| submitted | available | document details (if available) | source link |
|---|---|---|---|
| various | USERS | Users Manual | 1.26 MiB |
3-221-208-11 (1) Cordless Telephone with Answering System Operating Instructions US SPP-A9276 2000 Sony Corporation Owners Record The model and the serial numbers are located at the bottom of the unit. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. SPP-A9276 Serial No. ________________ 2US IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:
1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool. 5. Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product. 6. Slots and openings in the cabinet and the back or bottom are provided for ventilation. To protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the product on the bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heat register. This product should not be placed in a built-in installation unless proper ventilation is provided. 7. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your dealer or local power company. 8. Do not allow anything to rest on the power cord. Do not locate this product where the cord will be abused by persons walking on it. 9. Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock. 10. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product. 11. To reduce the risk of electric shock, do not disassemble this product, but take it to a qualified service personnel when some service or repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the appliance is subsequently used. If liquid has been spilled into the 12. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
A. When the power cord or plug is damaged or frayed. B. product. C. If the product has been exposed to rain or water. D. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions because improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation. E. the cabinet has been damaged. F. change in performance. If the product exhibits a distinct If the product has been dropped or 3US 13. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 14. Do not use the telephone to report a gas leak in the vicinity of the leak. SAVE THESE INSTRUCTIONS CAUTION:
To reduce the risk of fire or injury to persons by battery, read and follow these instructions. 1. Use only the following type and size battery pack: Sony BP-T24. 2. Do not dispose of the battery pack in a fire. The cell may explode. Check with local codes for possible special disposal instructions. 3. Do not open or mutilate the battery pack. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed. 4. Exercise care in handling battery pack in order not to short the battery with conducting materials such as rings, bracelets, and keys. The battery or conductor may overheat and cause burns. 5. Charge the battery pack provided with or identified for use with this product only in accordance with the instructions and limitations specified in the instruction manual provided for this product. 6. Observe proper polarity orientation between the battery pack and battery charger. INFORMATION FOR GENERAL TELEPHONES 1. This equipment complies with Part 68 of the FCC rules. On the bottom of this equipment is a label that contains, among other information, the FCC certification number and ringer equivalence number (REN) for this equipment. If requested, this information must be provided to the telephone company. 2. The applicable certification jack (connector) USOC-RJ11C is used for this equipment. 4US 3. This equipment is designed to be connected to the telephone network or premises wiring using a compatible modular jack that is Part 68 compliant. The FCC compliant telephone cord and modular plug is provided with this equipment. 4. The REN is used to determine the quantity of devices that may be connected to the telephone line. Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call. Typically, the sum of the RENs should not exceed five (5.0).To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. 5. If this equipment (SPP-A9276) causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isnt practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. 6. The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice so you can make necessary modifications to maintain uninterrupted service. 7. If trouble is experienced with this equipment
(SPP-A9276), for repair or warranty information, please contact Sony Direct Response Center: Tel 1-800-222-7669. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. 8. All repairs will be performed in an authorized Sony service station. 9. This equipment cannot be used to party lines or coin lines. 10.This equipment is hearing aid compatible. If your telephone is equipped with automatic dialers When programming emergency numbers and
(or) making test calls to emergency numbers:
1. Remain on the line and briefly explain to the dispatcher the reason for the call. 2. Perform such activities in the off-peak hours, such as early morning or late evenings. Caution You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/
TV technician for help. 5US Table of contents Getting Started 8 Read this first 9 Step 1: Checking the package contents 10 Step 2: Setting up the base phone 13 Step 3: Preparing the battery pack 15 Step 4: Entering the area code 19 Step 5: Setting up the phone services 22 Step 6: Setting the day and time 24 Identifying the parts Basics 28 Making calls 33 Redialing 35 Receiving calls Telephone Features 39 One-touch dialing 39 43 Phone Directory 43 Storing phone numbers and names Changing a stored name and/or phone number Making calls with one-touch dialing Storing phone numbers and names Changing a stored name and/or phone number Erasing a memory location Making calls from the Phone Directory 41 42 44 45 46 6US 48 Transferring the Phone Directory memory 50 Switching the phones during a call 50 50 To switch from the base phone to the cordless handset To switch from the cordless handset to the base phone 51 Talking between the phones
(Intercom) 51 52 To talk from the cordless handset to the base phone To talk from the base phone to the cordless handset 53 Transferring a call 53 To transfer from the base phone to the cordless handset To transfer from the cordless handset to the base phone Answering Machine Features 55 Preparing the answering machine 55 Adjusting the answering volume of the base phone Recording the greeting Selecting the ring time Selecting the recording quality Selecting the answering mode Turning on the answering function 54 56 58 59 60 62 63 Playing back messages Erasing messages 65 66 Screening incoming calls 66 To screen incoming calls on the cordless handset To answer the call 66 67 Recording a memo 68 Operating from an outside phone 68 69 Setting the remote ID code
(security code) Picking up new messages Additional Information 81 Mounting the base phone on a wall 82 Carrying the cordless handset by the belt clip 84 Notes on power sources 85 Maintenance 86 Troubleshooting 91 Specifications 92 Index Caller ID Features Back cover LIMITED WARRANTY 70 Understanding the Caller ID service 70 When you receive a call 71 Looking at the Caller ID list 71 72 Viewing the Caller ID list Erasing data from the Caller ID list 74 Using the Caller ID list 74 Calling back a number from the Caller ID list Playing back a message from the Caller ID list Storing a number of the Caller ID list into the Phone Directory To change the number of digits of the phone number 76 77 78 80 Using Caller ID with call waiting service Table of contents 7US Getting Started Read this first Before you use your phone, you must first set it up. Heres a quick way to set up your phone: Steps 1 to 6. Step 1 (page 9) First, unpack the phone and the supplied accessories. Base phone Step 2 (pages 10 to 12) You need to do three things to set up the base phone, including finding the best location for the base phone. Step 3 (pages 13 to 14) Insert the battery pack into the cordless handset and charge it for more than 12 hours. Step 4 (pages 15 to 18) Enter the area code to use the Caller ID service. Step 5 (pages 19 to 21) Set up the Caller ID with call waiting and the Long Distance services. Step 6 (pages 22 to 23) Finally, set the day and time to stamp day and time for the incoming messages. Cordless handset Thats it!
8US Getting Started Step 1 Checking the package contents Make sure you have received the following items in the package. If anything is missing, contact your local Sony dealer. G e t t i n g S t a r t e d AC power adaptor (AC-T107) Base phone Cordless handset Charger Handset Handset cord Telephone line cords (2) Wall bracket for base phone Rechargeable battery pack
(BP-T24) Belt clip Getting Started 9US Step 2 Setting up the base phone Do the following steps:
Choose the best location Connect the base phone Choose the dialing mode Choose the best location Where you place the base phone affects the reception quality of the cordless handset. Away from noise sources such as a window by a street with heavy traffic Away from television sets and other electronic equipment Away from heat sources, such as radiators, airducts, and sunlight Away from a microwave oven Away from excessive moisture, extremely low temperatures, dust, mechanical vibration, or shock Away from a personal computer Away from another cordless telephone Near a central location and on a level surface CAUTION: Should you experience intermittent loss of audio during a conversation, try moving closer to the base or move base phone away from other noise sources. The cordless telephone operates at a frequency that may cause interference to nearby TVs and VCRs; the base phone should not be placed near or on the top of a TV or VCR; and, if interference is experienced, moving the cordless telephone farther away from the TV or VCR will often reduce or eliminate the interference. 10US Getting Started Connect the base phone If you want to hang the base phone on the wall, see page 81. 4 1 Hook the cord. 3 To an AC outlet To DC IN 11V AC power adaptor
(supplied AC-T107) To LINE To HANDSET 2 To the telephone outlet Telephone line cord
(supplied) G e t t i n g S t a r t e d 1 Connect the handset cord to the HANDSET jack and to the handset. 2 Connect the telephone line cord to the LINE jack and to a telephone outlet. 3 Connect the AC power adaptor to the DC IN 11V jack and to an AC outlet. 4 Raise the antenna. Make sure it points towards the ceiling. continued Getting Started 11US Step 2: Setting up the base phone (continued) Notes Use only the supplied AC-T107 AC power adaptor. Do not use any other AC power adaptor. Connect the AC power adaptor to a continuous power supply. Place the base phone close to the AC outlet so that you can unplug the AC power adaptor easily. Tip If your telephone outlet is not modular, contact your telephone service company for assistance. Polarity of the plug
Modular Choose the dialing mode For the telephone to work properly, select an appropriate dialing mode
(tone or pulse). DIAL MODE switch Depending on your dialing system, set the DIAL MODE switch as follows:
If your dialing system is Set the switch to Tone Pulse T P If you aren't sure of your dialing system Make a trial call with the DIAL MODE switch set to T. If the call connects, leave the switch as is; otherwise, set to P. 12US Getting Started Step 3 Preparing the battery pack Charge the battery pack for more than 12 hours before you start using your cordless handset. 1 Slide open the battery compartment lid of the cordless handset. 2 Connect the battery connector with correct polarity (black wire goes on lower side and red wire goes on upper side). G e t t i n g S t a r t e d BP-T24 Red Black Hook 3 Hook the cords and insert the battery pack. Then close the lid. To an AC outlet Front side CHARGE lamp 4 Connect the AC power adaptor to an AC outlet and place the cordless handset on the charger . The CHARGE lamp on the charger lights up when the cordless handset is properly seated on the charge terminals of the charger. Charge the battery pack for more than 12 hours so that the battery is fully charged. The CHARGE lamp remains lit even after charging is completed. continued Getting Started 13US Step 3: Preparing the battery pack (continued) Battery duration A fully charged battery pack lasts for about:
Approx. 5 hours when you use the cordless handset continuously Approx. 7 days when the cordless handset is in standby mode. Notes The battery pack will gradually discharge over a long period of time, even when not in use. If you leave the battery pack in the cordless handset without charging it, the battery pack will be completely discharged. It may require several times of charging to recover to its full capacity. While charging, the battery pack warms up. This is not a malfunction. To obtain the best performance from the battery Do not place the cordless handset on the charger after each call. The battery works best if the cordless handset is returned to the charger after two or three calls. However, do not leave the cordless handset off the charger for a long period of time as this will completely discharge the battery pack. When to purchase a new battery pack If the battery lasts only a few minutes even after 12 hours of charging, the usable life of the battery has expired and needs replacement. Contact your local Sony authorized dealer or service center, and ask for a Sony BP-T24 rechargeable battery pack. Note Battery life may vary depending on usage condition and ambient temperature. 14US Getting Started Step 4 Entering the area code When you use this phone for the first time, or move to an area that has a different area code, you must enter your home area code. Otherwise, you cannot use some functions of this phone and the Caller ID functions. This is also necessary because the phone must be able to select an area code to properly dial a call from the Caller ID list. Depending on your region, enter the 3-digit area code as follows:
Case 1. If 7-digit dialing (no area code) is accepted for local calls in your area, see To enter your home area code below. If you live in an area where calls from or to other local areas can also be made by 10-digit dialing
(area code + number), you can register up to 5 local area codes with this telephone to take advantage of this system. See To enter the local area code (For 10 digits phone number users) on page 17. Case 2. If 10-digit dialing (area code + number) is required for all local calls in your area, see To enter the local area code (For 10 digits phone number users) on page 17. Entering the area code is only possible on the base phone. To enter your home area code G e t t i n g S t a r t e d
(ERASE) Jog Button 1 Press (PROGRAM). 2 Turn Jog Dial to choose BASE SETTINGS, and then press Jog Button. BASE SETTINGS GO BACK AREA CODE PHONE SERVICES CLOCK 3 Press Jog Button. AREA CODE GO BACK HOME : LOCAL 1: LOCAL 2:
continued Getting Started 15US Step 4: Entering the area code (continued) 4 Press Jog Button again. ENTER HOME AREA CODE. appears on the display. 5 Enter the three digits of your home area code using the dialing keys. 6 Press (PROGRAM). You hear a long confirmation beep. ENTER HOME AREA CODE. _ Notes If the home area code is already entered, it appears on the display in step 3. To enter a different home area code, see To change the home area code below. Do not allow more than 20 seconds to elapse between each step of the procedure. If the area code has not been entered, calling back from the Caller ID list and storing the Caller ID data into the Phone Directory cannot be performed. Tips When you select [GO BACK], you can return to the previous set display by pressing Jog Button. You may press Jog Button instead of (PROGRAM) in step 6. To check the current home area code, perform steps 1 to 3. The home area code appears on the display for about 20 seconds. To change the home area code 1 Perform steps 1 to 4 on pages 15 to 16. The current home area code appears on the display. 2 Press (ERASE) to erase the current home area code. 3 Enter a new home area code using the dialing keys. 4 Press (PROGRAM). You hear a long confirmation beep. To erase the home area code You can erase the home area code. Perform steps 1 and 2 above, then press (PROGRAM). The home area code will be erased, and you hear a long confirmation beep. 16US Getting Started
To enter the local area code (For 10 digits phone numbers users) If a call matches one of the local area codes you entered, the phone number will be registered with 10 digits in the Caller ID list (area code
+ number). If a call does not match one of the local area codes you entered, the phone number will be registered with 11 digits in the Caller ID list (1 + area code + number). Some regions of the country allow you to have more than one local area code. (Up to five local area codes can be entered in this phone.) 1 Perform steps 1 to 3 on page 15. 2 Select the number (LOCAL 1 to LOCAL 5) to enter the local area code by turning Jog Dial. AREA CODE HOME : 3 Press Jog Button. LOCAL 1: LOCAL 2: LOCAL 3:
ENTER LOCAL AREA CODE 1. appears on the display when you select LOCAL 1 in step 2. 4 Enter the three digits of the local area code using the dialing keys. 5 Press (PROGRAM). G e t t i n g S t a r t e d You hear a long confirmation beep. Notes If the local area code is already entered, it appears on the display in step 2. To enter a different local area code, see To change the local area code below. Do not allow more than 20 seconds to elapse between each step of the procedure. Tips When you select [GO BACK], you can return to the previous set display by pressing Jog Button. You may press Jog Button instead of (PROGRAM) in step 5. To check the current local area code, perform steps 1 and 2. The local area code appears on the display for about 20 seconds. continued Getting Started 17US Step 4: Entering the area code (continued) To change the local area code 1 Perform steps 1 to 3 on page 17. The current local area code appears on the display. 2 Press (ERASE) to erase the current local area code. 3 Enter a new local area code using the dialing keys. 4 Press (PROGRAM). You hear a long confirmation beep. To erase the local area code You can erase the local area code. Perform steps 1 and 2 on page 17, then press (PROGRAM). The local area code will be erased, and you hear a long confirmation beep. 18US Getting Started G e t t i n g S t a r t e d Step 5 Setting up the phone services Set up the Caller ID with call waiting and the Long Distance services before use. Setting up the phone services is only possible on the base phone. To set up the Caller ID with call waiting service In order to use this service, you must first subscribe to Caller ID with call waiting service (see page 80). The Caller ID with call waiting service is preset to ACTIVE.
