M99 WIRELESS MONO HEADSET 15 M99+ UserMan-US Users Manual

 

Mono Bluetooth Headset M99+

User Manual Contents:

1. Product Overview ------------------------------------------------------------------- 1 2. Basic Operation --------------------------------------------------------------------- 2 3. Bluetooth Pairing and Connection -------------------------------------------- 3 4. Connection with Two devices ----------------------------------------------------- 4 5. LED Indicator

----------------------------------------------------------------------- 5 6. Charging ------------------------------------------------------------------------------ 6 7. TTS Tone ------------------------------------------------------------------------------ 7 8. Product Specification ------------------------------------------------------------- 8 9. Attentions and Q & A --------------------------------------------------------------- 9 1. Product Overview:

Volume +

Volume -

LED Indicator MFB (Multi Function Button) Digital Microphone Mute Button Micro USB Charge Port Package Contents A. Bluetooth Headset M99+ x 1 B. Micro USB charging cable x 1 C. User manual x 1 2. Basic Operation:

Button Function Power on Power off Enter mode pairing noise Play / Pause Redial a call Voice dialing Voice assistant Call reduction Answer a call Hang up a call Reject a call Volume Up Next Song Volume Down Previous Song MFB Volume +

Volume +

Operation Instruction In off status, long press 2 seconds MFB to power on.

*If there is no pair record, power on will enter pairing mode automatically. If there is pair record, power on will enter reconnecting mode automatically, if it can not reconnect any device for over 20 seconds, it will enter pairing mode automatically. The actual reconnect time base on the pair record. In on status, long press 3 seconds to power off. In off status, long press 3-4 seconds to enter pairing mode. Or under unconnected standby mode, short press the MFB to enter pairing mode. Short press when play music. Double press MFB to dial the last call. Long press 1 second MFB then release. Long press 1-2 seconds MFB with Do tone and activate. Power on will activate the function automatically. Short press (when call coming). Short press (during a call). Long press 1 second (when call coming). Short press. Long press for 1 seconds. Short press. Long press for 1 seconds. 3. Bluetooth Pairing and Connection:

A. In off status, long press MFB 3-4 seconds to enter pairing mode with LED Blue & Red flash alternately. B. Search and click to connect TaoTronics M99+ on your phone Bluetooth lists, LED change to Blue slow flash after connected, now you can play music from phone to headphone. C. You can press MFB/ volume+ / volume- on the Bluetooth headset to control the answer/hang up a call and play/pause of the music, next and previous songs, volume up and down. Pairing Connection Long press MFB 3-4 seconds to enter pairing mode with LED Blue & Red alternately flash. Search and click to connect TaoTronics TT-

BH041 on your phone Bluetooth lists. 4. Connection with Two devices:

A. Follow part 3 to connect with first phone, then turn off the Bluetooth function of first phone. B. Long press MFB 3-4 seconds to pairing mode again with Red & Blue LED flash alternately. C. Search and click to connect TaoTronics M99+ on your second phone Bluetooth lists, LED change to Blue LED low flash after connected. D. Turn on Bluetooth function of first phone, click to reconnect TaoTronics TT-BH041 on Bluetooth lists. Headset is connected with two phones now.

* Music only can be played from one phone under two connections, when you want to play music from another phone, you need to pause or close the music of the previous phone. The same operation during talking status. 5. LED Indicator Mode Power on Power off LED Indicator LED Blue flash 2 times LED Red flash 2 times Pairing mode LED Red & Blue flash alternately Unconnected standby mode Connected standby mode LED Blue flash twice every 5 seconds LED Blue flash once every 10 seconds Playing Music Talking LED Blue flash once every 10 seconds LED Blue flash once every 10 seconds Delete paired record Blue and Red LED flash once at the same time Charging Full charged Low battery Solid LED Red LED Red turn off Red LED flash 6. Charging Please charge the M99+ at once when the Red LED flash. Charging time is about 2 hours. Solid LED Red change to Solid LED Blue when full charged. Charge Connections Please connect to the M99+ charging port through the Micro USB charging cable, the charger can be used as car charger, travel charger, computer USB, etc. Charging with Charger Charging with PC Note:

1. Pls charge the M99+ at least one time every 2 months when dont use it. 2. In power on, it is normal that charging indicator will cover bluetooth indicator while charging. 7. TTS Tone Status Power on Enter pairing mode Pair success Tone Power on Pairing Paired Bluetooth connect success Bluetooth disconnect Your headset is connected Your headset is disconnected Power off Power off 8. Product Specification:

Bluetooth Version Bluetooth Chipset Operation Range Bluetooth Protocols CODEC Code Battery Capacity Charging Time Stand-by Time Working Time Headset Net Weight Headset Dimension V5.0 QCC3020 10 meters HSP, HFP, AVRCP, A2DP SBC, AAC 400mAh/3.7V 2 hours 400 hours About 34 hours (50% volume) 78.8g 163.7*160.78*61.6mm

*Actual use time will differ from environment and music 8. Attentions and Q & A:

A. How to reconnect and operation when failed to reconnect ?

When M99+ connected with your mobile phone successfully at the first time, it will search and reconnect the paired device automatically when power on, If failed, please pair and connect again. The headset can reconnect in 10 minutes, if over 10 minutes will power off automatically, disconnect in long distance will notice Your headset is disconnected. B. How to delete paired records?

In power on state, long press the volume+,volume-,MFB for 5 seconds to clear the pairing record. The indicator Blue and Red LED flash once at the same time that means the pairing record has been cleared, and the M99+ will not connect the connected device. When there are various connection problem, try clearing the pairing record firstly. C. Whats the password for pairing?

Some connection devices require password for pairing, pls try 0000 or 8888 or 1111 or 1234. D. What devices could charge for the headphone?

Any car charger, power bank, PC etc which meet DC 5V , charging current more than 500mA could be charge for this item. E. How to do if can not power on or connection problem?

Please try to reset the headphone, long press MFB and plug charging cable, it will reset to power off, then power on to use. F. Why power off automatically?

No connection for over 10 minutes or battery voltage is less than 3.1V. G. Three-way calling function operation Call coming during call, short press the MFB to answer the new call and hang up the current call;

Call coming during call, double press the MFB to answer the new call and keep the current call;

Call with a new call coming, long press the MFB for 2 seconds rejecting the new call. When you are during a three-party call, double press the MFB to switch audio between the current call and the keep call. FCC STATEMENT :

This device may not cause harmful interference, and This device must accept any interference received, including interference that This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)

(2) may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF warning statement:

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.