AV Center User Manual 1

 

A V C e n e r t M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US+00COV-U.fm masterpage:Right 01US+00COV-U.fm Page 1 Friday, June 15, 2012 2:55 PM 4-422-720-11(1) This HD Radio receiver enables:

Operating Instructions Mode demploi Manual de instrucciones GB FR ES AV Center Owners Record The model and serial numbers are located on the bottom of the unit. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. XAV-701HD Serial No. XAV-701HD 2012 Sony Corporation XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US01INT-U.fm masterpage:Left 00US+00COV-U.book Page 2 Friday, June 15, 2012 2:52 PM Be sure to install this unit in the dashboard of the car for safety. For installation and connections, refer to the supplied Installation/Connections guide. Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. CAUTION The use of optical instruments with this product will increase eye hazard. As the laser beam used in this CD/DVD player is harmful to eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only. FOR UNITED STATES CUSTOMERS. NOT APPLICABLE IN CANADA, INCLUDING IN THE PROVINCE OF QUEBEC. POUR LES CONSOMMATEURS AUX TATS-UNIS. NON APPLICABLE AU CANADA, Y COMPRIS LA PROVINCE DE QUBEC. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. 2 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US01INT-U.fm masterpage:Right 00US+00COV-U.book Page 3 Friday, June 15, 2012 2:52 PM This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power

(e.i.r.p.) is not more than that necessary for successful communication. This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency

(RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency

(RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20 cm or more away from persons body (excluding extremities: hands, wrists, feet and ankles). For the State of California, USA only Perchlorate Material special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate Perchlorate Material: Lithium battery contains perchlorate Warning if your cars ignition has no ACC position Be sure to set the Auto Off function

(page 51). The unit will turn off automatically in the set time when no source is selected, which prevents battery drainage. If you do not set the Auto Off function, press and hold (SOURCE/OFF) until the display disappears each time you turn the ignition off. To cancel the demonstration (Demo) display, see page 51. 3 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US+00COV-UTOC.fm masterpage:Left 00US+00COV-U.book Page 4 Friday, June 15, 2012 2:52 PM Table of Contents Notes on safety . 7 Notes on installation. 7 Copyrights . 7 Notes on Bluetooth function . 9 Notice on license . 10 Playable discs and file types . 11 Location and function of controls . 12 Main unit . 12 RM-X271 Remote Commander . 14 Getting Started Resetting the unit . 15 Performing initial settings . 15 Setting the clock . 16 Preparing the remote commander . 16 Radio Listening to the radio . 17 Reception controls . 17 Reception indications . 18 Storing and receiving stations . 18 Storing automatically BTM . 18 Storing manually . 18 Receiving stored stations. 18 About FM Multicasting . 18 iTunes Tagging. 18 Using iTunes Tagging . 19 Discs Playing discs. 20 Playback controls. 20 Playback indications . 21 Using PBC (playback control) functions . 22 Configuring audio settings . 22 Changing the audio language/format. 22 Changing the audio channel . 23 Adjusting the audio output level Dolby D level . 23 Repeat and shuffle play . 23 Direct search play. 24 4 Listing up tracks/video files List . 25 Selecting a track/video file . 25 Selecting a file type. 25 USB Music Playing music . 25 Playback controls . 25 Options . 26 Repeat and shuffle play . 26 Selecting music files . 26 Selecting songs from the library . 26 Enjoying music according to your mood SensMe . 26 Installing Media Go to your computer . 26 Transferring tracks to the USB device using Media Go. 26 Playing tracks in channels SensMe channels . 27 Selecting an album by cover art . 28 Options . 28 USB Video Playing video . 28 Playback controls . 28 Options . 29 Selecting video files . 29 Options . 29 USB Photo Viewing Photos . 30 Playback controls . 30 Options . 30 Selecting photo files . 31 Options . 31 Notes on USB playback XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US+00COV-UTOC.fm masterpage:Right 00US+00COV-U.book Page 5 Friday, June 15, 2012 2:52 PM iPod Playing an iPod . 32 Listing up tracks/video files List . 33 Selecting a track/video file . 33 Selecting a file type. 33 Selecting the play mode. 33 Repeat and shuffle play . 33 Operating an iPod directly Passenger App Control . 34 Useful Functions Searching for a track by listening to track passages ZAPPIN . 34 Controlling applications on your smartphone MirrorLink . 35 Controlling applications on your iPhone Telenav GPS App. 35 Enjoying different sources in front and rear Zone Zone . 35 Changing the color of buttons Dynamic Color Illuminator . 35 Customizing the button color Custom Color . 36 Using Gesture Command . 36 Handsfree Calling and Audio Streaming Bluetooth function Before using the Bluetooth function . 37 Basic procedure of the Bluetooth function . 37 Bluetooth status indications . 37 Installing the microphone . 37 Pairing . 38 Searching from the Bluetooth device . 38 Connecting. 38 Handsfree calling. 39 Making calls . 39 Receiving calls . 40 Operations during a call . 40 Phonebook management . 41 Selecting phonebook data . 41 Browsing a phonebook . 41 Deleting phonebook data . 41 Call data management . 42 Deleting call history . 42 Preset dial . 42 Phone option menu . 42 Audio streaming . 43 Listening to a Bluetooth device via this unit. 43 Operating a Bluetooth device with this unit. 43 General Settings about Bluetooth . 43 Pandora internet radio Streaming Pandora . 44 To connect the mobile device via the Bluetooth function . 44 To connect the iPhone . 44 Thumbs feedback . 44 Station list. 44 Bookmarking . 44 Creating a Station. 45 Deleting a Station. 45 Sound Adjustment Selecting the sound quality EQ7 . 45 Customizing the equalizer curve EQ7 Tune . 45 Adjusting the sound characteristics . 46 Optimizing sound for the listening position Intelligent Time Alignment . 46 Calibrating the listening position Intelligent Time Alignment Tune . 47 Speaker configuration and volume setup . 47 Creating a virtual center speaker CSO . 47 Using rear speakers like subwoofers Rear Bass Enhancer. 47 Adjusting the speaker volume . 48 Monitor Adjustment Adjusting the monitor angle . 48 Touch panel calibration . 48 Adjusting the picture Picture EQ . 48 Customizing the picture . 49 Selecting the aspect ratio . 49 Settings Basic setting operation . 50 General Settings . 51 Sound Settings . 53 5 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US+00COV-UTOC.fm masterpage:Left 00US+00COV-U.book Page 6 Friday, June 15, 2012 2:52 PM Visual Settings . 55 Source Settings. 56 Using Optional Equipment Auxiliary audio/video equipment. 58 SiriusXM Connect Tuner . 58 Rear view camera . 59 Rear view camera settings . 59 Additional Information Precautions . 60 Notes on LCD panel . 60 Notes on discs . 60 Playback order of MP3/WMA/AAC/Xvid/

MPEG-4 files. 61 About iPod. 63 About Bluetooth function . 63 Maintenance . 64 Removing the unit . 64 Specifications . 65 Troubleshooting . 66 Error displays/messages . 69 Language code list . 73 6 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 7 Friday, June 15, 2012 2:52 PM Notes on safety Notes on installation Comply with your local traffic rules, laws and regulations. While driving Do not watch or operate the unit, as it may lead to distraction and cause an accident. Park your car in a safe place to watch or operate the unit. Do not use the setup feature or any other function which could divert your attention from the road. When backing up your car, be sure to look back and watch the surroundings carefully for your safety, even if the rear view camera is connected. Do not depend on the rear view camera exclusively. While operating Do not insert your hands, fingers or foreign object into the unit, as it may cause injury or damage to the unit. Keep small articles out of the reach of children. Be sure to fasten seatbelts to avoid injury in the event of a sudden movement of the car. Preventing an accident Pictures appear only after you park the car and set the parking brake. If the car starts moving during video playback, the picture is automatically switched to the background screen after displaying the caution below. Video blocked for your safety. The monitor connected to the REAR OUT is active while the car is in motion. The picture on the display is switched to the background screen, but audio source can be heard. Do not operate the unit or watch the monitor while driving. We recommend this unit should be installed by a qualified technician or service personnel. If you try to install this unit by yourself, refer to the supplied Installation/Connections guide and install the unit properly. Improper installation may cause battery drain or a short circuit. If the unit does not work properly, check the connections first, referring to the supplied Installation/Connections guide. If everything is in order, check the fuse. Protect the unit surface from damage. Do not expose the unit surface to chemicals, such as insecticide, hair spray, insect repellent, etc. Do not leave rubber or plastic materials in contact with the unit for a long time. Otherwise, the finish of the unit may be impaired, or deformation may occur. When installing, be sure to fix securely. When installing, be sure to turn the ignition off. Installing the unit with the ignition on may cause battery drain or a short circuit. When installing, be sure not to damage any car parts such as pipes, tubes, fuel tank or wiring by using a drill, as it may cause a fire or an accident. Copyrights Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Microsoft, Windows, Windows Vista and Windows Media and logos are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution of this technology outside of this product is prohibited without the appropriate license(s) from Microsoft. DVD VIDEO, DVD-R, DVD-RW, DVD+R, and DVD+RW are trademarks. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners. 7 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 8 Friday, June 15, 2012 2:52 PM ZAPPIN is a trademark of Sony Corporation. 12 TONE ANALYSIS and its logo are trademarks of Sony Corporation. WALKMAN and WALKMAN logo are registered trademarks of Sony Corporation. SensMe and the SensMe logo are trademarks or registered trademarks of Sony Ericsson Mobile Communications AB. Music recognition technology and related data are provided by Gracenote. Gracenote is the industry standard in music recognition technology and related content delivery. For more information, please visit www.gracenote.com. CD, DVD, Blu-ray Disc, and music and video-

related data from Gracenote, Inc., copyright 2000 to present Gracenote. Gracenote Software, copyright 2000 to present Gracenote. One or more patents owned by Gracenote apply to this product and service. See the Gracenote website for a non-exhaustive list of applicable Gracenote patents. Gracenote, CDDB, MusicID, MediaVOCS, the Gracenote logo and logotype, and the Powered by Gracenote logo are either registered trademarks or trademarks of Gracenote in the United States and/or other countries. iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. Apple, Macintosh and iTunes are trademarks of Apple Inc., registered in the U.S. and other countries. MirrorLink and the MirrorLink Logo are certification marks of the Car Connectivity Consortium LLC. Unauthorized use is strictly prohibited. 8 THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-

COMMERCIAL USE OF A CONSUMER FOR DECODING MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE HTTP://WWW.MPEGLA.COM THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO

(i)ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (AVC VIDEO) AND/OR

(ii)DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE AND VC-1 PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO DECODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (AVC VIDEO) AND/OR THE VC-1 STANDARD (VC-1 VIDEO) THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NONCOMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO AND/OR VC-1 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM Pandora, the Pandora logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc., used with permission. XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 9 Friday, June 15, 2012 2:52 PM Android is a trademark of Google Inc. Use of this trademark is subject to Google Permissions. BlackBerry is the property of Research In Motion Limited and is registered and/or used in the U.S. and countries around the world. Used under license from Research In Motion Limited. SiriusXM subscriptions and Connect Tuner are sold separately. www.siriusxm.com. Sirius, XM and all related marks and logos are trademarks of Sirius XM Radio Inc. and its subsidiaries. All other marks and logos are the property of their respective owners. All rights reserved. HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign Patents. HD Radio and the HD, HD Radio, and Arc logos are proprietary trademarks of iBiquity Digital Corp. Telenav and Telenav logo are registered trademark or trademark of Telenav, Inc. All other trademarks are trademarks of their respective owners. This product uses NCM driver software which is licensed to Sony by MCCI corporation. Notes on Bluetooth function Caution IN NO EVENT SHALL SONY BE LIABLE FOR ANY INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR OTHER DAMAGES INCLUDING, WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF DATA, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, DOWNTIME, AND PURCHASERS TIME RELATED TO OR ARISING OUT OF THE USE OF THIS PRODUCT, ITS HARDWARE AND/OR ITS SOFTWARE. IMPORTANT NOTICE!

Safe and efficient use Changes or modifications to this unit not expressly approved by Sony may void the users authority to operate the equipment. Please check for exceptions, due to national requirement or limitations, in usage of Bluetooth equipment before using this product. Driving Check the laws and regulations on the use of cellular phones and handsfree equipment in the areas where you drive. Always give full attention to driving and pull off the road and park before making or answering a call if driving conditions so require. Connecting to other devices When connecting to any other device, please read its user guide for detailed safety instructions. Radio frequency exposure RF signals may affect improperly installed or inadequately shielded electronic systems in cars, such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems or air bag systems. For installation or service of this device, please consult with the manufacturer or its representative of your car. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to this device. Consult with the manufacturer of your car to ensure that the use of your cellular phone in the car will not affect its electronic system. Check regularly that all wireless device equipment in your car is mounted and operating properly. Emergency calls This Bluetooth car handsfree and the electronic device connected to the handsfree operate using radio signals, cellular, and landline networks as well as user-programmed function, which cannot guarantee connection under all conditions. Therefore do not rely solely upon any electronic device for essential communications (such as medical emergencies). Remember, in order to make or receive calls, the handsfree and the electronic device connected to the handsfree must be switched on in a service area with adequate cellular signal strength. Emergency calls may not be possible on all cellular phone networks or when certain network services and/or phone features are in use. Check with your local service provider. 9 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 10 Friday, June 15, 2012 2:52 PM Notice on license This product contains software that Sony uses under a licensing agreement with the owner of its copyright. We are obligated to announce the contents of the agreement to customers under requirement by the owner of copyright for the software. For details on software licenses, see page 52. Notice on GNU GPL/LGPL applied software This product contains software that is subject to the following GNU General Public License

(hereinafter referred to as GPL) or GNU Lesser General Public License (hereinafter referred to as LGPL). These establish that customers have the right to acquire, modify, and redistribute the source code of said software in accordance with the terms of the GPL or LGPL displayed on this unit. The source code for the above-listed software is available on the Web. To download, please access the following URL then select the model name XAV-701HD. URL: http://www.sony.net/Products/Linux/

Please note that Sony cannot answer or respond to any inquiries regarding the content of the source code. 10 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 11 Friday, June 15, 2012 2:52 PM Playable discs and file types This unit can play various video/audio discs. The following chart helps you to check if a disc is supported by this unit, as well as what functions are available for a given disc type. Disc symbol in manual O E D V I I O D U A Disc format DVD VIDEO DVD-R*1/DVD-R DL*1/DVD-RW*1

(Video mode/VR mode) DVD+R*1/DVD+R DL*1/DVD+RW*1 Video CD

(Ver. 1.0/1.1/2.0) Audio CD CD-ROM*2/CD-R*2/CD-RW*2

*1 Audio files can also be stored.

*2 Video files can also be stored. Note DVD may be used in these Operating Instructions as a general term for DVD VIDEOs, DVD-Rs/DVD-RWs, and DVD+Rs/DVD+RWs. The following chart shows the supported file types and their symbols. Available functions differ depending on the format, regardless of disc type. The format symbols below appear in these Operating Instructions next to the description of functions available for their corresponding file types. Format symbol in manual MPEG-4 File type MP3 audio file WMA audio file AAC audio file WAVE audio file Xvid video file WMV video file MPEG-4 video file Tip For details on compression formats, see page 61. Note Even compatible discs may not be playable on this unit, depending on their recording condition. AVC (H.264 baseline) video file 11 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 12 Friday, June 15, 2012 2:52 PM Location and function of controls Main unit 5 For details, see the pages listed below. H SOURCE/OFF button Press to turn on the power/change the source:

Tuner (HD Radio), Telenav, Pandora, MirrorLink, SXM,*2 iPod, USB Music, USB Video, Disc, BT Audio

(Bluetooth Audio), AUX (Auxiliary equipment). Press and hold for 1 second to exit the source. Press and hold for more than 2 seconds to turn off. I Z (Eject) TILT button page 20, 48 Press and hold to adjust the monitor angle.

*1 There is a tactile dot to the right of the VOL +

button.

*2 If a SAT tuner is connected, the connected device

(SXM) will active on the display. A Disc slot page 20

(located behind the front panel) B VOL (Volume) /+*1 buttons C DSPL/M.OFF button Press to change display items. Press and hold to turn off the monitor and the button illumination. To turn back on, touch anywhere on the display. D Reset button page 15 E Display/touch panel F Receptor for the remote commander G HOME/ATT button Press to open HOME menu. Press and hold to attenuate the sound. 12 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 13 Friday, June 15, 2012 2:52 PM Screen displays Indication list:

Home Screen:

A ATT (Attenuate) B ZONE ZONE C TAG D Bluetooth status indications page 37 E Clock page 16 F ZONE ZONE key Touch to activate Zone Zone. G Option key Touch to open HOME Option menu. The items in the Home Option menu are as follows:

Icon Priority Displays the icon depending on the frequency of use: Default, Frequency Used. Background Theme*1 Changes the Background Theme:

Default, User. Icon View Changes the display of icons: 2D Mode, 3D Mode.*2 Touch Effect Displays a light trail where you have touched the display: ON, OFF. To return to the Home screen, touch

. H Source select keys Touch to change the source:

Tuner (HD Radio), Telenav, Pandora, MirrorLink, SXM,*3 Phone, iPod, USB Music, USB Video, USB Photo, Disc, BT Audio, Navigation,*4 Rear Camera, AUX (Auxiliary equipment), Settings.

*1 Available after setting a photo file as a wallpaper while the USB Photo source is selected.

*2 Select 2D/3D Mode to display icons in 2D/3D. In 3D Mode, you can operate by drawing icons back and forth.

*3 If a SAT tuner is connected, the connected device

(SXM) will active on the display.

*4 If the navigation module (not supplied) is connected, the Navigation source icon on the Home screen becomes active. Tip Touch and hold anywhere on the screen to display the menu item list. 13 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 14 Friday, June 15, 2012 2:52 PM RM-X271 Remote Commander The remote commander can be used to operate the audio controls. For menu operations, use the touch panel. For details, see the pages listed below. Remove the insulation film before use

(page 16). A OFF button Press to exit the source/stop the source. Press and hold to turn off. B DSPL button Press to change display items. C MONITOR OFF button Press to turn off the monitor and the button illumination. To turn back on, press again. D POSITION button Press to switch the listening position (Front L/Front R/Front/All/Custom/

OFF). E O (Return) button Press to return to the previous display/return to the menu on a VCD*1. 14 F EQ (Equalizer) button Press to select an equalizer curve from 7 music types (Xplod/Vocal/Edge/

Cruise/Space/Gravity/Custom/

OFF). G Number buttons page 24 Tuner:

Press to receive stored stations. Press and hold to store stations. Disc:

Press to locate a title/chapter/track. H CLEAR button Press to delete an entered number. I ZZ (Zone Zone) button page 35 Press to activate Zone Zone. J ATT (Attenuate) button Press to attenuate the sound. To cancel, press again. K u (Play/Pause) button L .m/M> buttons Tuner/SXM:

Press to tune to stations automatically. Press and hold to find a station manually. Press to search the stored contents automatically (SXM). Disc*2/USB/iPod:

Press to skip a chapter/track/scene/file. Press and hold momentarily to reverse/

fast-forward video. Press and hold to reverse/fast-forward a track. Bluetooth Audio*3:

Press to skip a track. Press and hold to reverse/fast-forward a track. Pandora:

Press to skip a track. M DVD playback setting buttons Press to change the audio language/format.

(For a VCD, to change the audio channel.)

(AUDIO):

(SUBTITLE):

(ANGLE):

(TOP MENU):

(MENU):

Press to change the subtitle language. Press to change the viewing angle. Press to open the top menu on a DVD. Press to open the menu on a disc. XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 15 Friday, June 15, 2012 2:52 PM N ZAP button Press to enter ZAPPIN mode. O </M/m/, (Cursor)/ENTER buttons page 18, 20 Tuner/SXM:

Press to tune to stations automatically. Press and hold to find a station manually. Disc(DVD):

Press to control the menu on a DVD. P SRC (Source) button Press to turn on/change the source: Tuner

(HD Radio), Telenav, Pandora, MirrorLink, SXM, iPod, USB Music, USB Video, Disc, BT Audio

(Bluetooth Audio), AUX (Auxiliary equipment). Q MODE button Press to select the radio band (FM/AM)/

select an auxiliary device (AUX1/AUX2)*4. Getting Started Resetting the unit Before operating the unit for the first time, or after replacing the car battery or changing the connections, you must reset the unit. Press the reset button (page 12) with a pointed object, such as a ballpoint pen. Note Pressing the reset button will erase the clock setting and some stored contents. Performing initial settings After resetting, the display for the initial settings appears. R VOL (Volume) +/ buttons

*1 When playing with PBC functions.

*2 Operation differs depending on the disc (page 21).

*3 Operation differs depending on the connected Bluetooth device.

*4 When two auxiliary devices are used. Note The remote commander will not operate when the unit is turned off and the display has disappeared. Press

(SOURCE/OFF) on the main unit, or insert a disc to activate the unit and enable operation via the remote commander. 1 Touch No on the demo setting display. 2 Touch Subwoofer to set the subwoofer connection status. Set to ON if a subwoofer is connected, or OFF if not. 3 Touch Listening Position to set the listening position. Set to Front L if your listening position is front left, or Front R if front right. To return to the Initial Setting, touch

. 4 Touch Language to set the display language. Move the scrollbar up and down, then select the desired language (English/Franais/

Espaol/Portugus//Nederlands/

Deutsch/Italiano). To return to the Initial Setting, touch

. 5 Touch OK. The setting is complete. This setting can then be further configured in the setting menu. For details on setting the subwoofer connection status, see page 54. For details on setting the listening position, see Optimizing sound for the listening position Intelligent Time Alignment on page 46. 15 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 16 Friday, June 15, 2012 2:52 PM For details on setting the character encoding, see page 51. Radio For details on setting the display language, see page 51. Note Some characters may not be displayed correctly, depending on the language/country/region. Setting the clock The clock uses a 12-hour indication. 1 Press (HOME), then touch Settings. 2 Touch

, then touch Clock Adjust. The setting display appears. 3 Set the hour and minute. For example, to set to 8:30, touch 0830. 4 Touch AM or PM. 5 Touch OK. The setting is complete. To activate/deactivate the CT function, touch CT in step 3. (page 51) To delete an entered number, touch Clear. To return to the previous display, touch

. Notes The CT function may not work even though an RDS station is being received. There may be a difference between the time set by the CT function and the actual time. Preparing the remote commander Before using the remote commander for the first time, remove the insulation film. Program Service Data: Contributes to the superior user experience of HD Radio Technology. Presents song name, artist, station IDs, HD2/

HD3 Channel Guide, and other relevant data streams. Adjacent to traditional main stations are extra local FM channels. These HD2/HD3 Channels provide new, original music as well as deep cuts into traditional genre. Digital, CD-quality sound. HD Radio Technology enables local radio stations to broadcast a clean digital signal. AM sounds like todays FM and FM sounds like a CD. iTunes Tagging provides you the opportunity to discover a wide range of content and the means to tag that content for later review and purchase from the iTunes Store. Visual information related to content being played on your HD Radio receiver, such as Album Art, historical photographs, still art from live broadcasts, among other related content. For more information, visit the following website:

http://www.hdradio.com/

16 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 17 Friday, June 15, 2012 2:52 PM Listening to the radio 1 Press (HOME), then touch Tuner. The radio reception display appears. 2 Touch the current band. The band list appears. 3 Touch the desired band (FM1, FM2, FM3, AM1, or AM2). 4 Perform tuning.

/

To tune automatically Touch Scanning stops when the unit receives a station. Repeat this procedure until the desired station is received. For operations during HD Radio reception, see About FM Multicasting (page 18). To tune manually Touch frequency is received. To skip frequencies continuously, touch and hold repeatedly until the desired

/

/

. Reception controls Play operation display:

1 2 3 4 5 6

(List)*

Touch to display the list for selecting the main/supplemental program (only when digital broadcast is being received)

(page 18). Touch to register the preset item. Touch to change Visualizer, which contains the following items:

Gate/Balloon/Glow/Animal/Graffiti/Ink/

Random/OFF

(Playback Display)*

Touch to display the HD Radio play display.

(Option) Touch to delete all the iTunes tags registered (page 19).

/

Touch to tune automatically. For operations during HD Radio reception, see About FM Multicasting

(page 18). 2 3 4 5 6 7 8

/

Touch to tune manually. Touch and hold to continuously skip frequencies. 9 1 to 6 Touch to select stations. Touch and hold to store the currently displayed frequency in a preset. 7 8 9 8 7 Play display (HD Radio reception only):

0 qa 4 6 0 qa

(Back) Touch to display the HD Radio play operation display. TAG Touch to register the tag to the track currently played (page 19).

* Cannot select during an analogue radio reception. 1 Current band icon Touch to open the band list. 17 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 18 Friday, June 15, 2012 2:52 PM Reception indications Play operation display:

A B C D 3 Touch BTM. The unit stores the first six available stations in the preset list (1 to 6). To return to the playback screen, touch

. E F Play display (HD Radio reception only):

A E C DD G H A Current source icon*

B Band name C Frequency/status D Station name/Program type E Station logo F Preset number G Album artwork*

H Track name, Artist name, Album name, Genre*

* Does not appear during an analogue radio reception. Storing and receiving stations Caution When tuning to stations while driving, use Best Tuning Memory (BTM) to prevent an accident. Storing automatically BTM 1 Press (HOME), then touch Tuner. Select the desired band (FM1, FM2, FM3, AM1, or AM2). 2 Touch

. BTM display appears. 18 Storing manually 1 While receiving the station that you

, then touch a want to store, touch number in the list (1 to 6). To return to the playback screen, touch Note If you try to store another station to the same number, the previously stored station will be replaced. Receiving stored stations 1 Select the band. 2 Touch the desired number (1 to 6). About FM Multicasting Some FM HD Radio stations provide a main program and supplemental program(s) (up to 7) at the same frequency. program is received. appears when a station with a supplemental Selecting a program from the list 1 During main program reception, touch

. 2 Touch the desired program. Searching a program automatically 1 During main program reception, touch

/

. iTunes Tagging The iTunes Tag button on this unit allows you to tag songs you like that are broadcast by HD Radio stations. Information about these tagged songs is stored by the receiver and transferred to your iPod. When you connect your iPod to your computer, iTunes automatically presents songs in a new Tagged playlist so you can preview, buy, and download them. iTunes Tagging is a great way to discover new music, and add it to your collection!

XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 19 Friday, June 15, 2012 2:52 PM Using iTunes Tagging You can save the name of a song broadcast on an HD Radio station to this unit with a few easy steps. After transferring the song information to the connected iPod using this unit, sync your iPod to your computer. These songs will show up in a Tagged playlist in iTunes, enabling easy preview or purchase of songs. For details on iTunes Tagging and the latest iTunes Tagging compatible models, check the iTunes website at - http://www.apple.com/itunes/

For details on purchasing a song using Tagged information, check the iTunes website at - http://

www.apple.com/support/itunes/

Retrieving song information TAG appears when song information is broadcast on an HD Radio station. 1 Press TAG. 1 Place your iPod on the connector of the unit. The unit automatically starts transferring saved song information. A message appears in the display during the transfer. If an iPod is inserted into the unit during tagged song retrieval, the unit immediately starts transferring the data to the iPod, after the data is saved. Once the unit completes transferring tagged song information to the iPod, the saved data will be erased from the unit. Notes Do not remove the iPod during the transfer. The unit cannot transfer song information if the iPod is removed. If the connected iPod does not support for iTunes Tagging, song information will not be transferred, even after this unit saves the data, and the error message will appear in the display. If the connected iPod does not have enough free space in the memory, song information will not be transferred, even after this unit saves the data, and the error message appears in the display. Deleting tagged song information You can delete all tagged song information before transferring to iPod. 1 Press (HOME), then touch Tuner. 2 Touch

. The confirmation display for deleting the tag appears. The unit starts retrieving song information. After retrieving the song information, the unit starts saving the data, and the completion message of tag registration appears. 3 Touch Delete. To cancel deletion, touch Cancel. Note Song information once deleted cannot be restored. Notes If the song information is not included in the HD Radio station broadcast, the error message appears. It takes up to 10 seconds to retrieve song information. If TAG is touched immediately after the beginning of a song, the unit may retrieve the information of the previously broadcast song as well as the current song. If TAG is touched just before the end of a song, the unit may retrieve the information of the next song, in addition to the current song. The maximum number of tagged songs that you can save to this unit is 50. If you touch TAG when 50 tagged songs are already saved, an error message will appear in the display and song information will not be retrieved. Transferring retrieved song information You can transfer song information retrieved and saved to an iPod using this unit. For details on compatible iPod models, see About iPod on page 63. 19 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 20 Friday, June 15, 2012 2:52 PM Discs Playing discs Depending on the disc, some operations may be different or restricted. Refer to the operating instructions supplied with your disc. 1 Press Z on the main unit. The front panel opens automatically. 2 Insert the disc (label side up). The front panel closes automatically, then playback starts. If the DVD menu appears Touch the item in the DVD menu. You can also use the menu control panel, which can be displayed by touching outside of the DVD menu. Touch B/V/v/b to move the cursor, then touch ENTER to confirm. If the menu control panel does not appear by touching the display, use the remote commander. About the DVD menu A DVD is divided into several sections, which make up a picture or music feature. These sections are called titles. When you play a DVD that contains several titles, you can select a desired title using the DVDs top menu. For DVDs that allow you to select items such as subtitle/sound language(s), select these items using the DVD menu. To stop playback Press and hold (SOURCE/OFF) for 1 second. Note Discs in DTS format are not supported. The sound is not output if the DTS format is selected. To eject the disc 1 Press Z on the main unit. The front panel opens automatically, then the disc is ejected. 2 Press Z on the main unit to close the front panel. Playback controls Touch the display if the playback controls are not displayed. 1 2 3 4 5 4 6 3 7 4 5 4 8 3 4 5 4 Note The front panel closes automatically after the caution alarm sounds. MPEG-4 1 3 20 4 5 4 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 21 Friday, June 15, 2012 2:52 PM 1 2 Touch to list up tracks/video files.

