| submitted | available | document details (if available) | source link |
|---|---|---|---|
| Adobe PDF Library 11.0 |
| various | Manual | Users Manual | 4.20 MiB |
STRATUS XL CONTENTS CONTROLLER 2X AA BATTERIES COMPATIBILITY - Requires iOS 7 or newer on one of the following devices:
iPhone 6, iPhone 6 Plus, iPhone 5, iPhone 5c, iPhone 5s or later. iPad mini, iPad mini with Retina, iPad air, iPad 4th generation or later. iPod touch 5th generation or later. MAC SUPPORT - Works with Mavericks or later. 1 MORE INFO SUPPORT.STEELSERIES.COM FAQ.STEELSERIES.COM SHOP.STEELSERIES.COM 2 INITIALIZATION 1. Turn on controller by sliding the power switch on the underside of the controller. 2. LEDs will light up solid for the first five seconds, indicating battery life. 3. All four LEDs will flash ON and OFF evenly when the Controller is not paired. 4. To pair the Controller, go to your iOS device and follow the User Interface flow below:
Settings > Turn On Bluetooth > Search for new Devices SteelSeries Stratus XL will be displayed on the screen. Click to Connect via Bluetooth. 5. If the Controller has paired successfully, the LEDs will flash ON and OFF unevenly (rapidly). 6. If the Controller is paired and the user starts a game, one of the four LEDs will light up solid, depending on the player number (1-4) assigned. 7. When the Controller battery charge gets low (~20 minutes remaining), the LEDs will start flashing continuously for 5 seconds. 3 ADDITIONAL NOTES The Stratus XL will remember the last paired iOS Device. When you reset the power on the Stratus XL, it will automatically connect to the last paired iOS device. If you are already connected to an iOS device and want to change the device that youre playing on, there are two ways to do this, as follows:
1. If you want to erase the history of all the devices stored on your controller, hold down the pairing button on the back of the controller for 5 seconds. The LEDs should blink 1 and 3 followed by 2 and 4. This means that all of the history stored in the controller has been erased, it will enter pairing mode, and it will search for new iOS Devices (refer to the image below).
[NOTE: We highly recommend option #1 over option #2]
2. If you want the controller to enter pairing mode without erasing prior history, press the pairing button for 2 seconds. The LEDs should blink 1 and 2 followed by 3 and 4. This means that the controller is in pairing mode and will search for new devices (refer to the image below). Please go to www.steelseries.com/stratusXL/faq for more detailed product information. 4 INITIALISATION 1. Allumez la manette en faisant glisser linterrupteur situ en dessous. 2. Des LED sallumeront en fixe pendant les cinq premires secondes, indiquant le niveau de batterie. 3. Les quatre LED clignoteront de manire rgulire si la manette nest pas appaire. 4. Pour appairer la manette, rendez-vous sur votre appareil iOS et suivez les instructions de lInterface Utilisateur :
Paramtres > Allumer Bluetooth > Recherche de nouveaux appareils SteelSeries Stratus XL sera affich sur lcran. Cliquez pour vous connecter via Bluetooth. 5. Si la manette sest appaire avec succs, les LED clignoteront de manire irrgulire (rapidement). 6. Si la manette est appaire et que lutilisateur lance un jeu, une des quatre LED sallumera en fixe, selon le numro de joueur (1 4) assign. 7. Lorsque la charge de la batterie est basse (- de 20 minutes restantes), les LED se mettent clignoter de manire continue pendant 5 secondes. 5 NOTES SUPPLMENTAIRES La Stratus XL se souviendra du dernier appareil iOS appair. Lorsque vous rinitialisez lalimentation de la Stratus XL, elle se connecte automatiquement au dernier appareil iOS appair. Si vous tes dj connect un appareil iOS et que vous souhaitez changer lappareil sur lequel vous jouez, voici les deux faons de procder :
1. Si vous souhaitez effacer lhistorique de tous les appareils stock dans votre manette, maintenez le bouton dappairage larrire de la manette pendant 5 secondes. Les LED 1 et 3 devraient clignoter, puis 2 et 4. Ceci signifie que tout lhistorique stock dans la manette a t effac. Elle passera ensuite en mode appairage et cherchera un nouvel appareil iOS (rfrez-vous limage ci-dessous).