(ERASE) Jog Button
(LONG DIST. SAVER) 1 Press (PROGRAM). 2 Turn Jog Dial to choose BASE SETTINGS, and then press Jog Button. 3 Turn Jog Dial to choose PHONE SERVICES, and then press Jog Button. PHONE SERVICES GO BACK CALL WAITING ID LONG DISTANCE 4 Press Jog Button. CALL WAITING ID GO BACK ACTIVE INACTIVE 5 Turn Jog Dial to choose ACTIVE or INACTIVE, and then press Jog Button. You hear a long confirmation beep. continued Getting Started 19US
Step 5: Setting up the phone services (continued) Note Do not allow more than 20 seconds to elapse between each step of the procedure. Tip When you select [GO BACK], you can return to the previous set display by pressing Jog Button. To set up the Long Distance service Many telephone companies and service providers nowadays offer low-
rate long distance calls. Such services are usually initiated by dialing an access number prior to the long distance call itself. The Long Distance Saver function enables you to dial the access number of your long distance carrier by pressing just
(LONG DIST. SAVER). After setting up the access number and activating the button function in the menu, you only need to press
(LONG DIST. SAVER) for dialing the access number of your long distance carrier. In order to use this function, you must first activate the button function by memorizing the access number of your choice in the menu and by setting the long distance menu function to ACTIVE The long distance menu is preset to INACTIVE, no preset access number is registered. 1 Perform steps 1 to 3 on page 19. 2 Turn Jog Dial to choose LONG DISTANCE, and then press Jog Button. 3 Turn Jog Dial to choose ACTIVE or INACTIVE(to deactivate), and then press Jog Button. You hear a long confirmation beep. Notes If you choose INACTIVE in step 3, (LONG DIST. SAVER) will be deactivated and you cannot use (LONG DIST. SAVER) even with a registered access number until the function is activated again. Some Long Distance services may not be available in your state. Prices and conditions may vary. For details, contact your telephone company or your long distance provider. Some long distance call programs require a subscription with the carrier company before usage. 20US Getting Started To set up the access number 1 Perform steps 1 and 2 on page 20. 2 Turn Jog Dial to choose ACCESS NUMBER, and then press Jog Button. 3 Enter the access number using the dialing keys. 4 Press (PROGRAM). 5 Turn Jog Dial to choose YES to activate
(LONG DIST. SAVER), and then press Jog Button. You hear a long confirmation beep. Notes Do not use (LONG DIST. SAVER) to dial EMERGENCY services, customer service numbers, your local telephone company, local numbers or toll free numbers. If you press (LONG DIST. SAVER) twice, the dialing of the registered access number is cancelled and [LONG DISTANCE] disappears from the display. To change the access number 1 Perform steps 1 and 2 above. The current access number appears on the display. 2 Press (ERASE) to erase the current access number. 3 Enter a new access number using the dialing keys. 4 Press (PROGRAM). 5 Turn Jog Dial to choose YES to activate
(LONG DIST. SAVER), and then press Jog Button. You hear a long confirmation beep. G e t t i n g S t a r t e d Getting Started 21US Step 6 Setting the day and time Set the day and time so that you can stamp day and time for the incoming messages. You will hear the recorded day and time when you play back messages. Jog Button 1 Press (PROGRAM). 2 Turn Jog Dial to choose BASE SETTINGS, and then press Jog Button. 3 Turn Jog Dial to choose CLOCK, and then press Jog Button. CLOCK GO BACK SUNDAY MONDAY TUESDAY 4 Set the correct day of the week by turning Jog Dial, and then press Jog Button. ENTER HOUR AND PRESS JOG BUTTON 12:00AM 22US Getting Started
5 Set the hour (1 to 12) by turning Jog Dial, and then press Jog Button. 6 Set the minute (00 to 59) by turning Jog Dial, and then press Jog Button. ENTER MINUTE AND PRESS JOG BUTTON 12:00AM ENTER AM/PM AND PRESS JOG BUTTON 12:00AM 7 Choose AM or PM by turning Jog Dial, and then press Jog Button. You hear a long confirmation beep and the day and time you just entered is announced. Then the phone starts counting time. Notes Do not allow more than 60 seconds to elapse between each step of the procedure. SUN 12:00AM on the display of the base phone flashes when the day and time is cleared due to a power interruption, or when you connect the base phone to the AC outlet for the first time. If the current day and time are not set, you will not hear a time stamp when you play back recorded messages. Tip When you select [GO BACK], you can return to the previous set display by pressing Jog Button. G e t t i n g S t a r t e d Getting Started 23US
Identifying the parts Refer to the pages indicated in parentheses for details. Base phone 1 2 3 4 5 6 7 8 9 0 qa qs qd qf qg qh qj qk ql w;
wa ws wd wf wg wh 1 Display window (p. 31, 63, 70) 2 VOLUME +/ buttons
(p. 32, 64) Adjusts the handset or speaker volume. 3 PLAY/STOP button (p. 63) Plays back the messages. 4 ANSWER ON/OFF button
(p. 62, 63) Turns the answering function on or off. Lights when the answering function is on, and flashes when a new message is recorded. 5 . REPEAT button (p. 64) Press once to repeat the current message or twice to go back to the previous message. 6 REVIEW button (p. 64) Keep the button pressed for a playback review of the current message. Getting Started 24US 7 Handset (p. 11, 31, 37) 8 Speaker 9 Dialing keys (p. 31) q; LONG DIST. SAVER button
(p. 20, 31) Lets you make a long distance call with the registered access number. qa TONE button (p. 32) Allows you to switch temporarily to tone dialing. qs SPEAKERPHONE button
(p. 31) Lets you make or receive a call. qd # button (p. 78) Used to change the number of digits of the phone number in the Caller ID list. qf QUICK button (p. 64) Keep the button pressed for quick playback of messages. G e t t i n g S t a r t e d wj wk wl e;
ea qg > SKIP button (p. 64) Press to skip to the next message. qh ERASE button (p. 16, 21, 65) qj PROGRAM button (p. 15) qk Antenna (p. 11, 81) ql MEMO button (p. 67) Records a memo message. w; Jog Button (p. 15) wa Jog dial (p. 15, 71) ws REDIAL/PAUSE button (p. 33) Redials one of the last five numbers called/inserts a pause in the dialing sequence. wd INTERCOM button (p. 52) Lets you talk between the base phone and cordless handset. wf CALL WAITING/FLASH button
(p. 37, 80) Switches to a second call if you have call waiting service, or lets you make a new call. wg HOLD button (p. 32) Puts a call on hold. wh MIC (microphone) (p. 56, 67) wj Hook for AC power adaptor cord (p. 11, 81) wk DIAL MODE switch (p. 12) Selects pulse or tone dialing. wl DC IN 11V jack (p. 11, 81) e; LINE (telephone line) jack
(p. 11, 81) ea HANDSET jack (p. 11) continued Getting Started 25US Identifying the parts (continued) Cordless handset 1 2 3 4 5 6 7 8 9 0 qa qs qd qf qg qh qj qk ql w;
wa ws wd wf 1 Antenna 2 Speaker [EZfit] (p. 30) 3 Display window (p. 28, 70) 4 Jog dial (p. 39, 71) 5 TALK button (p. 28) Lets you make or receive a call. 6 INTERCOM button (p. 51) Lets you talk between the base phone and the cordless handset. 7 LONG DIST. SAVER button
(p. 20, 29) Lets you make a long distance call with the registered access number. 8 . REPEAT button (p. 64) Press once to repeat the current message or twice to go back to the previous message. 26US Getting Started 9 REVIEW button (p. 64) Keep the button pressed for a playback review of the current message. 0 Dialing keys (p. 28) qa Battery compartment (p. 13) qs TONE button (p. 29) Allows you to switch temporarily to tone dialing. qd HOLD/PLAY BACK button
(p. 29, 63, 66) Puts a call on hold/plays back recorded messages. qf RING switch (p. 36) Switches the ringer to on/off. wg wh G e t t i n g S t a r t e d qg CALL WAITING/FLASH button
(p. 36, 80) Switches to a second call if you have call waiting service, or lets you make a new call. qh REDIAL/PAUSE button
(p. 33, 41) Redials one of the last five numbers called/inserts a pause in the dialing sequence. qj OFF button (p. 28) Allows you to disconnect the call. qk > SKIP button (p. 64) Press to skip to the next message. ql QUICK button (p. 64) Keep the button pressed for quick playback of messages. w; # button (p. 78) Used to change the number of digits of the phone number in the Caller ID list. wa PROGRAM button (p. 39) ws ERASE button (p. 41, 65) wd ONE-TOUCH DIAL (A, B, C) buttons (p. 42) wf Microphone wg I (HEADSET) jack (p. 28, 35, 83) wh VOL (volume) switch (p. 29) Adjust the cordless handset volume. Getting Started 27US Basics Making calls
(LONG DIST. SAVER)
(CALL WAITING/FLASH) I (HEADSET) jack VOL switch
(*TONE)
(HOLD)
(ERASE) 1 Pick up the cordless handset from the charger. 2 Press (TALK) and wait until TALK appears on the display and the display also shows the talk time in hours, minutes and seconds. The dialing keys light up. You then hear a dial tone. CORDLESS HANDSET IN USE appears on the display of the base phone. If you hear five short error beeps and OUT OF RANGE appears on the display, move closer to the base phone. 3 Dial the phone number. 4 When youre done talking, press
(OFF) or replace the cordless handset on the charger. The display turns off. To make a call after checking the phone number You can dial the phone number before pressing (TALK) or
(LONG DIST. SAVER). If you make a mistake when dialing the phone number, press (ERASE) to erase the number. 28US Basics Making calls when the headset is connected When a headset (optional) is connected to the I
(HEADSET) jack on the cordless handset, you can talk through the headset. Making calls using the Long Distance Saver function Set the menu for the Long Distance service to ACTIVE. See To set up the Long Distance service on page 20. 1 Pick up the cordless handset from the charger. 2 Press (LONG DIST. SAVER). Open B a s i c s
[LONG DISTANCE] appears on the display. To cancel this function, press (LONG DIST. SAVER) again or press (TALK). 3 Dial the long distance phone number (e.g., 1-201-123-4567, or 011-...). 4 When youre done talking, press (OFF) or replace the cordless handset on the charger. Additional tasks To Do this Adjust the cordless handset volume Put a call on hold Set the VOL switch to H (high), M (middle) or L (low). Press (HOLD). HOLD appears on the display. Press (HOLD) again or pick up the cordless handset from the charger to resume the conversation. Switch to tone dialing temporarily Press (*TONE) after youre connected. The line will remain in tone dialing until disconnected. Switch to another call
(call waiting service*) Press (CALL WAITING/FLASH). Press (CALL WAITING/FLASH) again to return to the first caller.