(page 25) Touch to change Visualizer, which contains the following items:

Gate/Balloon/Glow/Animal/Graffiti/Ink/

Random/OFF 3 Repeat 4 ./>

/Shuffle

(page 23) Touch to skip a chapter/track/scene file. Touch and hold momentarily to reverse/

fast-forward the video; and then repeatedly to switch the speed ( 2 t 12 t 120 t 2 )*1. To cancel, touch u. Touch and hold to reverse/fast-forward the audio track. During pause, touch and hold down >

to play the video in slow motion. To cancel, release the key. 5 u Touch to pause/resume play after pause. 6 7 8 Touch to open the DVD control menu, which contains the following items. Top Menu: Touch to open the top menu on the DVD.*2 Menu: Touch to open the menu on the disc.*2

: Touch repeatedly to select the audio language/format. (page 22)*2

: Touch repeatedly to turn off/select the subtitle language.*2*3

: Touch repeatedly to change the viewing angle.*2

(DVD VIDEO playback only) Touch to open the option menu. CSO (Center Speaker Organizer)

(page 47) DVD Audio Level (page 23) Touch to change the audio channel.

(page 23)

*1 The speed depends on the format or the recording method.

*2 Availability depends on the disc.

*3 When the 4-digit input prompt appears, input the language code (page 73) for the desired language. Note If the disc contains multiple file types, only the selected file type (audio/video) can be played. For details on how to select the file type, see Selecting a file type on page 25. Playback indications Touch the display if the indications are not displayed. For audio discs, some indications are always displayed during playback. A B C MPEG-4 D C D A Current source icon, format, chapter/title number*1, audio format*3 B Playback status, elapsed playback time C Track/artist/album name*1*5 File/folder name*6 D Current source icon, format, track (file) number*2, playback status, elapsed playback time*4 21 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 22 Friday, June 15, 2012 2:52 PM

*1 Indications differ depending on the content.

*2 When playing a VCD with PBC functions

(page 22), PBC appears.

*3 DVD only.

*4 During VCD playback with PBC functions, no indication appears.

*5 CD/MP3/WMA/AAC only.

*6 Xvid/MPEG-4 only. Using PBC (playback control) functions The PBC menu interactively assists with operations while a PBC-compatible VCD is played. 1 Start playing a PBC-compatible VCD. The PBC menu appears. 2 Press the number buttons on the remote commander to select the desired item, then press (ENTER). 3 Follow the instructions in the menu for interactive operations. To return to the previous display, press O on the remote commander. Playing without PBC functions 1 Press (HOME), then touch Settings. 2 Touch

. The source setting menu appears. 3 Move the scrollbar up and down, then touch Video CD PBC to set to OFF. 4 Start playing a VCD. The PBC menu does not appear during playback. Notes The items on the menu, and operation procedures differ depending on the disc. During PBC playback, the track number, playback item, etc., do not appear on the playback display. Resume playback is unavailable during playback with PBC. 22 Configuring audio settings Note Discs in DTS format are not supported. The sound is not output if the DTS format is selected. Changing the audio language/

format The audio language can be changed if the disc is recorded with multilingual tracks. You can also change the audio format when playing a disc recorded in multiple audio formats (e.g., Dolby Digital). 1 During playback, touch the screen. 2 Touch

. The audio language menu appears. 3 Touch repeatedly until the desired audio language/format appears. Audio language Audio format/channel numbers*

The audio language switches among the available languages. When the 4-digit input prompt appears, input the language code (page 73) for the desired language. When the same language is displayed two or more times, the disc is recorded in multiple audio formats.

* The format name and channel numbers appear as follows:

Example: Dolby Digital 5.1 ch Rear channel 2 Dolby D 3 / 2 . 1 Front channel 2 +

Center channel 1 LFE channel 1 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 23 Friday, June 15, 2012 2:52 PM Changing the audio channel Repeat and shuffle play When playing a VCD, you can listen to both the right and left channel, only the right channel, or only the left channel via both the right and left speakers. The options are indicated below. Stereo: Standard stereo sound (default) 1/Left: Left channel sound (monaural) 2/Right: Right channel sound (monaural) 1 During playback, touch repeatedly until the desired audio channel appears. Note You may not be able to change the audio setting depending on the disc. Tips Operation via the remote commander by pressing

(AUDIO) repeatedly is also available. The audio channels can be changed by pressing AUDIO on the remote commander when VCD is selected. Adjusting the audio output level Dolby D level You can adjust the audio output level for a DVD recorded in Dolby Digital format, to reduce the volume level differences between discs. 1 During playback, touch 2 Touch DVD Audio Level. 3 Touch /+ repeatedly to adjust the output level. The output level is adjustable in single steps, between 10 and +10. To close the play menu, touch

. MPEG-4 1 During playback, touch Repeat repeatedly until the or Shuffle desired option appears. Repeat or shuffle play starts. The repeat options and switching order of each disc/format are indicated below. Disc/format Options

*1 OFF: Returns to normal play mode. Chapter: Repeats the current chapter. Title: Repeats the current title. All: Repeats all tracks on the disc. Track: Repeats the current track. All: Repeats all tracks on the disc. Track: Repeats the current track. Album: Repeats the current album (folder). All: Repeats all video files on the disc. Movie: Repeats the current video file. Album: Repeats the current album (folder). MPEG-4 23 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 24 Friday, June 15, 2012 2:52 PM The shuffle options and switching order of each disc/format are indicated below. Disc/format Options

*2

*1 OFF: Returns to normal play mode. Title: Plays chapters in the current title in random order. OFF: Returns to normal play mode. Disc: Plays tracks in the current disc in random order. OFF: Returns to normal play mode. Album: Plays tracks/video files in the current album

(folder) in random order. MPEG-4

*1 Available only when playing a version 1.0/1.1 VCD, or a version 2.0 VCD without PBC functions.

*2 Excluding a DVD-R/DVD-R DL/DVD-RW in VR mode. Direct search play MPEG-4 You can directly locate a desired point by specifying the title number, chapter number, etc. 1 During playback, press the number buttons on the remote commander to enter an item (track, title, etc.) number, then press (ENTER). Playback starts from the beginning of the selected point. The search items for a disc/format are as follows:

DVD: Title or chapter*1 VCD*2/CD/MP3/WMA/AAC: Track Xvid/MPEG-4: Movie

*1 The search item depends on the setting.

*2 Available only when playing a VCD without PBC functions. Setting the search item (DVD only) You can set the search item (title or chapter) for DVD playback. 1 Press (HOME), then touch Settings. 2 Touch

. The source setting menu appears. 3 Touch DVD Direct Search to set to Chapter or Title. The setting is complete. To return to the previous display, touch

. 24 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 25 Friday, June 15, 2012 2:52 PM Listing up tracks/video files List Selecting a track/video file MPEG-4 You can list up albums/folders/tracks/video files, and select a desired one to play. This function is convenient especially for the disc in MP3/WMA/AAC/Xvid/MPEG-4 format containing many albums/tracks, etc. 1 During playback, touch

. The list of categories or files from the currently played item appears. To move to the upper level, touch To move to the top level, touch

. To scroll the list, move the scrollbar up and down. 2 Touch the desired item. Playback starts. Selecting a file type MPEG-4 If the disc contains multiple file types, only the selected file type (audio/video) can be played. The playback priority order of file type is initially set to audio, video (e.g., if the disc contains audio and video files, only audio files are played). You can select the file type to list up, then select the desired file to play. 1 During playback, touch 2 Touch 3 Touch the desired file. to select the file type. or

. Playback of the selected file starts. USB Music Playing music 1 Connect the USB device to the USB 2 Press (HOME), then touch USB port. Music. Playback starts. Playback controls 1 2 3 4 5 6 7 6 1 Touch to list up track files. 2 ZAP Touch to search for a track by listening to track passages. (page 34) 3 Touch to change to the screen with Visualizer. 4 Repeat 5

/Shuffle Touch to open the option menu.

/

Touch to skip a track file. Touch and hold to reverse/fast-forward the audio track. 6 7 Touch to play a track file. Touch to pause playback. 25 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 26 Friday, June 15, 2012 2:52 PM Options To change the setting menu (Normal playback screen only) 1 Touch

. The menu list appears. 2 Touch

. The options are indicated below. ZAPPIN Time Selects the playback on time for the ZAPPIN function: 6 sec., 15 sec., 30 sec.. Update database Searches for music files and adds them to the database. About Music player Displays the application version. To change the Visualizer settings 1 Touch

. The normal playback screen will change to the playback screen with Visualizer. 2 Touch 3 Touch

. The menu list appears. The Visualizer list appears. 4 Select the following items:

Gate/Balloon/Glow/Animal/Albums/

Graffiti/Ink/Random Repeat and shuffle play 1 During playback, touch Repeat repeatedly until the or Shuffle desired option appears. Repeat or shuffle play starts. The repeat options are as follows:

: Repeats the current group.

: Repeats the current music file.

: Returns to normal play mode. The shuffle options are as follows:

: Plays music files in the current group in random order.

: Returns to normal play mode. Note The playback screen with Visualizer is not available with repeat and shuffle play. 26 Selecting music files 1 During playback (Normal playback

. screen only), touch The list of categories or files from the currently played item appears. To scroll the list, move the scrollbar up and down. 2 Touch the desired item. Playback starts. To return to the Playback screen, touch

. Selecting songs from the library 1 While the list screen appears, touch

. The menu list appears. 2 Select the desired item. You can search by the following items. All songs, Albums, Artists, Genres, Release year, Recently added, Playlists, Folders. The selected list appears. 3 Touch the desired item. Playback starts. Enjoying music according to your mood SensMe Sonys unique SensMe channels feature automatically group tracks by channel or mood, and allow you to enjoy music intuitively. Installing Media Go to your computer Software (Media Go) is required to enable the SensMe function on this unit. 1 Download Media Go software from the support site on the back cover. 2 Follow the on-screen instructions to complete the installation. Transferring tracks to the USB device using Media Go To enable the SensMe function on this unit, tracks need to be analyzed and transferred to the registered USB device using Media Go. 1 Connect the registered USB device to your computer. For WALKMAN, connect via MTP mode. XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 27 Friday, June 15, 2012 2:52 PM For USB devices other than WALKMAN, connect via MSC mode. Media Go starts automatically. If a message appears, follow the on-screen instructions to proceed. 2 Drag and drop tracks from Windows Explorer or iTunes, etc., to Media Go. The analysis and transfer of tracks starts. For details on operations, refer to the Help of Media Go. Note The track analysis by 12 TONE ANALYSIS may take time, depending on the computer environment. Tip Not only audio files but also image or video files can be transferred using Media Go. For details, refer to the Help of Media Go. Playing tracks in channels SensMe channels SensMe channels automatically group tracks into channels by their tunes. You can select and play a channel that fits your mood, activity, etc. 1 Connect a USB device set up for the SensMe function. 2 Press (HOME), then touch USB

, then Music. 3 Touch 4 Flick the channel list left or right. Playback of the first track in the current channel starts from the tracks most melodic or rhythmical section*.

* May not be detected correctly. 5 Touch the desired channel. Playback of tracks in the selected channel starts. Notes Depending on the track, it may not be detected correctly or may be grouped in a channel not suited to the tracks mood. If the connected USB device contains many tracks, it may take time for SensMe channels to start, due to data reading. Channel list x Basic channels Plays tracks according to the music type. Energetic: Plays up-tempo and high-energy music. Emotional: Plays ballads. Lounge: Plays jazz and easy listening music. Dance: Plays rhythm, rap and R & B music. Extreme: Plays loud and powerful music. Upbeat: Plays cheerful and uplifting music. Relax: Plays calm and relaxing music. Mellow: Plays soft and slow-tempo music. x Recommended Morning, Daytime, Evening, Night, Midnight x Shuffle All Plays all analyzed tracks in random order. SensMe channels playback controls and indications A B C D E F G A To scroll the list and select another channel. B Indicates the current channel. C Option key D Indicates the album artwork display*. E Indicates the elapsed playback time, track name and artist name. F To pause/resume play after pause. G To skip a track.

* The recommended size is from 240 240 to 960 960 pixels. Tip Tracks are played in random order. The order will vary with each channel selection. 27 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 28 Friday, June 15, 2012 2:52 PM Selecting an album by cover art 1 While the list screen appears, touch 2 Touch the cover art of the album you

. want to play. Playback starts. Options To change the setting menu 1 Touch

. The menu list appears. 2 Touch

. The options are indicated below. ZAPPIN Time Selects the playback on time for the ZAPPIN function: 6 sec., 15 sec., 30 sec.. Update database Searches for music files and adds them to the database. About Music player Displays the application version. To change the album display format

(while selecting Albums from Library) 1 Touch

. The menu list appears. 2 Touch Grid view.

, then select List view or To change the cover art sort order

(Cover art view only) 1 Touch

. The menu list appears. 2 Touch

, then select Sort by album, or Sort by artist. To return to the playback screen, touch Cancel. or 28 USB Video Playing video MPEG-4 1 Connect the USB device to the USB 2 Press (HOME), then touch USB port. Video. Playback starts. Playback controls Touch the display if the playback controls are not displayed. 1 2 3 4 5 4 3 1 2 3 4 Touch to list up video files. Touch to open the option menu. (page 29)

/

Touch to skip a track file.

/

Touch and hold momentarily to fast-

forward the video; and then repeatedly to switch the speed ( 1.5 t 10 t 30 t 100)*. Touch and hold momentarily to reverse the video; and then repeatedly to switch the speed ( 10 t 30 t 100)*. To cancel, touch

.

/

to skip Touch to skip up/down a track. During pause, touch forwards 15 sec. During pause, touch sec. Touch and hold to reverse/fast-forward the video track. to skip back10 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 29 Friday, June 15, 2012 2:52 PM 5 Touch to play a track file. Touch to pause playback.

* The speed depends on the format or the recording method. Tip You can change the playing speed dynamically by dragging the screen of the video file left or right. Options To display Audio options 1 During playback, touch

. The menu list appears. 2 Touch

. The audio option list appears. 3 Select the desired item. To display detailed information 1 During playback, touch

. The menu list appears. 2 Touch

. To view detailed information, move the scrollbar up and down. To delete the file 1 During playback, touch The menu list appears. 2 Touch 3 Touch OK. To change the settings 1 During playback, touch The menu list appears. 2 Touch

. The options are indicated below. Zoom settings Adjusts the video display: Normal mode, Full mode, Off. Update database Searches for video files and adds them to the database. About Video player Displays the application version. To return to the playback screen, touch Cancel. or Selecting video files 1 During playback, touch

. The list of categories or files from the currently played item appears. To scroll the list, move the scrollbar up and down. 2 Touch the desired item. Playback starts. To return to the Playback screen, touch

. To change the album display format 1 While the list screen appears, touch

. The options are indicated below.

: Grid view Displays video files as a grid.

: List view Displays video files as a list.

: Cover art view Displays video files as angled graphics. Options To change the video list sort order 1 Touch

. The menu list appears. 2 Touch

, then Oldest first, Newest first, A to Z, or Z to A. To change the Settings 1 Touch

. The menu list appears. 2 Touch

. The options are indicated below. Zoom settings Adjusts the video display: Normal mode, Full mode, Off. Update database Searches for video files and adds them to the database. About Video player Displays the application version. To return to the playback screen, touch Cancel. or 29 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 30 Friday, June 15, 2012 2:52 PM USB Photo Viewing Photos 1 Connect the USB device to the USB port. Photo. 2 Press (HOME), then touch USB 3 Touch All pictures, or Folders, then select the picture or folders. Playback controls Touch the display if the playback controls are not displayed. 1 2 3 4 5 1 2 3 4 5 Touch to list up photo files. Touch to open the option menu.

/

Touch to skip a photo file. Touch and hold to reverse/fast-forward the photo file. Touch to start slideshow. Touch the screen to stop the slideshow. Rotate the photo file to the left. Rotate the photo file to the right. Tip You can reverse/fast-forward a photo file by flicking the photo list left or right. 30 Options To play slideshow 1 During playback, touch The menu list appears. 2 Touch

. The slideshow starts. To set as wallpaper 1 During playback, touch The menu list appears. 2 Touch 3 Touch OK. To remove the picture 1 During playback, touch The menu list appears. 2 Touch 3 Touch OK. To display detailed information 1 During playback, touch

. The menu list appears. 2 Touch To view detailed information, move the scrollbar up and down. To change the settings 1 During playback, touch The menu list appears. 2 Touch The options are indicated below. Slideshow interval settings Adjusts the time interval: 0.5 sec. -

20.0 sec.. Play continuously Sets continuous playback (slideshow). Update database Searches for picture files and adds them to the database. About Photo viewer Displays the application version. To return to the playback screen, touch Cancel. or XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 31 Friday, June 15, 2012 2:52 PM Selecting photo files 1 During playback, touch

. The list of categories or files from the currently played item appears. To move to the upper level, touch To scroll the list, move the scrollbar up and down. 2 Touch the desired item. Playback starts. To play slideshow 1 Touch

. The slideshow starts. To change the display format 1 Touch

. The options are indicated below.

: Grid view Displays photo files as a grid.

: List view Displays photo files as a list.

: Cover art view Displays photo files as angled graphics.

: Date view (All pictures only) Displays photo files in order of date.

: Expanded view (Folders only) Displays folders, below which are displayed subfolders, and any photo file images that are contained. Options To play slideshow 1 During playback, touch The menu list appears. 2 Touch

. The slideshow starts. To change the Photo list sort order 1 Touch

. The menu list appears. 2 Touch

, then Oldest first, Newest first, A to Z, or Z to A. To change the settings 1 While the list screen appears, touch

. The menu list appears. 2 Touch

. The options are indicated below. Slideshow interval settings Adjusts the time interval: 0.5 sec. -

20.0 sec.. Play continuously Sets continuous playback (slideshow). Update database Searches for picture files and adds them to the database. About Photo viewer Displays the application version. To return to the playback screen, touch Cancel. or 31 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 32 Friday, June 15, 2012 2:52 PM Notes on USB playback iPod MSC (Mass Storage Class) can be used. Compatible codecs are MP3 (.mp3), WMA

(.wma), AAC/HE-AAC (.m4a), JPEG (.jpg), Xvid (.avi/.xvid), and MPEG-4 (.mp4). Backup of data in a USB device is recommended. Notes During USB Video playback, if the playback is intermittent:

Press (HOME) or launch the System settings. During the USB Photo, (Navigation), etc. Connect the USB device after starting the engine. Depending on the USB device, malfunction or damage may occur if it is connected before starting the engine. A large-sized file or many files may take time to start playing. This unit does not recognize multiple MSC devices. The signal of USB Video or USB Photo playback is not output from the REAR OUT terminal. To disconnect the USB device Stop playback, then disconnect. Do not disconnect during playback, as data in the USB device may be damaged. Notes on use Do not use USB devices so large or heavy that they may fall down due to vibration, or cause a loose connection. Do not leave a USB device in a parked car, as malfunction may result. This unit cannot recognize USB devices via a USB hub. Be sure to use the USB cable supplied with the device if a cable is needed when making a USB connection. Notes on playback Select USB Music, USB Video, or USB Photo depending on the file type of USB device. Displayed indications will differ, depending on the USB device, recorded format and settings. For details, visit the support site on the back cover. A folder/file name of up to 254 bytes can be The maximum number of displayable music files is recognized. as follows:

files (tracks): 10,000 It may take time for playback to begin, depending on the amount of recorded data. DRM (Digital Rights Management) files may not be played. During playback or reverse/fast-forward of a VBR

(Variable Bit Rate) MP3/WMA/AAC file, elapsed playing time may not display accurately. Playback of a lossless compression file is not supported. 32 For details on the compatibility of your iPod, see About iPod on page 63 or visit the support site on the back cover. In these Operating Instructions, iPod is used as a general reference for the iPod functions on the iPod and iPhone, unless otherwise specified by the text or illustrations. Note This unit does not recognize multiple iPods. Playing an iPod 1 Reduce the volume on this unit. If the iPod is turned off, turn it on. 2 Connect the iPod to the USB port. Use of the optional USB connection cable RC-202IPV is recommended.*1 A connection process indicator appears on the iPod screen*2, then playback starts from the item last played. If an iPod is already connected, to start playback, touch iPod.

*1 To play videos from an iPod with video, use of the RC-202IPV is required.

*2 May not appear in the case of an iPod touch or iPhone being connected, when the iPod was last played using Passenger App Control, or when the Telenav Touch Panel Control is performed. 3 Adjust the volume on this unit. Notes If an iPod touch or iPhone is connected to this unit, a display recommending application installation may appear on this unit. The signal of iPod video playback is not output from the REAR OUT terminal. About playback controls and indications You can control iPod playback in the same way as disc playback. For details, see Playback controls on page 20. For details on playback indications, see Playback indications on page 21. To stop playback Press and hold (SOURCE/OFF) for 1 second. To disconnect the iPod Stop playback, then disconnect. Do not disconnect during playback, as data in the iPod may be damaged. XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 33 Friday, June 15, 2012 2:52 PM To enter ZAPPIN mode For details on this procedure, see Searching for a track by listening to track passages ZAPPIN on page 34. About resuming mode When the iPod currently playing is connected to the dock connector, the mode of this unit changes to resuming mode and playback starts in the mode set by the iPod. In resuming mode, repeat/shuffle play are not available. Caution for iPhone When you connect an iPhone via USB, telephone volume is controlled by the iPhone itself. In order to avoid emitting sudden loud sound after a call, do not increase the volume on the unit during a call. Note This unit cannot recognize an iPod via a USB hub. Tips When the ignition key is turned to the ACC position with the unit on, the iPod will be recharged. If the iPod is disconnected during playback, No Device appears on the display of the unit. Listing up tracks/video files List Selecting a track/video file You can list up albums/folders/tracks/video files, and select a desired one to play. 1 During playback, touch

. The list of categories or files from the currently played item appears. To move to the upper level, touch To scroll the list, move the scrollbar up and down. To search files by alphabetical order, touch

. To return to the top screen, touch

. 2 Touch the desired item. Playback starts. Selecting a file type You can select the file type to list up, then select the desired file to play. 1 During playback, touch 2 Touch 3 Touch the desired file. to select the file type. or

. Playback of the selected file starts. To return to the Playback screen, touch

. Selecting the play mode You can set one of the following play modes. For audio playback Track, Album, Artist, Genre, Playlist, Podcast*

* May not appear depending on iPod setting. For video playback Same as audio playback, but display item depends on the iPod. 1 During playback, touch 2 Touch 3 Touch 4 Touch the desired play mode. or

. To start playback, touch the desired item(s) in the list. To scroll the list, move the scrollbar up and down. Repeat and shuffle play 1 During playback, touch Repeat repeatedly until the or Shuffle desired option appears. Repeat or shuffle play starts. The repeat options are as follows:

For audio playback All: Repeats all tracks in the iPod. Track: Repeats the current track. Album/Podcast/Artist/Playlist/

Genre*: Repeats the current item of the selected play mode. 33 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 34 Friday, June 15, 2012 2:52 PM For video playback All: Repeats all video files in the iPod. Track: Repeats the current video. Group*: Repeats the current item of the selected play mode. The shuffle options are as follows:

For audio playback OFF: Returns to normal play mode. Album/Podcast/Artist/Playlist/

Genre*: Plays tracks of the selected play mode in random order. Device: Plays all tracks in an iPod in random order.

* Differs depending on the selected play mode. Note Displayed options may not conform to actual operation. Operating an iPod directly Passenger App Control You can directly operate an iPod connected to this unit. 1 During playback, touch

. Deactivating the Passenger App Control During Passenger App Control, touch screen, then Cancel button. The play mode changes to resuming mode. Notes App image and Video can only be displayed on this unit while the parking brake is applied. App and Video are only controllable from iPhone and iPod. limited. Apps compatible with Passenger App Control are To output video to this unit, you need to activate the video output of the iPod. The volume can be adjusted only by this unit. The repeat and shuffle settings will be off if the Passenger App Control mode is canceled. 34 Useful Functions Searching for a track by listening to track passages ZAPPIN While playing short track passages from a USB device or an iPod in sequence, you can search for a track you want to listen to. This function is convenient, for example, when searching for a track in shuffle or shuffle repeat mode. 1 During audio playback, touch ZAP. In the case of USB Music, ZAP mode starts from the currently playing track. The most melodic or rhythmical sections of tracks are played. Those passages are played for the set time. Note Tracks need to be analyzed by 12 TONE ANALYSIS. ZAP touched. The playback section of each track in ZAPPIN mode. In the case of iPod, ZAP mode starts from a passage in the next track. ZAP touched. 2 Touch ZAP when a track you want to The playback section of each track in ZAPPIN mode. listen to is played. In the case of USB Music, playback returns to normal from the current position until the end of the track. In the case of iPod, the selected track plays from the beginning. To search for a track via ZAPPIN mode again, repeat steps 1 and 2. Tips You cannot select the track passage to play. You can select the playback time. Touch

, then select the playback on time for the ZAPPIN function:

6 sec., 15 sec., 30 sec.. XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 35 Friday, June 15, 2012 2:52 PM Controlling applications on your smartphone MirrorLink This function duplicates the smartphones display on the in-car display, so you can control applications on your smartphone with the bigger screen. Only a smartphone compatible with the MirrorLink function can be used. 1 Connect your smartphone and the unit via USB cable. 2 Press (HOME), then touch MirrorLink. The smartphones display appears on the in-

car display. Touch and control applications in the same way as you do on your smartphone. Note For your safety, when the parking brake is not engaged, some smartphone screen content may not be displayed on AVC. Controlling applications on your iPhone Telenav GPS App Telenavs navigation on your iPhone makes finding and getting to your destination faster, easier, and more convenient than ever before. Now you can use Telenav GPS with your Sony receiver. Simply connect your Telenav GPS to the car and see directions on your receiver screen while hearing them over the car speakers. 1 Connect your iPhone to the USB port. 2 Launch the Telenav application on the iPhone. 3 Press (HOME), then touch Telenav. The display of the Telenav application appears on the display of the unit, and the touch panel operation enables you to control the application on your iPhone. Note The Telenav function is only available on iPhone 4S and iPhone 4, and downloading the Telenav app to your iPhone is required. Enjoying different sources in front and rear Zone Zone You can simultaneously enjoy different sources in the front and rear of the car. Selectable sources for this unit (front) and the rear monitor (rear) are indicated below. Front: Any source. Rear: Disc inserted in this unit. 1 Press (HOME) on the main unit. 2 Touch ZONE ZONE to activate Zone Zone. To operate the source in the front, use the touch panel and buttons on the main unit. To operate the source in the rear, use the remote commander. Tip You can also activate/deactivate Zone Zone by pressing (Z x Z) on the remote commander. To deactivate Zone Zone Touch ZONE ZONE again in the HOME menu. Notes Once (SOURCE/OFF) on the main unit or remote commander is pressed, Zone Zone is deactivated. While Zone Zone is activated, the following buttons on the remote commander become inactive:

(SRC), (MODE), (ATT), (VOL) +/, (CLEAR), number buttons. While Zone Zone is activated, you can only operate rear DVD playback by the remote commander. While Zone Zone is activated, the following are deactivated. EQ7 (page 45) Balance/Fader/Subwoofer (page 53) Intelligent Time Alignment (page 46) CSO (page 47) HPF, LPF (page 54) Rear Bass Enhancer (page 47) Changing the color of buttons Dynamic Color Illuminator Dynamic Color Illuminator allows you to change the color of the buttons on the main unit to match the car's interior. You can select from 12 preset colors, customized color and 5 preset patterns. x Preset colors Red, Amber, Medium Amber, Yellow, White, Light Green, Green, Light Blue, Sky Blue, Blue, Purple, Pink. x Preset patterns Rainbow, Ocean, Sunset, Forest, Random. 1 Press (HOME), then touch Settings. 2 Touch

, and move the scrollbar up and down, then touch Key Illumination. 35 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 36 Friday, June 15, 2012 2:52 PM 3 Move the scrollbar up and down to select the desired preset color, then press it. Customizing the button color Custom Color You can register a customized color for the buttons. 1 Press (HOME), then touch Settings. 2 Touch

, and move the scrollbar up and down, then touch Key Illumination. 3 Move the scrollbar up and down to select Custom, then press Tune >. 4 Move the scrollbar left and right or press +/ to adjust the color range of R (red), G (green), or B (blue). Adjustable color range: 0 63. You can set the color while observing the button illumination. Using Gesture Command You can perform frequently-used operations by drawing the following command stroke on the reception/playback display. Do this Draw a horizontal line

(left to right) Draw a horizontal line

(right to left) 36 To Radio reception:

seek forward stations.

