Installation Description IRF302U shall be installed in various kinds of Sony products. When IRF302U is installed in a product, we shall consider the following points;
1. Since IRF302U owns its FCC ID number, we shall affix an exterior label on the outside of the product if the FCC ID is not visible. The exterior label shall use wording such as either Contains Transmitter Module FCC ID: AK8IRF302U or Contains FCC ID: AK8IRF302U . 2. IRF302U complies with requirements of sub-sections 15.203, 15.205, 15.207, 15.247 and 15.407 in FCC Rules Part 15. We shall install IRF302U in accordance with their requirements. IRF302U complies with requirements of the sub-section 2.1091. When installers install IRF302U into a product, they shall ensure that the public is not exposed to radio frequency energy levels in excess of the Commissions guidelines in accordance with the sub-section 15.247(b)(5) and 15.407(f) in FCC Rules Part 15. 3. Special Accessory (Shielded tape and Ferrite Core) must be patched for RF inference. Please refer to the following picture. 4. This equipment complies with FCC radiation exposure limits set forth for at uncontrolled equipment. This equipment should be installed and operated with minimum distance at least 20cm between the radiator and persons body (excluding extremities: hands, wrist, feet and legs) and must not be co-located or operated with any other antenna or transmitter. Shielded tape Ferrite Core Shielded tape Ferrite Core Details of Ferrite Core Model: SFC-3 Manufacture: Kitagawa Industries Co., Ltd.