JKS2 GPS Tracker User Manual R1

 

Model name : ATS100-YZ-AATS100-YZ-TATS100-Y-A JKS2 ATS100-Y-TATS100-Z-AATS100-Z-TATS100-AATS100-T GPSTracker TableofContents 1. GETTINGSTARTED.............................................................................................6 1.1 UNPACKINGINFORMATION......................................................................................6 1.2 INTRODUCTION......................................................................................................6 2. PORTSANDLEDINDICATORS.............................................................................7 2.1 PORTS.................................................................................................................7 2.2 LEDINDICATORS....................................................................................................8 3. INSTALLATION...................................................................................................9 4. SPECIFICATIONS..............................................................................................10 1 DeclarationofConformance Manufacturer:

Name:WistronNeWebCorporation Address:20ParkAvenueII,HsinchuSciencePark,Hsinchu308,Taiwan,R.O.C We, Wistron NeWeb Corporation, declare under our sole responsibility that the productdescribedaboveconformstotherelevantUnionharmonizationlegislation:

REDirective(2014/53/EU),RoHSDirective(2011/65/EU) The following harmonized standards and/or other relevant standards have been applied:

1. HealthandSafety(Article3.1(a)oftheREDirective)

EN62311:2008

EN609501:2006/A11:2009+A1:2010+A12:2011+A2:2013 2. Electromagneticcompatibility(Article3.1(b)oftheREDirective)

FinalDraftETSIEN3014891V2.1.1,

DraftETSIEN3014893V2.1.0

FinalDraftETSIEN30148917V3.1.1

DraftETSIEN30148952V1.1.0 3. Radiofrequencyspectrumusage(Article3.2oftheREDirective)

ETSIEN3019081V11.1.1,ETSIEN3019082V11.1.1

ETSIEN300328V2.1.1

DraftETSIEN301511V12.1.10

DraftETSIEN300440V2.1.0 4. RoHSDirective(2011/65/EU)

EN50581:2012 2 SafetyInstruction

Onlyauthorizedserviceprovidersshallreplacethebatteryinthisdevice.

Donotdisassemble,open,crush,bend,deform,puncture,orshred.

Donotmodifyorremanufacture,attempttoinsertforeignobjectsintothe battery,immerseorexposetowaterorotherliquids,exposetofire,explosionor otherhazards.

Onlyusethebatterywithachargingsystemthathasbeenqualifiedwiththe systemperCTIACertificationRequirementsforBatterySystemComplianceto IEEE1725.Useofanunqualifiedbatteryorchargermaypresentariskoffire, explosion,leakage,orotherhazardousoccurrences.

Replacethebatteryonlywithanotherbatterythathasbeenqualifiedwiththe systemperthisstandard,IEEEStd1725.Useofanunqualifiedbatterymay presentariskoffire,explosion,leakageorotherhazardousoccurrences.

Promptlydisposeofusedbatteriesinaccordancewithlocalregulations.

Avoiddroppingthedeviceorbattery.Ifthedeviceorbatteryisdropped, especiallyonahardsurface,andtheusersuspectsdamage,takeittoaservice centerforinspection. Improperbatteryusemayresultinafire,explosionorotherhazardousevent.

ForthosehostdevicesthatutilizeaUSBportasachargingsource,thehost device'susermanualshallincludeastatementthatthedeviceshallonlybe connectedtoCTIAcertifiedadapters,productsthatbeartheUSBIFlogoor productsthathave 3 RegulatoryStatement SpecificAbsorptionRateinformation Thismobiledevicemeetsthegovernmentsrequirementsforexposuretoradio waves.Yourmobiledeviceisaradiotransmitterandreceiver.Theexposurestandard formobiledevicesemploysaunitofmeasurementknownastheSpecificAbsorption Rate,orSAR.TheSARlimitadoptedbyEuropeis2.0W/kgaveragedover10gramsof tissue.TestsforSARareconductedusingstandardoperatingpositionswiththe devicetransmittingatitshighestcertifiedpowerlevelinalltestedfrequencybands. Theminimumdistancebetweentheuserand/oranybystanderandtheradiating structureofthetransmitteris20cm. 4 FCCRegulations:

Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothe followingtwoconditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2) thisdevicemustacceptanyinterferencereceived,includinginterferencethatmay causeundesiredoperation. ThisdevicehasbeentestedandfoundtocomplywiththelimitsforaClassBdigital device,pursuanttoPart15oftheFCCRules.Theselimitsaredesignedtoprovide reasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.This equipmentgenerates,usesandcanradiateradiofrequencyenergyand,ifnot installedandusedinaccordancewiththeinstructions,maycauseharmful interferencetoradiocommunications.However,thereisnoguaranteethat interferencewillnotoccurinaparticularinstallationifthisequipmentdoescause harmfulinterferencetoradioortelevisionreception,whichcanbedeterminedby turningtheequipmentoffandon,theuserisencouragedtotrytocorrectthe interferencebyoneormoreofthefollowingmeasures:

Increasetheseparationbetweentheequipmentandreceiver. Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthe receiverisconnected. Consultthedealeroranexperiencedradio/TVtechnicianforhelp. Caution:Changesormodificationsnotexpresslyapprovedbythepartyresponsible forcompliancecouldvoidtheusersauthoritytooperatetheequipment. RFExposureInformation ThisdevicecomplieswithFCCradiationexposurelimitssetforthforanuncontrolled environment.InordertoavoidthepossibilityofexceedingtheFCCradiofrequency exposurelimits,humanproximitytotheantennashallnotbelessthan20cm(8 inches)duringnormaloperation. 5 1. GettingStarted 1.1 UnpackingInformation Includedinthepackagearethefollowingitems:

JKS2GPSTrackingDevice

Cablex1 1.2 Introduction TheJKS2isaselfcontainedtrackingdevicethatcombinesGPSlocationwith LTECat.1and3Gnetworkconnectivity.Thedevicerespondstouserorserver requests.Datareportscontainalllocationdataandthesystemstatus. The device comes preconfigured from the factory, ready to use. It can be updatedandconfiguredeitherthroughaserialconnection,anOTA(overthe air)IPconnection,orthroughSMSmessaging. 6 2. PortsandLEDIndicators 2.1 Ports 1 1 2 Port 8WirePort MicroUSB 2 Description Vin,GND,Opendrainoutput,GPIO6,GPI, GPIO4,GPIO5,GND Formanufactureanddebugging 7 2.2 LEDIndicators WWAN GPS Description Systemispoweringupandinitializing WWANdataconnectionacquired Indication Flashingslowly Solid Flashingquickly WWANdataconnectiontemporarilylost Off Bliponceevery 30seconds Intermittent blips Deviceisofforinhibernationmode Deviceisinmonitoringorstandbymode

(keepoff) FOTAsessionisongoing

(keepoff) Systemispoweringupandinitializing GPSsignalacquired Flashingslowly Solid Flashingquickly GPSsignaltemporarilylost Off Bliponceevery 30seconds Intermittent blips Deviceisofforinhibernationmode Deviceisinmonitoringorstandbymode

(blip) FOTAsessionisongoing

(blip) LED WWAN GPS 8 3. Installation TheimagebelowshowshowtheJKS2trackingdeviceisinstalled. 9 4. Specifications WANmodule:M14Q2FG LTECAT1(B2/4/5/12)/3G(B2/B5) GPS/GLONASS/aGPS USIM3FF Microcontroller STM32F030 ADC/UART/SPI/I2C/GPIO 5powermodecontrol Liionbattery Spec:170mAh/3.7V Maxdischargecurrent:5C Operationtemperaturerange:10Cto+60C Electromagneticbuzzer Operatingvoltage:3Vto6.5V Resonantfrequency:2700300Hz Soundoutputat10cm:83dBm Dimensions:92.8mm60mm16.5mm Interface:

8wires:Vin,GND,Opendrainoutput,GPIO6,GPI, GPIO4,GPIO5,GND MicroUSB:Formanufactureanddebugging Operatingtemperature:40Cto+75C Hardware&

software Backup battery Buzzer Mechanical Others 10 11 Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

-

-

- Connect the equipment into an outlet on a circuit different from that to Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

-

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. 12 This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. RadiationExposureStatement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 13 Industry Canada statement:

ThisdevicecomplieswithISEDslicenceexemptRSSs.Operationissubjectto thefollowingtwoconditions:(1)Thisdevicemaynotcauseharmful interference,and(2)thisdevicemustacceptanyinterferencereceived, includinginterferencethatmaycauseundesiredoperation. LeprsentappareilestconformeauxCNRdISEDapplicablesauxappareils radioexemptsdelicence.Lexploitationestautoriseauxdeuxconditions suivantes:(1)ledispositifnedoitpasproduiredebrouillageprjudiciable,et

(2)cedispositifdoitacceptertoutbrouillagereu,ycomprisunbrouillage susceptibledeprovoquerunfonctionnementindsirable. RadiationExposureStatement:

ThisequipmentcomplieswithISEDradiationexposurelimitssetforthforan uncontrolledenvironment.Thisequipmentshouldbeinstalledandoperated withgreaterthan20cmbetweentheradiator&yourbody. Dclarationd'expositionauxradiations:

Cet quipement est conforme aux limites d'exposition aux rayonnements ISEDtabliespourunenvironnementnoncontrl.Cetquipementdoittre installetutilisplusde20cmentreleradiateuretvotrecorps. 14