(The same as >.) DVD/VCD playback:

skip forward a chapter/track.

(The same as >.) Xvid/MPEG-4/audio playback:

skip forward a file/track.

(The same as >.) Pandora playback:

skip a song.

(The same as >.) Radio reception:

seek backward stations.

(The same as ..) DVD/VCD playback:

skip backward a chapter/track.

(The same as ..) Xvid/MPEG-4/audio playback:

skip backward a file/track.

(The same as ..) Draw a vertical line

(upwards) Draw a vertical line

(downwards)

.) Radio reception:

receive stored stations (go forward). DVD/VCD/Xvid/MPEG-4 playback:

fast-forward the video. Audio playback:

skip forward an album (folder). Pandora playback:

Thumbs up.

(The same as Radio reception:

receive stored stations (go backward). DVD/VCD/Xvid/MPEG-4 playback:

reverse the video. Audio playback:

skip backward an album

(folder). Pandora playback:

Thumbs down.

(The same as

.) XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 37 Friday, June 15, 2012 2:52 PM Handsfree Calling and Audio Streaming Bluetooth function Before using the Bluetooth function Basic procedure of the Bluetooth function 1Pairing When connecting Bluetooth devices for the first time, mutual registration is required. This is called pairing. This registration (pairing) is required only for the first time, as this unit and the other devices will recognize each other automatically from the next time. Bluetooth status indications None: Bluetooth signal is off. Lit: Bluetooth signal is on. None: No device is connected for audio streaming. Flashing: Connection is in progress. Lit: A device is connected. None: No cellular phone is connected for handsfree calling. Flashing: Connection is in progress. Lit: A cellular phone is connected. Indicates the signal strength status of the connected cellular phone. Indicates the remaining battery status of the connected cellular phone. None: No unread SMS messages Lit: Unread SMS message(s) Note If you delete the device registration from this unit, you need to perform pairing again. 2Connecting After pairing is made, connect this unit and the Bluetooth device. Depending on the device, connection is automatically made along with the pairing. Installing the microphone To capture your voice during handsfree calling, you need to install the microphone (supplied). For details on how to connect the microphone, refer to the supplied Installation/Connections guide. 3Handsfree calling/audio streaming You can make/receive a handsfree call, or listen to audio through this unit. 37 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 38 Friday, June 15, 2012 2:52 PM Pairing Pairing is required only the first time you connect to a Bluetooth device (cellular phone, etc.).*

For details, refer to the manual of the Bluetooth device.

* If you delete the device registration from this unit, you need to perform pairing again. Tip You can pair up to 9 devices. Searching from the Bluetooth device The procedure to search for this unit from the other Bluetooth device is explained below. 1 Press (HOME), then touch Settings. 2 Touch

, and move the scrollbar up and down. 3 Touch Bluetooth Connection, then set the signal to ON. The Bluetooth signal of this unit is activated. 4 Touch Pairing >. This unit is ready to be detected by the other Bluetooth device. 5 Operate the Bluetooth device to search for this unit. A device list appears on the display of the device. This unit is displayed as Sony Automotive. DR-BT30Q Sony Automotive XXXXXXX 6 If passkey* input is required on the display of the device, input 0000. Input passkey. 0000 XXXX This unit and the Bluetooth device memorize each others information, and when pairing is made, this unit is ready for connection to the device. 38 7 Operate the Bluetooth device to connect to this unit. Bluetooth device name appears and connection is complete. when the connection is made. or appears

* Passkey may be called passcode, PIN code, PIN number, password, etc., depending on the Bluetooth device. Notes While connecting to a Bluetooth device, this unit cannot be detected from another device. To enable detection, disconnect the current connection. It may take time to search or connect. Depending on the device, the connection confirmation display may appear before inputting the passkey. The time limit for inputting the passkey differs depending on the device. This unit cannot be connected to a device that supports only HSP (Head Set Profile). Connecting When the ignition is turned to on with the Bluetooth signal activated, this unit searches for the last-connected Bluetooth device, and connection is made automatically if possible. This chapter explains how to connect manually to registered Bluetooth devices. Before starting, be sure to activate the Bluetooth signal both on this unit (page 43) and the other Bluetooth device. To connect from the other Bluetooth device Operate the other Bluetooth device to connect to this unit. When connection is made successfully, appears at the top of the display. Note If connection is made during audio streaming, noise may occur over playback sound. Tip You can connect a cellular phone for audio streaming if it supports A2DP (Advanced Audio Distribution Profile). or XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 39 Friday, June 15, 2012 2:52 PM Handsfree calling Once the unit is connected to the cellular phone, you can make/receive handsfree calls by operating this unit. Making calls By dialing a phone number 1 Press (HOME), then touch Phone. The Bluetooth Phone display appears. 2 Touch

. The number input display appears. 3 Touch the number keys to enter the phone number, then touch To delete an entered number, touch

. The call is made and the calling display appears until the other party answers. By the phonebook For details on how to manage the phonebook data, see Phonebook management on page 41. 1 Press (HOME), then touch Phone. The Bluetooth Phone display appears. 2 Touch

. The phonebook appears. 3 Select the desired contact. 1 In the name list, touch the name of the contact. 2 In the number list, touch the phone number. To search the desired contact by alphabetical order, touch The contact confirmation display appears.

, then select alphabet. 4 Touch

. The call is made and the calling display appears until the other party answers. By the call history The unit stores the last 20 calls, allowing you to select one quickly from the list. 1 Press (HOME), then touch Phone. The Bluetooth Phone display appears. 2 Touch

. The call history list appears. To scroll the list, move the scrollbar up and down. 3 Touch the desired item in the list. The contact confirmation display appears. 4 Touch

. The call is made and the calling display appears until the other party answers. By the preset dial You can store up to 6 contacts in the preset dial. For details on how to store, see Preset dial on page 42. 1 Press (HOME), then touch Phone. The Bluetooth Phone display appears. 2 Touch the number in the list (1 to 6). The contact confirmation display appears. 3 Touch

. The call is made and the calling display appears until the other party answers. By the voice dial function You can make a call using the voice tag stored on the connected cellular phone. 1 Press (HOME), then touch Phone. The Bluetooth Phone display appears. 2 Touch 3 Say the voice tag stored on the cellular

. phone. Your voice is recognized, then the call is made. The calling display appears until the other party answers. By the redial function 1 Press (HOME), then touch Phone. The Bluetooth Phone display appears. 2 Touch

. The call is made and the calling display appears until the other party answers. Tip You can also browse the phonebook of the connected cellular phone on this unit and make a call (page 41). Notes Say the voice tag in the same way as you stored it on the cellular phone. If the voice dial function is activated on the connected cellular phone, it may not work via this unit. 39 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 40 Friday, June 15, 2012 2:52 PM To transfer back to the handsfree call, touch again. Note Depending on the cellular phone, connection may be cut off when call transfer is attempted. To adjust the volume for the other party 1 Touch 2 Touch Low, Middle, or High to

, then MIC Gain. adjust the level. 3 Touch repeatedly to return to the previous displays. To end a call Touch

. Do not use the voice dial function on the cellular phone while it is connected to this unit. Noises such as the engine running may interfere with sound recognition. In order to improve recognition, operate under conditions where noise is minimized. Voice dial may not work depending on the recognition specification of the cellular phone. For details, visit the support site on the back cover. To adjust the talkers voice volume Press (VOL) +/ while making a call. The level of the talkers voice volume will be stored into memory, independently from the regular volume level. Receiving calls With the unit connected to the cellular phone, you can receive a call in any status (except for MirrorLink mode). To answer the call Touch

. To adjust the ringtone volume Press (VOL) +/ while receiving a call. The level of ringtone volume will be stored into memory, independently from the regular volume level. To reject a call Touch Note The ringtone and talkers voice are output only from the front speakers. Tips You can set to answer a call automatically

(page 42). You can set to use the ringtone of the cellular phone or this unit (page 42). Operations during a call To adjust the talkers voice volume Press (VOL) +/ during a call. The level of the talkers voice volume will be stored into memory, independently from the regular volume level. To send DTMF (Dual Tone Multiple Frequency) tones Touch

, then the required number keys. To transfer the current call to the cellular phone Touch

. 40 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 41 Friday, June 15, 2012 2:52 PM Phonebook management You can store up to 500 contacts in the phonebook and up to 5 phone numbers can be registered to each contact. Notes Prior to disposal or changing ownership of your car with this unit still installed, be sure to erase all the phonebook data in this unit to prevent possible unauthorized access, by doing any of the following:

Delete the phonebook data by initializing

(page 43). Press the reset button. Disconnect the power supply lead. Downloaded phonebook data from a cellular phone cannot be overwritten by subsequent data. However, some data (name, etc.), may be duplicated as a result. Phonebook data may be lost if this unit is damaged. Selecting phonebook data You can select the phonebook data of a cellular phone, or the internal data on this unit. 1 Press (HOME), then touch Phone. The Bluetooth Phone display appears.

, then Phonebook Select. 2 Touch 3 Touch the desired item. To return to the previous display, touch

. Storing phonebook data (When Internal has been selected from Phonebook Select) You can send phonebook data from the connected cellular phone and receive it on this unit. 1 Press (HOME), then touch Phone. The Bluetooth Phone display appears. 2 Touch

, then Receive Phonebook. This unit is ready for receiving phonebook data. 3 Send the phonebook data by operating the connected cellular phone. When receiving is complete, Bluetooth device name appears and the phonebook data is stored on this unit. Browsing a phonebook You can browse its phonebook data. You can also make a call to a contact. 1 Press (HOME), then touch Phone. The Bluetooth Phone display appears. 2 Touch

. The phonebook appears. 3 Select the desired contact. 1 In the name list, touch the name of the contact. 2 In the number list, touch the phone number. To search the desired contact by alphabetical order, touch The contact confirmation display appears.

, then select alphabet. To call the contact Select the desired contact from the phonebook, then touch

. Deleting phonebook data To delete all phonebook data on this unit 1 Press (HOME), then touch Phone. The Bluetooth Phone display appears. 2 Touch 3 Touch

. The phonebook appears. The confirmation display appears. 4 Touch OK. All phonebook data is deleted. To delete an individual contact from the phonebook 1 Follow steps 1 to 2 above. 2 Select the contact to delete. In the name list, touch the name of the contact. To search the desired contact by alphabetical order, touch

.

, then select alphabet. 3 Touch The confirmation display appears. 4 Touch OK. The contact is deleted from the phonebook. 41 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 42 Friday, June 15, 2012 2:52 PM Call data management Phone option menu Deleting call history You can delete the items in the call history. To delete all items in the call history 1 Press (HOME), then touch Phone. The Bluetooth Phone display appears. 2 Touch

. 3 Touch

. 4 Touch OK. The call history list appears. The confirmation display appears. All items in the call history are deleted. Preset dial You can store contacts in the phonebook or call history into the preset dials. To store from the phonebook 1 Press (HOME), then touch Phone. The Bluetooth Phone display appears. 2 Touch

. The phonebook appears. 3 Select the contact to store in the preset dial. 1In the name list, touch the name of the contact. number. 2In the number list, touch the phone To search the desired contact by alphabetical order, touch The contact confirmation display appears.

, then select alphabet. 4 Touch Preset, then the desired preset number (1 to 6). The contact is stored to the selected preset number. To change the registration of the preset dial Follow the procedure above and overwrite a registered preset dial. 42 The Phone option menu can be configured in Phone. 1 Press (HOME), then touch Phone. 2 Touch

. The Phone option menu appears. 3 Touch the desired item in the list and configure the setting. The items in the Phone option menu are as follows:

Ringtone*1*2 Uses the ringtone of this unit or the connected cellular phone: Internal, Cellular. Auto Answer*1 Answers an incoming call automatically. OFF: to not answer automatically. 3 sec: to answer automatically after 3 10 sec: to answer automatically after 10 seconds. seconds. Phonebook Select Browses the phonebook data on this unit or cellular phone: Internal, Cellular. Receive Phonebook Sends phonebook data from the connected cellular phone. When receiving is complete, Bluetooth device name appears. Background Visualizer Sets Background Visualizer: ON, OFF.

*1 Cannot be configured during a handsfree call.

*2 Depending on the cellular phone, this units ringtone may be output even if set to Cellular. During a handsfree call, the items in the Phone option menu are as follows:

Speech Quality (Echo Canceller/Noise Canceller Mode) Reduces echo and noise during a call. For normal use, set to Mode 1. If the outgoing sound quality is unsatisfactory, set to Mode 2. MIC Gain (page 40) Adjusts the microphone volume for the other party: Low, Middle, High. XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 43 Friday, June 15, 2012 2:52 PM Audio streaming Listening to a Bluetooth device via this unit If the other device supports A2DP (Advanced Audio Distribution Profile), you can listen to the playback sound via this unit. 1 Connect this unit and the Bluetooth device (page 38). 2 Reduce the volume on this unit. 3 Press (HOME), then touch BT Audio. The Bluetooth Audio display appears. 4 Operate the other Bluetooth device to start playback. 5 Adjust the volume on this unit. Note During disconnection to the last-connected device, touch Reconnect to search for the last-connected Bluetooth device. If the problem is not solved, touch BT Settings, then set the signal to ON. Touch Pairing > to enter the Paring mode. For details on the procedure of the Paring, see page 38. Operating a Bluetooth device with this unit If the other device supports AVRCP (Audio Video Remote Control Profile), you can control playback via this unit. Operations can be performed in the same way as disc playback (page 20), except for the following:

Do this Touch To reduce the volume level differences between this unit and the other Bluetooth device. The level is adjustable in single steps, between 8 and +18. Notes The available operation differs depending on the Bluetooth device. Perform unavailable operations on the Bluetooth device. Depending on the Bluetooth device, it may be necessary to touch u twice to start/pause the playback. During audio streaming, some indications such as track name, etc., may not appear on this unit. General Settings about Bluetooth The Bluetooth settings can be configured in General Settings. 1 Touch

, and move the scrollbar up and down. The Bluetooth setting menu appears. 2 Touch the desired item in the list and configure the setting. The items in the Bluetooth setting menu are as follows:

Bluetooth Connection*

Activates the Bluetooth signal: ON, OFF. Touch Pairing > to enter the Paring mode. Bluetooth Initialize*

Initializes all Bluetooth-related settings. Touch Initialize to confirm. Bluetooth Initialize deletes all Bluetooth-

related settings such as phonebook data, call history, preset dial, history of connected Bluetooth devices, etc.

* Cannot be configured during a handsfree call. Note For details on the setting of other Bluetooth devices, refer to their respective manuals. 43 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 44 Friday, June 15, 2012 2:52 PM Pandora internet radio Pandora internet radio is available to stream music through your Android, BlackBerry phones and iPhone. You can control Pandora on a connected device from this unit. Download the latest version of the Pandora application and obtain more information from www.pandora.com For details on usable devices, visit the support site on the back cover. Notes Certain Pandora service functions may not be available. You can control Pandora via the Bluetooth function on Android and BlackBerry phones only. You can also operate Pandora from an iPhone connected via USB. The Pandora service is only available in the U.S. Streaming Pandora Before connecting the mobile device or iPhone, turn down the volume of the unit. To connect the mobile device via the Bluetooth function 1 Connect this unit and the mobile device via the Bluetooth function

(page 38). 2 Launch the Pandora application on the mobile device. 3 Press (HOME), then touch Pandora. 4 Touch

, then Bluetooth connection for Android or Blackberry*. Playback starts.

* When the mobile device is connected, the device number may appear. Make sure that the same numbers are displayed (e.g., 123456) in this unit and the mobile device, then touch OK on this unit and confirm on the mobile device. Note During disconnection to the last-connected device, touch Reconnect to search for the last-connected Bluetooth device. If the problem is not solved, touch BT Settings, then set the signal to ON. Touch Pairing > to enter the Paring mode. For details on the procedure of the Paring, see page 38. Adjusting the volume level During playback, touch Volume Level Adjust.

, then touch +/ in the 44 To connect the iPhone 1 Press (HOME), then touch Pandora. 2 Launch the Pandora application on the iPhone. 3 Connect this unit and iPhone. Playback starts. To pause playback, touch u. To resume playback, touch again. To skip a song, touch >. Notes You cannot skip back to the previous song. Pandora limits the number of skips allowed. Thumbs feedback Thumbs Up or Thumbs Down feedback allows you to personalize stations to suit your preference. Thumbs Up During playback, touch Thumbs Down During playback, touch

. Station list The station list allows you to easily select a desired station. 1 During playback, touch

. The station list appears. 2 Touch the desired station name. Playback starts. To change the sorting order, touch To scroll the list, move the scrollbar up and down. or

. Shuffle Shuffle allows you to listen to songs played on one or more Pandora stations in your station list randomly. Edit your Shuffle station selections on the device before connection. Bookmarking The song or artist currently being played can be bookmarked and stored in your Pandora account. 1 During playback, touch

, then or

. XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 45 Friday, June 15, 2012 2:52 PM Creating a Station A new station can be created based on the song or artist being played. It will be accessible from your Pandora account immediately. 1 During playback, touch

, then or

. Note Pandora limits the number of stations per account. Deleting a Station Stations can be deleted from the station list in order to make room for new stations. 1 During playback, touch

. The station list appears. 2 In the station list, touch

. The delete mode will be activated and checkboxes will be shown next to station names. 3 Check the stations to be deleted and press Delete. A confirmation box will show OK to confirm deletion. 4 Touch OK. Sound Adjustment Selecting the sound quality EQ7 You can select an equalizer curve from 7 music types (Xplod, Vocal, Edge, Cruise, Space, Gravity, Custom, or OFF). 1 During reception/playback, press

(HOME), then touch Settings. The sound setting menu appears. 2 Touch

. 3 Touch EQ7. The options appear. 4 Touch the desired equalizer curve. The setting is complete. To cancel the equalizer curve, select OFF. To return to the previous display, touch

. Note During USB Video playback, you cannot operate the sound adjustment while listening. Customizing the equalizer curve EQ7 Tune The EQ7 Custom curve allows you to make your own equalizer settings. You can adjust the level of 7 different bands: 63 Hz, 160 Hz, 400 Hz, 1 kHz, 2.5 kHz, 6.3 kHz, and 16 kHz. 1 During reception/playback, press

(HOME), then touch Settings. 2 Touch

, then EQ7. Set the equalizer curve to other than OFF. 3 Touch Custom, then Tune >. The tuning display appears. 4 Touch +/ of each frequency to adjust their levels. The level is adjustable in single steps, between 8 and +8. To restore the factory-set equalizer curve, touch Reset. 45 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 46 Friday, June 15, 2012 2:52 PM 5 Touch OK. The setting is complete. Tip Other equalizer types are also adjustable. Adjusting the sound characteristics The sound balance between left and right speakers (Balance) and front and rear speakers

(Fader) can be adjusted to your preference. You can also adjust the volume level of the subwoofer if it is connected. 1 During reception/playback, press

(HOME), then touch Settings. 2 Touch

. The sound setting menu appears. 3 Touch Balance/Fader/Subwoofer. The setting display appears. Optimizing sound for the listening position Intelligent Time Alignment The unit can change the localization of sound by delaying the sound output from each speaker to suit your position, and simulate a natural sound field with the feeling of being in the center of it wherever you sit in the car. The options for Listening Position are indicated below. Front L (1): Front left Front R (2): Front right Front (3): Center front All (4): In the center of your car Custom: Precisely calibrated position (page 47) OFF: No position set 1 2 3 4 4 Touch B/V/v/b to adjust the balance/

fader. The level is adjustable in single steps between 15 and +15 (Balance)/15 and +15 (Fader). 5 Touch +/ to adjust the volume level of the subwoofer. This setting is adjustable only when a subwoofer is connected and Subwoofer is set to ON (page 54). The level is adjustable in single steps, between 6 and +6. To return to the previous display, touch

. 46 You can also set the approximate subwoofer position from your listening position if:

the subwoofer is connected and Subwoofer is set to ON (page 54). the listening position is set to Front L, Front R, Front, or All. 1 During reception/playback, press

(HOME) then touch Settings. 2 Touch

. The sound setting menu appears. 3 Touch Listening Position. The setting display appears. 4 Touch Front L, Front R, Front, or All. 5 Set the subwoofer position. If you select Front L, Front R, Front, or All in step 4 above, you can set the subwoofer position. Touch Near, Normal, or Far. The setting is complete. To customize the listening position, touch Custom >. If you want to restore the default setting, touch Reset. To cancel Intelligent Time Alignment, select OFF. To return to the previous display, touch

. XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 47 Friday, June 15, 2012 2:52 PM Calibrating the listening position Intelligent Time Alignment Tune You can precisely calibrate your listening position from each speaker so that the sound delay reaches the listener more correctly. Before starting, measure the distance between your listening position and each speaker. 1 During reception/playback, press

(HOME) then touch Settings.

, then Listening Position. 2 Touch 3 Touch Custom >. The setting display appears. 4 Touch +/ of each speaker to set the distance between your listening position and the speakers. The distance is adjustable in 2 cm (13/16 in) steps, between 0 and 400 cm (0 and 13 1/10 ft). 5 Touch OK. The setting is complete. To restore the default setting, touch Reset. To return to the previous display, touch

. Note The setting is applied only after OK is touched. Speaker configuration and volume setup Creating a virtual center speaker CSO To fully enjoy surround sound, it is preferable to have 5 speakers (front left/right, rear left/right, center) and 1 subwoofer. CSO (Center Speaker Organizer) allows you to create a virtual center speaker even though a real center speaker is not connected. 1 During DVD playback, touch the display. 2 Touch

. The Disc Option menu appears. 3 Touch CSO (Center Speaker Organizer). The options appear. 4 Touch CSO1, CSO2, or CSO3. The setting is complete. To cancel CSO, touch OFF in step 4. To return to the previous display, touch Note CSO (Center Speaker Organizer) is effective only when Multi Channel Output is set to Multi

(page 56), as it is effective only for playback of multi-

channel sources. Using rear speakers like subwoofers Rear Bass Enhancer Rear Bass Enhancer enhances the bass sound by applying the low pass filter setting (page 53) to the rear speakers. This function allows the rear speakers to work like a pair of subwoofers if one is not connected. 1 During reception/playback, press

(HOME), then touch Settings. 2 Touch

. The sound setting menu appears. 3 Move the scrollbar up and down, then touch RBE (Rear Bass Enhancer). The options appear. 4 Touch RBE1, RBE2, or RBE3. The setting is complete. To cancel RBE, touch OFF in step 4. To return to the previous display, touch

. 47 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 48 Friday, June 15, 2012 2:52 PM Adjusting the speaker volume You can adjust the volume level of each connected speaker. The adjustable speakers are Front R (Front Right), Front L (Front Left), Surround L

(Rear Left), Surround R (Rear Right) and Subwoofer*.

* Adjustable only when a subwoofer is connected and Subwoofer is set to ON (page 54). 1 While no source is selected, press

(HOME), then touch Settings. 2 Touch

. The sound setting menu appears. 3 Move the scrollbar up and down, then touch 4.1ch Speaker Level. The setting display appears. 4 Touch the desired item, then +/ to adjust the level. Repeat this step to adjust each speakers volume. To restore the default setting, touch Reset. To return to the previous display, touch

. 48 Monitor Adjustment Adjusting the monitor angle You can adjust the monitor angle for best viewing. 1 Press and hold Z on the main unit. 2 Touch to adjust the angle.

/

The adjustment is stored. The monitor retains the angle even after the front panel is opened and closed. To return to the previous display, touch

. Touch panel calibration Touch panel calibration is required if the touching position does not correspond with the proper item. 1 Press (HOME), then touch Settings. 2 Touch

. The general setting menu appears. 3 Move the scrollbar up and down, then touch Touch Panel Adjust. The setting display appears. 4 Touch the targets in sequence. The calibration is complete. To cancel calibration, touch Cancel. Adjusting the picture Picture EQ You can adjust the picture to suit the interior brightness of the car. The options are indicated below. Dynamic: Vivid picture with bright, clear colors. Standard: Standard picture. Theater: Brightens the monitor; suitable for darkly-lit movies. Sepia: Applies a sepia tone to the picture. Custom 1, Custom 2: User-adjustable settings (page 49). 1 During video playback, press (HOME), then touch Settings. 2 Touch

. The Visual Settings menu appears. 3 Touch Picture EQ. The options appear. 4 Touch the desired option. XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 49 Friday, June 15, 2012 2:52 PM To return to the previous display, touch Notes This setting is available only when the parking brake

. is set. This setting is not available for USB Video. Customizing the picture The options Custom 1 and Custom 2 of Picture EQ allow you to make your own picture setting by adjusting the picture tones. 1 During video playback, press (HOME), then touch Settings. 2 Touch 3 Touch Custom 1 > or Custom 2 >.

, then Picture EQ. The setting display appears. 4 Touch Warm, Normal, or Cool to select Color Tone. 5 Touch +/ of Brightness and Color to adjust their levels. 6 Touch OK. To return to the previous display, touch Note The picture of the rear view camera cannot be adjusted. Selecting the aspect ratio You can change the screen aspect ratio. The options are indicated below. Normal: Picture with 4:3 aspect ratio (regular picture). Wide: Picture with 4:3 aspect ratio enlarged to the left and right edges of the screen, with overflowing parts of the top and bottom cut off to fill the screen. Full: Picture with 16:9 aspect ratio. Zoom: Picture with 4:3 aspect ratio enlarged to the left and right edges of the screen. 1 During video playback, press (HOME), then touch Settings. The screen setting menu appears. 2 Touch

. 3 Touch Aspect. The options appear. 4 Touch the desired option. To return to the previous display, touch Notes This setting is available only when the parking brake

. is set. The screen aspect ratio of the rear view camera cannot be changed. When you change the screen aspect of USB Video, enter the option menu of USB Video. (page 29) 49 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 50 Friday, June 15, 2012 2:52 PM Settings Basic setting operation The setting menu includes the following categories.

: General Settings (page 51)

: Sound Settings (page 53)

: Visual Settings (page 55)

: Source Settings (page 56) You can set items in the menu via the following procedure. For example, when setting the Key Illumination:

1 Press (HOME), then touch Settings. The setting menu appears. 2 Touch

, and move the scrollbar up and down, then touch Key Illumination. The general setting display appears. 3 Move the scrollbar up and down to select the desired preset color, then press it. The setting is complete. To return to the previous display, touch

. 50 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 51 Friday, June 15, 2012 2:52 PM General Settings Touch Settings c setting operation on page 50. For details, see the pages listed below. z indicates the default setting. c the desired item c the desired option. For details on this procedure, see Basic Item Navigation Source Playback Control Clock Adjust (page 16, 18) Language Name Characters Auto OFF Shuts off automatically after a desired time when no source is selected. Demo Beep Option L-Audio/

R-Nav (z), R-Audio/

L-Nav, Navigation Only English (z), Franais, Espaol, Portugus,

, Nederlands, Deutsch, Italiano Latin Characters

(z), Russian Characters, Simplified Chinese, Traditional Chinese, Korean Characters, Thai Characters OFF (z) 30 sec, 30 min, 60 min ON (z) OFF ON (z) OFF Rotary Commander Changes the operative direction of rotary commander controls. Default (z) Reverse Purpose Unit status To change the Navigation mode. Any status Any status Any status Any status Any status Any status Any status Any status To select the display language. To select the character encoding. To deactivate the Auto Off function. To select the desired time. To activate the demonstration. To deactivate the demonstration. To activate the operation sound. To deactivate the operation sound. To use in the factory-set position. To use on the right side of the steering column. 51 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 52 Friday, June 15, 2012 2:52 PM Option Purpose Unit status Item Key Illumination (page 35) Touch Panel Adjust

(page 48) Camera Input Activates the video input from the connected rear view camera. Rear View Camera Setting

(page 59) Output Color System Changes the color system according to the connected monitor.

(SECAM is not supported.) Bluetooth Connection

(page 38) Bluetooth Initialize*

Firmware Version Open Source Licenses Rainbow (z)

(12 preset colors, customized color and 5 preset patterns) OFF Normal (z) Reverse To change the color of the buttons. To deactivate the input. To display the picture from the rear view camera when the back lamp lights up. To display the picture from the rear view camera when the shift lever is set to the R

(reverse) position. NTSC (z) To set to NTSC. PAL ON OFF (z) To set to PAL. To search from the Bluetooth device. To not connect the Bluetooth device. To initialize the Bluetooth settings. To update the Firmware version. To display the software licenses. Any status Any status Any status Any status No source selected Any status Any status Any status Any status

* Bluetooth Initialize deletes all Bluetooth-related settings such as phonebook data, call history, preset dial, history of connected Bluetooth devices, etc. 52 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 53 Friday, June 15, 2012 2:52 PM Sound Settings Touch Settings c setting operation on page 50. For details, see the pages listed below. z indicates the default setting. c the desired item c the desired option. For details on this procedure, see Basic Item EQ7 (page 45) Balance/Fader/Subwoofer

(page 46) Option OFF (z) Xplod, Vocal, Edge, Cruise, Space, Gravity, Custom Balance :

(15 ~ +15) Fader :

(15 ~ +15) z: 0 Subwoofer:

(6 ~ +6) z: 0 Purpose Unit status To cancel the equalizer curve. To select the equalizer curve; customize the equalizer curve. To adjust the level. To adjust the volume level of the subwoofer.