* You need to subscribe to this service from your telephone company. continued Basics 29US Making calls (continued) Notes When making a call on the cordless handset, appears on the display indicating the receiver sensitivity with the base phone. Three bars indicate a good reception, no bar indicates a bad reception. When calling from an area with poor reception, you may experience interference or the call may be disconnected, so try to use the cordless handset in areas that have a good reception. When you increase the sound volume, in some cases the back ground noise may be increased as well. You should adjust the volume accordingly. If the cordless handset beeps every second during a conversation and appears on the display, move closer to the base phone; otherwise, you will hear five short error beeps and OUT OF RANGE will appear on the display, and the call will be disconnected after 30 seconds. While talking with an outside caller via the base phone, you cannot make a call with the cordless handset. If you press (TALK), BASEPHONE IN USE appears on the display and you will hear a busy tone. When the talk time exceeds 9:59:59, the display counts from 0:00:00 again. Tip You can dial the phone number before step 2. If you make a mistake when dialing the phone number, press (ERASE) to erase the number. EZfit The EZfit adjusts to fit any shape ear, thereby ensuring clear voice reception. If the battery becomes weak during a call The cordless handset will beep twice per second, BATTERY LOW appears on the display. Finish your call and replace the cordless handset on the charger to charge the battery pack. Or, to continue your phone conversation with the base phone, press (HOLD) on the cordless handset to hold the line, and then pick up the handset or press
(SPEAKERPHONE) on the base phone. For optimum performance, charge the battery for a full 12 hours. Note that during the initial charge time (approx. 10 minutes), PLEASE WAIT... and BATTERY LOW appear on the display and the cordless handset cannot be used. After BATTERY LOW turns off, you may be able to use the cordless handset, but the battery duration will be very short; thus it is recommended that you fully charge the battery before next use. 30US Basics Making calls with the base phone Pick up the handset or press
(SPEAKERPHONE) on the base phone. TALK or SPEAKERPHONE appears on the display and the display also shows the talk time in hours, minutes and seconds. Dial the phone number. When youre done talking, replace the handset in the cradle or press
(SPEAKERPHONE) again.
(CALL WAITING/ FLASH)
(REDIAL/PAUSE)
(VOLUME)
(PROGRAM)
(*TONE)
(ERASE) Jog Button Jog Dial
(LONG DIST. SAVER)
(HOLD)
(SPEAKERPHONE) To make a call after checking the phone number You can dial the phone number before picking up the handset or before pressing (SPEAKERPHONE). If you make a mistake when dialing the phone number, press (ERASE) to erase the number. B a s i c s Making calls using the Long Distance Saver function Set the menu for the Long Distance service to ACTIVE. See To set up the Long Distance service on page 20. 1 Pick up the handset or press (SPEAKERPHONE) on the base phone. 2 Press (LONG DIST. SAVER).
[LONG DISTANCE] appears on the display. To cancel this function, press (LONG DIST. SAVER) again or press (SPEAKERPHONE). 3 Dial the long distance phone number (e.g., 1-201-123-4567, or 011-...). 4 When youre done talking, replace the handset in the cradle or press (SPEAKERPHONE) again. continued Basics 31US Making calls (continued) Additional tasks To Adjust the handset or speakerphone volume Put a call on hold Do this During phone conversation, press (VOLUME)(+) or (-). There are 3 steps for the handset volume level, and 7 steps for the speakerphone volume level. Press (HOLD). HOLD appears on the display. Press (HOLD), (SPEAKERPHONE), or pick up the handset from the base phone to resume the conversation. Switch to tone dialing temporarily Press (*TONE) after youre connected. The line will remain in tone dialing until disconnected. Switch to another call
(call waiting service*) Press (CALL WAITING/ FLASH). Press (CALL WAITING/ FLASH) again to return to the first caller.
* You need to subscribe to the service from your telephone company. Notes While talking with an outside caller via the cordless handset, the display on the base phone shows CORDLESS HANDSET IN USE and you cannot make a call with the base phone. When the talk time exceeds 9:59:59, the display counts from 0:00:00 again. Tip You can switch between phone conversations via the handset and those via the speakerphone, simply by picking up the handset while talking over the speakerphone, or by pressing (SPEAKERPHONE) while talking over the handset. To obtain the best speakerphone performance You may not be able to hear the other partys voice in a noisy place. Therefore, use the speakerphone in a quiet room. Do not bring your hand or other object too close to the microphone or you will hear a shrill noise (feedback). When the speaker volume is loud, or the base phone has been placed close to a wall, you may find that the volume drops suddenly. This is due to a circuit in the telephone designed to protect against feedback. In such cases, lower the speaker volume slightly. 32US Basics Redialing Both the base phone and the cordless handset can each individually store five dialed phone numbers. Turn Press 1 Press (REDIAL/PAUSE). 2 Display the name or phone number you want to call by turning Jog Dial, and then press Jog Dial. (If youre at the base phone, press Jog Button.) 3 Turn Jog Dial to choose DIAL or LONG DISTANCE, and then press Jog Dial (or Jog Button). The phone number will be redialed. B a s i c s
(PROGRAM) Notes When the Long Distance service is set to ACTIVE, LONG DISTANCE call can be made (see page 20). The redial memory only registers up to 30 digits. Exceeding numbers will not be redialed. In the case of a power failure, only the redial on the base phone will be erased. The redial button does not store the access number of the Long Distance Saver. To redial a long distance call, press (LONG DIST. SAVER), then
(REDIAL/PAUSE). Tips If the phone number dialed has 16 digits or more, the redial list will show the selected number in two lines of max. 16 digits each. All other numbers of the redial list will be displayed with the first 15 digits and p indicating a number longer than 16 digits. If you redial the same number repeatedly, this number will only be counted as one number of the total five registered numbers that can be redialed. When dialing from a phone number with a registered name, that name will be displayed in the list in step 2. continued Basics 33US Making calls (continued) To store the dialed phone number into the Phone Directory 1 Display the name or phone number you want to store by doing steps 1 and 2 on page 33. 2 Turn Jog Dial to choose PROGRAM, and then press Jog Dial. (If youre at the base phone, press Jog Button.) 3 Enter the name by doing steps 4 and 5 on page 40. 4 Turn Jog Dial to choose [PGM], and then press Jog Dial (or Jog Button). You hear a long confirmation beep, and the name and the number are stored. Note The dialed phone numbers of up to 20 digits can be stored in the Phone Directory. To erase the dialed phone number one by one 1 Display the name or phone number you want to erase by doing steps 1 and 2 on page 33. 2 Turn Jog Dial to choose ERASE REDIAL, and then press Jog Dial. (If youre at the base phone, press Jog Button.) 3 Turn Jog Dial to choose YES, and then press Jog Dial (or Jog Button). You hear a long confirmation beep, and the number is erased. To erase the entire dialed phone numbers at once 1 Press (PROGRAM). 2 Turn Jog Dial to choose MEMORY MANAGE, and then press Jog Dial. (If youre at the base phone, press Jog Button.) 3 Turn Jog Dial to choose ERASE ALL RDL, and then press Jog Dial (or Jog Button). 4 Turn Jog Dial to choose ERASE REDIAL, and then press Jog Dial (or Jog Button). You hear a long confirmation beep, and the entire number are erased. 34US Basics Receiving calls 1 When you hear the phone ring:
Press (TALK). or
(CALL WAITING/FLASH) I (HEADSET) jack VOL switch Pick up the cordless handset from the charger when the cordless handset is placed on the charger. (When Quick talk is set to USE; see page 36) TALK appears on the display and the display also shows the talk time in hours, minutes and seconds. CORDLESS HANDSET IN USE appears on the display of the base phone. B a s i c s 2 When youre done talking, press
(OFF) or replace the cordless handset on the charger. The display turns off.
(HOLD)
(PROGRAM) Receiving calls when the headset is connected When a headset (optional) is connected to the I
(HEADSET) jack on the cordless handset, you can talk through the headset. Open continued Basics 35US Receiving calls (continued) Additional tasks To Do this Adjust the cordless handset volume Set the VOL switch to H (high), M (middle) or L
(low). Put a call on hold Switch to another call
(call waiting service*) Press (HOLD). HOLD appears on the display. Press (HOLD) again or pick up the cordless handset from the charger to resume the conversation. Press (CALL WAITING/FLASH). Press (CALL WAITING/FLASH) again to return to the first caller. Receive a call by only picking up the cordless handset from the charger, without pressing
(TALK)(Quick talk) Press (PROGRAM). Turn Jog Dial to choose QUICK TALK, then press Jog Dial. Turn Jog Dial to choose USE, then press Jog Dial.
* You need to subscribe to this service from your telephone company. Note If there is an incoming call during intercom conversation, intercom call will be disconnected, and both the base phone and the cordless handset will ring. Tip To inform you of an incoming call, the display shows ** RINGING ** even when you set the RING switch on the cordless handset to OFF. If you have subscribed to the Caller ID service;
the callers number and/or name appears on the display when you receive a call (see page 70) or when another call comes in by call waiting service. the ringer sound changes to a higher tone if the call matches the number VIP stored on ONE-TOUCH DIAL buttons or in the Phone Directory (memory match function; see page 70). To turn the ringer off Set the RING switch on the bottom to OFF.
