TPCL3A Handheld Portable Transceiver Exhibit D Users Manual per 2 1033 c3

 

Directive 1999/5/EC Declaration of Conformity Dansk da Undertegnede Tait Electronics Limited erklrer herved, at flgende udstyr TPCB1A, TPCH5A & TPCH6A overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF. Se endvidere: http://eudocs.taitworld.com/

Deutsch de Hiermit erklrt Tait Electronics Limited die bereinstimmung der Gerte TPCB1A, TPCH5A & TPCH6A mit den grundlegenden Anforderungen und den anderen relevanten Festlegungen der Richtlinie 1999/5/EG. Siehe auch: http://eudocs.taitworld.com/

el Tait Electronics Limited TPCB1A, TPCH5A & TPCH6A 1999/5/.

: http://eudocs.taitworld.com/

English en Tait Electronics Limited declares that this TPCB1A, TPCH5A & TPCH6A complies with the essential requirements and other relevant provisions of Directive 1999/5/EC. See also: http://eudocs.taitworld.com/

Espaol es Por medio de la presente Tait Electronics Limited declara que el TPCB1A, TPCH5A &

TPCH6A cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Vea tambin: http://eudocs.taitworld.com/

fi Tait Electronics Limited vakuuttaa tten ett TPCB1A, TPCH5A & TPCH6A tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimus-

Suomi ten ja sit koskevien direktiivin muiden ehtojen mukainen. Katso: http://eudocs.taitworld.com/

Franais fr Par la prsente, Tait Electronics Limited dclare que l'appareil TPCB1A, TPCH5A &

TPCH6A est conforme aux exigences essen-

tielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Voir aussi: http://eudocs.taitworld.com/

Italiano it Con la presente Tait Electronics Limited dichi-

ara che questo TPCB1A, TPCH5A & TPCH6A conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Vedi anche: http://eudocs.taitworld.com/

Nederlands nl Hierbij verklaart Tait Electronics Limited dat het toestel TPCB1A, TPCH5A & TPCH6A in overeenstemming is met de essentile eisen en de andere relevante bepalingen van rich-

tlijn 1999/5/ EG. Zie ook: http://eudocs.taitworld.com/

Portugus pt Tait Electronics Limited declara que este TPCB1A, TPCH5A & TPCH6A est conforme com os requisitos essenciais e outras provises da Directiva 1999/5/CE. Veja tambm: http://eudocs.taitworld.com/

Svensk sv Hrmed intygar Tait Electronics Limited att denna TPCB1A, TPCH5A & TPCH6A str I verensstmmelse med de vsentliga egen-

skapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG. Se ven: http://eudocs.taitworld.com/

MPC-00001-01 Issue 1 Tait Electronics Limited 2007 May 2007. All rights reserved. 3 Chassis engraving will void warranty Warning: Engraving the chassis of your partable radio can significantly reduce its mechanical strength and will void any warranty. If the chassis has been engraved, it must be replaced. Copyright and trademarks All information contained in this manual is the property of Tait Electronics Limited. All rights reserved. This manual may not, in whole or in part, be copied, photocopied, reproduced, translated, stored, or reduced to any electronic medium or machine-readable form, without prior written permission from Tait Electronics Limited. The word TAIT and the TAIT logo are trademarks of Tait Electronics Limited. All trade names referenced are the service mark, trademark or registered trademark of the respective manufacturers. Disclaimer There are no warranties extended or granted by this manual. Tait Electronics Limited accepts no responsibility for damage arising from use of the information contained in the manual or of the equipment and software it describes. It is the responsibility of the user to ensure that use of such informa-

tion, equipment and software complies with the laws, rules and regulations of the applicable jurisdictions. Enquiries and comments If you have any enquiries regarding this manual, or any comments, suggestions and notifications of errors, please contact Technical Support. 4 Updates of manual and equipment In the interests of improving the performance, reliability or servicing of the equipment, Tait Electronics Limited reserves the right to update the equipment or this manual or both without prior notice. Intellectual property rights This product may be protected by one or more patents of Tait Electronics Limited together with their international equiva-