(Available only when Subwoofer is set to ON.) During reception/

playback During reception/

playback Listening Position (page 46) Sets the listening position and subwoofer position. Front L (z) To set to front left. Front R To set to front right. Front All OFF Subwoofer:

Near, Normal (z), Far Custom RBE (Rear Bass Enhancer)

(page 47) Uses rear speakers like subwoofers. OFF (z), RBE1, RBE2, RBE3 To set to center front. To set to the center of your car. To not set the listening position. To select the subwoofer position. (Available only when Subwoofer is set to ON, and the listening position is set to Front L, Front R, Front, or All.) To precisely calibrate the listening position

(page 47). To select the mode. Any status During reception/

playback 53 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 54 Friday, June 15, 2012 2:52 PM Item Crossover Filter Selects the cut-off frequency of the front/rear speakers

(HPF) and subwoofer (LPF). Subwoofer Sets the subwoofer connection status. 4.1ch Speaker Level

(page 48) Option Purpose Unit status LPF: 50 Hz, 60 Hz, 80 Hz, 100 Hz (z), 120 Hz HPF: OFF (z) HPF: 50 Hz, 60 Hz, 80 Hz, 100 Hz, 120 Hz Subwoofer Phase:

Normal (z), Reverse ON (z) OFF To select the cut-off frequency. (Available only when Subwoofer is set to ON.) To not cut out the frequencies. To select the cut-off frequency. To select the subwoofer phase. (Available only when Subwoofer is set to ON.) To set the connection status to on. To set the connection status to off. During reception/

playback No source selected No source selected 54 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 55 Friday, June 15, 2012 2:52 PM Visual Settings Touch Settings c Basic setting operation on page 50. For details, see the pages listed below. z indicates the default setting. c the desired item c the desired option. For details on this procedure, see Option OFF Auto (z) ON

(5 ~ +5) z: 0 Item Dimmer Changes the display brightness. Dimmer Level Sets the brightness level when the dimmer is activated. Picture EQ*1 (page 48) Aspect*1*2 (page 49) Purpose Unit status To deactivate the dimmer. To dim the display automatically when you turn lights on. (Available only when the illumination control lead is connected.) To dim the display. To select the level. Any status Any status During video playback During video playback Dynamic (z), Standard, Theater, Sepia Custom 1, Custom 2 Normal, Wide, Full (z), Zoom To select the picture quality. To customize the picture quality. To select the screen aspect ratio.

*1 This setting is available only when the parking brake is set.

*2 When you change the screen aspect of USB Video, enter the option menu of USB Video. (page 29) 55 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 56 Friday, June 15, 2012 2:52 PM Source Settings Touch Settings c Basic setting operation on page 50. For details, see the pages listed below. z indicates the default setting. c the desired item c the desired option. For details on this procedure, see Item DVD Direct Search

(page 24) Sets the search item for DVD direct search play. DVD Menu Language DVD Audio Language DVD Subtitle Language Audio DRC Makes the sound clear when the volume is low. Only for a DVD* conforming to Audio DRC (Dynamic Range Control).

* Excluding DVD-R/DVD-R DL/

DVD-RW in VR mode. Multi Channel Output Switches the method of outputting multi channel sources. 56 Option Purpose Unit status Chapter (z) To search for a chapter. Title To search for a title. Any status English (z), Chinese, German, French, Italian, Spanish, Portuguese, Dutch, Danish, Swedish, Finnish, Norwegian, Russian, Other English (z), Chinese, German, French, Italian, Spanish, Portuguese, Dutch, Danish, Swedish, Finnish, Norwegian, Russian, Other English (z), Chinese, German, French, Italian, Spanish, Portuguese, Dutch, Danish, Swedish, Finnish, Norwegian, Russian, Other Standard (z) Wide To change the discs menu language. To change the soundtrack language. To change the subtitle language recorded on the disc. No source selected No source selected No source selected To select the standard setting. To obtain the feeling of being at a live performance. No source selected Multi (z) Stereo To output in 4.1 channels. To downmix to 2 channels. No source selected XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 57 Friday, June 15, 2012 2:52 PM Item Monitor Type Selects an aspect ratio suitable for the connected monitor.

(The screen aspect ratio of this unit also changes.) Depending on the disc, 4:3 Letter Box may be selected automatically instead of 4:3 Pan Scan, and vice versa. Option 16:9 (z) Purpose Unit status To display a wide picture. Suitable when connecting to a wide-screen monitor or a monitor with a wide mode function. 4:3 Letter Box To display a wide picture with bands on the upper and lower positions of the screen. Suitable when connecting to a 4:3 screen monitor. 4:3 Pan Scan To display a wide picture on the entire screen and automatically cut off the portions that do not fit. DVD Playlist Play

(For DVD-R/DVD-R DL/

DVD-RW in VR mode only) Video CD PBC (page 22) Original (z) Playlist ON (z) OFF Multi Disc Resume ON (z) OFF SXM Parental Control

(page 58) Locked Unlocked (z) Source Skip To play titles as they were originally recorded. To play an edited playlist. To play a VCD with PBC functions. To play a VCD without PBC functions. To store the resume settings in memory for up to 5 video* discs.

* DVD VIDEO/VCD/Xvid/

MPEG-4 only. To not store the resume settings in memory. Resume playback is available only for the current disc in the unit. To activate the parental lock. To deactivate the parental lock. To reduce the number of presses required to change sources. Check any unused sources in the Source skip screen. (pages 12, 15) No source selected No source selected No source selected Any status During SiriusXM tuner reception Any status 57 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 58 Friday, June 15, 2012 2:52 PM Using Optional Equipment Auxiliary audio/video equipment You can connect up to 2 optional devices, such as a portable media player, game console, etc., to the AUX1 IN and AUX2 IN terminals on the unit. SiriusXM Connect Tuner By connecting an optional SiriusXM Connect Tuner, you can use the features and functions of the SiriusXM satellite radio (SiriusXM subscriptions sold separately). For more details on services, visit the following web site:

http://www.siriusxm.com/

1 Press (HOME), then touch SXM. Selecting an auxiliary device 1 Press (HOME), then touch AUX. The AUX playback display appears. 2 Touch AUX1 or AUX2 to select the device. Operate via the portable device itself. Adjusting the volume level Be sure to adjust the volume for each connected device before playback. The volume level is common to AUX1 and AUX2. 1 Reduce the volume on the unit. 2 Press (HOME), then touch AUX. The AUX playback display appears. 3 Touch to open the menu, then touch Adjust Input Level. 4 Set your usual listening volume on the unit. 5 Touch /+ repeatedly to adjust the level. The level is adjustable in single steps, between 8 and +18. Setting the type of device By setting the type (video or audio) of each connected device, the background screen can be switched accordingly. 1 Press (HOME), then touch AUX. 2 Touch to open the menu, then touch AUX1 Input or AUX2 Input. 3 Touch Audio or Video. The setting is complete. To return to the previous display, touch

. 58 Selecting Channel List or Category List 1 Press

. The Channel List appears on the display. 2 Touch the desired channel. To scroll the list, touch V/v. 3 Press

. The Category List appears on the display. 4 Touch the desired category. To scroll the list, touch V/v. Storing channels 1 Touch mode. to enter the Preset Edit 2 Select the number that you want to store. Instant Replay Stores up to 90 minutes of broadcast content in the memory of the SiriusXM Connect Tuner. You can perform operations on that stored content, such as playing back music. 1 2 1 3 1 Touch to skip to the next/previous content. Touch and hold to reverse/fast-forward the contents. 2 Touch to pause/resume play after pause. 3 Touch to locate to the current content being broadcast. XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 59 Friday, June 15, 2012 2:52 PM iTunes Tagging You can save the name of a song broadcast from an HD Radio station to this unit with a few easy steps. For details, see iTunes Tagging

(page 18). Parental control Some SiriusXM channels contain content that is not suitable for children. You can enable a parental control passkey for these channels. 1 On the Source Settings (page 56), move the scrollbar up and down to select SXM Parental Control. 2 Enter the passkey, then touch OK. To unblock the channels, enter the passkey. Displaying the SiriusXM Radio ID 1 During playback, touch 2 Enter 000, then touch OK. Rear view camera By connecting the optional rear view camera to the CAMERA terminal, you can display the picture from the rear view camera. The picture from the rear view camera appears when:

the back lamp lights up (or the shift lever is set to the R (reverse) position). you press (HOME) then touch Rear Camera.*

you press (DSPL) repeatedly.*

* The marker lines you edit in Rear view camera settings do not appear. Note When backing up your car, watch the surroundings carefully for safety. Do not depend on the rear view camera exclusively. Tip Even if a rear view camera is connected, you can set the unit to not display the picture from a rear view camera by deactivating the camera input (page 52). Rear view camera settings You can display setting items on the picture from the rear view camera to assist operation. This setting is available only when:

Camera Input is set to Normal or Reverse (page 52). the parking brake is applied. 1 Press (HOME), then touch Settings. 2 Touch

. 3 Move the scrollbar up and down, then touch Rear View Camera Setting. The setting items appear. Displaying marker lines Touch Touch

. again to hide the marker lines. Editing lines 1 Touch

. 2 Select the line to edit. Touch corresponding to the line to edit. or

, 3 Edit the line. To increase the length, touch B b. To reduce the length, touch bB. To adjust the position, touch V or v. To restore the default setting, touch Reset. To return to the previous display, touch

. 59 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 60 Friday, June 15, 2012 2:52 PM Additional Information Precautions Cool off the unit beforehand if your car has been parked in direct sunlight. Power antenna (aerial) extends automatically. Moisture condensation Should moisture condensation occur inside the unit, remove the disc and wait for about an hour for it to dry out; otherwise the unit will not operate properly. To maintain high sound quality Do not splash liquid onto the unit or discs. Notes on LCD panel Do not wet the LCD panel or expose it to liquids. This may cause a malfunction. Do not press on the LCD panel as doing so can distort the picture or cause a malfunction (i.e., the picture may become unclear, or the LCD panel may be damaged). Do not touch other than with the finger, as it may damage or break the LCD panel. Clean the LCD panel with a dry soft cloth. Do not use solvents such as benzine, thinner, commercially available cleaners, or antistatic spray. Do not use this unit outside the temperature range 5 45 C (41 113 F). If your car was parked in a cold or hot place, the picture may not be clear. However, the monitor is not damaged, and the picture will become clear after the temperature in your car becomes normal. Some stationary blue, red or green dots may appear on the monitor. These are called bright spots, and can happen with any LCD. The LCD panel is precision-manufactured with more than 99.99% of its segments functional. However, it is possible that a small percentage (typically 0.01%) of the segments may not light up properly. This will not, however, interfere with your viewing. 60 Notes on discs Do not expose discs to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight. Before playing, wipe the discs with a cleaning cloth from the center out. Do not use solvents such as benzine, thinner, commercially available cleaners. This unit is designed to play discs that conform to the Compact Disc (CD) standard. DualDiscs and some of the music discs encoded with copyright protection technologies do not conform to the Compact Disc (CD) standard, therefore, these discs may not be playable by this unit. Discs that this unit CANNOT play Discs with labels, stickers, or sticky tape or paper attached. Doing so may cause a malfunction, or may ruin the disc. Discs with non-standard shapes (e.g., heart, square, star). Attempting to do so may damage the unit. 8 cm (3 1/4 in) discs. Note on playback operations of DVDs and VCDs Some playback operations of DVDs and VCDs may be intentionally set by software producers. Since this unit plays DVDs and VCDs according to the disc contents the software producers designed, some playback features may not be available. Also, refer to the instructions supplied with the DVDs or VCDs. Notes on DATA CDs and DATA DVDs Some DATA CDs/DATA DVDs (depending on the equipment used for its recording, or the disc condition) may not play on this unit. Finalization is required for some discs (page 61). The unit is compatible with the following standards. For DATA CDs ISO 9660 level 1/level 2 format, Joliet/Romeo in the expansion format Multi Session For DATA DVDs UDF Bridge format (combined UDF and ISO 9660) Multi Border folders). The maximum number of:

folders (albums): 256 (including root and empty files (tracks/videos) and folders contained in a disc: 2,000 (if a folder/file names contain many characters, this number may become less than 2,000). displayable characters for a folder/file name: 64

(Joliet/Romeo). XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 61 Friday, June 15, 2012 2:52 PM Notes on finalizing discs The following discs are required to be finalized to play on this unit. DVD-R/DVD-R DL (in video mode/VR mode) DVD-RW in video mode DVD+R/DVD+R DL CD-R CD-RW The following discs can be played without finalization. DVD+RW automatically finalized. DVD-RW in VR mode finalization not required. For details, refer to the manual supplied with the disc. Notes on Multi Session CDs/Multi Border DVDs This unit can play Multi Session CDs/Multi Border DVDs under the following conditions. Note that the session must be closed and the disc must be finalized. When CD-DA (Compact Disc Digital Audio) is recorded in the first session:

The unit recognizes the disc as CD-DA and only CD-DA of the first session is played, even if another format (e.g., MP3) is recorded in other sessions. When CD-DA is recorded other than in the first session:

The unit recognizes the disc as a DATA CD or DATA DVD, and all CD-DA sessions are skipped. When an MP3/WMA/AAC/Xvid/MPEG-4 is recorded:

Only the sessions containing the selected file type

(audio/video)* are played (if CD-DA or other data exists in other sessions, they are skipped).

* For details on how to select the file type, see page 25. Playback order of MP3/WMA/AAC/

Xvid/MPEG-4 files MP3/WMA/AAC/

Xvid/MPEG-4 Folder

(album) MP3/WMA/AAC/

Xvid/MPEG-4 file (track/

video) About WMA files WMA*1 files meeting the following requirements can be played. Playback is not be guaranteed for all WMA files meeting the requirements. Codec for Disc Media File format: ASF file format File extension: .wma Bit rate: 64 to 192 kbps (Supports variable bit rate

(VBR)) Sampling frequency *2: 44.1 kHz Codec for MSC Media File format: ASF file format File extension: .wma Bit rate: 64 to 192 kbps (Supports variable bit rate

(VBR)) *4 Sampling frequency *2: 44.1 kHz About MP3 files MP3 files meeting the following requirements can be played. Playback is not be guaranteed for all MP3 files meeting the requirements. Codec for Disc Media File format: MP3 (MPEG-1 Layer3) file format

(VBR)) File extension: .mp3 Bit rate: 48 to 192 kbps (Supports variable bit rate Sampling frequency *2: 32, 44.1, 48 kHz Codec for MSC Media File format: MP3 (MPEG-1 Layer3) file format

(VBR)) *4 File extension: .mp3 Bit rate: 32 to 320 kbps (Supports variable bit rate Sampling frequency *2: 32, 44.1, 48 kHz About AAC files AAC*3 files meeting the following requirements can be played. Playback is not be guaranteed for all AAC files meeting the requirements. Codec for Disc Media File format: MP4 file format File extension: .mp4, .m4a, Bit rate: 40 to 320 kbps (Supports variable bit rate

(VBR)) Sampling frequency *2: 44.1, 48 kHz Codec for MSC Media File format: MP4 file format File extension: .mp4, .m4a, .3gp Bit rate: 48 to 288 kbps (Supports variable bit rate

(VBR)) *4 Sampling frequency *2: 8, 11.025, 12, 16, 22.05, 24, 32, 44.1, 48 kHz 61 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 62 Friday, June 15, 2012 2:52 PM About Linear PCM files Linear PCM files meeting the following requirements can be played. Playback is not be guaranteed for all Linear PCM files meeting the requirements. Codec for MSC Media File format: Wave-Riff file format File extension: .wav Bit rate: 1,411 kbps Sampling frequency *2: 44.1 kHz About HE-AAC files HE-AAC files meeting the following requirements can be played. Playback is not be guaranteed for all HE-AAC files meeting the requirements. Codec for MSC Media File format: MP4 file format File extension: .mp4, .m4a, .3gp Bit rate: 32 to 144 kbps *4 Sampling frequency *2: 8, 11.025, 12, 16, 22.05, 24, 32, 44.1, 48 kHz About AVC (H.264/AVC) files AVC (H.264/AVC) files meeting the following requirements can be played. Playback is not be guaranteed for all AVC (H.264/AVC) files meeting the requirements. Codec for MSC Media File format: MP4 file format File extension: .mp4, .m4v Profile: Baseline Profile/Main Profile Level: 3.1 Bit rate: Max. 14 Mbps Frame rate: Max. 30 fps (30p/60i) Resolution: Max. 1,280 x 720 *5 About MPEG-4 files MPEG-4 files meeting the following requirements can be played. Playback is not be guaranteed for all MPEG-4 files meeting the requirements. Codec for Disc Media File format: MP4 file format File extension: .mp4 Profile: Simple Profile Bit rate: Max. 10Mbps on DVD, 7Mbps on CD Frame rate: Max. 30 fps (30p/60i) Resolution: Max. 720 x 576 pixel Media File format: Xvid file format Codec for MSC Media File format: MP4 file format File extension: .mp4, .m4v Profile: Simple Profile 62 Bit rate: Max. 12 Mbps Frame rate: Max. 30 fps (30p/60i) Resolution: Max. 1,280 x 720 *5 Media File format: MP4 file format File extension: .mp4, .m4v Profile: Advanced Simple Profile Bit rate: Max. 8 Mbps Frame rate: Max. 30 fps (30p/60i) Resolution: Max. 720 x 576 *5 About Xvid files Xvid files meeting the following requirements can be played. Playback is not be guaranteed for all Xvid files meeting the requirements. Codec for Disc Media File format: Xvid file format File extension: .avi, .xvid Profile: Advanced Simple Profile Bit rate: Max. 10 Mbps on DVD, 7 Mbps on CD Frame rate: Max. 30 fps (30p/60i) Resolution: Max. 720 x 576 *5 Codec for MSC Media File format: Xvid file format File extension: .avi, .xvid Profile: Advanced Simple Profile Bit rate: Max. 8 Mbps Frame rate: Max. 30 fps (30p/60i) Resolution: Max. 720 x 576 *5 About Windows Media files Windows Media files meeting the following requirements can be played. Playback is not be guaranteed for all Windows Media files meeting the requirements. Codec for MSC Video 9 *1*6 Media File format: ASF file format File extension: .wmv Bit rate: Max. 20 Mbps Frame rate: Max. 30 fps (30p/60i) Resolution: Max. 1,280 x 720 *5 About JPEG files JPEG*7 files meeting the following requirements can be played. Playback is not be guaranteed for all JPEG files meeting the requirements. Codec for MSC Media File format: Compatible with DCF 2.0/Exif 2.21 file format File extension: .jpg, jpeg Profile: Baseline Profile Number of pixels: Max. 6,048 x 4,032 pixels

(24,000,000 pixels)

*1 Copyright protected WMA/WMV files cannot be played back. XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 63 Friday, June 15, 2012 2:52 PM

*2 Sampling frequency may not correspond to all encoders. back.

*3 Copyright protected AAC-LC files cannot be played

*4 Non-standard bit rates or non-guaranteed bit rates are included depending on the sampling frequency.

*5 These numbers indicate the maximum resolution of playable video, and do not indicate the players display resolution. The display resolution is 800 x 480.

*6 Some WMV files can be played back only by transferring using Windows Media Player.

*7 Some photo files cannot be played back, depending on their file formats. About iPod You can connect to the following iPod models. Update your iPod devices to the latest software before use. Made for iPod touch (4th generation) iPod touch (3rd generation) iPod touch (2nd generation) iPod classic iPod nano (6th generation) iPod nano (5th generation) iPod nano (4th generation) iPod nano (3rd generation) iPod nano (2nd generation)*1 iPod nano (1st generation)*1*2 iPhone 4S iPhone 4 iPhone 3GS iPhone 3G 2nd generation models.

*2 Passenger App Control is not available for iPod nano (1st generation). Made for iPod, and Made for iPhone mean that an electronic accessory has been designed to connect specifically to iPod or iPhone respectively and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance. About Bluetooth function What is Bluetooth technology?

Bluetooth wireless technology is a short-range wireless technology that enables wireless data communication between digital devices, such as a cellular phone and a headset. Bluetooth wireless technology operates within a range of about 10 m

(about 33 feet). Connecting two devices is common, but some devices can be connected to multiple devices at the same time. You do not need to use a cable for connection since Bluetooth technology is a wireless technology, neither is it necessary for the devices to face one another, such is the case with infrared technology. For example, you can use such a device in a bag or pocket. Bluetooth technology is an international standard supported by millions of companies all over the world, and employed by various companies worldwide. On Bluetooth communication Bluetooth wireless technology operates within a range of about 10 m. Maximum communication range may vary depending on obstacles (person, metal, wall, etc.) or electromagnetic environment. The following conditions may affect the sensitivity of Bluetooth communication. There is an obstacle such as a person, metal, or wall between this unit and Bluetooth device. A device using 2.4 GHz frequency, such as a wireless LAN device, cordless telephone, or microwave oven, is in use near this unit. Because Bluetooth devices and wireless LAN

(IEEE802.11b/g) use the same frequency, microwave interference may occur and result in communication speed deterioration, noise, or invalid connection if this unit is used near a wireless LAN device. In such as case, perform the following. Use this unit at least 10 m away from the wireless LAN device. If this unit is used within 10 m of a wireless LAN device, turn off the wireless LAN device. Install this unit and Bluetooth device as near to Microwaves emitting from a Bluetooth device may affect the operation of electronic medical devices. Turn off this unit and other Bluetooth devices in the following locations, as it may cause an accident. where inflammable gas is present, in a hospital, train, airplane, or petrol station near automatic doors or a fire alarm This unit supports security capabilities that comply with the Bluetooth standard to provide a secure connection when the Bluetooth wireless technology is used, but security may not be enough depending on the setting. Be careful when communicating using Bluetooth wireless technology. We do not take any responsibility for the leakage of information during Bluetooth communication. Connection with all Bluetooth devices cannot be guaranteed. A device featuring Bluetooth function is required to conform to the Bluetooth standard specified by Bluetooth SIG, and be authenticated. Even if the connected device conforms to the above mentioned Bluetooth standard, some devices may not be connected or work correctly, depending on the features or specifications of the device.

*1 iTunes Tagging is not available for iPod nano 1st or each other as possible. 63 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 64 Friday, June 15, 2012 2:52 PM While talking on the phone handsfree, noise may occur, depending on the device or communication environment. Depending on the device to be connected, it may require some time to start communication. Others Using the Bluetooth device may not function on cellular phones, depending on radio wave conditions and location where the equipment is being used. If you experience discomfort after using the Bluetooth device, stop using the Bluetooth device immediately. Should any problem persist, consult your nearest Sony dealer. If you have any questions or problems concerning your unit that are not covered in these Operating Instructions, consult your nearest Sony dealer. Maintenance Replacing the lithium battery of the remote commander Under normal conditions, the battery will last approximately 1 year. (The service life may be shorter, depending on the conditions of use.) When the battery becomes weak, the range of the remote commander becomes shorter. Replace the battery with a new CR2025 lithium battery. Use of any other battery may present a risk of fire or explosion.

+ side up c Notes on the lithium battery Keep the lithium battery out of the reach of children. Should the battery be swallowed, immediately consult a doctor. Wipe the battery with a dry cloth to assure a good contact. Be sure to observe the correct polarity when installing the battery. Do not hold the battery with metallic tweezers, otherwise a short-circuit may occur. WARNING Battery may explode if mistreated. Do not recharge, disassemble, or dispose of in fire. 64 Fuse replacement When replacing the fuse, be sure to use one matching the amperage rating stated on the original fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer. Fuse (10A) Removing the unit 1 Insert both release keys simultaneously until they click. Hook facing inwards. 2 Pull the release keys to unseat the unit. 3 Slide the unit out of the mounting. XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 65 Friday, June 15, 2012 2:52 PM Specifications FOR UNITED STATES CUSTOMERS. NOT APPLICABLE IN CANADA, INCLUDING IN THE PROVINCE OF QUEBEC. POUR LES CONSOMMATEURS AUX TATS-UNIS. NON APPLICABLE AU CANADA, Y COMPRIS LA PROVINCE DE QUBEC. AUDIO POWER SPECIFICATIONS CEA2006 Standard Power Output: 17 Watts RMS 4 Ohms < 1% THD+N SN Ratio: 80 dBA

(reference: 1 Watt into 4 Ohms) 4 at Monitor section Display type: Wide LCD color monitor Dimensions: 7.0 in System: TFT active matrix Number of pixels:

1,152,000 pixels (800 u 3 (RGB) u 480) Color system:

PAL/NTSC/SECAM/PAL-M/PAL-N automatic select Tuner section FM Tuning range: 87.5 107.9 MHz Antenna (aerial) terminal:

External antenna (aerial) connector Intermediate frequency: 25 kHz Usable sensitivity: 9 dBf Selectivity: 75 dB at 400 kHz Signal-to-noise ratio(stereo):

77dB (Conventional broadcast) 78dB (HD Radio broadcast) Separation at 1 kHz:

50 dB (Conventional broadcast) 78 dB (HD Radio broadcast) Frequency response:

20 15,000 Hz (Conventional broadcast) 20 20,000 Hz (HD Radio broadcast) AM Tuning range: 530 1,710 kHz Antenna (aerial) terminal:

External antenna (aerial) connector Intermediate frequency:

9,115 kHz or 9,125 kHz/5 kHz Sensitivity: 26 V DVD/CD Player section Signal-to-noise ratio: 120 dB Frequency response: 10 20,000 Hz Wow and flutter: Below measurable limit Harmonic distortion: 0.01%

Region code: Labeled on the bottom of the unit USB Player section Interface: USB (High-speed) Maximum current: 1 A Wireless Communication Communication System:

Bluetooth Standard version 2.1 + EDR Output:

Maximum communication range:

Line of sight approx. 10 m (33 ft)*1 Frequency band:

2.4 GHz band (2.4000 2.4835 GHz) Modulation method: FHSS Compatible Bluetooth Profiles*2:

Bluetooth Standard Power Class 2 (Max. +4 dBm) A2DP (Advanced Audio Distribution Profile) 1.2 AVRCP (Audio Video Remote Control Profile) 1.3 HFP (Handsfree Profile) 1.5 PBAP (Phone Book Access Profile) OPP (Object Push Profile)

*1 The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, reception sensitivity, antennas performance, operating system, software application, etc.