[RINGER OFF] appears on the display. The cordless handset wont ring. You can still make calls, and also receive calls if another telephone connected to the same line rings to inform you on incoming calls. You can also receive an intercom call. RING switch 36US Basics Receiving calls with the base phone When you hear the phone ring, pick up the handset or press
(SPEAKERPHONE) on the base phone. TALK or SPEAKERPHONE appears on the display and the display also shows the talk time in hours, minutes and seconds. When youre done talking, replace the handset in the cradle or press
(SPEAKERPHONE) again. To obtain the best speakerphone performance, see page 32. Additional tasks To Do this
(CALL WAITING/ FLASH)
(VOLUME)
(SPEAKERPHONE)
(HOLD) B a s i c s Adjust the handset or speakerphone volume Put a call on hold Switch to another call
(call waiting service*) Adjust the ringer volume of the base phone During phone conversation, press (VOLUME)(+) or (-). There are 3 steps for the handset volume level, and 7 steps for the speakerphone volume level. Press (HOLD). HOLD appears on the display. Press (HOLD), (SPEAKERPHONE), or pick up the handset from the base phone to resume the conversation. Press (CALL WAITING/ FLASH). Press (CALL WAITING/ FLASH) again to return to the first caller. Press (VOLUME)(+) or (-). The ringer volume can be adjusted to three different levels: high, low, and OFF. If the ringer is set to OFF, [RINGER OFF] will appear on the display.
* You need to subscribe to the service from your telephone company. continued Basics 37US Receiving calls (continued) Notes Even when you set RINGER VOL on the base phone to OFF, the cordless handset will ring when the RING switch on the cordless handset is set to ON. If there is an incoming call during intercom conversation, intercom call will be disconnected, and both the base phone and the cordless handset will ring. Tips To inform you of an incoming call, the display shows ** RINGING **
even when you set RINGER VOL on the base phone to OFF. You can switch between phone conversations via the handset and those via the speakerphone, simply by picking up the handset while talking over the speakerphone, or by pressing (SPEAKERPHONE) while talking over the handset. 38US Basics Telephone Features One-touch dialing You can dial with one touch of a key by storing a phone number on a one-touch dialing button. Storing phone numbers and names Turn Press
(TALK)
(REDIAL/PAUSE)
(LONG DIST. SAVER)
(ERASE) Example: to store SONY 123-
4567. 1 Press (PROGRAM). HANDSET MENU GO BACK PHONE DIRECTORY ONE-TOUCH DIAL QUICK TALK 2 Turn Jog Dial to choose ONE-
TOUCH DIAL, and then press Jog Dial. ONE-TOUCH DIAL GO BACK ONE-TOUCH A ONE-TOUCH B ONE-TOUCH C 3 Turn Jog Dial to choose ONE-
TOUCH A to ONE-TOUCH C, and then press Jog Dial. T e l e p h o n e F e a t u r e s ONE-TOUCH DIAL buttons continued Telephone Features 39US One-touch dialing (continued) 4 Enter the name by turning Jog Dial. You can enter up to 15 characters. Turn Jog Dial until the desired character is selected, and then press Jog Dial. ENTER NAME
SONY_ ABCDEFGHIJKLMNOP QRSTUVWXYZ SWITCH NUMBER Each press of Jog Dial after choosing [SWITCH] switches the characters from upper case letters t lower case letters t numbers and symbols. ENTER NAME ENTER NAME ENTER NAME
_ ABCDEFGHIJKLMNOP QRSTUVWXYZ SWITCH NUMBER abcdefghijklmnop qrstuvwxyz SWITCH NUMBER 0123456789"#$&(
)*+,-./:; SWITCH NUMBER Enter successive characters in the same way. To enter a space, turn Jog Dial to choose
[p], and then press Jog Dial. 5 Turn Jog Dial to choose [NUMBER], and then press Jog Dial. ENTER NUMBERS appears on the display. 6 Enter the phone number by turning Jog Dial. You can enter up to 20 digits, including a tone and a pause, each of which is counted as one digit. Turn Jog Dial until the desired number is selected, and then press Jog Dial. Icon
[F]
[P]
[VIP]
Meaning Flash can be entered. Pause can be entered. If [VIP] has been selected, 9 will appear to the right of the displayed name. The ring type will change when calls are received from VIP registered numbers, and the number of calls from VIP numbers are listed separately from other messages. 40US Telephone Features
SONY ENTER NUMBERS _ 0123456789*# F P VIP PGM
SONY
1234567_ 0123456789*# F P VIP PGM
SONY
1234567_ 0123456789*# F P VIP PGM
Enter successive numbers in the same way. When the phone number of 16 digits or more has been entered , the phone number appears in two lines. 7 Turn Jog Dial to choose [PGM], and then press Jog Dial. You hear a long confirmation beep, and the name and the number are stored. The display goes off.
SONY 1234567890123456 12_ 0123456789*# F P VIP PGM Notes Names cannot be entered using the dialing keys. Do not allow more than 20 seconds to elapse between each step of the procedure. Tips When you select [GO BACK], you can return to the previous set display by pressing Jog Dial. If you have entered a wrong name or number in step 4 or 6, turn Jog Dial to choose [ P] then press Jog Dial or press (ERASE) to erase it. Then enter the correct name or number. You may press (PROGRAM) instead of doing steps 5 and 7. Phone numbers can be entered using the dialing keys in step 6. To store a number to be dialed via Private Branch Exchange
(PBX) Before entering a phone number in step 6 on page 40, do as follows:
1 Enter the outside line access digit (e.g., 9). 2 Turn Jog Dial to choose [P] and then press Jog Dial, or press (REDIAL/PAUSE). T e l e p h o n e F e a t u r e s Changing a stored name and/or phone number 1 Display the name you want to change by doing steps 1 to 3 on page 39. The cursor is at the right of the name. 2 Turn Jog Dial to choose [ P], then press Jog Dial to erase the characters, and enter the new name. If you want to change only the number, skip this step. ENTER NAME
SONY_ ABCDEFGHIJKLMNOP QRSTUVWXYZ SWITCH NUMBER continued Telephone Features 41US
One-touch dialing (continued) 3 Turn Jog Dial to choose [NUMBER], and then press Jog Dial. The cursor is at the right of the phone number. 4 Turn Jog Dial to choose [ P], then press Jog Dial to erase the number, and enter the new number. If you dont want to change the number, skip this step. 5 Turn Jog Dial to choose [PGM], and then press Jog Dial. You hear a long confirmation beep and the name and/or the number is changed.
SONY
1234567_ 0123456789*# F P VIP PGM Note The stored record with name and number can be replaced with a new name and number but it is not possible to erase the whole entry at one time. Tips Single character and number can be erased by pressing and 4.
(ERASE) in steps 2 You may press (PROGRAM) instead of doing steps 3 and 5. Making calls with one-touch dialing 1 Press (TALK) or (LONG DIST. SAVER) and wait until TALK appears on the display. 2 Press one of the ONE-TOUCH DIAL buttons ( (A) to (C)). The phone number stored on the one-touch dialing button will appear on the display and will be dialed. To check the phone number before one-touch dialing While the cordless handset is not in use, press one of the ONE-TOUCH DIAL buttons ((A) to (C)). The number stored on the button appears on the display for 20 seconds. To dial the number, press (TALK) while the number is displayed. 42US Telephone Features Phone Directory You can dial a number by scrolling through the Phone Directory. Both the base phone and the cordless handset can each store up to 50 separate numbers. Storing phone numbers and names Turn Press 1 Press (PROGRAM).
(Cordless handset) HANDSET MENU GO BACK PHONE DIRECTORY ONE-TOUCH DIAL QUICK TALK If PHONE DIRECTORY is not selected, turn Jog Dial to select it. 2 Press Jog Dial. (If youre at the base phone, press Jog Button.) ENTER NAME appears on the display. T e l e p h o n e F e a t u r e s ENTER NAME
_ ABCDEFGHIJKLMNOP QRSTUVWXYZ SWITCH NUMBER 3 Enter the name and the phone number by doing steps 4 to 7 on pages 40 to 41. Note If you try to save a 51st phone number, you will hear five short error beeps and THE MEMORY IS FULL. will be displayed. You cannot store the phone number. To store another phone number, erase one of the stored phone numbers (see page 45). continued Telephone Features 43US Phone Directory (continued) Changing a stored name and/or phone number 1 Display the name you want to change by doing steps 1 to 3 on pages 46 to 47. 2 Press Jog Dial. (If youre at the base phone, press Jog Button.) 3 Turn Jog Dial to choose EDIT, and then press Jog Dial (or Jog Button). The cursor is at the right of the name. 4 Change the name and/or the phone number by doing steps 2 to 5 on pages 41 to 42. BROWN JOHN SONY SMITH JOHN SALINGER GREG WAGNER ANTHONY GO BACK DIAL LONG DISTANCE EDIT ERASE DIRECTORY ENTER NAME
SONY_ ABCDEFGHIJKLMNOP QRSTUVWXYZ SWITCH NUMBER 44US Telephone Features
Erasing a memory location To erase the phone number one by one 1 Display the name you want to erase by doing steps 1 to 3 on pages 46 to 47. 2 Press Jog Dial. (If youre at the base phone, press Jog Button.) 3 Turn Jog Dial to choose ERASE DIRECTORY, and then press Jog Dial (or Jog Button). 4 Turn Jog Dial to choose YES, and then press Jog Dial (or Jog Button). You hear a long confirmation beep and the memory location is erased. BROWN JOHN SONY SMITH JOHN SALINGER GREG WAGNER ANTHONY GO BACK DIAL LONG DISTANCE EDIT ERASE DIRECTORY ERASE DIRECTORY GO BACK NO YES T e l e p h o n e F e a t u r e s continued Telephone Features 45US
Phone Directory (continued) To erase the entire memory at once 1 Press (PROGRAM). 2 Turn Jog Dial to choose MEMORY MANAGE, and then press Jog Dial. (If youre at the base phone, press Jog Button.) 3 Turn Jog Dial to choose ERASE ALL DIR, and then press Jog Dial (or Jog Button). 4 Turn Jog Dial to choose ERASE DIRECTORY, and then press Jog Dial (or Jog Button). You hear a long confirmation beep and the entire memory is erased. Making calls from the Phone Directory MEMORY MANAGE GO BACK SEND ALL DIR ERASE ALL CID ERASE ALL MSG ERASE ALL DIR? GO BACK NO ERASE DIRECTORY 1 Press Jog Dial. (If youre at the base phone, press Jog Button.) PHONE DIRECTORY appears on the display. PHONE DIRECTORY CALLER ID ABC DEF GHI Turn Press
(TALK)
(LONG DIST. SAVER)
(PROGRAM) 46US Telephone Features
2 Turn Jog Dial to select an alphabet group
([ABC], [DEF]...) which includes the initial character of the name you want to search for, and then press Jog Dial (or Jog Button). If a numbers or a symbol is the initial character, select the [etc] group. 3 Select the name you want to call by turning Jog Dial. 4 Press Jog Dial (or Jog Button). 5 Turn Jog Dial to choose DIAL or LONG DISTANCE, and then press Jog Dial (or Jog Button). The phone number will be dialed. PHONE DIRECTORY PQRS TUV WXYZ etc BROWN JOHN SONY SMITH JOHN SALINGER GREG WAGNER ANTHONY GO BACK DIAL LONG DISTANCE EDIT ERASE DIRECTORY T e l e p h o n e F e a t u r e s Note When the Long Distance service is set to ACTIVE, LONG DISTANCE can be selected in step 4 (see page 20). Tips When you select [GO BACK], you can return to the previous set display by pressing Jog Dial. (If youre at the base phone, press Jog Button.) When you select [CALLER ID] in step 1, you can switch to display the Caller ID list (see page 71). If there is no data recorded in the selected alphabet group in step 2, the data memory of the next following group will be displayed. You may press (TALK) or (LONG DIST. SAVER) on the cordless handset (If youre at the base phone, pick up the handset from the base phone or press
(SPEAKERPHONE) or (LONG DIST. SAVER)) to make a call instead of doing steps 4 and 5. continued Telephone Features 47US
Phone Directory (continued) Transferring the Phone Directory memory The Phone Directory memory can be transferred one by one or all at once (with a maximum of 50 numbers) from the cordless handset to the base phone and from the base phone to the cordless handset. To transfer one phone number from the Phone Directory 1 Display the name you want to transfer by doing steps 1 to 3 on pages 46 to 47. 2 Press Jog Dial. (If youre at the base phone, press Jog Button.) 3 Turn Jog Dial to choose SEND DIRECTORY, and then press Jog Dial (or Jog Button). You hear a long confirmation beep and the memory is transferred. BROWN JOHN SONY SMITH JOHN SALINGER GREG WAGNER ANTHONY GO BACK DIAL LONG DISTANCE EDIT ERASE DIRECTORY To transfer all phone numbers from the Phone Directory The Phone Directory receiving the transfer will be totally overwritten. 1 Press (PROGRAM). 2 Turn Jog Dial to choose MEMORY MANAGE, and then press Jog Dial. (If youre at the base phone, press Jog Button.) MEMORY MANAGE GO BACK SEND ALL DIR ERASE ALL CID ERASE ALL MSG 48US Telephone Features
3 Press Jog Dial again (or Jog Button). 4 Turn Jog Dial to choose SEND DIRECTORY, and then press Jog Dial (or Jog Button). SENDING appears on the display during the transfer. You hear a long confirmation beep and the entire memory is transferred.