[REMARQUE : Nous vous recommandons fortement loption n 1 plutt que loption n 2]
2. Si vous souhaitez que la manette passe en mode appairage sans effacer lhistorique prcdent, appuyez sur le bouton dappairage pendant 2 secondes. Les LED 1 et 2 devraient clignoter, puis 3 et 4. Cela signifie que la manette est en mode dappairage et cherche de nouveaux appareils (rfrez-vous limage ci-dessous). Veuillez visiter www.steelseries.com/stratusXL/faq pour des informations dtailles sur le produit. 6 INICIO 1. Encienda el controlador deslizando el interruptor de encendido en la parte inferior del controlador. 2. Los LED se iluminan en forma constante durante los primeros cinco segundos, lo que indica la duracin de la batera. 3. Los cuatro LED se encienden y apagan uniformemente cuando el controlador no est vinculado. 4. Para vincularlo, siga la siguiente ruta de interfaz del usuario en su dispositivo iOS:
Configuracin > Encender Bluetooth > Buscar dispositivos nuevos SteelSeriesStratus XL aparecer en la pantalla. Haga clic en Conectarse va Bluetooth. 5. Si el controlador se vincul correctamente, se encendern y apagarn los LED rpidamente (en forma desigual). 6. Si el controlador est vinculado y el usuario abre un juego, uno de los cuatro LED se enciende continuamente, segn el nmero de jugador asignado (de 1 a 4). 7. Cuando la carga de la batera del controlador es baja (~20 minutos restantes), los LED se encienden intermitentemente durante 5 segundos. 7 NOTAS ADICIONALES El Stratus XL recordar el ltimo dispositivo iOS vinculado. Cuando reinicie el Stratus XL, se conecta automticamente al ltimo dispositivo iOS vinculado. Si ya est conectado a un dispositivo iOS y quiere cambiar el dispositivo en el que juega, puede hacerlo de las dos maneras siguientes:
1. Si quiere borrar el historial de todos los dispositivos almacenados en su controlador, mantenga presionado el botn de vinculacin en la parte trasera del controlador durante 5 segundos. Primero deberan parpadear los LED 1 y 3 y luego 2 y 4.
[NOTA: Recomendamos ampliamente la opcin 1 en lugar de la 2]. 2. Si quiere que el controlador est en modo de vinculacin sin borrar el historial previo, presione el botn de vinculacin durante 2 segundos. Primero deberan parpadear los LED 1 y 3 y luego 2 y 4. De esta manera, el controlador se encuentra en modo de vinculacin y buscar dispositivos nuevos (consulte la siguiente imagen). Dirjase a www.steelseries.com/stratusXL/faq para obtener informacin detallada del producto. 8 INIZIALIZZAZIONE 1. Per attivare il controller sufficiente spostare il pulsante di accensione situato nella parte inferiore del controller. 2. I LED rimarranno accesi per i primi cinque secondi per indicare la durata della batteria. 3. Tutti e quattro i LED si accenderanno e spegneranno contemporaneamente nel caso in cui il controller non sia stato ancora associato. 4. Per associare il controller, seguire le istruzioni mostrate sullinterfaccia utente del proprio dispositivo iOS:
Impostazioni > Attiva Bluetooth > Ricerca nuovi dispositivi Il controller SteelSeries Stratus XL verr visualizzato sullo schermo. Fare clic per collegare mediante Bluetooth. 5. In caso di associazione del controller riuscita, i LED lampeggeranno in maniera non uniforme (rapidamente). 6. Nel caso in cui il controller risulti associato e lutente abbia iniziato una partita, a seconda del numero assegnato al giocatore (da 1 a 4), uno dei quattro LED rimarr acceso. 7. Quando il livello di carica della batteria al minimo (~20 minuti rimanenti), i LED inizieranno a lampeggiare continuamente per 5 secondi. 9 NOTE AGGIUNTIVE Il controller Stratus XL in grado di memorizzare lultimo dispositivo iOS associato. In caso di riavvio, il controller Stratus XL si ricollegher automaticamente allultimo dispositivo iOS associato. Qualora si desideri cambiare dispositivo su cui giocare anche se gi collegati a un dispositivo iOS, le opzioni possibili sono due:
1. Per cancellare la cronologia di tutti i dispositivi associati al controller, tenere premuto per 5 secondi il pulsante di associazione presente sul retro del controller, Lampeggeranno prima i LED 1 e 3 seguiti da 2 e 4. Ci significa che tutti i dati archiviati nel controller sono stati rimossi, per cui il controller pu essere riassociato e inizier la ricerca di nuovi dispositivi iOS (vedere immagine sottostante).