*2 Bluetooth standard profiles indicate the purpose of Bluetooth communication between devices. Power amplifier section Outputs: Speaker outputs Speaker impedance: 4 8 ohms Maximum power output: 52 W u 4 (at 4 ohms) General Outputs:

Video output terminal (rear) Audio output terminals (front/rear) Audio output terminal (ZuZ) Subwoofer output terminal Power antenna (aerial)/Power amplifier control terminal (REM OUT) Inputs:

Illumination control terminal SiriusXM input terminal Remote controller input terminal Antenna (aerial) input terminal Parking brake control terminal Microphone input terminal Reverse input terminal Speed input terminal Camera input terminal AUX audio input terminals AUX video input terminals Component Video input terminal (for iPod/iPhone) USB port Power requirements: 12 V DC car battery Dimensions: Approx. 178 u 100 u 185 mm Mounting dimensions: Approx. 182 u 111 u 160 mm

(negative ground (earth))

(7 1/8 u 4 u 7 3/8 in) (w/h/d)

(7 1/4 u 4 3/8 u 6 3/8 in) (w/h/d) Mass: Approx. 2.4 kg (5 lb 5 oz) Supplied accessories:

Parts for installation and connections (1 set) Microphone Remote Commander: RM-X271 USB and Component Video connection cable for iPod/iPhone: RC-300ICPV Optional accessories/equipment:

65 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 66 Friday, June 15, 2012 2:52 PM Mobile monitor: XVM-B62 Rear View Camera: XA-R800C Navigation Module: XA-NV100T Your dealer may not handle some of the above listed accessories. Please ask the dealer for detailed information. US and foreign patents licensed from Dolby Laboratories. MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson. Design and specifications are subject to change without notice. Region code The region system is used to protect software copyrights. The region code is located on the bottom of the unit, and only DVDs labeled with an identical region code can be played on this unit. DVDs labeled ALL can also be played. If you try to play any other DVD, the message Disc playback prohibited by region code. will appear on the monitor screen. Depending on the DVD, no region code may be labeled even though playing the DVD is prohibited by area restrictions. Troubleshooting The following checklist will help you remedy problems you may encounter with your unit. Before going through the checklist below, check the connection and operating procedures. If the problem is not solved, visit the support site on the back cover. General No power is being supplied to the unit. Check the connection or fuse. If the unit is turned off and the display disappears, it cannot be operated with the remote commander. t Turn on the unit. The power antenna (aerial) does not extend. The power antenna (aerial) does not have a relay box. There is no beep sound. The beep sound is canceled (page 51). An optional power amplifier is connected and you are not using the built-in amplifier. The contents of the memory have been erased. The reset button has been pressed. t Store again into the memory. The power supply lead or battery has been disconnected or it is not connected properly. 66 Stored stations and correct time are erased. The fuse has blown. The unit makes noise when the position of the ignition is switched. The leads are not matched correctly with the cars accessory power connector. The display disappears from/does not appear on the monitor. The dimmer is set to ON (page 55). The display disappears if you press and hold

(SOURCE/OFF). t Press (SOURCE/OFF) on the unit until the display appears. M.OFF is set to on and the Monitor Off function is activated (page 12). t Touch anywhere on the display to turn the display back on. The display does not respond to your touch correctly. Touch one part of the display at a time. If two or more parts are touched simultaneously, the display will not operate correctly. Calibrate the touch panel of the display (page 48). Touch the pressure sensitive panel firmly. The Auto Off function does not operate. The unit is turned on. The Auto Off function activates after turning off the unit. t Exit the source. The menu items cannot be selected. Unavailable menu items are displayed in gray. USB Music, USB Video, AUX, BT Audio and Pandora cannot be selected as the source. Some sources are not displayed on the Source select screen. t Remove the check mark from the source item you cannot select (page 57). The monitor angle cannot be adjusted. The monitor was opened while the unit was being reset. t Be sure to close the front panel before you reset the unit. Radio reception The stations cannot be received. The sound is hampered by noises. The connection is not correct. t Connect an REM OUT lead (blue/white striped) or accessory power supply lead (red) to the power supply lead of a cars antenna (aerial) booster

(only when your car has built-in radio antenna

(aerial) in the rear/side glass). t Check the connection of the car antenna (aerial). t If the auto antenna (aerial) will not extend, check the connection of the power antenna (aerial) control lead. Preset tuning is not possible. Store the correct frequency in the memory. The broadcast signal is too weak. XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 67 Friday, June 15, 2012 2:52 PM Automatic tuning is not possible. The broadcast signal is too weak. t Perform manual tuning. Sound skips or repeats. This may happen while this unit switches from analog signal to digital signal or vice versa, because the radio station does not synchronize the signal. RDS PTY displays None. The current station is not an RDS station. RDS data has not been received. The station does not specify the program type. Picture There is no picture/picture noise occurs. A connection has not been made correctly. Check the connection to the connected equipment, and set the input selector of the equipment to the source corresponding to this unit. The disc is defective or dirty. Installation is not correct. t Install the unit at an angle of less than 45 in a sturdy part of the car. The parking cord (light green) is not connected to the parking brake switch cord, or the parking brake is not applied. The picture does not fit in the screen. The aspect ratio is fixed on the DVD. There is no picture/picture noise occurs in the rear monitor. A source/mode which is not connected is selected. If there is no input, no picture appears in the rear monitor. The color system setting is incorrect. t Set the color system to PAL or NTSC according to the connected monitor (page 52). The picture of the rear view camera is displayed on this unit. t No picture appears in the rear monitor if the picture of the rear view camera is displayed on this unit. Sound There is no sound/sound skips/sound cracks. A connection has not been made correctly. Check the connection to the connected equipment, and set the input selector of the equipment to the source corresponding to this unit. The disc is defective or dirty. Installation is not correct. t Install the unit at an angle of less than 45 in a sturdy part of the car. The MP3 file sampling rate is not 32, 44.1, or 48 kHz. The WMA file sampling rate is not 32, 44.1, or 48 kHz. The AAC file sampling rate is not 44.1 or 48 kHz. The MP3 file bit rate is not 48 to 192 kbps. The WMA file bit rate is not 64 to 192 kbps. The AAC file bit rate is not 40 to 320 kbps. The unit is in pause/reverse/fast-forward mode. The settings for the outputs are not made correctly. The DVD output level is too low (page 23). The volume is too low. The ATT function is activated. The format is not supported (such as DTS). t Check if the format is supported by this unit

(page 11). Sound is noisy. Keep cords and cables away from each other. Disc operation The disc cannot be loaded. Another disc is already loaded. The disc has been forcibly inserted upside down or in the wrong way. The disc does not play. The disc is defective or dirty. The disc is not playable. The DVD is not playable due to the region code. The disc is not finalized (page 61). The disc format and file version are incompatible with this unit (page 11, 60). Press Z to remove the disc. MP3/WMA/AAC/Xvid/MPEG-4 files do not play. Recording was not performed according to the ISO 9660 level 1 or level 2 format or the Joliet or Romeo expansion format (DATA CD), or the UDF Bridge format (DATA DVD) (page 60). The file extension is incorrect (page 61). Files are not stored in MP3/WMA/AAC/Xvid/

MPEG-4 format. If the disc contains multiple file types, only the selected file type (audio/video) can be played. t Select the appropriate file type using the list

(page 25). MP3/WMA/AAC/Xvid/MPEG-4 files take longer to play than others. The following discs take a longer time to start playback. a disc recorded with a complicated tree structure. a disc recorded in Multi Session/Multi Border. a disc to which data can be added. 67 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 68 Friday, June 15, 2012 2:52 PM The disc does not start playing from the beginning. Resume playback or multi-disc resume playback

(page 57) has taken effect. Certain functions cannot be performed. Depending on the disc, you may not be able to perform operations such as stop, search, or repeat/shuffle play. For details, refer to the manual supplied with the disc. The soundtrack/subtitle language or angle cannot be changed. Use the DVD menu instead of the direct selection button on the remote commander (page 20). Multilingual tracks, multilingual subtitles, or multi-

angles are not recorded on the DVD. The DVD prohibits changing. The operation buttons do not function. The disc will not eject. Press the reset button (page 15). USB playback Items cannot be played via a USB hub. This unit cannot recognize USB devices via a USB hub. Items cannot be played. Reconnect the USB device. The USB device takes longer to play. The USB device contains large-sized files or files with a complicated tree structure. The sound is intermittent. The sound may be intermittent at a high bit rate of more than 320 kbps. During USB Video playback, if the playback is intermittent:

Press (HOME) or launch the System settings. During the USB Photo, (Navigation), etc. Bluetooth function The other Bluetooth device cannot detect this unit. Set Signal to ON (page 43). While connecting to a Bluetooth device, this unit cannot be detected from another device. Disconnect the current connection and search for this unit from the other device. The disconnected device can be reconnected by selecting from the list of registered devices. Connection is not possible. Check the pairing and connection procedures in the manual of the other device, etc., and perform the operation again. The name of the detected device does not appear. Depending on the status of the other device, it may not be possible to obtain the name. There is no ringtone. Raise the volume while receiving a call. Depending on the connecting device, the ringtone may not be sent properly. t Set Ringtone to Internal (page 42). 68 The talkers voice volume is low. Raise the volume during a call. The other party says that the volume is too low or high. Adjust the MIC Gain level (page 40). Echo or noise occurs during call conversations. Reduce the volume. Speech Quality is set to Mode 1. t Set Speech Quality to Mode 2 (page 42). If ambient noise other than the phone call sound is loud, try reducing this noise. t Shut the window if road noise is loud. t Lower the air conditioner if the air conditioner is loud. The phone sound quality is poor. Phone sound quality depends on reception conditions of the cellular phone. t Move your car to a place where you can enhance the cellular phones signal if the reception is poor. The volume of the connected Bluetooth device is low or high. Volume level will differ depending on the Bluetooth device. t Reduce the volume level differences between this unit and the Bluetooth device (page 43). No sound is output during audio streaming. The connected Bluetooth device is paused. t Cancel pause of the Bluetooth device. The sound skips during audio streaming. Reduce the distance between the unit and the Bluetooth device. If the Bluetooth device is stored in a case which interrupts the signal, remove the case while using the device. Several Bluetooth devices or other devices which emit radio waves are used nearby. t Turn off the other devices. t Increase the distance from the other devices. The playback sound stops momentarily when this unit is connecting to a cellular phone. This is not a malfunction. You cannot control the connected Bluetooth device during audio streaming. Check that the connected Bluetooth device supports AVRCP. Some functions do not work. Check that the connecting device supports the functions in question. The name of the other party does not appear when a call is received. The other party is not stored in the phonebook. t Add the other party to the phonebook (page 41). The calling phone is not set to send the phone number. A call is answered unintentionally. The connecting phone is set to start a call automatically. Auto Answer of this unit is set to 3 sec or 10 sec (page 42). XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 69 Friday, June 15, 2012 2:52 PM Pairing failed due to time out. Depending on the connecting device, the time limit for pairing may be short. Try completing the pairing within the time by setting a single digit passkey. The Bluetooth function cannot be operated. Exit the source by pressing and holding

(SOURCE/OFF) for 1 second, then turn on the unit. No sound is output from the car speakers during a handsfree call. If the sound is output from the cellular phone, set the cellular phone to output the sound from the car speakers. Error displays/messages An error occurred. You will be returned to the playback screen. Visualizer is not operating due to an internal error. t Change to another source, then select USB Music. Bluetooth Connection Error An error has occurred between this unit and the BT phone. t Check the BT signal is set to ON for this unit or the BT phone. t Try pairing again. t Reconnect the BT phone. Bluetooth device is not found. The unit cannot detect a connectable Bluetooth device. t Check the Bluetooth setting of the connecting device. No device is in the list of registered Bluetooth device. t Perform pairing with a Bluetooth device

(page 38). Busy now Please try again. The unit is busy. t Wait for a moment and try again. Call Data Error An error has occurred while accessing phonebook data via PBAP or call history from the BT phone. t Reconnect the BT phone. Cannot display folders beyond this level. Place songs no more than eight folders deep. While browsing contents, a level beyond eight was selected. t This unit can display folders a maximum of eight folders deep. Transfer contents beyond this level. Cannot read. The unit cannot read the data due to some problem. The data is damaged or corrupted. The disc is corrupted. The disc is incompatible with this unit. The disc is not finalized. Database error encountered. A database error was encountered due to a problem. t Change to another source, then select USB Music. Database update couldnt be completed. Database update was canceled due to a problem. t Try to update the database again. Data Listing Error An error has occurred while displaying phonebook data via PBAP or call history from the BT phone. t Reconnect the BT phone. Delete failed. Video contents cannot be deleted due to a problem. t Try to delete it again. Otherwise, delete it using a PC, etc. Disc Error The disc is dirty or inserted upside down. t Clean or insert the disc correctly. A blank disc has been inserted. The disc cannot play due to a problem. t Insert another disc. The disc is not compatible with this unit. t Insert a compatible disc. Press Z to remove the disc. Disc playback prohibited by region code. The DVDs region code differs from the units region code. Error - Please select Bluetooth Initialize from the General Settings menu. A memory error has occurred. t Initialize the Bluetooth setting (page 43). Handsfree device is not available. A cellular phone is not connected. t Connect a cellular phone (page 38). High Temperature Error An error has occurred due to a high temperature. t Lower the temperature. iPod video cable reconnected. Reconnect the USB cable. The iPod video cable is unplugged and plugged. t Unplug the USB cable, then plug it in again. New firmware not found. There is no firmware update available in the USB memory. t Try to update to the latest version of firmware. The firmware file is damaged or corrupted. t Rewrite the file in the USB memory. No audio, confirm smartphone compatibility. The sound adjustment of the smartphone is incorrect. t Check the smartphones sound adjustment. The smartphone is not compatible with MirrorLink. t Check the smartphones compatibility with MirrorLink (page 35). No Device iPod is selected as source without an iPod connected. A USB connection cable with iPod connected has been removed during playback. t Be sure to connect the USB connection cable and the iPod securely. No Playable Data The disc does not contain playable data. The iPod has no playable data. t Insert a music or video file into the iPod. 69 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 70 Friday, June 15, 2012 2:52 PM No Navigation Signal Navigation is not connected with this unit. t Check the connection with this unit and Navigation. Navigation is not operating correctly. t Check the Navigation is operating correctly. Offset There may be an internal malfunction. t Check the connection. If the error indication remains on the display, consult your nearest Sony dealer. Output connection failure.

(Displays until any button is pressed.) The connection of speakers/amplifiers is incorrect. t See the supplied Installation/Connections guide to check the connection. Overcurrent caution on USB. The USB device is overloaded. t Disconnect the USB device, then change the source by pressing (SOURCE/OFF). t Indicates that the USB device is out of order, or an unsupported device is connected. Playback has stopped because an error occurred. Playback of video contents stopped due to a problem. t Select another source, then select USB Video. Reestablish your smartphone connection. The smartphone is not connected with this unit. t Check the connection between this unit and the smartphone. The smartphone is turned off. t Check the power supply of the smartphone. The smartphone is not compatible with MirrorLink. t Check the smartphones compatibility with MirrorLink (page 35). Remove failed. Photo contents cannot be deleted due to a problem. t Try to delete it again. Otherwise delete it by using PC, etc. Screen content blocked while vehicle in motion. MirrorLink is being operated while driving. t Some MirrorLink functions are restricted while driving. Set wallpaper failed. The file is damaged or corrupted. t Select another photo. The file size is too large. t Minimize the size of the picture, then try again. Smartphone Connection Error The smartphone is not connected with this unit. t Check the connection between this unit and the smartphone. The smartphone is turned off. t Check the power supply of the smartphone. The smartphone is not compatible with MirrorLink. t Check the smartphones compatibility with MirrorLink (page 35). 70 The application will quit because an error occurred. An internal error has occurred. t Change to another source, then select USB Music. The playback list is empty. The playlist contains unplayable files. t Check if any contents in the USB application are playable. The sound in DTS format is not audible. Discs in DTS format are not supported. Sound is not output if the DTS format is selected. t DTS formatted discs are not playable on this unit. Use a compatible disc format (page 11). USB device not supported For details on the compatibility of your USB device, visit the support site on the back cover. USB hub not supported USB hubs are not supported on this unit. The character cannot be displayed with the unit. For HD Radio:

Internal memory full. Connect iPod to transfer tags. iTunes tags cannot be registered due to insufficient memory. t After connecting iPod, transfer the iTunes tags to iPod to secure the memory of the unit. iTunes tag already stored. An iTunes tag already registered is attempted to register again. iTunes tag delete failed. An iTunes tag cannot be deleted due to a problem. t Try to delete it again. iTunes tag failed. An iTunes tag cannot be registered due to a problem. t Try to register it again. Linking The reception of supplemental program become poor. t Move to an area with better reception. t Select the other stations with better receptions. For Telenav:

No Video Signal The video connection cable of iPod is not connected to the unit, or no video signal is being output. t Make sure iPod and the unit are securely connected. XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 71 Friday, June 15, 2012 2:52 PM Please launch Telenav application on mobile device. Telenav application on the iPhone is not launched. t Install the Telenav application (if not instaled), then launch the application. iPhone is not connected to the unit with the connection cable. t Connect iPhone and the unit securely with the connection cable. Telenav application on the iPhone is running in the background. t Activate the application on the iPhone. iPhone and the unit cannot communicate properly due to a problem. t Disconnect the cable, and connect it again, then launch the application. For Pandora internet radio:

Allow connection? Check number on mobile device. Check the number on your mobile device. If the number is correct, touch OK to allow the connection. Already bookmarked A station already bookmarked is attempted to bookmark again. API Version Error The API versions differ. t Select a source other than Pandora, then select the Pandora source again. Application error on mobile device. Do not check the mobile device while driving. If your mobile device has a problem, make sure your car is parked in a safe place. t Check other operations on your mobile device, then launch the Pandora application again. t Select a source other than Pandora, then select the Pandora source again. Bookmark Error Bookmarking a track or artist failed. t Try bookmarking again. Cannot connect Pandora due to poor reception. The mobile network signal is poor. t Move to an area with better reception. Cannot skip. Skip (Next) is prohibited for the current content. t Wait until the commercial ends. t Pandora limits the number of skips allowed. Wait until the next song begins, or select another station on the list. Invalid Login The mobile device has not logged in to Pandora. t Try logging in again. No Station There is no station on your Pandora account. t Create a station on your mobile device. t Select a source other than Pandora, then select the Pandora source again. Pandora Error An error occurred while using Pandora. t Disconnect, then reconnect the mobile device with this unit.

(For a USB device, unplug and plug into the device again. For a Bluetooth device, disconnect and connect the device again.) t Launch the Pandora application again from the mobile device. Pandora original licensing restricted. Use the service is being attempted outside the US. t Pandora service license has been granted in the US only. Please disconnect and reconnect to sync device. An error has occurred between this unit and the mobile device. t Disconnect then reconnect the mobile device with this unit.

(For USB device, unplug and plug into the device again. For a Bluetooth device, disconnect and connect the device again.) Please launch Pandora application on mobile device and touch Connect. The Pandora application has not been launched. t Launch Pandora on your mobile device, then touch Connect. Server Error The Pandora server may have a problem. t Select a source other than Pandora, then select the Pandora source again. Station does not exist. The condition of the mobile device has changed between compiling the station list and selecting from the list. t Wait until the station list refreshes. Thumbs Up/Down Error Thumbs Up/Down feedback failed. t Try Thumbs Up/Down again. For SiriusXM:

Channel Locked The selected channel is locked by the parental control function. Channel not included in current subscription. The subscription to the active channel has been terminated. t Check the subscription of SiriusXM channel map. Channel not subscribed.Call Sirius XM to subscribe. There is no subscription to the selected channel. t Process the subscription in SiriusXM. Check SXM antenna. The antenna (aerial) is not being used properly. t Make sure the antenna (aerial) is connected and being used properly. 71 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Left 00US+00COV-U.book Page 72 Friday, June 15, 2012 2:52 PM Check SXM tuner. The SiriusXM Connect tuner is not functioning properly. t Disconnect the SiriusXM Connect tuner, and connect it again. Current channel unavailable. The active channel has become unavailable. t Check the SiriusXM channel map. Invalid Language Code Passkey input failed. t Check that the passkey has been entered correctly. Invalid Parental Code Passkey input failed. t Check that the passkey has been entered correctly. No Signal The service is stopped due to a signal interruption. t Move to another area with better reception. t Unplug the SiriusXM tuner, then plug it in again. Requested channel not available. The active channel has become unavailable. The selected channel is not available. t Check the SiriusXM channel map. SXM instant playback buffer exceeded. The point attempted to play back has not been stored yet. t Wait until the desired point of contents stored. If these solutions do not help improve the situation, consult your nearest Sony dealer. If you take the unit to be repaired because of disc playback trouble, bring the disc that was used at the time the problem began. 72 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 73 Friday, June 15, 2012 2:52 PM Language code list Language code list The language spellings conform to the ISO 639: 1988 (E/F) standard. Code Language Code Language Code Language Code Language 1027 1028 1032 1039 1044 1045 1051 1052 1053 1057 1059 1060 1061 1066 Afar Abkhazian Afrikaans Amharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali;

Bangla Tibetan 1067 Breton 1070 Catalan 1079 Corsican 1093 1097 Czech 1103 Welsh Danish 1105 1109 German Bhutani 1130 Greek 1142 English 1144 Esperanto 1145 Spanish 1149 1150 Estonian Basque 1151 Persian 1157 Finnish 1165 Fiji 1166 1171 Faroese French 1174 1181 Frisian 1183 1186 1194 1196 1203 1209 1217 1226 1229 1233 1235 1239 1245 1248 1253 1254 1257 1261 1269 1283 1287 1297 1298 1299 1300 1301 1305 1307 1311 1313 1326 1327 1332 1334 Irish Scots Gaelic Galician Guarani Gujarati Hausa Hindi Croatian Hungarian Armenian Interlingua Interlingue Inupiak Indonesian Icelandic Italian Hebrew Japanese Yiddish Javanese Georgian Kazakh Greenlandic Cambodian Kannada Korean Kashmiri Kurdish Kirghiz Latin Lingala Laothian Lithuanian Latvian;

Lettish 1345 Malagasy 1347 Maori 1349 Macedonian 1350 Malayalam 1352 Mongolian 1353 Moldavian 1356 Marathi 1357 Malay 1358 Maltese Burmese 1363 Nauru 1365 Nepali 1369 Dutch 1376 1379 Norwegian Occitan 1393

(Afan)Oromo 1403 Oriya 1408 Punjabi 1417 1428 Polish Pashto;

1435 Pushto Portuguese Quechua Rhaeto-

Romance Kirundi Romanian Russian Kinyarwanda Sanskrit Sindhi Sangho Serbo-

Croatian Singhalese Slovak Slovenian 1482 1483 1489 1491 1495 1498 1501 1502 1436 1463 1481 1503 1505 1506 Samoan Shona Somali Albanian Serbian Siswati Sesotho Sundanese Swedish Swahili Tamil Telugu Tajik Thai Tigrinya Turkmen Tagalog Setswana Tonga Turkish Tsonga Tatar Twi Ukrainian Urdu Uzbek Vietnamese Volapk 1507 1508 1509 1511 1512 1513 1514 1515 1516 1517 1521 1525 1527 1528 1529 1531 1532 1534 1535 1538 1539 1540 1543 1557 1564 1572 1581 1587 1613 Wolof Xhosa 1632 Yoruba 1665 Chinese 1684 1697 Zulu 1703 Not specified 73 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:None 00US+00COV-U.book Page 74 Friday, June 15, 2012 2:52 PM XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\01US_XAV701HD\01US02CD-U.fm masterpage:None 00US+00COV-U.book Page 75 Friday, June 15, 2012 2:52 PM XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR01INT-U.fm masterpage:Left 00US+00COV-U.book Page 2 Friday, June 15, 2012 2:52 PM Cet metteur est conforme aux limitations concernant lexposition aux radiations tablies par la FCC/IC dfinies dans un environnement non contrl ainsi quaux directives relatives lexposition aux frquences radio (RF) FCC du supplment C du bulletin OET65 et au rglement CNR-102 relatif lexposition aux radiofrquences (RF) IC. Cet quipement prsente des niveaux dnergie RF trs bas considrs comme conformes et ne ncessite pas dvaluation dexposition maximale admise

(MPE). Il est toutefois souhaitable de linstaller et lutiliser en laissant lappareil rayonnant une distance dau moins 20 cm de votre corps (sans compter les extrmits : mains, poignets, pieds et jambes). Uniquement pour ltat de la Californie, tats-Unis Matriaux de perchlorate une manutention spciale peut sappliquer. Voir www.dtsc.ca.gov/hazardouswaste/perchlorate Matriaux de perchlorate : La pile au lithium contient du perchlorate Avertissement si le contact de votre vhicule ne comporte pas de position ACC Veillez activer la fonction Auto Off (arrt automatique) (page 52). Lorsquaucune source nest slectionne, lappareil se met automatiquement hors tension aprs un dlai donn, ce qui empche dpuiser la batterie. Si vous nactivez pas la fonction darrt automatique, appuyez sur la touche

(SOURCE/OFF) et maintenez-la enfonce jusqu ce que laffichage disparaisse chaque fois que vous coupez le contact. Pour annuler laffichage de dmonstration

(Dmo), reportez-vous la page 52. Pour votre propre scurit, assurez-vous dinstaller cet appareil dans le tableau de bord de la voiture. Pour linstallation et les connexions, consultez le guide Installation/

Raccordement fourni. Avertissement Pour prvenir les risques dincendie ou dlectrocution, tenir cet appareil labri de la pluie ou de lhumidit. Ne pas ouvrir le botier pour viter un choc lectrique. Confier la rparation de lappareil un technicien qualifi uniquement. ATTENTION Lutilisation dinstruments optiques avec cet appareil augmente le danger pour les yeux. Ne pas tenter de dsassembler le botier de lappareil tant donn que le faisceau laser utilis dans ce lecteur CD/DVD est dangereux pour les yeux. Confier la rparation de lappareil un technicien qualifi uniquement. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et

(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Cet quipement ne doit pas tre plac au mme endroit ni utilis avec une autre antenne ou un autre metteur. Conformment la rglementation dIndustrie Canada, le prsent metteur radio peut fonctionner avec une antenne dun type et dun gain maximal (ou infrieur) approuv pour lmetteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique lintention des autres utilisateurs, il faut choisir le type dantenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas lintensit ncessaire ltablissement dune communication satisfaisante. 2 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR+00COV-

UTOC.fm 00US+00COV-U.book Page 3 Friday, June 15, 2012 2:52 PM masterpage:Right Table des matires Remarques sur la scurit . 6 Recherche directe . 23 Remarques sur linstallation . 6 Droits dauteur. 6 Remarques sur la fonction Bluetooth . 8 Avis au sujet de la licence . 8 Affichage de la liste des plages/fichiers vido Liste . 23 Slection dune plage/dun fichier vido. 23 Slection dun type de fichier . 23 Disques et types de fichier pouvant tre lus . 9 USB Musique Emplacement et fonction des commandes. 10 Appareil principal . 10 Tlcommande RM-X271 . 12 Prparation Rinitialisation de lappareil . 14 Rglage initial . 14 Rglage de lhorloge . 14 Prparation de la tlcommande . 14 Radio coute de la radio . 15 Commandes de rception . 15 Indications pendant la rception . 16 Mmorisation et rception des stations . 16 Mmorisation automatique BTM. 16 Mmorisation manuelle . 17 Rception des stations mmorises. 17 propos de la multidiffusion FM . 17 iTunes Tagging . 17 Utilisation de ltiquetage iTunes Tagging . 17 Disques Lecture de disques . 19 Commandes de lecture . 19 Indications de lecture . 20 Utilisation des fonctions PBC (contrle de la lecture) . 21 Configuration des paramtres audio . 21 Modification de la langue/du format du son . 21 Changement du canal audio . 22 Rglage du niveau de sortie audio Niveau Dolby D . 22 Lecture rpte et alatoire . 22 Lecture de musique. 24 Commandes de lecture . 24 Options . 24 Lecture rpte et alatoire . 24 Slection des fichiers de musique. 25 Slection des chansons partir de la bibliothque . 25 Profitez de la musique en fonction de votre humeur SensMe . 25 Installation de Media Go sur votre ordinateur . 25 Transfert de plages vers le priphrique USB laide de Media Go . 25 Lecture des plages dans les canaux Station SensMe . 26 Slection dun album par illustration de pochette. 26 Options . 26 USB Vido Lecture de vido . 27 Commandes de lecture . 27 Options . 28 Slection des fichiers vido . 28 Options . 29 USB Photo Affichage des photos . 29 Commandes de lecture . 29 Options . 30 Slection des fichiers de photo . 30 Options . 30 3 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR+00COV-

UTOC.fm 00US+00COV-U.book Page 4 Friday, June 15, 2012 2:52 PM masterpage:Left Suppression de lhistorique des appels . 43 Numros prslectionns . 43 Menu doptions du tlphone . 43 Transmission audio en continu . 44 coute dun priphrique Bluetooth par le biais de cet appareil. 44 Fonctionnement dun priphrique Bluetooth avec cet appareil . 44 Rglages gnraux de la fonction Bluetooth . 45 Radio Internet Pandora Transmission en continu laide de Pandora . 45 Pour connecter le priphrique mobile laide de la fonction Bluetooth . 45 Pour connecter le iPhone . 46 Apprciation positive ou ngative . 46 Liste des stations. 46 Mise en signet . 46 Cration dune station . 46 Suppression dune station . 46 Rglage du son Slection de la qualit du son EQ7. 47 Personnalisation de la courbe dgaliseur Rglages EQ7 . 47 Rglage des caractristiques du son . 47 Optimisation du son pour la position dcoute Synchronisation intelligente . 48 talonnage de la position dcoute Rglage de synchronisation intelligente . 48 Configuration du haut-parleur et rglage du volume . 49 Cration dun haut-parleur central virtuel CSO . 49 Utilisation des haut-parleurs arrire comme caissons de graves Amlioration des basses larrire . 49 Rglage du volume des haut-parleurs. 49 iPod Utilisation du iPod . 32 Affichage de la liste des plages/fichiers vido Liste. 33 Slection dune plage/dun fichier vido. 33 Slection dun type de fichier . 33 Slection du mode de lecture . 33 Lecture rpte et alatoire . 34 Fonctionnement direct dun iPod Commande dapplication passager . 34 Fonctions utiles Recherche dune plage en coutant des passages des plages ZAPPIN . 35 Contrle des applications sur votre tlphone intelligent MirrorLink . 35 Contrle des applications sur votre iPhone Application Telenav GPS . 35 Utilisation de sources diffrentes lavant et larrire Zone Zone . 36 Changement de couleur des touches Illuminateur de couleur dynamique. 36 Personnalisation de la couleur des touches Couleur personnalise . 36 Utilisation des Commandes gestuelles. 37 Appels mains-libres et audio en continu Fonction Bluetooth Avant dutiliser la fonction Bluetooth . 38 Procdure de base de la fonction Bluetooth . 38 Indications dtat Bluetooth . 38 Installation du microphone . 38 Pairage . 39 Recherche partir du priphrique Bluetooth . 39 Connexion . 39 Appel en mains libres. 40 Appels . 40 Rception dappels . 41 Fonctionnements en cours dappel . 41 Gestion du rpertoire . 42 Slection des donnes de rpertoire. 42 Navigation dans un rpertoire . 42 Suppression des donnes de rpertoire . 42 Gestion des donnes dappel . 43 4 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR+00COV-