(Cordless handset) SEND ALL DIR? GO BACK NO SEND DIRECTORY
(BASE OVERWRITE) Notes If there are already 50 numbers stored in the Phone Directory receiving the transferred number one by one from the other Phone Directory, CORDLESS HANDSET MEMORY IS FULL. or BASEPHONE MEMORY IS FULL. will appear on the display and five short error beeps will be heard to indicate that the transfer was unsuccessful. To make the transfer possible, erase one of the stored phone numbers existing in the Phone Directory (see page 45). If the transfer is unsuccessful, SEND TO CORDLESS HANDSET FAILED. or SEND TO BASEPHONE FAILED. will appear on the display, and five short error beeps will be heard. Move the c phone, and then start over the procedure. ordless handset closer to the base T e l e p h o n e F e a t u r e s Telephone Features 49US Switching the phones during a call You can easily switch between the cordless handset and the base phone without disconnecting the call. To switch from the base phone to the cordless handset 1 Press (HOLD) on the base phone. The call is on hold and HOLD appears on the display.
(SPEAKERPHONE) 2 Pick up the cordless handset from the charger (When Quick talk is set to USE; see page 36) or press (TALK) or (HOLD) on the cordless handset. You can continue talking to the caller through the cordless handset. To switch from the cordless handset to the base phone 1 Press (HOLD) on the cordless handset. The call is on hold and HOLD appears on the display. 2 Pick up the handset from the base phone or press
(SPEAKERPHONE) or (HOLD) on the base phone. You can continue talking to the caller through the base phone.
(TALK) 50US Telephone Features Talking between the phones
(Intercom) You can talk between the base phone and the cordless handset. You can start the intercom from either phone.
(TALK)
(OFF) To talk from the cordless handset to the base phone Press (INTERCOM). The base phone and cordless handset ring and ** PAGING ** appears on the display. When a person at the base phone picks up the handset from the base phone or presses (SPEAKERPHONE) or
(INTERCOM), you can talk with each other. INTERCOM appears on the display. When you are done talking Replace the cordless handset on the charger or press (OFF) on the cordless handset. If no one answers the phone Press (INTERCOM) again. T e l e p h o n e F e a t u r e s continued Telephone Features 51US Talking between the phones (Intercom) (continued) To talk from the base phone to the cordless handset Press (INTERCOM). The base phone and cordless handset ring and ** PAGING ** appears on the display. When a person at the cordless handset picks up the cordless handset from the charger (When Quick talk is set to USE; see page 36) or presses (TALK) or (INTERCOM), you can talk with each other. INTERCOM appears on the display. When you are done talking Replace the handset in the cradle or press (SPEAKERPHONE) on the base phone. If no one answers the phone Press (INTERCOM) again.
(SPEAKERPHONE) Notes If there is an incoming call during intercom conversation, intercom call will be disconnected, and both the base phone and the cordless handset will ring. While talking with an outside caller via the base phone or cordless handset, you cannot make an intercom call. If you press (INTERCOM) on the cordless handset, BASEPHONE IN USE appears on the display and you will hear a busy tone. Tip You can receive an intercom call on the base phone when RINGER VOL on the base phone is set to OFF, or the RING switch on the cordless handset is set to OFF. The phone will ring at a low level. or the cordless handset even 52US Telephone Features Transferring a call You can transfer a call between the cordless handset and base phone without disconnecting the call. To transfer from the base phone to the cordless handset
(SPEAKERPHONE)
(TALK) 1 Press (INTERCOM) to page the cordless handset. The call is put on hold on the base phone and the cordless handset rings.
** PAGING ** appears on the display of both the base phone and cordless handset. 2 Pick up the cordless handset from the charger (When Quick talk is set to USE; see page 36 ) or press (TALK) or (INTERCOM) on the cordless handset. INTERCOM appears on the display of both the cordless handset and base phone. You can talk between the base phone and the cordless handset. 3 To talk to the caller with the cordless handset, replace the handset in the cradle or press
(SPEAKERPHONE) on the base phone. TALK appears on the display of the cordless handset. If no one answers the phone Press (INTERCOM) again. T e l e p h o n e F e a t u r e s Tips You can receive an intercom call on the cordless handset even when the RING switch is set to OFF. If you have accidentally pressed (HOLD) in step 1, just press (INTERCOM) and you will get the same result as by pressing
(INTERCOM) only. continued Telephone Features 53US Transferring a call (continued) To transfer from the cordless handset to the base phone 1 Press (INTERCOM) to page the base phone. The call is put on hold on the cordless handset and the base phone rings. ** PAGING **
appears on the display of both the cordless handset and base phone. 2 Pick up the handset from the base phone or press
(SPEAKERPHONE) or
(INTERCOM) on the base phone. INTERCOM appears on the display of both the base phone and cordless handset. You can talk between the cordless handset and the base phone. 3 To talk to the caller with the base phone, replace the cordless handset on the charger or press
(OFF) on the cordless handset. TALK or SPEAKERPHONE appears on the display of the base phone. If no one answers the phone Press (INTERCOM) again.
(OFF)
(INTERCOM)
(SPEAKERPHONE) Tip You can receive an intercom call on the base phone even when RINGER VOL on the base phone is set to OFF. The base phone will ring at a low level. 54US Telephone Features Answering Machine Features Preparing the answering machine Answer settings can only be made on the base phone. Note that you cannot operate the base phone while the cordless handset is in use. Adjusting the answering volume of the base phone There are 7 steps for the answering volume level. The answering volume level is preset to 7. Jog Button 1 Press (PROGRAM). 2 Turn Jog Dial to choose ANSWER SETTINGS, and then press Jog Button. ANSWER SETTINGS GO BACK ANSWERING VOL. ANNOUNCE ONLY AUDIBLE INDI. 3 Press Jog Button again. 4 Turn Jog Dial to adjust the speaker volume, and then press Jog Button. You hear a long confirmation beep. A n s w e r i n g M a c h i n e F e a t u r e s Notes Do not allow more than 20 seconds to elapse between each step of the procedure. If the answering volume is set to minimum, you cannot screen the calls on the base phone. Tip When you select [GO BACK], you can return to the previous set display by pressing Jog Button. continued Answering Machine Features 55US Preparing the answering machine (continued) Recording the greeting This answering machine has prerecorded greetings (see page 57). However, you can record your own greeting. The greeting must be between two seconds and one minute long. You can record only one greeting, and it is used regardless of the answering mode (normal and announcement only modes. See page 61). Therefore, if you decide to change the mode, make sure that you record a new greeting to match the answering mode. 1 Press (PROGRAM). 2 Turn Jog Dial to choose ANSWER SETTINGS, and then press Jog Button. 3 Turn Jog Dial to choose GREETING, and then press Jog Button. GREETING GO BACK PLAY BACK RECORD ERASE GREETING Jog Button MIC (Microphone) 4 Turn Jog Dial to choose RECORD, and then press Jog Button. Please record your greeting after the tone. is announced and you hear a long confirmation beep. 5 After the tone, start recording. Speak about 12 inches (30 cm) away from the microphone. 56US Answering Machine Features RECORD GO BACK COMPLETE CANCEL(STOP) 6 Press Jog Button to stop recording. The phone automatically replays the recorded greeting. Notes Do not allow more than 20 seconds to elapse between each step of the procedure. If recording did not succeed, you hear five short error beeps. Start over the procedure. If a call comes in while recording a greeting, recording is cancelled. Start over the procedure. If you hear five short error beeps while recording, the recording area may be full. In this case, erase unnecessary messages (see page 65). If you want to cancel recording, turn Jog Dial to choose CANCEL (STOP), then press Jog Button in step 5. Tips When you select [GO BACK], you can return to the previous set display by pressing Jog Button. If one minute have passed in step 5, recording stops automatically. To record the greeting from a touch-tone phone, see page 69. Prerecorded greeting Normal mode:
Hello, Im unable to answer your call right now. Please leave your name, number and message after the tone. Announcement only mode: Hello, Im unable to answer your call right now. Please call again. Thank you. Tips If you wish to record your own announcement only greeting, follow the above sequence after setting ANNOUNCE ONLY to ON (page 60). Otherwise, the normal greeting will be recorded. You have to change the message each time you change the mode. To check the greeting Perform steps 1 to 3 on page 56, then press Jog Button. To change the greeting Record a new greeting. The new greeting replaces the old one. To erase the greeting Perform steps 1 to 3 on page 56, and turn Jog Dial to choose ERASE GREETING then press Jog Button. To go back to the factory preset greeting Erase your own greeting by doing step above. This will bring back the original greeting. A n s w e r i n g M a c h i n e F e a t u r e s continued Answering Machine Features 57US Preparing the answering machine (continued) Selecting the ring time You can select the number of rings before the answering machine starts to play back the greeting and records incoming messages. There are 6 options of ring time. The ring time is preset to TOLL SAVER. Jog Button 1 Press (PROGRAM). 2 Turn Jog Dial to choose ANSWER SETTINGS, and then press Jog Button. 3 Turn Jog Dial to choose RINGER TIMES, and then press Jog Button. RINGER TIMES GO BACK 1 TIME 2 TIMES 3 TIMES 4 Turn Jog Dial to select a ring duration, and then press Jog Button. (See the table for details.) You hear a long confirmation beep. Set RINGER TIMES to Mode TOLL SAVER If new messages have been recorded, the phone answers at the second ring and records incoming messages; if no new messages are recorded, it answers at the fifth ring. When you call from an outside phone and hear more than two rings, you know that there are no new messages. If you hang up at this point before the phone answers, you can save the toll for the call. 1 TIME to 4 TIMES The phone always answers at the set ring times and records incoming messages. Note Do not allow more than 20 seconds to elapse between each step of the procedure. Tip When you select [GO BACK], you can return to the previous set display by pressing Jog Button. 58US Answering Machine Features Selecting the recording quality The recording sound quality can be set to one of three graded levels. When the recording quality is set to HI (high), the available time for recording is half in comparison to when it is set to NORM (normal). The recording quality is preset to MID (middle). Jog Button 1 Press (PROGRAM). 2 Turn Jog Dial to choose ANSWER SETTINGS, and then press Jog Button. 3 Turn Jog Dial to choose RECORD QUALITY, and then press Jog Button. RECORD QUALITY GO BACK HI(SHORT PLAY) MID NORM(LONG PLAY) 4 Turn Jog Dial to choose HI
(SHORT PLAY), MID or NORM (LONG PLAY), and then press Jog Button. You hear a long confirmation beep. Notes Do not allow more than 20 seconds to elapse between each step of the procedure. A n s w e r i n g M a c h i n e F e a t u r e s The approx. length of the three recording grades are:
HI (SHORT PLAY) 8 minutes MID 15 minutes NORM (LONG PLAY) 20 minutes Actual recording time may very. Tip When you select [GO BACK], you can return to the previous set display by pressing Jog Button. continued Answering Machine Features 59US Preparing the answering machine (continued) Selecting the answering mode You can set the answering machine to record incoming messages
(normal mode), or just make an announcement without recording messages (announcement only mode). You can record your own greeting, or use the factory pre-recorded greetings. In the normal mode, you also have the option of having a beep to tell you if you have received any new incoming messages. 1 Press (PROGRAM). 2 Turn Jog Dial to choose ANSWER SETTINGS, and then press Jog Button. Jog Button ANSWER SETTINGS GO BACK ANSWERING VOL. ANNOUNCE ONLY AUDIBLE INDI. 3 Turn Jog Dial to choose ANNOUNCE ONLY or AUDIBLE INDI., and then press Jog Button. 4 Turn Jog Dial to choose ON or OFF, and then press Jog Button. You hear a long confirmation beep. 60US Answering Machine Features Answering mode When you wish to Pre-recorded greeting AUDIBLE INDI. is set to ON (normal mode) AUDIBLE INDI. is set to OFF (normal mode) ANNOUNCE ONLY is set to ON
(announcement only mode) play a greeting to ask the caller to leave a message and have the phone beep to alert you of recorded incoming messages. play a greeting to ask the caller to leave a message but you do not wish to sound a beep. make an announcement to the caller without accepting incoming messages when, for example, you are away on a long vacation. Hello, Im unable to answer your call right now. Please leave your name, number and message after the tone. Hello, Im unable to answer your call right now. Please call again. Thank you. Notes Do not allow more than 20 seconds to elapse between each step of the procedure. The same greeting is used regardless of the answering mode. Therefore, if you decide to change the mode, make sure that you record a new greeting to match the answering mode. Tips When the phone is in announcement only mode, ANNOUNCE ONLY will appear on the base display. When you select [GO BACK], you can return to the previous set display by pressing Jog Button. When the memory is full The recording area of this phones memory is about 20 minutes*
(including the greeting, messages, and memo). If the remaining recording area becomes less than one minute, the phone automatically switches to announcement only mode, which does not record messages, and the greeting will be switched to the pre-recorded greeting. Confirm the available time left for recording in the base display.
