VVDI Key Tool User manual part 1

 

nor se KEY TOOL USER MANUAL TABLE OF CONTENTS 1) Safty Precautions And Warnings -------------------7--- 02 2 ) Product Packaging Checklist -------------------------------- 02 3) Overview 3.1 Schematic ----------------2-2-22eeceeec cece eee e eee e eerste: 03 3.2 Characteristics -------------2--2---22: eee eec esse eset eeeeeees 05 3.3 Specifications ----------------------++22ssss22eeeeseeseeseee 05 4) General Information ..........22..22...2:.22:0000eeeeeeees 05 5 ) Operating Introductions 5.1 Main Interface ------------2---+2s---eeeeeeeeeeeeteeeee terete 06 5.2 Transponder Cloning -----------------------------e-2 07 5.3 Transponder Generating ------------------------- 11 5.4 Remote Cloning +--+. erre reer 12 5.5 Remote Generating oe 14 5.6 Garage Remote Generating ------------7-s--rr 16 5.7 Remote Renew ------------22e0ceeeereeeeeeeeeeeeree eee: 16 5.8 Frequency Test -------------++---++-e-+eeereeeeeeeeeeencee ees 17 5.9 Special FUNCtIONS -------------- errr reer nen 17 6) FAQ, ssssneesseennecneneseneeenesmeermurntnesenncenncsenas 18 SAFTY PRECAUTIONS AND WARNINGS To prevent personal injury or device damage, users should carefully observe the instructions provided by this operation manual and adopt the following safety precautions:

Always operate the tool under the safe condition Do not place the tool in any wet, oily, dusty area Do not place any tool or container on the tool Please use this tool with local legal permission PRODUCT PACKAGING CHECKLIST The whole package covers the following items, if missing, please contact your dealer. Nel nates Quantity Description VVDI KEY TOOL 1 device B5 Remote 5 Xhorse wire universal type Remote programming cable 2 programming Xhorse wire remote Remote renew cable 1 renew smart key Transponder collection box 2 place for chip User Manual 1 OVERVIEW TOOL SCHEMATIC 2) Ignition data acquisition

& Signal testing

(3) Frequency & Power testing

(@ Transponder detection area (5) Power on/off

(4) LCD Screen @ IR Tester Cancel VVODI Key Tool ) OK q Direction

(0 USB Power charge port \ (on (1) Remote Programming port

CHARACTERISTICS

* Built-in more than 1200 types of vehicle remote database

( More vehicle types will be supported continuously )

- Support varieties of offline transponder cloning

* Built-in hundreds of key renew database

- Support most HCS rolling code and fixed code remote cloning

- Support partial NonHCS rolling code remote cloning

* Perfect testing function of frequency, power, IR and Ignition coil signal

- Large capacity lithium battery ensures super long working time

- Bounes points reward system SPECIFICATIONS LCD size 2.4 Display 240X320 Battery voltage 3.6~4.2V Battery capacity >2500mAh Charge voltage 45~6.5V Charge current <1000mA Working time 210 Hour GENERAL INFORMATION 1. The descriptions, Illustrations and specifications given in the pamphiet are subject to alteration without notice. 2. Under the usage of instruction sheet, The warranty time is three years. 3, Even if within the warranty period, If the following occurs, Certain maintenance costs will not be free:

* The product malfunction caused by not in accordance with the user manual operation

* The malfunction and damage caused by unauthorized repairs and alteration

+ The product malfunction caused by the fall, crash and the improperly voltage Damage due to force majeure

[ RIGHTS RESERVED ] No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, or by any means (mechanical, electronic, photocopying, recording, or others), without permission of Xhorse. Due to continuous product improvement, the information contained in this manual is subject to change without notice. OPERATING INSTRUCTIONS The operation instructions describe the basic operating procedures and precautions of each function, at the same time listed some common problems encountered during using this function. Please read operating instructions section carefully before your work. 1, MAIN INTERFACE Status bar CD] a qc

22s (|| ) | S|. 2, TRANSPONDER CLONING Support identification all immobile Transponder in current market, clone &

edit partial common Transponder.

* Support editing transponder types 36/46(Hitag2), 47(Hitag3). 48. 4D(40/80), 7935

+ Support cloning transponder types Support 36/46 original or aftermarket transponder offline cloning Support 4D-40 bit 60 63 83 67 69, etc offline cloning Support 11/12/13/4c/30/33/42 offline cloning Support Toyota 72-G transponder online cloning Support Hyundai/KIA 70(4D-80) bit online cloning Support Ford 83-80 bit online cloning Support all 48 online cloning

* Support unlocking transponder type Support unlocking Xhorse special 4D, 46 transponder Support unlocking all 7935 locked transponder 12 FEROS , (OK RIRBI After enter transponder cloning function, Please put transponder on transponder detection area and press [ok] to identification, The identification result will be showed as picture 2.2 Picture 2.1 Transponder identification diagram Loy ec a AGnSF, ( HITAG2 ) 1D:0671CE69 _|_ Characteristic data Dea Sa | Configuration mode Gite 79538RER ; Transponder status ae Transponder type

#2 (y) 8220 =) is Whether support cloning and editing Control direction for next operation Picture 2.2 Identification result rae b a5 4F4EEC4s4B52 S27 Dex Sane PO: CA25B17E Pi: FFFFFFFF P2: FFFFFFFF P3: FFFFFFFF P4: FFFFFFFF PS: FFFFFFFF confirm. P6: FFFFFFFF P7: FFFFFFFF Press (>) for transponder editing

- Use direction buttons to move cursor or revise editing content, Click on [OK] to dd dn dd ddd dnd pda ee Picture 2.3 Transponder editing diagram Cover wu LITO) aes ete HRSA eS eK le, R[OK] REHEARSE. Press () for transponder cloning

- Partial transponder cloning need to Ignition data acquisition first, other types no need to sniffer data, press [OK] to start sniffer data. Picture 2.4 Ignition data acquisition