UTOC.fm 00US+00COV-U.book Page 5 Friday, June 15, 2012 2:52 PM masterpage:Right Ajustement du moniteur Rglage de langle du moniteur. 50 Calibration de lcran tactile . 50 Rglage de limage Picture EQ . 50 Rglage personnalis de limage . 50 Slection du format de limage . 51 Rglages Configuration de base . 51 Rglages gnraux. 52 Rglages du son . 54 Rglages visuels . 56 Rglages de la source . 57 Utilisation dun quipement en option Appareil audio/vido auxiliaire . 60 Rcepteur SiriusXM Connect . 60 Camra arrire . 61 Rglages de la camra arrire . 61 Informations complmentaires Prcautions . 62 Remarques sur lcran ACL . 62 Remarques sur les disques . 62 Ordre de lecture des fichiers MP3/WMA/

AAC/Xvid/MPEG-4 . 63 propos du iPod . 65 propos de la fonction Bluetooth . 65 Entretien . 66 Retrait de lappareil . 67 Caractristiques techniques . 67 Dpannage . 68 Affichage des erreurs et messages . 72 Liste des codes de langues. 76 5 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm masterpage:Left 00US+00COV-U.book Page 6 Friday, June 15, 2012 2:52 PM Remarques sur la scurit Respectez les rgles, lois et rglements de conduite locaux. Lors de la conduite Ne regardez pas et ne faites pas fonctionner lappareil car cela peut provoquer une distraction et un accident. Stationnez votre vhicule dans un endroit sr pour regarder ou faire fonctionner lappareil. Nutilisez pas la fonction de configuration pendant que vous conduisez, ni aucune autre fonction susceptible de diminuer lattention porte la route. En reculant votre vhicule, assurez-vous de regarder attentivement vers larrire et aux alentours pour votre propre scurit, mme si la camra arrire fonctionne. Ne vous fiez pas exclusivement la camra arrire. Lors de lutilisation Ninsrez pas les mains, les doigts ou un corps tranger dans lappareil car cela peut causer des blessures ou endommager lappareil. Tenez les petits objets hors de porte des enfants. Assurez-vous dattacher les ceintures de scurit afin de prvenir les blessures lors dun mouvement brusque du vhicule. Prvention contre les accidents Les images ne saffichent que lorsque le vhicule est stationn et le frein main appliqu. Si le vhicule se met en mouvement pendant la lecture de vido, laffichage des images est dsactiv automatiquement aprs laffichage de lavertissement suivant. Vido bloque pour votre scurit. Le moniteur raccord la prise REAR OUT est actif lorsque le vhicule roule. Limage affiche est remplace par limage darrire-plan, mais la source audio est toujours en fonction. Nutilisez pas le lecteur et ne regardez pas le moniteur lorsque vous conduisez. Remarques sur linstallation Nous vous recommandons de laisser un technicien qualifi installer cet appareil. Si vous essayez de linstaller vous-mme, consultez le guide Installation/Raccordement fourni et installez lappareil correctement. Une installation incorrecte peut dcharger la batterie ou provoquer des courts-circuits. Si lappareil ne fonctionne pas correctement, vrifiez dabord les connexions en consultant le guide Installation/Raccordement fourni. Si tout est en bon tat, vrifiez le fusible. 6 Protgez la surface de lappareil contre les dommages. Nexposez pas la surface de lappareil des produits chimiques tels les insecticides, la laque, les anti-moustiques, etc. vitez le contact prolong de matriaux de caoutchouc ou de plastique avec lappareil. Sinon, le fini de lappareil peut tre abm ou il peut y avoir dformation. Lors de linstallation, assurez-vous de fixer solidement lappareil. Lors de linstallation, assurez-vous de couper le contact. Linstallation de lappareil avec le contact activ peut puiser la batterie ou provoquer un court-circuit. Lors de linstallation, assurez-vous de nendommager aucune pice du vhicule, comme les conduites, les tuyaux, le rservoir dessence ou les cbles en utilisant une perceuse; il y a risque dincendie ou daccident. Droits dauteur Fabriqu sous licence de Dolby Laboratories. Dolby et le symbole double-D sont des marques dposes de Dolby Laboratories. Microsoft, Windows, Windows Vista et Windows Media et leurs logos sont des marques de commerce ou des marques dposes de Microsoft Corporation aux tats-Unis et dans dautres pays. Ce produit incorpore une technologie sujette certains droits de proprit intellectuelle de Microsoft. Lutilisation ou la distribution de cette technologie hors de ce produit est interdite sans licence(s) approprie(s) de Microsoft. DVD VIDEO , DVD-R , DVD-RW , DVD+R et DVD+RW sont des marques de commerce. Le logotype et les logos Bluetooth sont la proprit de Bluetooth SIG, Inc. et toute utilisation de ces marques est accorde sous licence Sony Corporation. Les autres marques et noms de commerce appartiennent leurs propritaires respectifs. ZAPPIN est une marque de commerce de Sony Corporation. 12 TONE ANALYSIS et son logo sont des marques de commerce de Sony Corporation. WALKMAN et le logo WALKMAN sont des marques de commerce dposes de Sony Corporation. XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 7 Friday, June 15, 2012 2:52 PM SensMe et le logo SensMe sont des marques de commerce ou des marques de commerce dposes de Sony Ericsson Mobile Communications AB. RELATIVES AUX LICENCES ET USAGES PROMOTIONNELS, INTERNES ET COMMERCIAUX, PEUVENT TRE OBTENUES AUPRS DE MPEG LA, LLC. CONSULTEZ LE SITE HTTP://WWW.MPEGLA.COM Pandora, le logo Pandora et la prsentation Pandora sont des marques commerciales ou des marques dposes de Pandora Media, Inc., utilises avec permission. Android est une marque commerciale de Google Inc. Lutilisation de cette marque commerciale est soumise aux dispositions Google Permissions. BlackBerry est la proprit de Research In Motion Limited et une marque dpose et/ou utilise aux tats-Unis et dans dautres pays. Utilise sous licence de Research In Motion Limited. Les abonnements SiriusXM et le rcepteur Connect sont vendus sparment. www.siriusxm.com. Sirius, XM et la totalit des marques et logos associs sont des marques commerciales de Sirius XM Radio Inc. et de ses filiales. Toutes les autres marques et tous les autres logos appartiennent leurs dtenteurs respectifs. Tous droits rservs. HD Radio Technology est fabriqu sous licence par iBiquity Digital Corporation. Brevets U.S. et trangers. HD Radio et HD, HD Radio et Arc logos sont des marques dposes par iBiquity Digital Corp. TelenavMD et le logo Telenav sont des marques dposes ou des marques de commerce de Telenav, Inc. Toutes les autres marques commerciales sont des marques appartenant leurs dtenteurs respectifs. Ce produit utilise un pilote logiciel NCM qui est concd sous licence Sony par la corporation MCCI. Technologie de reconnaissance musicale et donnes connexes fournies par Gracenote. Gracenote constitue la norme de lindustrie en matire de technologie de reconnaissance musicale et de fourniture de contenus connexes. Pour plus de dtails, visitez www.gracenote.com. Les donnes sur CD, DVD ou/et Blu-ray et les donnes associes aux morceaux de musique et aux clips vido sont fournies par Gracenote, Inc., copyright 2000-Date actuelle Gracenote. Gracenote Software, copyright 2000-Date actuelle Gracenote. Ce produit et ce service sont protgs par un ou plusieurs brevets appartenant Gracenote. Visitez le site Web de Gracenote pour consulter une liste non exhaustive des brevets Gracenote applicables. Gracenote, CDDB, MusicID, MediaVOCS, le logo et le graphisme Gracenote ainsi que la mention Powered by Gracenote sont des marques ou des marques dposes de Gracenote aux Etats-Unis et/ou dans dautres pays. iPhone, iPod, iPod classic, iPod nano et iPod touch sont des marques de commerce de Apple Inc., dposes aux tats-Unis et dans dautres pays. Apple, Macintosh et iTunes sont des marques de commerce de Apple Inc., dposes aux tats-Unis et dans dautres pays. MirrorLink et le logo MirrorLink sont des marques de certification de Car Connectivity Consortium LLC. Lutilisation non autorise est strictement interdite. CE PRODUIT EST SOUS LICENCE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE POUR TOUT USAGE STRICTEMENT PERSONNEL ET NON COMMERCIAL PAR UN CONSOMMATEUR POUR LE DCODAGE DE VIDO MPEG-4 PRALABLEMENT ENCODE PAR UN CONSOMMATEUR ENGAG DANS UNE ACTIVIT PERSONNELLE ET NON COMMERCIALE ET/OU OBTENUE DUN FOURNISSEUR DE VIDOS HABILIT PAR MPEG FOURNIR DE LA VIDO MPEG-4. AUCUNE LICENCE EXPRESSE OU TACITE NEST ACCORDE POUR AUCUN AUTRE USAGE. DES INFORMATIONS COMPLMENTAIRES, NOTAMMENT 7 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm masterpage:Left 00US+00COV-U.book Page 8 Friday, June 15, 2012 2:52 PM Remarques sur la fonction Bluetooth Attention EN AUCUN CAS SONY EST RESPONSABLE POUR TOUT DOMMAGES ACCESSOIRES, INDIRECT OU POUR TOUS AUTRES DOMMAGES, Y COMPRIS, SANS SY LIMITER, LES DOMMAGES RSULTANTS DUNE PERTE DE PROFITS, DE REVENUS, DE DONNES, DUNE PERTE DUTILISATION DU PRODUIT OU DE LQUIPEMENT CONNEXE, DES ARRTS DE TRAVAIL ET DES PERTES DE TEMPS DE LACHETEUR RSULTANTS DE LUTILISATION DE CE PRODUIT, DU MATRIEL ET/OU DU LOGICIEL. AVIS IMPORTANT!

Utilisation efficace et en scurit Les changements ou modifications apports cet appareil et qui ne sont pas expressment autoriss par Sony peuvent annuler lautorisation accorde lutilisateur de faire fonctionner lappareil. Veuillez vrifier les exceptions en vigueur de lquipement Bluetooth en raison dexigences ou de limitations nationales avant dutiliser ce produit. Conduite Vrifiez la lgislation et la rglementation en vigueur concernant lutilisation des tlphones cellulaires et des appareils mains libres dans les endroits o vous circulez. Soyez toujours trs attentif au volant et garez-vous avant deffectuer ou de rpondre un appel si les conditions de circulation lexigent. Connexion dautres priphriques Avant de connecter un autre priphrique, lisez attentivement son mode demploi pour plus de dtails concernant les instructions de scurit. Exposition aux frquences radio Les signaux RF peuvent influer ngativement sur les systmes lectroniques mal installs ou mal isols dans les vhicules. Ces systmes lectroniques comprennent linjection du carburant, le freinage antipatinage (antiblocage), le rgulateur de vitesse ou les coussins gonflables. Consultez le fabricant ou son reprsentant quant linstallation ou lentretien de cet appareil. Une mauvaise installation ou un entretien mal effectu peut tre dangereux et invalider toute garantie qui sapplique cet appareil. Vrifiez auprs du constructeur de votre vhicule que lutilisation de votre tlphone cellulaire ne risque pas daffecter les systmes lectroniques embarqus. Vrifiez rgulirement que tous les appareils priphriques sans fil installs dans votre vhicule sont bien monts et fonctionnent correctement. 8 Appels durgence Cet appareil mains-libres Bluetooth de vhicule et le priphrique lectronique auquel il est raccord fonctionnent laide de signaux radio, des rseaux cellulaires et par lignes terrestres, ainsi qu laide de fonctions programmables par lutilisateur qui ne peuvent garantir la connexion dans toutes les conditions. Par consquent, ne vous fiez pas uniquement des priphriques lectroniques pour vos communications importantes (telles les urgences mdicales). Rappelez-vous que pour faire ou recevoir des appels, le priphrique mains libres et le priphrique lectronique connect celui-ci doivent tre activs dans une zone de service dans laquelle la puissance des signaux cellulaires est adapte. Les appels durgence peuvent ne pas tre possibles sur tous les tlphones cellulaires ou lorsque certains services de rseau ou certaines fonctions du tlphone sont utiliss. Consultez votre fournisseur de service local pour plus de renseignements. Avis au sujet de la licence Ce produit contient un logiciel que Sony utilise en vertu dun accord de licence avec le dtenteur de son droit dauteur. Nous avons lobligation de communiquer le contenu de cet accord aux consommateurs pour nous conformer aux exigences du dtenteur de droit dauteur du logiciel. Pour plus de dtails sur les licences de logiciel, consultez la page 53. Avis au sujet de la LPG/LPGL GNU applicable au logiciel Ce produit contient un logiciel soumis la Licence Publique Gnrale GNU (ci-aprs nomme LPG ) ou la Licence Publique Gnrale Limite GNU (ci-aprs nomme LPGL ). Ces licences indiquent que les consommateurs ont le droit dacqurir, de modifier et de redistribuer le code source dudit logiciel en se conformant aux modalits de la LPG ou LPGL affiche sur cet appareil. Le code source pour le logiciel mentionn ci-

dessus est disponible sur le Web. Pour le tlcharger, veuillez accder ladresse URL suivante, puis slectionnez le nom de modle XAV-701HD . URL : http://www.sony.net/Products/Linux/

Veuillez noter que Sony nest pas en mesure de rpondre aux questions concernant le contenu du code source. XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 9 Friday, June 15, 2012 2:52 PM Disques et types de fichier pouvant tre lus Cet appareil peut lire diffrents disques vido/audio. Le tableau suivant vous permet de vrifier si un disque est pris en charge par cet appareil, ainsi que les fonctions disponibles pour un type de disque donn. Symbole du disque dans le manuel O E D V I I O D U A Format du disque DVD VIDEO DVD-R*1/DVD-R DL*1/DVD-RW*1

(Mode vido/mode VR) DVD+R*1/DVD+R DL*1/DVD+RW*1 CD vido

(Ver. 1.0/1.1/2.0) CD audio CD-ROM*2/CD-R*2/CD-RW*2

*1 Les fichiers audio peuvent galement tre enregistrs.

*2 Les fichiers vido peuvent galement tre enregistrs. Remarque DVD peut tre utilis comme terme gnrique dans ce Mode demploi pour dcrire les DVD VIDEO, DVD-R/

DVD-RW et DVD+R/DVD+RW. Le tableau suivant illustre les types de fichiers pris en charge ainsi que leurs symboles. Les fonctions disponibles dpendent du format, sans gard au type de disque. Les symboles de formats ci-dessous apparaissent dans ce Mode demploi la suite de la description des fonctions disponibles pour les types de fichiers correspondants. Symbole du format dans le manuel MPEG-4 Type de fichier Fichier audio MP3 Fichier audio WMA Fichier audio AAC Fichier audio WAVE Fichier vido Xvid Fichier vido WMV Fichier vido MPEG-4 Fichier vido AVC (ligne de base H.264) Conseil Pour plus de dtails sur les formats de compression, reportez-vous la page 63. Remarque Mme les disques compatibles peuvent ne pas tre lus sur cet appareil; cela dpend de ltat de lenregistrement. 9 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm masterpage:Left 00US+00COV-U.book Page 10 Friday, June 15, 2012 2:52 PM Emplacement et fonction des commandes Appareil principal Pour plus de dtails, consultez les pages mentionnes ci-dessous. A Fente dinsertion des disques page 19

(situe derrire la faade) B Touches VOL (Volume) /+*1 C Touche DSPL/M.OFF Appuyez sur la touche pour changer les lments daffichage. Maintenez la touche enfonce pour teindre le moniteur et lillumination de la touche. Pour les ractiver, touchez lcran en un point quelconque. D Touche de rinitialisation page 14 E cran daffichage/tactile F Rcepteur pour la tlcommande G Touche HOME/ATT 10 5 Appuyez sur la touche pour ouvrir le menu HOME. Maintenez la touche enfonce pour attnuer le son. H Touche SOURCE/OFF Appuyez sur la touche pour mettre en marche/modifier la source : Radio (HD Radio), Telenav , Pandora , MirrorLink , SXM*2 , iPod , USB Musique , USB Video , Disque , Audio BT (Audio Bluetooth), AUX (quipement auxiliaire). Maintenez la touche enfonce pendant 1 seconde pour quitter la source. Maintenez la touche enfonce pendant plus de 2 secondes pour mettre lappareil hors tension. I Touche Z (jecter) TILT page 19, 50 Maintenez la touche enfonce pour rgler langle du moniteur.

*1 Un point tactile est situ droite de la touche VOL +.

*2 Si un syntoniseur SAT est connect, le priphrique raccord ( SXM ) sactive lcran. XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 11 Friday, June 15, 2012 2:52 PM Affichage lcran Liste dindications :

cran daccueil :

A ATT (Attnuer) B ZONE ZONE C TAG D Indications dtat Bluetooth page 38 E Horloge page 14 F Touche ZONE ZONE Touchez pour activer la fonction Zone Zone. G Touche Option Touchez pour ouvrir le menu Option HOME. Les lments du menu doptions daccueil sont les suivants :

Classement des icnes Affiche les icnes en fonction de la frquence dutilisation : Par dfaut , Frquences utilises . Thme de fond dcran *1 Change le thme de fond dcran : Par dfaut , Utilisateur . Affichage Icne Change laffichage des icnes : Mode 2D , Mode 3D*2 . Effet tactile Affiche une trane lumineuse lendroit o vous touchez laffichage : ACTIV , DSACTIV . Pour retourner lcran daccueil, touchez

. H Touches de slection de source Touchez pour modifier la source :

Radio (HD Radio), Telenav , Pandora , MirrorLink , SXM*3 , Tlphone , iPod , USB Musique , USB Video , Photo USB , Disque , Audio BT , Navigation*4 , Cam. recul , AUX (quipement auxiliaire), Rglages .

*1 Disponible aprs le rglage dun fichier de photo comme arrire-plan pendant que la source Photo USB est slectionne.

*2 Slectionnez le Mode 2D/3D pour afficher les icnes en 2D/3D. En Mode 3D, vous pouvez utiliser laffichage en dplaant les icnes dans les deux sens.

*3 Si un syntoniseur SAT est connect, le priphrique raccord ( SXM ) sactive lcran. 11 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm masterpage:Left 00US+00COV-U.book Page 12 Friday, June 15, 2012 2:52 PM

*4 Si le module de navigation (non fourni) est connect, licne de source Navigation sactive sur lcran daccueil. Conseil Touchez et maintenez votre doigt nimporte quel endroit sur lcran pour afficher la liste des lments de menu. C Touche MONITOR OFF Appuyez sur la touche pour mettre le moniteur hors tension et teindre lillumination de la touche. Pour remettre sous tension, appuyez de nouveau sur la touche. Tlcommande RM-X271 Vous pouvez utiliser la tlcommande pour faire fonctionner les commandes audio. Utilisez lcran tactile pour les oprations du menu. Pour plus de dtails, consultez les pages mentionnes ci-dessous. Enlevez la pellicule isolante avant lutilisation

(page 14). A Touche OFF Appuyez sur la touche pour quitter ou arrter la source. Maintenez la touche enfonce pour mettre hors tension. B Touche DSPL Appuyez sur la touche pour changer les lments daffichage. 12 D Touche POSITION Appuyez sur la touche pour modifier la position dcoute ( Avant G / Avant D /

Avant / Tous / Personnalis /

DSACTIV ). E Touche O (Retour) Appuyez sur la touche pour revenir lcran prcdent/revenir au menu prcdent sur un VCD*1. F Touche EQ (galiseur) Appuyez sur la touche pour choisir une courbe dgaliseur en fonction de 7 types de musique ( Xplod / Vocal / Extrme /

Balade / Ar / Basses profondes /

Personnalis / DSACTIV ). G Touches numriques page 23 Radio :

Appuyez sur ces touches pour syntoniser des stations mmorises. Maintenez enfonce cette touche pour mmoriser des stations. Disque :

Appuyez sur la touche pour chercher un titre/

chapitre/plage. H Touche CLEAR Appuyez sur la touche pour supprimer un numro saisi. I Touche ZZ (Zone Zone) page 36 Appuyez sur la touche pour activer la fonction Zone Zone. J Touche ATT (Attnuer) Appuyez sur la touche pour attnuer le son. Pour annuler, appuyez de nouveau sur la touche. K Touche u (Lecture/Pause) L Touches .m/M>

Radio/SXM :

Appuyez sur les touches pour syntoniser automatiquement les stations radio. Appuyez sur cette touche et maintenez-la enfonce pour trouver une station manuellement. XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 13 Friday, June 15, 2012 2:52 PM P Touche SRC (Source) Appuyez sur la touche pour activer/modifier la source : Radio (HD Radio), Telenav , Pandora , MirrorLink , SXM , iPod , USB Musique , USB Video , Disque , Audio BT

(Audio Bluetooth), AUX (quipement auxiliaire). Q Touche MODE Appuyez sur la touche pour slectionner la bande radio (FM/AM)/slectionner un priphrique auxiliaire (AUX1/AUX2)*4. R Touches de VOL (Volume) +/

*1 Lors de lactivation des fonctions PBC.

*2 Selon le disque, le fonctionnement est diffrent

(page 20).

*3 Les fonctionnements sont diffrents selon le priphrique Bluetooth raccord.

*4 Lorsque deux priphriques auxiliaires sont utiliss. Remarque La tlcommande ne fonctionne pas lorsque lappareil est hors tension et que laffichage est teint. Appuyez sur la touche (SOURCE/OFF) de lappareil principal ou insrez un disque pour activer lappareil et permettre son fonctionnement laide de la tlcommande. Appuyez sur la touche pour rechercher automatiquement les contenus enregistrs

(SXM). Disque*2/USB/iPod :

Appuyez sur cette touche pour sauter un chapitre/une plage/une scne/un fichier. Appuyez sur la touche et maintenez-la enfonce momentanment pour faire reculer/

avancer rapidement la vido. Maintenez la touche enfonce pour faire reculer/avancer rapidement une plage. Audio Bluetooth*3 :

Appuyez sur cette touche pour sauter une plage. Maintenez la touche enfonce pour faire reculer/avancer rapidement une plage. Pandora:

Appuyez sur cette touche pour sauter une plage. M Touches de rglage de la lecture des DVD

(AUDIO):

Appuyez sur la touche pour modifier la langue/le format audio.

(Pour changer le canal audio dans le cas dun VCD.)

(SUBTITLE):

Appuyez sur la touche pour modifier la langue des sous-titres.

(ANGLE):

Appuyez sur la touche pour modifier langle de vue.

(TOP MENU):

Appuyez sur la touche pour ouvrir le menu principal sur un DVD.

(MENU):

Appuyez sur la touche pour ouvrir le menu sur un disque. N Touche ZAP Appuyez sur la touche pour aller en mode ZAPPIN. O Touches </M/m/, (Curseur)/ENTER page 19, 19 Radio/SXM:

Appuyez sur la touche pour syntoniser des stations automatiquement. Appuyez sur la touche et maintenez-la enfonce pour rechercher une station manuellement. Disque(DVD):

Appuyez sur la touche pour commander le menu sur un DVD. 13 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm masterpage:Left 00US+00COV-U.book Page 14 Friday, June 15, 2012 2:52 PM Prparation Rinitialisation de lappareil Avant la premire mise en service de lappareil ou aprs avoir remplac la batterie du vhicule ou modifi les raccordements, vous devez rinitialiser lappareil. Appuyez sur la touche de rinitialisation

(page 10) laide dun objet pointu comme un stylo bille. Remarque Une pression sur la touche de rinitialisation efface le rglage de lheure et certaines informations mmorises. Rglage initial Aprs la rinitialisation de lappareil, lcran de rglage initial saffiche. 1 Touchez No sur lcran de rglage de la dmonstration. 2 Touchez Caisson de basses pour rgler le statut de connexion du caisson de graves. Rglez ACTIV si un caisson de graves est connect ou DSACTIV si aucun caisson de graves nest connect. 3 Touchez Position dcoute pour rgler la position dcoute. Rglez Avant G si votre position dcoute est dans la partie avant gauche ou rglez Avant D si elle est dans la partie avant droite. Pour retourner lcran Configuration initiale, touchez

. 4 Touchez Langue pour rgler la langue daffichage. Dplacez la barre de dfilement vers le haut et le bas, puis slectionnez la langue souhaite

(English/Franais/Espaol/Portugus/

/Nederlands/Deutsch/Italiano). Pour retourner lcran Configuration initiale, touchez

. 5 Touchez OK . La configuration est termine. 14 Vous pouvez ensuite configurer ce rglage plus en dtail dans le menu de rglage. Pour plus de dtails sur le rglage du statut de connexion du caisson de graves, reportez-vous la page 55. Pour plus de dtails sur le rglage de la position dcoute, voir Optimisation du son pour la position dcoute Synchronisation intelligente la page 48. Pour plus de dtails sur le rglage de lencodage des caractres, reportez-vous la page 52. Pour plus de dtails sur le rglage de la langue daffichage, reportez-vous la page 52. Remarque Certains caractres peuvent ne pas safficher correctement, selon la langue/le pays/la rgion. Rglage de lhorloge Lhorloge fonctionne suivant un cycle de 12 heures. 1 Appuyez sur (HOME), puis touchez Rglages . 2 Touchez

, puis touchez Rglage horloge . Lcran de rglage saffiche. 3 Rglez lheure et les minutes. Par exemple, pour rgler lhorloge 8 h 30, touchez 0830 . 4 Touchez AM ou PM . 5 Touchez OK . La configuration est termine. Pour activer/dsactiver la fonction CT, touchez CT ltape 3. (page 52) Pour supprimer un numro entr, touchez Effacer . Pour revenir lcran prcdent, touchez Remarques La fonction CT peut tre inoprante, mme si vous

. recevez une station RDS. Il peut y avoir une diffrence dheure entre lheure rgle par la fonction CT et lheure relle. Prparation de la tlcommande Enlevez la pellicule isolante avant dutiliser la tlcommande pour la premire fois. XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 15 Friday, June 15, 2012 2:52 PM Radio Donnes de service dmission : Contribuent lexprience suprieure offerte par la technologie HD Radio Technology. Prsente le nom de chanson, lartiste, les identifiants de station, le guide de canal HD2/

HD3 et dautres donnes pertinentes. Canaux FM locaux supplmentaires adjacents aux principales stations conventionnelles. Ces canaux HD2/HD3 Channels proposent de nouvelles musiques originales, ainsi que des innovations dans les genres conventionnels. Son numrique de qualit CD. La technologie HD Radio Technology permet aux stations radio locales de diffuser un signal numrique cristallin. Le son des stations AM est comparable celui des stations FM actuelles, et celui des stations FM, celui des CD. Ltiquetage iTunes Tagging vous donne la possibilit de dcouvrir une multitude de contenus et permet d tiqueter ces derniers pour les passer en revue et les acheter ultrieurement partir de la boutique iTunes Store. Informations visuelles relies au contenu en cours de lecture sur votre rcepteur HD Radio, telles que la pochette dalbum, les photographies historiques, les images fixes transmises en direct, parmi dautres contenus relis. Pour plus dinformations, visitez le site Web suivant :

http://www.hdradio.com/

coute de la radio 1 Appuyez sur (HOME), puis touchez Radio . Lcran de rception radio saffiche. 2 Touchez la bande actuelle. La liste des bandes saffiche. 3 Touchez la bande souhaite

( FM1 , FM2 , FM3 , AM1 ou AM2 ). 4 Rglez la frquence.

/

Pour rgler automatiquement la frquence Touchez Le balayage cesse lorsque lappareil reoit une station. Rptez cette procdure jusqu ce que vous receviez la station voulue. Pour le fonctionnement pendant la rception HD Radio, reportez-vous la section propos de la multidiffusion FM (page 17). Pour rgler manuellement la frquence Touchez la frquence voulue soit syntonise. Pour sauter les frquences de manire continue, touchez ncessaire. plusieurs fois, jusqu ce que aussi longtemps que

/

/

Commandes de rception Affichage de lopration de lecture :

1 2 3 4 5 6 7 8 9 8 7 Affichage de lecture (rception HD Radio uniquement) :

0 qa 4 6 15 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm masterpage:Left 00US+00COV-U.book Page 16 Friday, June 15, 2012 2:52 PM 1 Icne de bande actuelle Touchez pour ouvrir la liste des bandes. Indications pendant la rception Affichage de lopration de lecture :

2 3 4 5 6 7 8

(Liste)*

Touchez pour afficher la liste permettant de slectionner lmission principale/

complmentaire (uniquement pendant la rception dune diffusion numrique)

(page 17). Touchez pour enregistrer llment prslectionn. Touchez pour changer le systme de visualisation, qui contient les lments suivants :

Portail/Ballon/Brillant/Animal/Graffiti/

Encre/Alatoire/DSACTIV

(Affichage de lecture)*

Touchez pour afficher laffichage de lecture HD Radio.

(Option) Touchez pour supprimer toutes les tiquettes iTunes enregistres (page 18).

/

Touchez pour syntoniser automatiquement. Pour le fonctionnement pendant la rception HD Radio, reportez-vous la section propos de la multidiffusion FM (page 17).