* Available time for recording at NORM (LONG PLAY) sound quality. If you wish to record more messages, erase the existing messages (see page 65). You can also erase the messages from an outside phone (see page 69). A n s w e r i n g M a c h i n e F e a t u r e s continued Answering Machine Features 61US Preparing the answering machine (continued) Turning on the answering function Press (ANSWER ON/OFF) so that it lights up in red. Notes When the memory is full, you hear five short error beeps and you cannot turn on the answering function. Erase unnecessary messages (see page 65). If four minutes have passed while recording the incoming message, the line is automatically disconnected. If the message is shorter than two seconds, it will not be recorded. Tips The answering machine will automatically answer a call after 10 rings even if the answering function is off. The answering function will remain on for all subsequent calls. You can also turn on or off the answering function from an outside phone
(see page 69). To turn off the answering function Press (ANSWER ON/OFF) so that the red light goes off. 62US Answering Machine Features Playing back messages You can play back messages on both the base phone and the cordless handset. When the phone is not in use and not in announcement only mode, the display of the base phone shows the following. TUE 4:53PM NEW MESSAGES 5 VIP 2 NEW CALLS 8 REC E F
. REPEAT (1) REVIEW (4)
(VOLUME)
(PLAY/STOP)
(PROGRAM)
(ERASE)
> SKIP (3)
(ANSWER ON/OFF) QUICK (6) Total number of new messages including messages from VIP registered callers Number of new messages from VIP registered callers to Phone Directory Display of remaining available recording time for messages When the whole bar changes into the black, the recording memory is full When you come home If (ANSWER ON/OFF) flashes in red and display on the base phone shows the number of new messages, press (PLAY/STOP) on the base phone or (HOLD/PLAY BACK) on the cordless handset. The machine plays back from the newest message received. VOL switch
(OFF)
> SKIP (3) QUICK (6)
. REPEAT (1) REVIEW (4)
(HOLD/PLAY BACK) A n s w e r i n g M a c h i n e F e a t u r e s
(ERASE) continued Answering Machine Features 63US Playing back messages (continued) Additional tasks when playing back messages To Do this Adjust the answering volume During playback, press (VOLUME) (+) or (-) on the base phone. Adjust the cordless handset volume Set the VOL switch on the cordless handset to H (high), M (middle) or L (low). Stop playback Skip to the next message Repeat the current message Press (PLAY/STOP) on the base phone or (OFF) on the cordless handset. Press > SKIP (3) while the current message is playing. Press . REPEAT (1) while the current message is playing. Go back to previous messages Press . REPEAT (1) within the first three seconds of the current message. Review playback Play back quickly Keep REVIEW (4) pressed during playback. Keep QUICK (6) pressed during playback. Notes The display shows the total number of new messages. Therefore, it is reset to 00 when you play back all new messages, even they are not erased yet. Be sure to erase unnecessary messages before the memory becomes full. Confirm the available time left for recording in the base display. The phone can record up to 128 messages including the greeting and memo. If a call comes in during playback, the playback stops. Tips You can also listen to the messages or erase the messages from a touch-tone phone (page 69). During playback of messages with Caller ID data, the name and phone number will appear on the display. If there is no name and phone number data, NO CALLER ID will appear on the display. During playback of memo, MEMO MESSAGE will appear on the display. 64US Answering Machine Features Erasing messages To erase the message one by one Press (ERASE) while the message is being played back. Your message has been erased. is announced and the message is erased. To erase the entire messages at once Entire message deletion can only be made on the base phone. Note that new messages that have not as yet been played back will also be erased. 1 Press (PROGRAM). 2 Turn Jog Dial to choose MEMORY MANAGE, and then 3 Turn Jog Dial to choose ERASE ALL MSG, and then press Jog Button. press Jog Button. 4 Turn Jog Dial to choose ERASE MESSAGES, and then press Jog Button. You hear a long confirmation beep, and the entire messages are erased. Note If a power interruption occurs or the AC power adaptor is disconnected while erasing a message, all recorded message may be erased. A n s w e r i n g M a c h i n e F e a t u r e s Answering Machine Features 65US Screening incoming calls You can screen calls by leaving the answering function on (see page 62) while you are at home. When a call is answered, you can hear the message being recorded through the base phone or cordless handset but the caller cannot hear you. Then, you can decide whether to answer the call or not. This function is available both the base phone and the cordless handset. However, the following procedures are required in order to screen incoming calls on the cordless handset.
(OFF)
(TALK) To screen incoming calls on the cordless handset Press (HOLD/PLAY BACK) while ANSWERING is displayed. CALL SCREENING appears on the display of the cordless handset. To answer the call Pick up the handset from the base phone or press (SPEAKERPHONE) on the base phone, or press (TALK) on the cordless handset. Recording is stopped and you can speak to the caller.
(SPEAKERPHONE) Notes If you press (HOLD/PLAY BACK) while the greeting is running, PLEASE WAIT will appear on the display, then once the message recording commences it will change to call screening status. If the answering volume is set to minimum, you cannot screen the calls on the base phone. Tips You can conclude call screening by pressing (OFF) on the cordless handset. You can also answer the call by picking up the handset on another phone if it is connected to the same line. 66US Answering Machine Features Recording a memo You can record a memo (up to four minutes) as a personal reminder or as a message for other people. You can play back the recorded memo like any incoming messages (see page 63). Memo recording is only available on the base phone. 1 Press (MEMO). Please record your memo message after the tone. is announced and you hear a long confirmation beep. 2 After the tone, start recording. Speak about 12 inches (30 cm) away from the microphone. 3 Press (MEMO) to stop recording. The message number in the display increases by one. MIC (Microphone) Notes If you press (MEMO) when the memory is full (available time for recording is displayed as running short), you hear five short error beeps and you cannot record a memo. If a call comes in while recording a memo, recording is canceled. Start over the procedure. If the remaining memory becomes full while recording, recording stops automatically. Tip If four minutes have passed in step 2, recording stops automatically, and the recorded memo is counted as a new message. A n s w e r i n g M a c h i n e F e a t u r e s Answering Machine Features 67US Operating from an outside phone You can call from a touch-tone phone and pick up new messages recorded on the phone. First, you just set the remote ID code (security code) and turn on the answering function before going out. The remote ID code (security code) setting can only be made on the base phone. Setting the remote ID code (security code) Jog Button 1 Press (PROGRAM). 2 Turn Jog Dial to choose ANSWER SETTINGS, and then press Jog Button. 3 Turn Jog Dial to choose SECURITY CODE, and then press Jog Button. 4 Enter four digits of remote ID code (security code) between 0000 and 9999 using the dialing keys. 5 Press (PROGRAM). The remote ID code (security code) is set, and you hear a long confirmation beep. Note Do not allow more than 20 seconds to elapse between each step of the procedure. Tips When you select [GO BACK], you can return to the previous set display by pressing Jog Button. You may press Jog Button instead of (PROGRAM) in step 5. To change the remote ID code (security code) Enter a new remote ID code (security code). The new code will replace the old one. Answering Machine Features 68US Picking up new messages 1 Call your phone from a touch-tone phone. 2 While you hear your greeting play, press (#), and your remote ID code (security code). You hear a long confirmation beep and the greeting stops. Following the voice guide informing you of the number of messages recorded, the phone stands by for you to enter a control code. 3 To do other operations, enter the control code within 20 seconds (see the table below). To quit, hang up the phone. Control codes for remote operations To Play back messages Press
(#) (2) Repeat the current message
(#) (1) while the message is being played back Skip the current message
(#) (3) while the message is being played back Erase the current message
(#) (9) while the message is being played back Erase all messages Record a new greeting
(up to one minute)
(#) (9)
(*) (7). When you hear a long beep, start recording your greeting. Press (*) (*) to stop recording. Turn on the answering function
(*) (0) Turn off the answering function
(#) (0) Stop the current operation
(*) (*) If you forgot to turn the answering function on Call your phone and let it ring 10 times until it answers. Then the answering function automatically turns on. Note If you enter a wrong remote security code three times, the line will be disconnected. To use the toll-saver feature Set RINGER TIMES to TOLL SAVER. See page 58 for details. A n s w e r i n g M a c h i n e F e a t u r e s Answering Machine Features 69US Caller ID Features Understanding the Caller ID service Caller ID allows the callers phone number to be shown on the display before you answer the call. In order to use this feature, you must first subscribe to Caller ID service. The name of this service may vary depending on your telephone company. To use this feature, be sure to enter your home area code (see page 15). When you receive a call The phone number appears on the display with the date and time as shown in the following example. If your Caller ID service includes the caller name service or if the phone number stored in one-touch dialing, or the Phone Directory matches with the Caller ID data phone number, the callers name also appears on the display (up to 15 letters). Callers name Callers phone number The date and time received NEW 01 SMITH JOHN 1-201-123-4567 7.04 4:53PM When you answer the call, the Caller ID display changes to the TALK or SPEAKERPHONE display. Notes The callers phone number and/or name will not appear in the following cases:
- OUT OF AREA: when the call is made through a telephone company which does not offer Caller ID service (including international calls).