lents, pending patent applications and registered trade marks: NZ338097, NZ508054, NZ508340, NZ508806, NZ508807, NZ509242, NZ509640, NZ509959, NZ510496, NZ511155, NZ511421, NZ516280/519742, NZ519118, NZ519344, NZ520650/537902, NZ522236, NZ524369, NZ524378, NZ524509, NZ524537, NZ524630, NZ530819, NZ534475, NZ534692, NZ535471, NZ536945, NZ537434, NZ546295, NZ547713, NZ521450, AU2003281447, AU2002235062, AU2004216984, AU2005207405, CA2439018, CA2554213, EU03784706.8, EU02701829.0, EU04714053.8, EU05704655.9, GB23865476, GB2386010, GB2413249, GB0516092.4, US11,232716, US10/597339, US10/520827, US10/468740, US5,745,840, US10/547653, US10/546696, US10/547964, US10/523952, US11/572700. To our European customers Tait Electronics Limited is an environmentally responsible company which supports waste minimization and material recovery. The European Unions Waste Electrical and Elec-

tronic Equipment Directive requires that this product be disposed of separately from the general waste stream when its service life is over. Please be environmentally responsible and dispose through the original supplier, your local munici-

pal waste separate collection service, or contact Tait Electronics Limited. 5 Disposing of Lithium-ion batteries Discharge the Li-ion battery before disposing of it. When disposing of the battery, be sure to do so in an environmentally sensitive manner. If disposed of in landfills, batteries can be very hazardous to the environment. Please contact your radio provider for information on recycling programs in your area. Charger compliance information United States This battery charger has been tested and found to comply with the limits for a Class B digital device, in accordance with part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This battery charger generates, and can radiate, radio frequency energy. If it is not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur. If this charger does cause harmful interference to radio or television reception (which can be determined by turning the charger off and on), try to correct the interference by:

Reorienting or relocating the receiving antenna. Increasing the separation between the equipment and receiver. Connecting the equipment into an outlet on a circuit dif-

ferent from that to which the receiver is connected. Consulting the dealer or an experienced radio/TV techni-

cian for help. Canada This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. 6 For your safety Before using your radio, please read the following important safety and compliance information. Safety warnings used in this guide Within this guide, the following conventions are used to alert you to important safety information:

Warning: There is a potential risk of death or serious injury. Caution: There is the risk of minor or moderate injury to people. Caution: Caution is used without the safety alert symbol when there is a risk of equipment damage or malfunction. Radio frequency exposure information For your own safety and to ensure you comply with the Federal Communication Commissions (FCC) radio frequency (RF) exposure guidelines, please read the following information before using this radio. Using this radio You should use this radio only for work-related purposes (it is not authorized for any other use) and if you are fully aware of, and can exercise control over, your exposure to RF energy. To prevent exceeding FCC RF exposure limits, you must control the amount and duration of RF that you and other people are exposed to. It is also important that you:

Do not remove the RF Exposure label from the radio. Ensure this RF exposure information accompanies the radio when it is transferred to other users. Do not use the radio if you do not adhere to the guide-

lines on controlling your exposure to RF. For your safety 7 Controlling your exposure to RF energy This radio emits radio frequency (RF) energy or radio waves primarily when calls are made. RF is a form of electromag-

netic energy (as is sunlight), and there are recommended levels of maximum RF exposure. To control your exposure to RF and comply with the maxi-

mum exposure limits for occupational/controlled environ-

ments, follow these guidelines:

Do not talk (transmit) on the radio more than the rated transmit duty cycle. This is important because the radio radiates more energy when it is transmitting than when it is receiving. When listening and talking on the radio, hold it upright in front of your face so that it is at least one inch (2.5 cm) away from any part of your face. Keeping the radio at the recommended distance is important because exposure to RF decreases rapidly the further away the antenna is from your body. Keep the antenna at least one inch (2.5 cm) from your face at all times. If you wear your radio, you must always put it in a carry-

ing accessory that has been specifically approved by Tait for this radio. Using non-approved body-worn accessories may mean you expose yourself to higher levels of RF than recommended by the FCCs occupational/controlled envi-

ronment RF exposure limits. Ensure you only use Tait-approved antennas, batteries, and accessories. Website: For more information on what RF energy is and how to control your exposure to it, go to http://www.fcc.gov/oet/rfsafety/rf-faqs.html. 8 For your safety Compliance with RF energy exposure standards This two-way radio complies with these RF energy exposure standards and guidelines:

United States Federal Communications Commission, Code of Federal Regulations; 47 CFR 1.1307, 1.1310, and 2.1093. American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers (IEEE) C95.1-1992. Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition. This radio complies with the IEEE and ICNIRP exposure limits for occupational/controlled RF exposure environments at operating duty factors of up to 50% transmitting (even though the approved batteries for this radio are rated for a 5-5-90 duty factor (5% talk-5% listen-90% standby). Radio frequency emissions limits in the USA Part 15 of the FCC Rules imposes RF emission limits on receivers. This radio complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Unapproved modifications or changes to radio The radio is designed to satisfy the applicable compliance regulations. Do not make modifications or changes to the radio that are not expressly approved by Tait Electronics Limited. Failure to do so could invalidate compliance require-

ments and void the users authority to operate the radio. For your safety 9 Health, safety and electromagnetic compatibility in Europe In the European Community, radio and telecommunications equipment is regulated by Directive 1999/5/EC, also known as the Radio and Telecommunications Terminal Equipment

(R&TTE) directive. The requirements of this directive include protection of health and safety of users, as well as electromagnetic compatibility. Intended purpose of product This product is an FM radio transceiver. It is intended for radi-

ocommunication in the Private Mobile Radio (PMR) or Public Access Mobile Radio (PAMR) services, to be used in all member states of the European Union (EU) and states within the European Economic Area (EEA). Restrictions This product can be programmed to transmit on frequencies that are not harmonized throughout the EU/EEA, and will require a licence to operate in each member state. This product can be programmed for frequencies or emissions that may make its use illegal. Where applicable, a license must be obtained before this product is used. All license require-

ments must be observed. Limitations may apply to transmitter power, operating frequency, channel spacing, and emission. Declaration of conformity Brief Declarations of Conformity appear on page 3. Website: To download the formal declaration of conformity, go to http://eudocs.taitworld.com/. A signed and dated paper copy of the declaration of conformity can be obtained from Tait Electronics Limited. 10 For your safety Electromagnetic compatibility in European vehicles In the European Community, radio equipment fitted to auto-

motive vehicles is regulated by Directive 72/245/EEC, as last amended by 2005/83/EC. The requirements of this directive cover the electromagnetic compatibility of electrical or elec-

tronic equipment fitted to automotive vehicles. Interference with electronic devices Some electronic devices may be prone to malfunction due to the lack of protection from RF energy that is present when your radio is transmitting. Examples of electronic devices that may be affected by RF energy are:

vehicular electronic systems such as fuel injection, anti-

skid brakes, and cruise control medical devices such as hearing aids and pacemakers medical equipment in hospitals or health care facilities. Consult the manufacturer (or its representative) of the equip-

ment to determine whether these electronic circuits will perform normally when the radio is transmitting. Frequency band reserved for distress beacons Frequency band 406 to 406.1 MHz is reserved for use by distress beacons. Transmissions should not be made within this frequency band. For your safety 11 Safe radio operation Warning: Switch off the radio:

At petrol filling stations or near flammable liquids or gases. In the vicinity of explosive devices and blasting zones. Before boarding an aircraft. Using your radio while in the air is not permitted. Using a handheld microphone or a radio while driving a vehi-

cle may violate the laws and legislation that apply in your country or state. Please check the vehicle regulations in your area. 12 For your safety Navigating your radios menus The menu text on your radio display may differ from that shown here. Menu text can be customized when the radio is programmed. Menu map Main Menu Queued Calls Select Channel Select Bank Send Selcall Dial Selcall (TP8120 only) Select Status Send DTMF Alpha Symbols Send SDM [Short Data Message]

User Settings Handset Low Pwr Keylock DTMF Economy Squelch Monitor Sq Ovrd [Squelch Override]

Alert Settings Tones Level Keytone Display Settings Night RSSI Adjust Contrast Advanced Settings Program Group Program Signal Program FS-Group [Flexiscan]

Version Info FW Ver HW Ver Main DB Cal DB Radio controls For more information about the radio controls, see About the radio controls on page 19. channel selector power/