/

Touchez pour syntoniser manuellement. Pour sauter les frquences de manire continue, touchez aussi longtemps que ncessaire. 9 1 6 Touchez pour slectionner des stations. Touchez et maintenez votre doigt pour mmoriser la frquence actuellement affiche dans une prslection. 0 qa

(Arrire) Touchez pour afficher laffichage dopration de lecture HD Radio. TAG Touchez pour enregistrer ltiquette avec la plage en cours de lecture (page 17).

* La slection est impossible pendant la rception radio analogique. 16 A B C D E F Affichage de lecture (rception HD Radio uniquement) :

A E C DD G H A Icne de source courante*

B Nom de bande C Frquence/tat D Nom de station/Type dmission E Logo de station F Numro prrgl G Pochette dalbum*

H Nom de plage, nom de lartiste, nom dalbum, genre*

* Ne saffiche pas pendant la rception radio analogique. Mmorisation et rception des stations Attention Pour syntoniser des stations pendant la conduite, utilisez la mmorisation des meilleures syntonisations (BTM) afin dviter les accidents. Mmorisation automatique BTM 1 Appuyez sur (HOME), puis touchez Radio . XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 17 Friday, June 15, 2012 2:52 PM Slectionnez la bande souhaite ( FM1 , FM2 , FM3 , AM1 ou AM2 ). 2 Touchez

. Lcran BTM saffiche. 3 Touchez BTM . Lappareil mmorise les six premires stations dans la liste des stations prslectionnes ( 1 6 ). Pour retourner lcran de lecture, touchez

. Mmorisation manuelle 1 Lorsque vous captez la station que vous souhaitez mmoriser, touchez

, puis touchez un numro dans la liste ( 1 6 ). Pour retourner lcran de lecture, touchez Remarque Si vous essayez de mmoriser une autre station au mme numro, la station mmorise prcdemment est efface. Rception des stations mmorises 1 Slectionnez la bande. 2 Touchez au numro souhait ( 1 6 ). propos de la multidiffusion FM Certaines stations FM HD Radio proposent une mission principale et une ou plusieurs mission(s) complmentaire(s) (jusqu 7) sur la mme frquence. saffiche pendant la rception dune station avec une mission complmentaire. Slection dune mission partir de la liste 1 Pendant la rception de lmission principale, touchez

. 2 Touchez lmission souhaite. Recherche automatique dune mission 1 Pendant la rception de lmission principale, touchez

/

. iTunes Tagging La touche iTunes Tag de cet appareil vous permet dtiqueter les chansons de votre choix qui sont diffuses par les stations HD Radio. Les informations relatives ces chansons tiquetes sont enregistres par le rcepteur et transfres vers votre iPod. Lorsque vous raccordez votre iPod votre ordinateur, iTunes prsente automatiquement les chansons dans une nouvelle liste de lecture tiquete pour vous permettre de les passer en revue, les acheter et les tlcharger. Ltiquetage iTunes Tagging reprsente un excellent moyen de dcouvrir de nouvelles pices musicales et dajouter celles-ci votre collection!

Utilisation de ltiquetage iTunes Tagging Vous pouvez enregistrer le nom dune chanson diffuse par une station HD Radio sur cet appareil en suivant quelques tapes trs simples. Aprs avoir transfr linformation de chanson au iPod raccord laide de cet appareil, synchronisez votre iPod avec votre ordinateur. Ces chansons safficheront dans la liste de lecture tiquete diTunes, qui vous permet de facilement passer en revue ou acheter des chansons. Pour plus de dtails sur ltiquetage iTunes Tagging et les plus rcents modles compatibles avec ltiquetage iTunes Tagging, consultez le site Web iTunes ladresse :

http://www.apple.com/itunes/

Pour plus de dtails sur lachat dune chanson laide de linformation tiquete , consultez le site Web iTunes ladresse :

http://www.apple.com/support/itunes/

Collecte dinformation de chanson TAG saffiche lorsque des informations de chanson sont diffuses par une station HD Radio. 1 Appuyez sur TAG . 17 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm masterpage:Left 00US+00COV-U.book Page 18 Friday, June 15, 2012 2:52 PM Lappareil commence la collecte dinformation de chanson. Aprs la collecte dinformation de chanson, lappareil commence lenregistrement des donnes, puis un message indique que lenregistrement dtiquette est termin. Remarques Si linformation de chanson nest pas incluse dans la diffusion de la station HD Radio, un message derreur saffiche. La collecte dinformation de chanson prend jusqu 10 secondes. Si vous touchez TAG immdiatement aprs le dbut dune chanson, il est possible que lappareil rcupre linformation de la chanson diffuse prcdemment en plus de la chanson actuelle. Si vous touchez TAG juste avant la fin dune chanson, il est possible que lappareil rcupre linformation de la chanson suivante en plus de la chanson actuelle. Le nombre maximum de chansons tiquetes pouvant tre enregistres dans cet appareil est 50. Si vous touchez TAG pendant que 50 chansons tiquetes sont dj enregistres, un message derreur saffiche et linformation de chanson nest pas rcupre. Remarques Ne retirez pas le iPod pendant le transfert. Lappareil ne peut pas transfrer linformation de chanson si le iPod est retir. Si le iPod raccord ne prend pas en charge ltiquetage iTunes Tagging, linformation de chanson ne sera pas transfre, mme aprs lenregistrement des donnes par cet appareil, et le message derreur saffiche. Si le iPod raccord ne dispose pas de suffisamment despace mmoire, linformation de chanson ne sera pas transfre, mme aprs lenregistrement des donnes par cet appareil, et le message derreur saffiche. Suppression de linformation de chanson tiquete Vous pouvez supprimer toutes les informations de chanson tiquete avant le transfert vers votre iPod. 1 Appuyez sur (HOME), puis touchez Radio . 2 Touchez

. Laffichage de confirmation pour la suppression dtiquette apparat. 3 Touchez Supprimer . Pour annuler la suppression, touchez Annuler . Remarque Une fois supprime, linformation de chanson ne peut pas tre rcupre. Transfert de linformation de chanson rcupre Vous pouvez transfrer linformation de chanson rcupre et enregistre vers un iPod laide de cet appareil. Pour plus de dtails sur les modles iPod compatibles, reportez-vous la section propos du iPod la page 65. 1 Placez votre iPod sur le connecteur de lappareil. Lappareil commence automatiquement transfrer linformation de chanson enregistre. Un message saffiche pendant le transfert. Si un iPod est insr dans lappareil pendant la rcupration de chanson tiquete, lappareil commence immdiatement transfrer les donnes vers le iPod, aprs lenregistrement des donnes. Aprs le transfert de linformation de chanson tiquete de lappareil vers le iPod, les donnes enregistres sont supprimes de lappareil. 18 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 19 Friday, June 15, 2012 2:52 PM Disques Lecture de disques Suivant les disques, certaines oprations peuvent varier ou tre limites. Reportez-vous au mode demploi fourni avec votre disque. 1 Appuyez sur la touche Z sur lappareil principal. La faade souvre automatiquement. 2 Insrez le disque (ct imprim vers le haut). La faade se ferme automatiquement, puis la lecture dmarre. Si le menu de DVD saffiche Touchez loption sur le menu du DVD. Vous pouvez aussi utiliser lcran de commande de menu qui peut safficher en touchant lextrieur du menu de DVD. Touchez B/V/v/b pour dplacer le curseur, puis touchez ENTR. pour confirmer. Si lcran de contrle de menu ne saffiche pas lorsque vous touchez lcran, utilisez la tlcommande. propos du menu DVD Un DVD est divis en plusieurs sections qui composent un film ou une pice musicale. Ces sections sont dsignes comme titres . Lorsque vous lisez un DVD qui comporte plusieurs titres, vous pouvez choisir le titre voulu laide du menu principal du DVD. Dans le cas des DVD qui vous permettent de slectionner des options comme un ou plusieurs sous-

titres/langues, slectionnez ces options laide du menu DVD. Pour interrompre la lecture Maintenez enfonce la touche (SOURCE/OFF) pendant 1 seconde. Remarque Les disques en format DTS ne sont pas pris en charge. Le son nest pas reproduit lorsque le format DTS est choisi. Pour jecter le disque 1 Appuyez sur la touche Z sur lappareil principal. La faade souvre automatiquement, puis le disque est ject. 2 Appuyez sur la touche Z sur lappareil principal pour fermer la faade. Commandes de lecture Touchez lcran si les commandes de lecture ne saffichent pas. 1 2 3 4 5 4 6 3 7 4 5 4 8 3 4 5 4 MPEG-4 1 3 Remarque La faade se ferme automatiquement aprs lalarme davertissement. 4 5 4 19 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm masterpage:Left 00US+00COV-U.book Page 20 Friday, June 15, 2012 2:52 PM 1 2 Touchez pour afficher la liste des plages/

fichiers vido. (page 23) Touchez pour changer le systme de visualisation, qui contient les lments suivants :

Portail/Ballon/Brillant/Animal/Graffiti/

Encre/Alatoire/DSACTIV 3 Rpter

/ Alatoire

(page 22) 4 ./>

Touchez pour sauter un chapitre/une plage/une scne. Appuyez sur la touche et maintenez-la enfonce momentanment pour faire reculer/avancer rapidement la vido, puis touchez plusieurs fois pour modifier la vitesse ( 2 t 12 t 120 t 2 )*1. Pour annuler, touchez u. Appuyez sur la touche et maintenez-la enfonce pour reculer/avancer rapidement dans une plage audio. Au cours de la pause, touchez et maintenez enfonce la touche > pour lire la vido au ralenti. Pour annuler, librez la touche. 5 u Touchez pour effectuer une pause/

reprendre la lecture aprs une pause. 6 Touchez pour ouvrir le menu des commandes DVD qui contient les lments suivants. Menu sup. : Touchez cette option pour ouvrir le menu principal du DVD.*2 Menu : Touchez cette option pour ouvrir le menu du disque.*2

: Touchez plusieurs fois cette option pour slectionner le format/la langue audio. (page 21)*2

: Touchez plusieurs fois cette option pour dsactiver/slectionner la langue des sous-titres.*2*3

: Touchez plusieurs fois cette option pour modifier langle de vue.*2 20

(lecture de DVD VIDEO uniquement) Touchez pour ouvrir le menu doption. CSO (Rglages du haut-parleur central)

(page 49) Volume Audio DVD (page 22) 7 8 Touchez pour changer le canal audio.

(page 22)

*1 La vitesse dpend du format ou de la mthode denregistrement utilise.

*2 La disponibilit dpend du disque.

*3 Lorsquun message vous invitant entrer un code 4 chiffres saffiche, entrez le code de la langue

(page 76) souhaite. Remarque Si le disque contient plusieurs types de fichiers, seul le type de fichier slectionn (audio/vido) peut tre lu. Pour des dtails sur la manire de slectionner le type de fichier, voir Slection dun type de fichier la page 23. Indications de lecture Touchez lcran si les indications ne saffichent pas. Dans le cas de disques audio, certaines indications sont toujours affiches au cours de la lecture. A B C MPEG-4 D XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 21 Friday, June 15, 2012 2:52 PM C D A Icne de source courante, format, numro de chapitre/titre*1, format audio*3 B tat de la lecture, temps de lecture coul C Nom de plage/dartiste/dalbum*1*5 Nom de fichier/dossier*6 D Icne de source courante, format, numro de plage (fichier)*2, tat de la lecture, temps de lecture coul*4

*1 Selon le contenu, les indications sont diffrentes.

*2 Lors de la lecture dun VCD avec fonctions PBC

(page 21), PBC saffiche.

*3 DVD uniquement.

*4 Aucune indication ne saffiche lors de la lecture dun VCD avec fonctions PBC.

*5 CD/MP3/WMA/AAC uniquement.

*6 Xvid/MPEG-4 uniquement. Utilisation des fonctions PBC

(contrle de la lecture) Le menu PBC aide interactivement aux oprations pendant la lecture dun VCD compatible avec PBC. 1 Commencez la lecture dun VCD compatible avec PBC. Le menu PBC saffiche. 2 Appuyez sur les touches numriques de la tlcommande pour slectionner llment souhait, puis appuyez sur

(ENTER). 3 Suivez les instructions du menu concernant les oprations interactives. Pour revenir lcran prcdent, appuyez sur la touche O de la tlcommande. Lecture sans les fonctions PBC 1 Appuyez sur (HOME), puis touchez Rglages . 2 Touchez

. Le menu de rglage de la source saffiche. 3 Dplacez la barre de dfilement vers le haut et le bas, puis touchez PBC Vido CD pour slectionner DSACTIV . 4 Dmarrez la lecture dun VCD. Le menu PBC ne saffiche pas en cours de lecture. Remarques Les paramtres du menu et les procdures dutilisation varient suivant le disque. Au cours de la lecture PBC, le numro de plage, llment de lecture, etc., ne saffiche pas lcran de lecture. La reprise de lecture nest pas disponible au cours de la lecture avec PBC. Configuration des paramtres audio Remarque Les disques en format DTS ne sont pas pris en charge. Le son nest pas reproduit lorsque le format DTS est choisi. Modification de la langue/du format du son La langue de laudio peut tre modifie si le disque est enregistr avec des plages de plusieurs langues. Vous pouvez modifier le format audio lorsque vous faites jouer un disque enregistr en plusieurs formats audio (par ex. : Dolby Digital). 1 Pendant la lecture, touchez lcran. 2 Touchez

. Le menu de langue audio saffiche. 3 Touchez plusieurs fois jusqu ce que la langue/le format audio souhait apparaisse. Langue du son Format audio/numros de canaux*

La langue du son change selon les langues disponibles. Lorsquun message vous invitant entrer un code 4 chiffres saffiche, entrez le code de la langue (page 76) souhaite. 21 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm masterpage:Left 00US+00COV-U.book Page 22 Friday, June 15, 2012 2:52 PM Lorsque la mme langue est affiche deux fois ou plus, le disque est enregistr en plusieurs formats audio.

* Le nom du format et les numros de canaux saffichent de la manire suivante :

Exemple : Dolby Digital 5.1 ch Canal arrire 2 Dolby D 3 / 2 . 1 Canal avant 2 + canal central 1 Canal LFE 1 Changement du canal audio Lorsque vous faites jouer un VCD, vous pouvez couter les canaux droit et gauche, uniquement le canal droit ou uniquement le canal gauche par le biais des haut-parleurs droit et gauche. Les options sont indiques ci-dessous. Stereo : son stro standard (par dfaut) 1/Gauche : son du canal gauche (mono) 2/Droite : son du canal droit (mono) 1 Lors de la lecture, touchez plusieurs fois jusqu ce que le canal audio souhait apparaisse. Remarque Il est possible que vous ne puissiez pas changer les rglages audio selon le disque. Conseils Le fonctionnement laide de la tlcommande en appuyant plusieurs fois sur (AUDIO) est aussi disponible. Vous pouvez changer les canaux audio en appuyant sur la touche AUDIO de la tlcommande lorsquun VCD est slectionn. Rglage du niveau de sortie audio Niveau Dolby D Vous pouvez rgler le niveau de sortie audio dun DVD enregistr en format Dolby Digital pour rduire la diffrence de niveau de volume entre les disques. 1 Pendant la lecture, touchez

. 2 Touchez Volume Audio DVD . 3 Touchez /+ plusieurs fois pour rgler le niveau de sortie. Le niveau de sortie peut tre rgl par incrments uniques, entre 10 et +10. Pour fermer le menu de lecture, touchez

. 22 Lecture rpte et alatoire MPEG-4 1 Pendant la lecture, touchez ou Alatoire Rpter plusieurs fois, jusqu ce que loption souhaite saffiche. La lecture rpte ou alatoire commence. Les options de rptition et lordre de changement de chaque disque/format sont indiqus ci-dessous. Disque/

format Options DSACTIV : revient en mode de lecture normale. Chapitre : rpte le chapitre en cours. Titre : rpte le titre en cours.

*1 Tous : rpte toutes les plages sur le disque. Piste : rpte la plage en cours. Tous : rpte toutes les plages sur le disque. Piste : rpte la plage en cours. Album : rpte lalbum (le dossier) en cours. Tous : rpte tous les fichiers vido sur le disque. Film : rpte le fichier vido en cours. Album : rpte lalbum (le dossier) en cours. MPEG-4 Les options de lecture alatoire et lordre de changement de chaque disque/format sont indiqus ci-dessous. Disque/

format Options

*2

*1 DSACTIV : revient en mode de lecture normale. Titre : lit les chapitres en ordre alatoire dans le titre en cours. DSACTIV : revient en mode de lecture normale. Disque : lit les plages en ordre alatoire sur le disque en cours. XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 23 Friday, June 15, 2012 2:52 PM DSACTIV : revient en mode de lecture normale. Album : lit les plages/

fichiers vido en ordre alatoire dans lalbum (le dossier) en cours. MPEG-4

*1 Disponible uniquement lors de la lecture dun VCD de version 1.0/1.1, ou dun VCD de version 2.0 sans fonctions PBC.

*2 Excluant un DVD-R/DVD-R DL/DVD-RW en mode VR. Recherche directe MPEG-4 Vous pouvez localiser directement un point de votre choix en prcisant le numro du titre, du chapitre, etc. 1 Au cours de la lecture, appuyez sur les touches numriques de la tlcommande pour saisir le numro dun lment (plage, titre, etc.), puis appuyez sur (ENTER). La lecture commence au dbut du point slectionn. Les lments recherchs pour un disque/format sont les suivants :

DVD : Titre ou chapitre*1 VCD*2/CD/MP3/WMA/AAC : Plage Xvid/MPEG-4 : Film

*1 La rubrique de recherche dpend des rglages.

*2 Disponible uniquement lors de la lecture dun VCD sans fonctions PBC. Rglage de la rubrique de recherche

(DVD seulement) Vous pouvez rgler la rubrique de recherche (titre ou chapitre) pour la lecture de DVD. 1 Appuyez sur (HOME), puis touchez Rglages . 2 Touchez

. Le menu de rglage de la source saffiche. 3 Touchez Recherche directe DVD pour slectionner Chapitre ou Titre . La configuration est termine. Pour revenir lcran prcdent, touchez

. Affichage de la liste des plages/

fichiers vido Liste Slection dune plage/dun fichier vido MPEG-4 Vous pouvez afficher les albums/dossiers/plages/

fichiers vido, puis slectionner llment souhait pour la lecture. Cette fonction est surtout pratique pour les disques en format MP3/WMA/AAC/Xvid/

MPEG-4 comportant plusieurs albums/plages, etc. 1 Pendant la lecture, touchez

. La liste de catgories ou de fichiers de llment en cours de lecture saffiche. Pour passer au niveau suprieur, touchez

. Pour passer au niveau suprieur, touchez

. Pour faire dfiler la liste, dplacez la barre de dfilement vers le haut et le bas. 2 Touchez llment de votre choix. La lecture commence. Slection dun type de fichier MPEG-4 Si le disque contient plusieurs types de fichiers, seul le type de fichier slectionn (audio/vido) peut tre lu. Lordre de priorit de lecture du type de fichier est initialement rgl audio, puis vido (par ex. : si le disque comporte des fichiers audio et vido, seuls les fichiers audio sont lus). Vous pouvez slectionner le type de fichier afficher, puis slectionner le fichier que vous souhaitez lire. 1 Pendant la lecture, touchez 2 Touchez pour slectionner

. ou le type de fichier. 3 Touchez au fichier de votre choix. La lecture du fichier slectionn commence. 23 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm masterpage:Left 00US+00COV-U.book Page 24 Friday, June 15, 2012 2:52 PM USB Musique Lecture de musique 1 Connectez le priphrique USB au port USB. 2 Appuyez sur (HOME), puis touchez USB Musique . La lecture commence. Commandes de lecture 1 2 3 4 5 6 7 6 1 Touchez pour afficher la liste des fichiers de plage. 2 ZAP Touchez pour rechercher une plage en coutant des passages des plages.

(page 35) 3 Touchez pour passer lcran du systme de visualisation. 4 Rpter 5

/ Alatoire Touchez pour ouvrir le menu doption.

/

Touchez pour sauter un fichier de plage. Appuyez sur la touche et maintenez-la enfonce pour reculer/avancer rapidement dans une plage audio. 6 7 Touchez pour lire un fichier de plage. Touchez pour effectuer une pause de lecture. Options Pour changer le menu de rglage

(cran de lecture normale uniquement) 1 Touchez

. La liste de menu saffiche. 2 Touchez

. Les options sont indiques ci-dessous. Temps de ZAPPIN Slectionne le temps de lecture pour la fonction ZAPPIN : 6 secondes , 15 secondes , 30 secondes . Mettre jour base de donnes Recherche les fichiers de musique et les ajoute la base de donnes. A propos du Lecteur de musique Affiche la version de lapplication. Pour modifier les rglages du systme de visualisation 1 Touchez

. Lcran de lecture normal sera remplac par lcran de lecture avec systme de visualisation. 2 Touchez

. La liste de menu saffiche. 3 Touchez

. La liste du systme de visualisation saffiche. 4 Slectionnez les lments suivants :

Portail/Ballon/Brillant/Animal/Albums/

Graffiti/Encre/Alatoire Lecture rpte et alatoire 1 Pendant la lecture, touchez ou Alatoire Rpter plusieurs fois, jusqu ce que loption souhaite saffiche. La lecture rpte ou alatoire commence. Les options de lecture rpte sont les suivantes :

: rpte la totalit du groupe en cours.

: rpte le fichier de musique en cours.

: revient en mode de lecture normale. Les options de lecture alatoire sont les suivantes :

: lit les fichiers de musique de la totalit du groupe en cours dans un ordre alatoire.

: revient en mode de lecture normale. 24 Remarque Lcran de lecture avec systme de visualisation nest pas disponible lors de la lecture rpte ou alatoire. XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 25 Friday, June 15, 2012 2:52 PM Slection des fichiers de musique 1 En cours de lecture (cran de lecture

. normale uniquement), touchez La liste de catgories ou de fichiers de llment en cours de lecture saffiche. Pour faire dfiler la liste, dplacez la barre de dfilement vers le haut et le bas. 2 Touchez llment de votre choix. La lecture commence. Pour retourner lcran de lecture, touchez

. Slection des chansons partir de la bibliothque 1 Pendant que lcran de liste apparat, touchez La liste de menu saffiche. 2 Slectionnez llment de votre choix. Vous pouvez effectuer la recherche laide des lments suivants. Ttes chansons , Albums , Artistes , Genres , Anne de sortie , Ajouts rcemm. , Playlists , Dossiers . La liste slectionne saffiche. 3 Touchez llment de votre choix. La lecture commence. Profitez de la musique en fonction de votre humeur SensMe La fonction Station SensMe novatrice de Sony regroupe automatiquement des plages par canal ou humeur et vous permet dapprcier la musique de faon intuitive. Installation de Media Go sur votre ordinateur Le logiciel ( Media Go ) est ncessaire pour activer la fonction SensMe de cet appareil. 1 Tlchargez le logiciel Media Go partir du site dassistance ladresse indique sur la couverture arrire. 2 Suivez les instructions lcran pour terminer linstallation. Transfert de plages vers le priphrique USB laide de Media Go Pour activer la fonction SensMe sur cet appareil, les plages doivent tre analyses et transfres au priphrique USB enregistr laide de Media Go . 1 Raccordez le priphrique USB enregistr votre ordinateur. Dans le cas dun WALKMAN , raccordez-

le par le mode MTP. Dans le cas de priphriques USB autres que WALKMAN , raccordez-les par le mode MSC. Media Go dmarre automatiquement. Si un message est affich lcran, suivez les instructions affiches pour continuer. 2 Faites glisser et dposer les plages de Windows Explorer ou de iTunes, etc., vers Media Go . Lanalyse et le transfert des plages commencent. Pour plus de dtails sur ces oprations, consultez la rubrique Aide de Media Go . Remarque Lanalyse des plages par 12 TONE ANALYSIS peut prendre un certain temps, selon lordinateur. Conseil Ce ne sont pas seulement les fichiers audio qui peuvent tre transfrs laide de Media Go , mais aussi les fichiers image et vido. Pour plus de dtails, consultez la rubrique Aide de Media Go . 25 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm masterpage:Left 00US+00COV-U.book Page 26 Friday, June 15, 2012 2:52 PM Lecture des plages dans les canaux Station SensMe Station SensMe groupe automatiquement les plages en canaux en fonction de leurs chansons. Vous pouvez choisir et couter un canal qui rpond votre humeur, activit, etc. 1 Raccordez un priphrique USB configur pour la fonction SensMe. 2 Appuyez sur (HOME), puis touchez USB Musique . 3 Touchez 4 Parcourez la liste des canaux vers la

, puis

. gauche ou la droite. La lecture de la premire plage du canal courant dbute la section la plus mlodique ou rythmique de la plage*.

* Celle-ci pourrait ne pas tre dtecte correctement. 5 Touchez au canal de votre choix. La lecture des plages dans les canaux slectionns commence. Remarques Certaines plages pourraient ne pas tre dtectes correctement ou tre regroupes dans un canal ne correspondant pas lhumeur de la plage. Si le priphrique USB raccord contient un grand nombre de plages, le dmarrage de Station SensMe peut prendre un certain temps, cause de la lecture des donnes. Conseil Les plages sont lues en ordre alatoire. Cet ordre varie avec chaque slection de canal. Liste des canaux x Canaux de base Lit les plages selon le type de musique. nergique : musique entranante et pleine dnergie. motionnelle : ballades. Lounge : jazz et musique dambiance. Danse : musique rythme de rap et R & B. Extrme : musique intense et puissante. Gaie : musique joyeuse et stimulante. Dtente : musique calme et relaxante. Sereine : musique douce et lente. x Tout lire alat. Lit toutes les plages analyses dans un ordre alatoire. Commandes et indications de lecture Station SensMe A B C D E F G A Pour faire dfiler la liste et slectionner un autre canal. B Indique le canal courant. C Touche Option D Indique laffichage de la pochette de lalbum*. E Indique le temps coul de lecture, le nom de la plage et le nom de lartiste. F Permet de faire une pause/reprendre la lecture aprs une pause. G Permet de sauter une plage.

* La taille recommande se situe entre 240 240 et 960 960 pixels. Slection dun album par illustration de pochette 1 Pendant que lcran de liste apparat, touchez

. 2 Touchez lillustration de pochette de lalbum dont vous souhaitez effectuer la lecture. La lecture commence. Options Pour changer le menu de rglage 1 Touchez

. La liste de menu saffiche. 2 Touchez

. Les options sont indiques ci-dessous. x Recommand Matin , Journe , Soir , Nuit , Minuit Temps de ZAPPIN Slectionne le temps de lecture pour la fonction ZAPPIN : 6 secondes , 15 secondes , 30 secondes . 26 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 27 Friday, June 15, 2012 2:52 PM Mettre jour base de donnes Recherche les fichiers de musique et les ajoute la base de donnes. A propos du Lecteur de musique Affiche la version de lapplication. USB Vido Lecture de vido MPEG-4 1 Connectez le priphrique USB au port USB. 2 Appuyez sur (HOME), puis touchez USB Video . La lecture commence. Commandes de lecture Touchez lcran si les commandes de lecture ne saffichent pas. 1 2 Pour modifier le format daffichage de lalbum (lors de la slection de Albums partir de la bibliothque) 1 Touchez

. La liste de menu saffiche. 2 Touchez

, puis slectionnez Liste ou Grille . Pour changer lordre de tri des illustrations de pochette (Vue de la pochette uniquement) 1 Touchez

. La liste de menu saffiche. 2 Touchez

, puis slectionnez Trier par album ou Trier par artiste . Pour retourner lcran de lecture, touchez ou Annuler . 3 4 5 4 3 1 2 3 Touchez pour afficher la liste des fichiers vido. Touchez pour ouvrir le menu doption.

(page 28)

/

Touchez pour sauter un fichier de plage. 27 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm masterpage:Left 00US+00COV-U.book Page 28 Friday, June 15, 2012 2:52 PM 4

/

Touchez et maintenez votre doigt momentanment pour faire avancer rapidement la vido, puis touchez plusieurs fois pour modifier la vitesse

( 1,5 t 10 t 30 t 100)*. Touchez et maintenez votre doigt momentanment pour faire reculer la vido, puis touchez plusieurs fois pour modifier la vitesse ( 10 t 30 t 100)*. Pour annuler, touchez

.

/

Touchez pour passer la plage suivante/

prcdente. Pendant la pause, touchez pour faire un saut vers lavant de 15 secondes. Pendant la pause, touchez pour faire un saut vers larrire de 10 secondes. Appuyez sur la touche et maintenez-la enfonce pour reculer/avancer rapidement dans une plage vido. 5 Touchez pour lire un fichier de plage. Touchez pour effectuer une pause de lecture.