- PRIVATE: when the call is blocked. For privacy reasons, many states allow callers the option to prevent his or her telephone data from being displayed on the other partys Caller ID display. If the call is from an office which uses multiple lines, the displayed phone number may not match the number you use to call the extension. About the memory match function If you receive a call from a VIP registered phone number on the base phone or the cordless handset which is stored on one of the ONE-TOUCH DIAL buttons (see page 39) or in the Phone Directory (see page 43), the ringer sound will change to a higher tone from the second ring. 9 will appear to the right of the displayed name. Note The memory match function does not work with OUT OF AREA or PRIVATE calls; and it may not work with calls made from an office which uses multiple lines because the number does not always match the one you stored in this phone. 70US Caller ID Features Looking at the Caller ID list The phone stores the data of the last 100 calls received including OUT OF AREA and PRIVATE calls. It keeps track of all calls received;
even if they were not answered. Viewing the Caller ID list You can look through the Caller ID list on both the base phone and the cordless handset to check the phone number and/or name of the calls received. Turn Press 1 Turn Jog Dial. The display shows the number of NEW CALLS (calls which you have not viewed) and OLD CALLS (calls which you have viewed) calls. CALLER ID NEW CALLS 08
OLD CALLS 12 2 Turn Jog dial down to display older data or up to display newer data. Notes If a 101st call is received, the oldest data is automatically erased. When you have checked all data, END OF LIST appears. Tips The number of NEW CALLS can be confirmed with the base display of the base phone. In addition, after playing back messages, a voice guide will provide notice in regards to new calls. When there are messages in the displayed Caller ID data, [MESSAGE] will appear at the very bottom of the display. See Playing back a message from the Caller ID list on page 76. C a l l e r I D F e a t u r e s continued Caller ID Features 71US Looking at the Caller ID list (continued) Erasing data from the Caller ID list Old data will be erased automatically when a 101st call comes in, but you can also manually erase unnecessary data one by one or erase the entire list. To erase the phone number one by one 1 Display the phone number you want to erase from the Caller ID list (see page 71). 2 Press Jog Dial. (If youre at the base phone, press Jog Button.) 3 Turn Jog Dial to choose ERASE CALLER ID, and then press Jog Dial (or Jog Button). NEW 01 SMITH JOHN 1-201-123-4567 7.04 4:53PM GO BACK DIAL LONG DISTANCE PROGRAM ERASE CALLER ID ERASE CALLER ID GO BACK NO YES 4 Turn Jog Dial to choose YES, and then press Jog Dial (or Jog Button). You hear a long confirmation beep and the data is erased. Note Do not allow more than 20 seconds to elapse between each step of the procedure. Tip When you select [GO BACK], you can return to the previous set display by pressing Jog Dial. (If youre at the base phone, press Jog Button.) 72US Caller ID Features
To erase the entire list at once Entire Caller ID list deletion can only be made on the base phone. Note that Caller ID data in the list that has not been viewed will also be erased. 1 Press (PROGRAM). 2 Turn Jog Dial to choose MEMORY MANAGE, and then press Jog Button. 3 Turn Jog Dial to choose ERASE ALL CID, and then press Jog Button. MEMORY MANAGE GO BACK SEND ALL DIR ERASE ALL CID ERASE ALL MSG ERASE ALL CID? GO BACK NO ERASE CALLER ID 4 Turn Jog Dial to choose ERASE CALLER ID, and then press Jog Button. You hear a long confirmation beep and the entire list is erased. Note Do not allow more than 20 seconds to elapse between each step of the procedure. Tip When you select [GO BACK], you can return to the previous set display by pressing Jog Button. C a l l e r I D F e a t u r e s Caller ID Features 73US
Using the Caller ID list By using the Caller ID list, you can call back a phone number from the Caller ID list easily, play back messages, or store numbers from the Caller ID list into the Phone Directory. Calling back a number from the Caller ID list 1 Display the phone number you want to call from the Caller ID list (see page 71). NEW 01 SMITH JOHN 1-201-123-4567 7.04 4:53PM 2 Press Jog Dial. (If youre at the base phone, press Jog Button.) GO BACK DIAL LONG DISTANCE PROGRAM ERASE CALLER ID 3 Turn Jog Dial to choose DIAL or LONG DISTANCE, and then press Jog Dial (or Jog Button). The phone automatically dials the displayed number. Turn Press
(TALK)
(LONG DIST. SAVER) 74US Caller ID Features Notes When the Long Distance service is set to ACTIVE, LONG DISTANCE can be selected in step 2 (see page 20). If the area code is not entered, PLEASE ENTER AREA CODE will appear on the display, and you will not be able to call back. Enter the area code (see page 15). Do not allow more than 20 seconds to elapse between each step of the procedure. If the number displayed in step 1 is not the one you should call back, you can change the number of digits of the phone number as described on page 78. If the phone is connected to a Private Branch Exchange (PBX), you may not be able to call back from the Caller ID list because an outside line access digit is necessary. Tips You may press (TALK) or (LONG DIST. SAVER) on the cordless handset (If youre at the base phone, pick up the handset from the base phone or press
(SPEAKERPHONE) or (LONG DIST. SAVER)) to make a call instead of doing steps 2 and 3. When you select [GO BACK], you can return to the previous set display by pressing Jog Dial. (If youre at the base phone, press Jog Button.) C a l l e r I D F e a t u r e s continued Caller ID Features 75US Using the Caller ID list (continued) Playing back a message from the Caller ID list When there is a message in the received Caller ID data, you can play back the message while continuing to display the Caller ID list. Turn Press
(HOLD/PLAY BACK) 1 Display the phone number you want to play back a message from the Caller ID list (see page 71). NEW 01 SMITH JOHN 1-201-123-4567 7.04 4:53PM MESSAGE
[MESSAGE] appears on the display. 2 Press Jog Dial. (If youre at the base phone, press Jog Button.) GO BACK DIAL LONG DISTANCE PLAY BACK PROGRAM 3 Turn Jog Dial to choose PLAY BACK, and then press Jog Dial
(or Jog Button). The message is played back. Note Do not allow more than 20 seconds to elapse between each step of the procedure. Tips When you select [GO BACK], you can return to the previous set display by pressing Jog Dial. (If youre at the base phone, press Jog Button.) Messages can be played back by pressing (PLAY/STOP) on the base phone or
(HOLD/PLAY BACK) on the cordless handset in step 1. 76US Caller ID Features Storing a number of the Caller ID list into the Phone Directory 1 Display the name and phone number you want to store from the Caller ID list (see page 71). 2 Confirm the number and press Jog Dial. (If youre at the base phone, press Jog Button.) 3 Turn Jog Dial to choose PROGRAM, and then press Jog Dial (or Jog Button). The cursor is at the right of the name. Enter or change the name, if necessary (see page 41). 4 Turn Jog Dial to choose [NUMBER], and then press Jog Dial (or Jog Button). The cursor is at the right of the phone number. Enter or change the phone number, if necessary
(see page 42). 5 Turn Jog Dial to choose [PGM], and then press Jog Dial (or Jog Button). You hear a long confirmation beep and the name and number are stored. NEW 01 SMITH JOHN 1-201-123-4567 7.04 4:53PM GO BACK DIAL LONG DISTANCE PROGRAM ERASE CALLER ID ENTER NAME
SMITH JOHN_ ABCDEFGHIJKLMNOP QRSTUVWXYZ SWITCH NUMBER
SMITH JOHN
12011234567_ 0123456789*# F P VIP PGM C a l l e r I D F e a t u r e s continued Caller ID Features 77US
Using the Caller ID list (continued) Notes If the area code is not entered, PLEASE ENTER AREA CODE will appear on the display, and you will not be able to store into the Phone Directory. Enter the area code. (see page 15) Do not allow more than 20 seconds to elapse between each step of the procedure. If the number displayed in step 1 is not the one you should store, you can change the number of digits of the phone number as described below. If the phone is connected to a Private Branch Exchange (PBX), you may need to add an outside line access digit
. Tips When you select [GO BACK], you can return to the previous set display by pressing Jog Dial. (If youre at the base phone, press Jog Button.) You may press (PROGRAM) instead of doing steps 4 and 5. To change the number of digits of the phone number If the number of digits of the phone number in the Caller ID list is different from the actual phone number, you need to adjust the number of digits of the phone number to call back or store into the Phone Directory. 1 While the phone number from the Caller ID list is displayed, press (#) repeatedly until the phone number with the correct number of digits appears on the display. Each time you press (#), the number of digits changes as follows:
When the home area code and the local area code do not match NEW 01 SMITH JOHN 1-201-123-4567 7.04 4:53PM NEW 01 SMITH JOHN 201-123-4567 7.04 4:53PM NEW 01 SMITH JOHN 123-4567 7.04 4:53PM NEW 01 SMITH JOHN 1-123-4567 7.04 4:53PM 78US Caller ID Features When the home area code matches NEW 01 SMITH JOHN 123-4567 7.04 4:53PM NEW 01 SMITH JOHN 1-201-123-4567 7.04 4:53PM NEW 01 SMITH JOHN 1-123-4567 7.04 4:53PM NEW 01 SMITH JOHN 201-123-4567 7.04 4:53PM When the local area code matches NEW 01 SMITH JOHN 201-123-4567 7.04 4:53PM NEW 01 SMITH JOHN 1-123-4567 7.04 4:53PM NEW 01 SMITH JOHN 1-201-123-4567 7.04 4:53PM NEW 01 SMITH JOHN 123-4567 7.04 4:53PM 2 Continue the operation to call or store the phone number with the correct number of digits (pages 74 and 77). Notes You need to adjust the number of digits each time you call back from the Caller ID list as the changes to the Caller ID data is not stored in memory. You may not be able to change the number of digits depending on the Caller ID data. C a l l e r I D F e a t u r e s Caller ID Features 79US Using Caller ID with call waiting service This telephone is compatible with the Caller ID with call waiting service. Make sure that your telephone company offers this service. Like the basic Caller ID service, you need to subscribe to Caller ID with call waiting in order to use this service. Even though you may have already subscribed to Caller ID and call waiting as two separate services, you need to request a subscription to Caller ID with call waiting as a single service. This is a new service that combines the two services. Even though you now have a Caller ID with call waiting compatible phone, unless you subscribe to the combined Caller ID with call waiting service, you will not be able to see the name and number of the second caller. When a new call comes in while you are talking, the callers name and/or phone number of the new call appears on the display for about 20 seconds. To switch to another caller 1 To switch to the new caller, press (CALL WAITING/FLASH). 2 To switch back to the first caller, press (CALL WAITING/FLASH) again. Tip When the Caller ID with call waiting service is set to INACTIVE, you cannot use this service even if you have subscribed to Caller ID with call waiting service (see page 19). 80US Caller ID Features Additional Information Mounting the base phone on a wall 1 Reverse the hang-up tab. 2 Plug the telephone line cord to Hang-up tab 1 the LINE jack and the AC power adaptor to the DC IN 11V jack, and hook the cords. Use the shorter cord for mounting. 2 AC power adaptor cord Telephone line cord 3 1 2 Wall bracket 4, 5 Wall plate AC outlet Tip To remove the wall bracket, press the lower tabs. 3 Attach the wall bracket to the center of the base phone. Align the f marks of the wall bracket with those of the base phone. 4 Plug the telephone line cord to the telephone outlet, and hook the base phone to the wall plate. 5 Plug the AC power adaptor to an AC outlet. Then raise the antenna so that it points towards the ceiling. Telephone line cord AC power adaptor A d d i t i o n a l I n f o r m a t i o n Additional Information 81US Carrying the cordless handset by the belt clip You can hang the cordless handset on the belt by attaching the belt clip to the cordless handset. Attaching the belt clip Press the belt clip to the cordless handset. Make sure that the side tabs click and go into the holes on the sides of the cordless handset. Note To prevent the cordless handset from dropping, make sure that each tab is completely inserted. Detaching the belt clip While pressing the back of the belt clip, pull the sides one by one until the tabs come off from the holes. Note Remove the belt clip carefully to avoid breaking your fingernails. 82US Additional Information Using the headset You can talk on the cordless handset without using your hands by connecting a headset (optional) to the I (HEADSET) jack on the cordless handset. I (HEADSET) jack A d d i t i o n a l I n f o r m a t i o n Additional Information 83US Notes on power sources On battery pack Store the battery pack at a temperature between 41F (5C) and 95F (35C) for best performance. If you do not use the cordless handset for a long period of time, remove the battery pack after charging for more than 12 hours. On power failure During a power interruption, you cannot make or receive calls, and you cannot use the answering machine. For the customers in the USA RECYCLING NICKEL-CADMIUM BATTERIES Nickel-Cadmium batteries are recyclable. You can help preserve our environment by returning your unwanted batteries to your nearest point for collection, recycling or proper disposal. Note:
In some areas the disposal of nickel-
cadmium batteries in household or business trash may be prohibited. RBRC (Rechargeable Battery Recycling Corporation) advises you about spent battery collection by the following phone number. Call toll free number: 1-800-822-8837
(United States and Canada only) Caution: Do not handle damaged or leaking nickel-cadmium batteries. 84US Additional Information Maintenance Clean the cabinets with a soft cloth slightly moistened with water or a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine as they may damage the finish of the cabinet. If the charge terminals of the charger and cordless handset are soiled, wipe them with a soft cloth. If you have any questions or problems concerning your phone, please consult your nearest Sony dealer. A d d i t i o n a l I n f o r m a t i o n Additional Information 85US Troubleshooting If youve experienced any of the following difficulties while using your phone, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer. Symptom Remedy s l l a c g n k a M i r e v a S e c n a t s i D g n o L You hear five short error beeps when you press (TALK). You hear no dial tone. The phone does not connect at all, even though the number you dial is correct. The phone does not redial correctly. Make sure you have set up the base phone correctly
(page 10). Move the cordless handset closer to the base phone. Make sure the telephone line cord is securely connected to the telephone outlet. Make sure the battery is fully charged (page 13). Make sure the dialing mode is set correctly (page 12). Make sure the dialed number is really the one you want to dial. You cannot hear anything from the speakerphone. During phone conversation, press (VOLUME)(+) on the base phone to increase the speakerphone volume.