[NOTA: si raccomanda lutilizzo dellopzione 1 rispetto allopzione 2]
2. Per consentire al controller di entrare in modalit associazione senza cancellare la cronologia dei dispositivi, premere il pulsante di associazione per 2 secondi. Lampeggeranno prima i LED 1 e 2 seguiti da 3 e 4. Ci significa che il controller si trova in modalit associazione e che inizier la ricerca di nuovi dispositivi (vedere immagine sottostante). Per ulteriori informazioni sul prodotto, visitare www.steelseries.com/stratusXL/faq 10 1. , . 2. , . 3. , . 4. , iOS :
> Bluetooth >
SteelSeries Stratus XL. Bluetooth. 5. (). 6. , ,
(1-4). 7. ( 20 ) 5 . 11 Stratus XL iOS
. iOS , :
1. , 5 . 1- 3- , 2- 4-. , . iOS (. ).
[: 1- 20-]
2. , , 2- . 1- 2- , 3- 4-. ,
, iOS (. ). www.steelseries.com/stratusXL/faq 12 1. 2. LED 3. LED 4. iOS
> Bluetooth >
SteelSeries Stratus XLBluetooth 5. LED 6. LED1-4 7. 20LED 13 Stratus XLiOSStratus XLiOS iOS 1. 13LED 24LED iOS
[]
2. 12LED 34LED www.steelseries.com/stratusXL/faq 14 1. 2. LED 3. LED 4. iOS
> Bluetooth >
SteelSeries Stratus XLBluetooth 5. LED 6. LED1-4LED 7. 20LED 15 Stratus XLiOSStratus XLiOS iOS 1. 13LED 24LED iOS
[]
2. 12LED 34LED www.steelseries.com/stratusXL/faq 16 1. 2. LED5 3. 3. 4LED 4. iOS:
> Bluetooth >
SteelSeries Stratus XL Bluetooth 5. LED () 6. (1-4) 4LED1 7. 20LED5 17 Stratus XLiOSStratus XL iOS iOS2 1. 5LED1324
, iOS
[: 1]
2. 2 LED1234
() www.steelseries.com/stratusXL/faq 18 1. . 2. LED 5 . 3. LED 4 . 4. , iOS :
> Bluetooth >
SteelSeries Stratus XL , Bluetooth . 5. , LED (). 6. , (1-4) LED 4
. 7. (-20 ), the LED 5 . 19 Stratus XL iOS . Stratus XL , iOS . iOS , :
1. , 5
. LED 1, 3, 2, 4 . iOS . ( )
[: 2 1 ]
2. , 2
. LED 1, 3, 2, 4 .
. ( ). www.steelseries.com/stratusXL/faq . 20 SAFETY TIPS FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. INDUSTRY CANADA STATEMENT:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme la norme CNR-210 dIndustrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. SINGAPORE WIRLESS CERTIFICATION:
Complies with IDA Standards DA104328 21 MSIP-CRM-
SS4-GC-00001 iPad, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. And other countries. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license. Bluetooth is a registered trademark of Bluetooth SIG, Inc. Made for iPod, Made for iPhone, and Made for iPad mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireles performance. 22 WWW.STEELSERIES.COM
This product uses the FCC Data API but is not endorsed or certified by the FCC