx stands for the last six characters in the wireless network you selected, it means you have Network and Internet Connections-Network devices MAC address. You can find the MAC address in the label attached to the device's connected to the wireless network successfully. Connections and right click Wireless Network back panel). If you have encrypted the network, please input the password correctly in Connection icon and select View Available that pop-up and then connect to it. If the network is unencrypted as the below picture, Wireless Networks. just click on "Connect" and you will connect to it directly. Disable "Network Tasks Choose a wireless network I View Available Wireless Networks|

(ig) Terea- 20000 Status Unsecured wirel Repair Bridge Connections Create Shortcut Delete Rename Properties