(LONG DIST. SAVER) does not dial out. Although the Long Distance Saver function is set to ACTIVE, no access number is dialed. Even by pressing
(LONG DIST. SAVER) , the long distance call is not being made through the service provider of the registered access number. Make sure that the Long Distance Saver function is set to ACTIVE and the registered access number is correct (page 20). Make sure that the registered access number is correct
(page 20). Make sure that the registered access number is correct and if the service provider needs any registration beforehand. Make sure the display shows [LONG DISTANCE]
when pressing (LONG DIST. SAVER) once, as the function is cancelled when pressing
(LONG DIST. SAVER) a second time ([LONG DISTANCE] disappears from the display). 86US Additional Information s l l a c g n v i i e c e R n o i t a s r e v n o c g n i r u D
g n i l i a d h c u o t
e n O y r o t c e r i D e n o h P m o c r e t n I Symptom The cordless handset does not ring. The base phone does not ring. You hear interference during conversation. You hear a beep every second during a conversation and appears on the display. You hear a beep twice per second and BATTERY LOW appears on the display. You hear five short error beeps and cannot store a number on a one-touch dial or in the Phone Directory. You hear five short error beeps when you try to make a one-
touch dial call. One-touch dialing or Phone Directory dialing is incorrect. The cordless handset does not ring when you use the intercom from the base phone, and the base phone does not ring when you use the intercom from the cordless handset. When pressing (INTERCOM) on the cordless handset, you hear a busy tone and cannot make an intercom call. Remedy Set the RING switch on the cordless handset to ON. The battery may be weak. Charge the battery for more than 12 hours (page 13). Make sure you have set up the base phone correctly
(page 10). Move the cordless handset closer to the base phone. Press (VOLUME)(+) on the base phone to increase the ringer volume. Make sure the telephone line cord is securely connected to the telephone outlet. Move the cordless handset closer to the base phone. Place the base phone away from noise sources
(page 10). This is the out-of-range alarm. Move the cordless handset closer to the base phone within 30 seconds. The battery is weak. Charge the battery for more than 12 hours (page 13). Make sure you follow the procedure for storing the number correctly (pages 39, 43). You have pressed a one-touch dialing button on which no phone number has been stored. Store the correct number (pages 39, 43). The battery may be week. Charge the battery for more than 12 hours (page 13). Move the cordless handset closer to the base phone. Place the base phone away from noise sources
(page 10). The base phone is being used to converse with an outside caller. A d d i t i o n a l I n f o r m a t i o n continued Additional Information 87US Troubleshooting (continued) Symptom Remedy You cannot hear anything from the speaker. During playback, press (VOLUME)(+) on the base phone to increase the answering volume. No time stamp is heard. You cannot record the greeting properly. The phone does not record messages. Make sure the day and time are set (page 22). The day and time may have been cleared due to a power interruption. Set them again (page 22). Keep your message between two seconds and one minute. Make sure you speak about 12 inches (30 cm) away from the microphone when recording. Check the answering mode. The phone cannot record messages in announcement only mode (page 60). Make sure that the memory is not full. When the remaining recording area is less than one minute, the phone switches to announcement only mode automatically. The phone does not record a message that is shorter than two seconds. Even if the message is longer than four minutes, the phone only records up to four minutes. The phone does not accept your remote ID code (security code). Make sure you call from a touch-tone phone. Make sure you entered your remote ID code (security code) within two seconds after you have entered (#). You hear error beeps when you enter your remote ID code
(security code). A long confirmation beep does not sound when you enter your remote ID code (security code). Make sure the remote ID code (security code) is correct. Enter your remote ID code (security code) while the greeting is being played back. Make sure you are calling from a touch-tone phone. i e n h c a m g n i r e w s n A n a m o r f g n i t a r e p O e n o h p e d i s t u o 88US Additional Information Symptom Remedy The callers name and/or phone number does not appear on the display. The callers name and/or phone number does not appear on the display during call waiting. D I r e l l a C You cannot dial the number from the Caller ID list. The memory match function does not work. Make sure you have subscribed to Caller ID service. Caller ID service may not work when the phone is connected to a Private Branch Exchange (PBX). The call is made through company which does not offer Caller ID service. OUT OF AREA will appear on the display. The call was blocked. PRIVATE will appear on the display. You have answered the call while ** RINGING **
was displayed. Be sure to answer after the Caller ID data is displayed. Make sure you have subscribed to Caller ID with call waiting service (page 80). Make sure the Caller ID with call waiting service is set to ACTIVE (page 19). Make sure nobody is talking with another phone on the same telephone line. Make sure you entered your area code correctly
(page 15). You may need to change the number of digits of the phone number (page 78). This function may not work when the phone is connected to a Private Branch Exchange (PBX). If the call is from an office which uses multiple lines, the phone number may not match the number you put in the memory. If you have the VIP registered phone number with an outside line access digit on a one-touch dial or in the Phone Directory because the phone is connected to a Private Branch Exchange (PBX), the phone number will not match the Caller ID data. If you have the VIP registered phone number of less than 7 digits on a one-touch dial or in the Phone Directory, the phone number will not match the Caller ID data. A d d i t i o n a l I n f o r m a t i o n continued Additional Information 89US Troubleshooting (continued) Symptom Remedy Wipe the charge terminals of the charger and the cordless handset with a soft cloth for better contact of the charge terminals. Make sure the cordless handset is placed on the charger properly. Make sure the cordless handset is placed on the charger with front side facing forward. The battery pack was charged less than 12 hours (due The usage life of the battery has expired and needs to power failure, etc.). replacement. The CHARGE lamp on the charger does not light up when you place the cordless handset to charge. The battery duration is short. y r e t t a b
e c r u o s r e w o P 90US Additional Information Specifications General Spread method Direct-Sequence Spread-Spectrum Access method FDMA-TDD Frequency band 902 - 928 MHz Operating channel 23 channels Dial signal Tone, 10 PPS (pulse) selectable Supplied accessories See page 9. Cordless handset Power source Rechargeable battery pack BP-T24 Battery life Standby: Approx. 7 days Talk:
Approx. 5 hours Battery charging time Approx. 12 hours Dimensions Approx. 58 x 185.4 x 48 mm (w/h/d), antenna excluded
(approx. 2 38 x 7 38 x 1 1516 inches) Antenna: Approx. 72 mm
(approx. 2 78 inches) Mass Approx. 260 g
(approx. 9.2 oz), battery included Base phone Power source DC 11V from AC power adaptor AC-T107 Dimensions Approx. 175 x 60 x 214 mm (w/h/d), antenna excluded
(approx. 7 x 2 38 x 8 12 inches) Antenna: Approx. 112 mm
(approx. 4 1 2 inches) Mass Approx. 580 g
(approx. 1 lb 4 oz), wall bracket excluded Charger Power source DC 6V from AC power adaptor Dimensions Approx. 72.5 x 60 x 85 mm (w/h/d)
(approx. 2 7 8 x 2 38 x 3 38 inches) Mass Approx. 204 g (approx. 7.2 oz) Answering machine Maximum recording time About 20 minutes (at NORM (LONG PLAY) recording quality), using incorporated IC Greeting message Up to one minute Incoming message Up to 4 minutes/message Memo Up to 4 minutes/message Design and specifications are subject to change without notice. A d d i t i o n a l I n f o r m a t i o n Additional Information 91US Index A Adjusting volume answering 55, 64 cordless handset volume 29, 36 handset volume 32, 37 speakerphone volume 32, 37 Announcement only 60 Answering machine turning on 62 Area code 15 Audible indicate 60 B Battery pack charging 13 duration 14 C Call waiting service 29, 36 Caller ID 70 Caller ID list 71 calling back 74 memory match function 70 playing back a message from the Caller ID list 76 storing in Phone Directory 77 Caller ID with call waiting 19, 80 Carrying the cordless handset by the belt clip 82 Connection 11 Control codes for remote operations 69 D Day and time stamp 22 Dialing mode choosing 12 switching to the tone temporarily 29 Directory Phone Directory 43 E, F Erasing Caller ID data 72 phone numbers dialed 34 messages 65 Phone Directory 45 G Greeting 56 H Headset 28, 35, 83 Hold 29, 36 Home area code 15 I, J, K Identifying the parts 24 Intercom 51 L Local area code 17 Location, base phone 10 Long Distance call 20, 29 M, N Making calls 28 Memo 67 Memory match function 70 Messages 63 Mounting the base phone on a wall 81 O One-touch dialing 39 Operating from an outside phone 68 OUT OF AREA 70 P, Q Package contents 9 Playing back a message from the Caller ID list 76 Phone Directory 43 Playing announcement only 60 messages 63, 76 PRIVATE 70 Pulse dialing 12 R Recording greeting 56 memo 67 Recording quality 59 Receiving calls 35 Redialing 33 Remote ID code
(security code) 68 Ringer RING switch 36 92US Additional Information S Screening calls 66 Setting up the phone services 19 Setting up base phone 10 cordless handset 13 Speakerphone 32 Stamping messages with day and time 22 Storing Caller ID data in Phone Directory 77 Switching phones during a call 50 T, U Toll-saver feature 58 Talking between the phones 51 Tone dialing dialing mode 12 switching to 29 Transferring a call 53 Troubleshooting 86 V, W, X, Y, Z Volume answering 55, 64 cordless handset 29, 36 handset 32, 37 speakerphone 32, 37 A d d i t i o n a l I n f o r m a t i o n Additional Information 93US For the customers in the USA Be sure to save the receipt and attach it to your WARRANTY card when having your equipment repaired at an authorized Sony service station. Sony Corporation Printed in Taiwan, R.O.C.
This product uses the FCC Data API but is not endorsed or certified by the FCC