* La vitesse dpend du format ou de la mthode denregistrement utilise. Conseil Vous pouvez modifier la vitesse de lecture de manire dynamique en faisant glisser lcran du fichier vido vers la gauche ou la droite. Options Pour afficher les options Audio 1 Pendant la lecture, touchez

. La liste de menu saffiche. 2 Touchez

. La liste doptions audio saffiche. 3 Slectionnez llment de votre choix. Pour supprimer le fichier 1 Pendant la lecture, touchez La liste de menu saffiche. 2 Touchez 3 Touchez OK . Pour modifier les rglages 1 Pendant la lecture, touchez La liste de menu saffiche. 2 Touchez

. Les options sont indiques ci-dessous. Paramtres de zoom Rgle laffichage vido : Mode standard , Mode plein cran , Dsactiver . Mettre jour base de donnes Recherche les fichiers vido et les ajoute la base de donnes. propos du lecteur vido Affiche la version de lapplication. Pour retourner lcran de lecture, touchez ou Annuler . Slection des fichiers vido 1 Pendant la lecture, touchez

. La liste de catgories ou de fichiers de llment en cours de lecture saffiche. Pour faire dfiler la liste, dplacez la barre de dfilement vers le haut et le bas. 2 Touchez llment de votre choix. La lecture commence. Pour retourner lcran de lecture, touchez

. Pour modifier le format daffichage de lalbum 1 Pendant que lcran de liste apparat, touchez Les options sont indiques ci-dessous. Pour afficher des informations dtailles 1 Pendant la lecture, touchez La liste de menu saffiche. 2 Touchez

. Pour afficher les informations dtailles, dplacez la barre de dfilement vers le haut et le bas. 28

: Grille Affiche les fichiers vido sous forme de grille.

: Liste Affiche les fichiers vido sous forme de liste.

: Vue de la pochette Affiche les fichiers vido sous forme dillustrations inclines. XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 29 Friday, June 15, 2012 2:52 PM Options Pour changer lordre de tri de la liste des vidos 1 Touchez

. La liste de menu saffiche. 2 Touchez

, puis La plus ancienne en premier , La plus rcente en premier , De A Z ou De Z A . Pour modifier les rglages 1 Touchez

. La liste de menu saffiche. 2 Touchez

. Les options sont indiques ci-dessous. USB Photo Affichage des photos 1 Connectez le priphrique USB au port USB. 2 Appuyez sur (HOME), puis touchez Photo USB . 3 Touchez Ttes images ou Dossiers , puis slectionnez limage ou les dossiers. Commandes de lecture Touchez lcran si les commandes de lecture ne saffichent pas. 1 2 Paramtres de zoom Rgle laffichage vido : Mode standard , Mode plein cran , Dsactiver . Mettre jour base de donnes Recherche les fichiers vido et les ajoute la base de donnes. propos du lecteur vido Affiche la version de lapplication. Pour retourner lcran de lecture, touchez ou Annuler . 1 2 3 4 5 3 4 5 Touchez pour afficher la liste des fichiers de photo. Touchez pour ouvrir le menu doption.

/

Touchez pour sauter un fichier de photo. Appuyez sur la touche et maintenez-la enfonce pour faire reculer/avancer rapidement un fichier de photo. Touchez pour dmarrer le diaporama. Touchez lcran pour arrter le diaporama. Fait pivoter le fichier de photo vers la Fait pivoter le fichier de photo vers la gauche. droite. Conseil Vous pouvez faire reculer/avancer rapidement un fichier de photo en parcourant la liste des photos vers la gauche ou la droite. 29 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm masterpage:Left 00US+00COV-U.book Page 30 Friday, June 15, 2012 2:52 PM Options Pour retourner lcran de lecture, touchez ou Annuler . Pour afficher un diaporama 1 Pendant la lecture, touchez La liste de menu saffiche. 2 Touchez

. Le diaporama dmarre. Pour dfinir comme arrire-plan 1 Pendant la lecture, touchez

. La liste de menu saffiche. 2 Touchez 3 Touchez OK . Pour retirer limage 1 Pendant la lecture, touchez La liste de menu saffiche. 2 Touchez 3 Touchez OK . Pour afficher des informations dtailles 1 Pendant la lecture, touchez La liste de menu saffiche. 2 Touchez

. Pour afficher les informations dtailles, dplacez la barre de dfilement vers le haut et le bas. Pour modifier les rglages 1 Pendant la lecture, touchez La liste de menu saffiche. 2 Touchez

. Les options sont indiques ci-dessous. Dfinition de lintervalle entre 2 diapos Rgle lintervalle de temps : 0,5 s -

20,0 s . Lire en continu Slectionne la lecture en continu (diaporama). Mettre jour bdd Recherche les fichiers dimage et les ajoute la base de donnes. propos de la visionneuse de photos Affiche la version de lapplication. 30 Slection des fichiers de photo 1 Pendant la lecture, touchez

. La liste de catgories ou de fichiers de llment en cours de lecture saffiche. Pour passer au niveau suprieur, touchez

. Pour faire dfiler la liste, dplacez la barre de dfilement vers le haut et le bas. 2 Touchez llment de votre choix. La lecture commence. Pour afficher un diaporama 1 Touchez

. Le diaporama dmarre. Pour modifier le format daffichage 1 Touchez

. Les options sont indiques ci-dessous.

: Grille Affiche les fichiers de photo sous forme de grille.

: Liste Affiche les fichiers de photo sous forme de liste.

: Vue de la pochette Affiche les fichiers de photo sous forme dillustrations inclines.

: Vue par date (Toutes les images uniquement) Affiche les fichiers de photo dans lordre chronologique.

: Vue dtaille (Dossiers uniquement) Affiche les dossiers, suivis des sous-dossiers, ainsi que toutes les images de fichier photo contenues. Options Pour afficher un diaporama 1 Pendant la lecture, touchez La liste de menu saffiche. 2 Touchez

. Le diaporama dmarre. XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 31 Friday, June 15, 2012 2:52 PM Pour changer lordre de tri de la liste des photos 1 Touchez

. La liste de menu saffiche. 2 Touchez

, puis La plus ancienne en premier , La plus rcente en premier , De A Z ou De Z A . Pour modifier les rglages 1 Pendant que lcran de liste apparat, touchez La liste de menu saffiche. 2 Touchez

. Les options sont indiques ci-dessous. Dfinition de lintervalle entre 2 diapos Rgle lintervalle de temps : 0.5 s -

20.0 s . Lire en continu Slectionne la lecture en continu (diaporama). Mettre jour bdd Recherche les fichiers dimage et les ajoute la base de donnes. propos de la visionneuse de photos Affiche la version de lapplication. Pour retourner lcran de lecture, touchez ou Annuler . Remarques sur la lecture USB Un priphrique MSC (stockage de masse) peut tre utilis. Les codecs compatibles sont MP3 (.mp3), WMA (.wma), AAC/HE-AAC (.m4a), JPEG

(.jpg), Xvid (.avi/.xvid) et MPEG-4 (.mp4). Il est recommand deffectuer des copies de sauvegarde des donnes contenues sur le priphrique USB. Remarques Si la lecture en mode USB Video est intermittente :

Appuyez sur (HOME) ou accdez aux rglages du systme. En mode Photo USB, (Navigation), etc. Branchez le priphrique USB aprs avoir dmarr le moteur. Certains priphriques USB pourraient tre endommags ou ne pas fonctionner correctement si vous les raccordez avant de dmarrer le moteur. La lecture dun fichier de grande taille ou de nombreux fichiers peut prendre un certain temps dmarrer. Cet appareil ne peut pas reconnatre plusieurs priphriques MSC. Le signal de lecture USB Vido ou USB Photo nest pas mis depuis la borne REAR OUT. Pour dbrancher le priphrique USB Arrtez la lecture, puis dbranchez-le. Ne dbranchez pas lappareil pendant la lecture, car des donnes stockes sur le priphrique USB pourraient tre endommages. Remarques sur lutilisation Nutilisez pas de priphriques USB de grande taille ou lourds, qui risquent de tomber cause des vibrations ou dentraner un raccordement peu fiable. Ne laissez pas de priphrique USB dans un vhicule en stationnement, car cela peut entraner des problmes de fonctionnement. Cet appareil ne peut pas reconnatre les priphriques USB raccords laide dun concentrateur USB. Assurez-vous dutiliser le cble USB fourni avec le priphrique si un cble est ncessaire lors dun raccordement USB. Remarques sur la lecture Slectionnez USB Musique , USB Video ou Photo USB , selon le type de fichier du priphrique USB. Les indications affiches varient selon le priphrique USB, le format denregistrement et les rglages. Pour plus de dtails, visitez le site dassistance ladresse indique sur la couverture arrire. Un nom de dossier/fichier dun maximum de 254 octets peut tre reconnu. Le nombre maximum de fichiers de musique pouvant tre affichs est le suivant :

fichiers (plages) : 10 000 31 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm masterpage:Left 00US+00COV-U.book Page 32 Friday, June 15, 2012 2:52 PM Le dmarrage de la lecture peut prendre un certain temps, selon la quantit de donnes enregistres. Les fichiers DRM (Digital Rights Management) peuvent ne pas tre lus. Au cours de la lecture ou de lavance ou du recul rapide dun fichier VBR (Variable Bit Rate) MP3/

WMA/AAC, le temps de lecture coul peut ne pas safficher exactement. La lecture dun fichier avec compression sans perte nest pas prise en charge. iPod Pour plus de dtails sur la compatibilit de votre iPod, voir propos du iPod la page 65 ou visitez le site dassistance ladresse indique sur la couverture arrire. Dans ce mode demploi, iPod est utilis comme rfrence gnrale pour les fonctions du iPod sur le iPod et le iPhone, moins dindication contraire dans le texte ou les illustrations. Remarque Cet appareil ne peut pas reconnatre plusieurs iPod. Utilisation du iPod 1 Rduisez le niveau du volume sur cet appareil. Si le iPod est teint, mettez-le en marche. 2 Connectez le iPod au port USB. Il est recommand dutiliser le cble de raccordement USB RC-202IPV en option.*1 Un tmoin de procdure de raccordement saffiche sur lcran du iPod*2, puis la lecture commence partir de la pice joue en dernier. Si un iPod est dj raccord, touchez iPod pour dbuter la lecture.

*1 Pour regarder des vidos partir dun iPod avec vido, il est ncessaire dutiliser le cable RC-202IPV.

*2 Peut ne pas apparatre lorsquun iPod touch ou un iPhone est raccord, ou lorsque la dernire lecture du iPod a t effectue au moyen de la commande dapplication passager. 3 Rglez le volume sur cet appareil. Remarques Si un iPod touch ou iPhone est raccord cet appareil, un cran recommandant linstallation dune application peut safficher sur cet appareil. Le signal de lecture iPod vido nest pas mis depuis la borne REAR OUT. 32 Commandes et indications de lecture Vous pouvez contrler la lecture du iPod de la mme faon que pour la lecture dun disque. Pour plus de dtails, voir Commandes de lecture la page 19. Pour des dtails sur les indications de lecture, voir Indications de lecture la page 20. Pour interrompre la lecture Maintenez enfonce la touche (SOURCE/OFF) pendant 1 seconde. XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 33 Friday, June 15, 2012 2:52 PM Pour dbrancher le iPod Arrtez la lecture, puis dbranchez-le. Ne dbranchez pas le iPod au cours de la lecture car les donnes pourraient tre endommages. Pour aller en mode ZAPPIN Pour plus de dtails sur cette procdure, reportez-

vous la section Recherche dune plage en coutant des passages des plages ZAPPIN la page 35. Mode de reprise Lorsque le iPod en cours dutilisation est raccord un connecteur daccueil, le mode de cet appareil passe au mode de reprise et la lecture dbute dans le mode configur par le iPod. En mode de reprise, la lecture rpte/alatoire nest pas disponible. Mise en garde pour le iPhone Lorsque vous raccordez un iPhone par cble USB, le volume du tlphone est command par le iPhone lui-

mme. Naugmentez pas le volume de lappareil au cours dun appel afin dviter lmission de sons assourdissants aprs lappel. Remarque Cet appareil ne peut pas reconnatre un iPod par le biais dun concentrateur USB. Conseils Lorsque la cl de contact est en position ACC et que lappareil est allum, le iPod se recharge. Si le iPod est dbranch au cours de la lecture, Aucun appareil saffiche lcran de lappareil. Affichage de la liste des plages/

fichiers vido Liste Slection dune plage/dun fichier vido Vous pouvez afficher les albums/dossiers/plages/

fichiers vido, puis slectionner llment souhait pour la lecture. 1 Pendant la lecture, touchez

. La liste de catgories ou de fichiers de llment en cours de lecture saffiche. Pour passer au niveau suprieur, touchez

. Pour faire dfiler la liste, dplacez la barre de dfilement vers le haut et le bas. Pour rechercher les fichiers par ordre alphabtique, touchez Pour retourner lcran principal, touchez

. 2 Touchez llment de votre choix. La lecture commence. Slection dun type de fichier Vous pouvez slectionner le type de fichier afficher, puis slectionner le fichier que vous souhaitez lire. 1 Pendant la lecture, touchez 2 Touchez ou le type de fichier. 3 Touchez au fichier de votre choix. pour slectionner La lecture du fichier slectionn commence. Pour retourner lcran de lecture, touchez

. Slection du mode de lecture Vous pouvez rgler un des modes de lecture suivants :

Pour la lecture audio Piste , Album , Artiste , Genre , Liste de lecture , Podcast *

* Peut ne pas safficher selon le rglage du iPod. Pour la lecture vido Les modes sont identiques ceux de la lecture audio, mais les lments affichs varient en fonction du iPod. 1 Pendant la lecture, touchez 2 Touchez 3 Touchez 4 Touchez au mode de lecture souhait. Pour dbuter la lecture, touchez aux lments souhaits dans la liste. Pour faire dfiler la liste, dplacez la barre de dfilement vers le haut et le bas. ou

. 33 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm masterpage:Left 00US+00COV-U.book Page 34 Friday, June 15, 2012 2:52 PM Fonctionnement direct dun iPod Commande dapplication passager Vous pouvez faire fonctionner directement un iPod raccord cet appareil. 1 Pendant la lecture, touchez

. Dsactivation de la commande dapplication passager Pendant que loption Contrle app passager est active, touchez lcran, puis la touche Annuler . Le mode de lecture passe en mode de reprise de lecture. Remarques Limage de lapplication et la vido peuvent safficher sur cet appareil uniquement lorsque le frein main est appliqu. Lapplication et la vido peuvent tre contrles uniquement partir du iPhone et du iPod. Les applications compatibles avec la commande dapplication passager sont limites. Pour mettre une vido partir de cet appareil, vous devez activer la sortie vido du iPod. Le volume peut uniquement tre rgl sur lappareil. Les rglages de lecture rpte et lecture alatoire sont dsactivs lorsque vous annulez le mode de commande dapplication passager. Lecture rpte et alatoire 1 Pendant la lecture, touchez ou Alatoire Rpter plusieurs fois, jusqu ce que loption souhaite saffiche. La lecture rpte ou alatoire commence. Les options de lecture rpte sont les suivantes :

Pour la lecture audio Tous : rpte toutes les plages du iPod. Piste : rpte la plage en cours. Album / Podcast / Artiste / Liste de lecture / Genre * : rpte llment en cours du mode de lecture slectionn. Pour la lecture vido Tous : rpte tous les fichiers vido du iPod. Piste : rpte la vido en cours. Groupe * : rpte llment en cours du mode de lecture slectionn. Les options de lecture alatoire sont les suivantes :

Pour la lecture audio DSACTIV : revient en mode de lecture normale. Album / Podcast / Artiste / Liste de lecture / Genre * : lit les plages du mode de lecture slectionn dans un ordre alatoire. Priphrique : lit toutes les plages en ordre alatoire dans le iPod.

* Varie selon le mode de lecture slectionn. Remarque Les options affiches pourraient ne pas correspondre au fonctionnement rel. 34 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 35 Friday, June 15, 2012 2:52 PM Fonctions utiles Recherche dune plage en coutant des passages des plages ZAPPIN Vous pouvez rechercher la plage de votre choix en coutant successivement de courts passages des plages dun priphrique USB ou dun iPod. Cette fonction est pratique, par exemple, pour rechercher une plage en mode de lecture alatoire ou de lecture alatoire rpte. 1 Au cours de lcoute, touchez ZAP . Dans le cas du mode USB Musique, le mode ZAP dmarre partir de la plage en cours de lecture. Les sections les plus mlodieuses ou rythmes des plages sont lues. Ces passages sont lus pendant la dure dfinie. Remarque Les plages doivent tre analyses par 12 TONE ANALYSIS. ZAP touch. La section lue de chaque plage en mode ZAPPIN. Dans le cas du iPod, le mode ZAP dmarre partir dun passage dans la plage suivante. La section lue de chaque plage en mode ZAPPIN. ZAP touch. 2 Touchez ZAP lorsque la plage que vous souhaitez couter est lue. Dans le cas du mode USB Musique, la lecture retourne la normale, de la position actuelle jusqu la fin de la plage. Dans le cas du iPod, la plage slectionne est lue partir du dbut. Pour chercher de nouveau une plage par le biais du mode ZAPPIN, rptez les tapes 1 et 2. Conseils Vous ne pouvez pas slectionner le passage de la plage devant tre lu. Vous pouvez slectionner la dure de lecture.

, puis slectionnez le temps de Touchez lecture pour la fonction ZAPPIN : 6 secondes , 15 secondes , 30 secondes . Contrle des applications sur votre tlphone intelligent MirrorLink Cette fonction reproduit laffichage du tlphone intelligent sur laffichage dans la voiture pour vous permettre de contrler les applications de votre tlphone intelligent avec un cran de plus grande taille. Seul un tlphone intelligent compatible avec la fonction MirrorLink peut tre utilis. 1 Connectez votre tlphone intelligent lappareil laide dun cble USB. 2 Appuyez sur (HOME), puis touchez MirrorLink . Laffichage du tlphone intelligent apparat sur laffichage dans la voiture. Touchez et contrlez les applications de la mme manire que sur le tlphone intelligent. Remarque Pour votre scurit, certains contenus dcran du tlphone intelligent peuvent ne pas safficher sur le systme AVC lorsque le frein main nest pas enclench. Contrle des applications sur votre iPhone Application Telenav GPS La navigation Telenav sur votre iPhone vous permet datteindre votre destination plus rapidement, facilement et efficacement que jamais auparavant. Vous pouvez maintenant utiliser Telenav GPS avec votre rcepteur Sony. Raccordez simplement votre Telenav GPS la voiture et visionnez les directions sur lcran de votre rcepteur pendant quelles sont mises laide des haut-parleurs de la voiture. 1 Raccordez votre iPhone au port USB. 2 Dmarrez lapplication Telenav sur le iPhone. 3 Appuyez sur (HOME), puis touchez Telenav . Laffichage de lapplication Telenav apparat sur laffichage de lappareil et le fonctionnement laide de lcran tactile vous permet de contrler lapplication sur votre iPhone. Remarque La fonction Telenav est disponible uniquement sur les iPhone 4S ou iPhone 4 et le tlchargement de lapplication Telenav sur votre iPhone est requis. 35 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm masterpage:Left 00US+00COV-U.book Page 36 Friday, June 15, 2012 2:52 PM Utilisation de sources diffrentes lavant et larrire Zone Zone Changement de couleur des touches Illuminateur de couleur dynamique Vous pouvez utiliser simultanment des sources diffrentes lavant et larrire de la voiture. Les sources slectionnables pour cet appareil

(avant) et le moniteur arrire (arrire) sont indiques ci-dessous. Avant : Nimporte quelle source. Arrire : Disque insr dans cet appareil. 1 Appuyez sur la touche (HOME) de lappareil principal. 2 Touchez ZONE ZONE pour activer la fonction Zone Zone. Pour faire fonctionner la source lavant, utilisez lcran tactile et les touches de lappareil principal. Pour faire fonctionner la source larrire, utilisez la tlcommande. Conseil Vous pouvez galement activer/dsactiver la fonction Zone Zone en appuyant sur la touche (Z x Z) de la tlcommande. Pour dsactiver la fonction Zone Zone Touchez de nouveau ZONE ZONE dans le menu HOME. Remarques Lorsque vous appuyez sur la touche (SOURCE/OFF) de lappareil principal ou de la tlcommande, la fonction Zone Zone est dsactive. Lorsque la fonction Zone Zone est active, les touches suivantes de la tlcommande sont inoprantes :

(SRC), (MODE), (ATT), (VOL) +/, (CLEAR), touches numriques. Lorsque la fonction Zone Zone est active, la tlcommande permet uniquement de contrler la lecture de DVD larrire. Lorsque la fonction Zone Zone est active, les lments suivants sont dsactivs. EQ7 (page 47) Balance/quilibreur avant/arrire/Caisson de graves (page 54) Synchronisation intelligente (page 48) Haut-parleur central virtuel (page 49) HPF, LPF (page 55) Optimiseur de basses arrire (page 49) Lilluminateur de couleur dynamique vous permet de changer la couleur des touches de lappareil principal pour ladapter lintrieur du vhicule. Vous pouvez slectionner 12 couleurs prrgles, une couleur personnalise et 5 motifs prrgls. x Couleurs prrgles Rouge , Ambre , Ambre moyen , Jaune , Blanc , Vert clair , Vert , Bleu clair , Bleu ciel , Bleu , Violet , Rose . x Motifs prrgls Arc-en-ciel , Ocan , Coucher de soleil , Fort , Alatoire . 1 Appuyez sur (HOME), puis touchez Rglages . 2 Touchez

, dplacez la barre de dfilement vers le haut et le bas, puis touchez clairage des touches . 3 Dplacez la barre de dfilement vers le haut et le bas pour slectionner la couleur prrgle souhaite, puis appuyez sur celle-ci. Personnalisation de la couleur des touches Couleur personnalise Vous pouvez enregistrer une couleur personnalise pour les touches. 1 Appuyez sur (HOME), puis touchez Rglages . 2 Touchez

, dplacez la barre de dfilement vers le haut et le bas, puis touchez clairage des touches . 3 Dplacez la barre de dfilement vers le haut et le bas pour slectionner Personnalis , puis appuyez sur Rgler > . 4 Dplacez la barre de dfilement vers la gauche et la droite ou appuyez sur +/

pour rgler la gamme de couleur de R (rouge), G (vert) ou B

(bleu). Gamme de couleur rglable : 0 63 . Vous pouvez rgler la couleur tout en observant lclairage des touches. 36 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 37 Friday, June 15, 2012 2:52 PM Utilisation des Commandes gestuelles Vous pouvez effectuer des oprations rptitives en dessinant le trait de commande suivant sur lcran de rception/lecture. Dessiner une ligne verticale

(vers le bas) Faire ceci Dessiner une ligne horizontale

(gauche droite) Dessiner une ligne horizontale

(droite gauche) Dessiner une ligne verticale

(vers le haut) Pour Rception radio :

recherche des stations vers lavant.

(Semblable >.) Lecture de DVD/VCD :

sauter vers lavant un chapitre/

une plage.

(Semblable >.) Xvid/MPEG-4/lecture audio :

sauter vers lavant un fichier/

une plage.

(Semblable >.) Lecture de Pandora :

sauter une chanson.

(Semblable >.) Rception radio :

recherche des stations vers larrire.

(Semblable ..) Lecture de DVD/VCD :

sauter vers larrire un chapitre/une plage.

(Semblable ..) Xvid/MPEG-4/lecture audio :

sauter vers larrire un fichier/

une plage.

(Semblable ..) Rception radio :

rception des stations mmorises (avancer la prochaine station mmorise). Lecture de DVD/VCD/Xvid/

MPEG-4 :

avancer rapidement la vido. Lecture audio :

sauter un album vers lavant

(dossier). Lecture de Pandora :

valuation positive.

(Semblable

.) Rception radio :

rception des stations mmorises (revenir la station mmorise prcdente). Lecture de DVD/VCD/Xvid/

MPEG-4 :

recul rapide de la vido. Lecture audio :

sauter un album vers larrire

(dossier). Lecture de Pandora :

valuation ngative.

(Semblable

.) 37 XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm masterpage:Left 00US+00COV-U.book Page 38 Friday, June 15, 2012 2:52 PM Appels mains-libres et audio en continu Fonction Bluetooth Avant dutiliser la fonction Bluetooth Procdure de base de la fonction Bluetooth 1Pairage Un enregistrement mutuel est ncessaire lorsque vous connectez des priphriques Bluetooth la premire fois. Cela est dsign comme le pairage . Cet enregistrement

(pairage) est uniquement ncessaire la premire fois car cet appareil et les autres priphriques se reconnaissent automatiquement la prochaine fois. Remarque Si vous effacez lenregistrement du priphrique sur cet appareil, vous devez effectuer de nouveau le pairage. 2Connexion Aprs le pairage, raccordez cet appareil et le priphrique Bluetooth. Selon le priphrique, la connexion se fait automatiquement en mme temps que le pairage. 38 3Appels mains-libres/audio en continu Vous pouvez effectuer et recevoir des appels en mains libres ou couter une transmission audio avec cet appareil. Indications dtat Bluetooth teint : le signal Bluetooth est absent. Allum : le signal Bluetooth est prsent. teint : aucun priphrique connect pour audio en continu. Clignotant : connexion en cours. Allum : un priphrique est connect. teint : aucun tlphone cellulaire connect pour appel mains-libres. Clignotant : connexion en cours. Allum : un tlphone cellulaire est connect. Indique ltat de la force du signal du tlphone cellulaire connect. Indique ltat de la charge restante de la batterie du tlphone cellulaire connect. teint : aucun message SMS non lu. Allum : un ou plusieurs messages SMS non lus sont disponibles. Installation du microphone Vous devez installer un microphone (fourni) pour capter votre voix au cours des appels mains-

libres. Consultez le guide Installation/Raccordement fourni pour avoir des dtails sur la manire de raccorder le microphone. XAV-701HD 4-422-720-11(1) M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 M:\001\XPML A7.0\ML\4422720111_XAV-701HD_CaFR-LaES(FM7.1 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm 600dpi)\4422720111_XAV-701HD_ML\02CaFR_XAV701HD\02CaFR02CD-U.fm masterpage:Right masterpage:Right 00US+00COV-U.book Page 39 Friday, June 15, 2012 2:52 PM Pairage Le pairage est ncessaire lors de la premire connexion un priphrique Bluetooth

(tlphone cellulaire, etc.).*

Pour des dtails, consultez le manuel du priphrique Bluetooth.

* Si vous effacez lenregistrement du priphrique sur cet appareil, vous devez effectuer de nouveau le pairage. Conseil Le pairage peut seffectuer pour 9 appareils maximum. Recherche partir du priphrique Bluetooth La procdure visant rechercher cet appareil partir de lautre priphrique Bluetooth est explique ci-dessous. 1 Appuyez sur (HOME), puis touchez Rglages . 2 Touchez

, puis dplacez la barre de dfilement vers le haut et le bas. 3 Touchez Connexion Bluetooth , puis rglez le signal ACTIV . Le signal Bluetooth de cet appareil est activ. 4 Touchez Pairage > . Cet appareil est prt tre dtect par lautre priphrique Bluetooth. 5 Utilisez le priphrique Bluetooth pour rechercher cet appareil. Une liste de priphriques apparat sur la fentre daffichage du priphrique. Cet appareil est nomm Sony Automotive . DR-BT30Q Sony Automotive XXXXXXX 6 Si la saisie dun code dauthentification* est requise sur la fentre daffichage du priphrique, entrez 0000 . Entrez le code dauthentification. 0000 XXXX Cet appareil et le priphrique Bluetooth mmorisent leurs informations respectives et, une fois le pairage effectu, lappareil est prt pour la connexion au priphrique. 7 Utilisez le priphrique Bluetooth pour tablir la connexion cet appareil. Le nom du priphrique Bluetooth saffiche et la connexion est tablie. saffiche lorsque la connexion est tablie. ou

* La cl dauthentification peut galement tre nomme code dauthentification , code PIN , numro PIN , mot de passe , etc., en fonction du priphrique Bluetooth. Remarques Pendant la connexion un priphrique Bluetooth, cet appareil ne peut tre dtect par un autre priphrique. Pour activer la dtection, dbranchez lappareil de la connexion en cours. La recherche ou la connexion peut prendre quelques instants. Selon le priphrique, laffichage de confirmation de la connexion peut apparatre avant la saisie de la cl dauthentification. Le dlai de saisie de la cl dauthentification varie en fonction du priphrique. Cet appareil ne peut pas tre connect un priphrique compatible uniquement avec le profil HSP (Head Set Profile). Connexion Lorsque le contact est mis et que le signal Bluetooth est activ, cet appareil recherche le dernier priphrique Bluetooth connect et la connexion se fait automatiquement si cela est possible. Ce chapitre explique la manire de se connecter manuellement des priphriques Bluetooth enregistrs. Assurez-vous dabord dactiver le signal Bluetooth sur cet appareil (page 45) et sur lautre priphrique Bluetooth. ou Pour se connecter partir de lautre priphrique Bluetooth Mettez en marche lautre priphrique Bluetooth pour le connecter cet appareil. Lorsque la connexion est russie, saffiche dans le haut de lcran. Remarque Si la connexion est tablie pendant une transmission audio en continu, des bruits peuvent tre entendus dans la sortie audio. Conseil Vous pouvez connecter un tlphone cellulaire pour la transmission audio en continu si ce dernier est compatible avec le profil A2DP (Advanced Audio Distribution Profile). 39 XAV-701HD 4-422-720-11(1)