) World Elite
) World Elite
) World Elite
) World Elite
NOTE: The host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. The final host product still requires Part 15 Subpart B compliance testing with the modular transmitter installed. The end user manual shall include all required regulatory information/warning as shown in this manual, include:
This product must be installed and operated with a minimum distance of 20 cm between the radiator and user body.
) World Elite
) World Elite
m4)
) World Elite
) World Elite
) World Elite
) World Elite
) World Elite
) World Elite
Key Part part Reference Value 1 main chip U1 ATS2853 2 crystal YZ1 24MHz 3 Flash UF1 BH25Q32 4 Flash UF1 (option) XM25QH32
) World Elite
aD 5 mgt __z}
USB DP 10 a u 19
) World Elite
PA pa
) World Elite
) World Elite
) World Elite
ahead) ry GND Ee ~ aa Tap Cue a Sinan jc) TaN mal ND CPIO0 /CMD USB DP GPIO1/CLK eaeraA a Vial as isssmy a inet abd CTC aLee OL AKO)
(elas) 20] ae ps GPIO12 bela Ley ALS BT_RESET ety r celal ae
) World Elite
) World Elite
RA Vv 5 PAU
| RAO :
oy et V ae Nd at Pees iil iis ee
[ Flashisiese:
|B: BH2sqs2tHeD) RARER X: XM25QH32(KMC) SERRE ANTENNA SPECIFICATION trace boundary limits 2.402~2480MHz thickness 1.0mm length 9.9mm width 5.0mm shape Special shape dielectric constant 4.2~4.7 impedance 50 ohm
) World Elite