volume control function key 1 PTT key

(press-to-talk) function key 2 top key status LED accessory connector

(out-of-sight) speaker/

microphone alphanumeric keys Contents Directive 1999/5/EC Declaration of Conformity ............................................ 3 For your safety ............................................................................................. 7 Safety warnings used in this guide .......................................................... 7 Radio frequency exposure information .................................................... 7 Controlling your exposure to RF energy .................................................. 8 Compliance with RF energy exposure standards ..................................... 9 Radio frequency emissions limits in the USA ........................................... 9 Unapproved modifications or changes to radio ....................................... 9 Health, safety and electromagnetic compatibility in Europe ................... 10 Electromagnetic compatibility in European vehicles ............................... 11 Interference with electronic devices ...................................................... 11 Frequency band reserved for distress beacons ....................................... 11 Safe radio operation ............................................................................. 12 Navigating your radios menus ............................................................. 13 Before using your radio .............................................................................. 17 For your safetybattery warning ........................................................ 17 Charging the battery before first use ..................................................... 17 Attaching the battery ............................................................................ 17 Attaching the antenna .......................................................................... 18 Attaching a belt clip ............................................................................. 18 Removing the accessory cover .............................................................. 18 Getting started ........................................................................................... 19 About the radio controls ....................................................................... 19 About the keypad ................................................................................. 21 Understanding the radio display ........................................................... 22 Understanding the radio indicators ....................................................... 24 Navigating the radio menus ................................................................. 26 Basic operation .......................................................................................... 28 Turning the radio on and off ................................................................. 28 Entering your personal identification number ........................................ 28 Adjusting the volume ........................................................................... 29 About the channels and channel banks ................................................ 29 Understanding how the radio displays channels ................................... 31 Making a call ....................................................................................... 32 15 Receiving a Call .................................................................................... 33 Scanning for channel activity ................................................................ 34 Hearing all activity on a channel ........................................................... 36 Checking that a channel is clear ........................................................... 37 Making and receiving different types of calls .............................................. 38 Making an individual or group call ....................................................... 38 Resending calls automatically ............................................................... 40 Receiving an individual or group call .................................................... 41 Responding to missed calls ................................................................... 41 Informing other radio users of your status ............................................ 42 Calling a telephone or a remote device ................................................. 43 Making an emergency call .................................................................... 44 Activating the automated emergency call feature ................................. 45 Sending and receiving text messages ................................................... 46 Changing your radios settings ................................................................... 48 Changing display settings (Display Settings menu) ................................ 48 Changing operational settings (User Settings menu) ............................. 50 Changing Audible Tone Settings (Alert Settings Menu) ......................... 54 Charging and caring for batteries ............................................................... 57 Radio low battery warning ................................................................... 57 Removing the battery ........................................................................... 58 Before changing the battery ................................................................. 58 Charging the battery ............................................................................ 58 Storing batteries ................................................................................... 59 Disposing of batteries ........................................................................... 60 Troubleshooting ......................................................................................... 61 When your radio wont turn on ............................................................ 61 Removing a belt clip ............................................................................. 61 Checking the version of your radio ....................................................... 62 Troubleshooting your charger ............................................................... 62 General care ........................................................................................ 63 Cleaning the radio ................................................................................ 63 Function key options .................................................................................. 64 Common functions ............................................................................... 64 Tait general software licence agreement .................................................... 66 16 Before using your radio Once you have unpacked your radio, there are a few tasks you must do before you can use it. The most important of these is to charge your battery for the first timeallow 12 hours for this. This section covers:

for your safetybattery warning charging the battery before first use attaching the battery attaching the antenna attaching a belt clip removing the accessory cover. For your safetybattery warning Warning: Before using your battery or charger, please read the important safety information included with your battery. If you are using a Lithium-ion battery, special care must be taken to avoid personal injury or property damage. Charging the battery before first use Before using your battery for the first time, you must charge it. Follow the instructions included with your Tait charger. Note: The radio must be turned off if placed in the charger with the battery. Attaching the battery To fit the battery pack to the radio:

1 Insert the bottom edge of the battery into the two slots at the back of the radio. 2 Press down on the top of the battery to snap it into place. Before using your radio 17 To remove the battery pack:

1 Press the battery catch down. 2 From the sides, pull the battery away from the radio. Attaching the antenna Before using the radio, screw the antenna clockwise into the antenna connector. The antenna should be screwed suffi-

ciently tight so that it doesnt unscrew easily. This is impor-

tant as it creates a seal. Attaching a belt clip To attach a belt clip to your radio:

1 Slide the belt clip into the two grooves at the top of the battery. belt clip battery 2 Press down on the belt clip until it snaps into place. See also Removing a belt clip on page 61. Removing the accessory cover To fit some accessories to the radio, you will need to remove the accessory cover, using a coin. 18 Before using your radio Getting started This section provides a brief description of your radios controls and indicators and explains how to use the radios menus. This section covers:

about the radio controls about the keypad understanding the radio display understanding the radio indicators navigating the radio menus. About the radio controls The radio controls are the PTT key, power/volume control, channel selector, scroll keys, selection keys and function keys. Some keys have functions assigned to both short and long key presses:

a short key press is less than one second, and a long key press is more than one second. The radio controls and their functions are described in the following sections. About the function keys The function keys provide quick access to features you use most often. These features are assigned to the function keys when the radio is programmed. Some keys may have a features associated with both a short keypress and a long keypress. See Function key options on page 64 for a list of features that may have been assigned to the function keys. Getting started 19 top key status LED accessory connector

(out-of-sight) speaker/

microphone alphanumeric keys channel selector power/

volume control function key 1 PTT key

(press-to-talk) function key 2 Symbol Name PTT key Function Press and hold to transmit and release to listen Rotate to turn on the radio and change the speaker volume Power/volume control Channel selector Select and change channels Top key Usually programmed as the emergency key or for a frequently used function 20 Getting started Symbol Name Function keys 1 and 2 Enter Left arrow Right arrow Clear Function Programmed for frequently used features Short: Select a function, toggle a function on/off (menu mode); dial or send a message Long: Enter/exit mode or menu Short: Scroll left Short: Scroll right Short: Cancel or back (menu mode);

delete single character; cancel call. Long: Delete (menu mode); exit without saving (menu mode); cancel call; keypad lock off. About the keypad On radios with an alphanumeric keypad, keys 0 to 9 and letters A to Z are used for dialling numbers and codes. Using the keypad to enter text When the keypad is used to enter text, the keys have special functions. Use the alphanumeric keys to enter letters, numbers and punctuation.

: character 1. Key Keys to

: press a key once to enter the first letter on that key. Repeat the process to enter the other letters and the number. Key

: press once to enter a space. Further keypresses enter the following characters:

0 # * . , ! ? : ; @ ( ) + _ - + = / $ &

To delete a character: use the arrow keys to select the character and press the clear key to delete it. Getting started 21 Understanding the radio display The messages and symbols you see on your radio display depend on the mode in which your radio is operating and the way it is programmed.The following diagram shows a typical display and explains some of the information that may be available. active modes symbols CHAN RTA CAR 2 current operation information Operating modes Your radio has a number of operating modes, such as CHAN

(channel), MENU (menu), and CONT (contrast). The active mode appears in the upper left-hand corner of the display. The lower left-hand corner gives additional information on the current status of the radio. In this example, RTA indicates the radio is in repeater talkaround mode. Current operation The panel on the right-hand side shows data for the current radio operation. In this example, CHAN9 indicates what channel the radio is currently operating on. When you enter data for a specific function, such as dialling a call, the information appears in this panel. Radio display symbols The bottom line of the display shows a series of symbols that give additional information on the state of the radios. The following table shows some of symbols you may see on your display. 22 Getting started Symbol Meaning Flashing: recharge the battery The battery is charged The radio is in DTMF dialling mode Monitor or squelch override is active Scrolling is permitted Steady: the radio is scanning a group of channels for activity. Flashing: activity has been found on a channel in the scan group. The radio is transmitting. Steady: low power transmit mode is active Flashing: the radio is transmitting at low power Steady: an auxiliary device is operating Flashing: lone worker mode is active Your currently selected channel is busy Getting started 23 Understanding the radio indicators The status LED indicators and the radios audible tones together with the radio displayall combine to give you information about the state of your radio.The most common way the indicators work is described in the following sections. Note: The way these indicators behave may be affected by the way your radio is programmed. Status LED indicator Colour red red red red red green green green amber amber amber Flash rate Meaning Steady slow Transmitting. Battery low. Radio will also emit low-

pitched beeps. Recharge or replace as soon as possible. two fast flashes medium Low power transmit mode active fast Radio is stunned. Radio also emits high-

pitched beeps. Contact your dispatcher. The power-up sequence is complete. Radio also emits two medium-pitched beeps. Channel busy Economy mode is active steady slow medium Monitor or squelch override is active steady Radio is scanning or voting a group of channels for activity or greatest signal strength Repeater talkaround is active slow medium Activity detected on one of a group of channels being scanned. A Selcall call has been received Radio programmed incorrectly or faulty. Contact your radio provider. amber red/green fast fast 24 Getting started Audible tones The radio uses a variety of beeps and tones to supplement the information provided by the status LED and the radio display. Your radio may also have been programmed so that whenever you press a key, the radio beeps to indicate whether or not the action is permitted:

Permitted: Short, medium-pitched beep. Not permitted: Long, low-pitched beep. Note: Audible tones may have been disabled when your radio was programmed, and a function key assigned to turn audible tones on and off. Getting started 25 Navigating the radio menus Your radio has a number of menus available, each containing lists or submenus. The table below summarizes the options that can be accessed through the main menu. The menus available on your radio will depend on the way it was programmed. Note: The menu text on your radio display may differ from that described in this section. Menu text can be customized when the radio is programmed. Display Operation SELECT CHANNEL Change channels using the keypad SELECT BANK Change channel banks using the keypad SEND SELCALL Select a status message for a Selcall call SEND DTMF Make a call using the telephone network ALPHA SYMBOLS Perform single or multiple tasks with a single keypress SEND SDM Enter and send a text message USER SETTINGS Personalise settings for a range of features ALERT SETTINGS Disable or adjust the level of warning beeps and tones DISPLAY SETTINGS Turn night operation on/off, adjust the contrast display or turn the received signal strength indicator on/off 26 Getting started Using the main menu To enter menu mode and access the main menu:

Long press the menu key Press the right arrow key The radio displays MENU in the top right of screen, together with the last selected menu or submenu item:

; or

. MENU SELECT CHANNEL Use the arrow keys to move through the list of menus. Note: Press and hold the left and right arrow keys to scroll through the menu options quickly. When the menu you want appears, short press the menu key to open the menu you have chosen:

MENU CAR 1 To exit a menu or submenu option, press the clear key To exit menu mode, long press the menu key

. Changing settings To toggle between available settings (such as high and low, or on and off), short press the menu key

. Accessing frequently used menus The top function key may be programmed to provide a shortcut to up to three menu options. In this case, the top function key will not have a short and long press option. To access menu options using the top function key, Press the top function key. Press once to access the last selected option, and press again for the next option, moving in a continuous loop. Getting started 27 Basic operation This section covers:

turning the radio on and off entering your personal identification number adjusting the volume about the channels and channel banks understanding how the radio displays channels making a call receiving a call scanning for channel activity hearing all activity on a channel checking that a channel is clear. Turning the radio on and off Rotate the power/volume control switch clockwise to turn the radio on. Rotate the switch counterclockwise to turn the radio off. Note: The radio may not turn on if your battery is very low. Entering your personal identification number ENTER CODE Note: This feature is only available for radios with an alphanumeric keypad. You may need to enter a personal identification number (PIN) before you can use your radio. If the message ENTER CODE appears, enter your assigned PIN and press the enter key Once you have entered your PIN correctly, the radio sounds two short beeps and normal operation is now possible. If you do not know your PIN or you receive a WRONG PIN message, consult your radio provider or system administrator. 28 Basic operation Adjusting the volume Once the radio is on, rotate the power/volume control clock-

wise to increase volume. To decrease volume, rotate the control counter-clockwise. Turning the power/volume control also adjusts the level of the audible tones. About the channels and channel banks In order to make and receive calls, you first need to select a channel. The procedure for selecting a channel varies depending on how your radio has been programmed. Selecting a channel Each position on the channel selector denotes a channel or group of channels (scan group). To select channels or groups 1 to 16:

Turn the channel selector to the channel or group you want. Using the menu to select a channel For channels or groups other than 1 to 16:

1 Long press the menu key to enter menu mode (skip to step 4 if the radio is already in channel mode). 2 Scroll through the main menu options using the arrow keys until SELECT CHANNEL is displayed. 3 Short press the menu key to enter CHAN mode. 4 Scroll through the channels to select the one you want. OR Key in the desired channel number using the keypad, then short press the menu key. A low warning beep will sound if the keyed number is not a valid channel (radios with an alphanumeric keypad only). 5 Long press the menu key to exit CHAN, if channel mode is not the default mode. Basic operation 29 Selecting a channel bank Channel banking is an optional feature that allows easy access to large numbers of channels by grouping them into banks. This feature will be of benefit if you regularly access a large number of channels, or frequently change repeaters. If your radio is programmed for channel banking, each position on the channel selector denotes a channel bank. To select channel banks 1 to 16:

Turn the channel selector to the channel bank you want. Using the menu to select a channel bank For channel banks other than 1 to 16:

1 Long press the menu key 2 Scroll through the main menu options to find SELECT to enter menu mode. BANK using the arrow keys

. 3 Short press the menu key to enter BANK mode. 4 Scroll through the available channel banks using the arrow keys, then short press the menu key to confirm a selection. OR Key in the desired channel bank number using the keypad, then short press the menu key to confirm a selec-

tion. A low warning beep will sound if the keyed number is not a valid channel bank (radios with an alphanumeric keypad only). 5 Long press the menu key to exit menu mode. You will not be able to exit the bank mode until a valid channel bank has been selected. 30 Basic operation Understanding how the radio displays channels The number of channels in each bank differs according to the radios configuration:

Configuration Number of channels per bank channel selector selects channels channel selector selects channel banks Up to 16 channels in each bank Up to 32 channels in each bank When a new channel or channel bank is selected, the radios channel will change to the channel number specified within the newly selected bank, and the channel name or number will appear in the display. Note: The channel bank number does not appear in the display only the selected channel. Basic operation 31 Making a call To make a call:

1 Select the desired channel as described in Selecting a channel on page 29, or Selecting a channel bank on page 30. 2 Check that the channel is clear. If the busy symbol appears in the display and the status LED is glowing green, the channel is busy and you may not be able to make your call. 3 Once the channel is clear, hold the radio so that the microphone is about 2.5cm (one inch) from your mouth. 4 Press the PTT key to transmit. 5 Speak clearly into the microphone, identifying yourself and the party you are calling using the call signs you have been assigned. While you are transmitting, the LED glows red and the transmit symbol appears in the display:

CHAN CAR 2 6 Release the PTT key when you have finished talking. appears in the display and the Making a call while the channel is busy When the busy symbol status LED glows green, there is activity on the channel, even though you may not be able to hear it. If you try to transmit when the radio is busy, a low-pitched warning beep sounds. Activate the monitor function to listen to channel activity. SeeChecking that a channel is clear on page 37. 32 Basic operation Limiting call time Your radio may limit the amount of time you can talk

(transmit) continuously. This is known as the transmit timer or time-out timer and allows other radio users to make calls on that channel. When the transmit timer is about to expire, your radio gives three medium-pitched beeps. Finish your conversation as soon as possible and release the PTT. For a short time, your radio may prevent you from making a call. Receiving a Call Your radio remains quiet until there is valid activity on the channel your radio is currently on. To receive a call:

Select the desired channel as described in Selecting a channel on page 29, or Selecting a channel bank on page 30. To respond to a call:

Press the PTT key and talk. Basic operation 33 Scanning for channel activity A series of channels can be grouped together so that the radio can scan through them looking for activity automatically. Scan groups are selected in the same way as channels. Scan group channels can be set up to scan in three different ways. They can scan for:

Busy channels. Priority channels. The strongest signal (vote). When the radio is scanning for activity the LED glows amber and the group name and scanning displayed, as shown below:

symbol will be CHANGRO UP2 Scanning for a busy channel In this setup, the radio looks for any activity on the channels within the scan group. When valid activity is detected the scanning icon flashes, and the radio will stop on that channel. Scanning resumes when the channel is no longer busy or the signalling is no longer valid. Scanning priority channels One or two priority channels may also have been programmed. These channels are scanned more often than other channels, and are scanned periodically when a non-

priority or lower priority channel is busy. 34 Basic operation Scanning for the strongest signal (voting) With this type of scanning the scan groups member channels carry the same traffic, and the radio searches for the channel with the strongest signal. Background scanning (Flexiscan) The Flexiscan scanning feature allows you to communicate on a selected channel, while a group of channels is scanned for valid activity in the background. A Flexiscan scan group can contain up to 15 member channels. To activate Flexiscan:

Press the assigned function key. Your radio may be programmed so that Flexiscan is turned off when the PTT key is released after making a call when Flexiscan is active. Deleting a channel from a scan group

(nuisance delete) If a channel is busy for a long time and you do not wish to hear the conversation, you can temporarily delete it from the scan group if one of the function key settings is programmed for nuisance delete. To temporarily delete a channel from a scan group:

Press the assigned function key. When the scan group is next selected, the deleted channel is again part of the scan group. Basic operation 35 Hearing all activity on a channel Squelch override allows you to hear all activity on a channel no matter how faint or noisy. This setting is useful when a caller is very hard to hear. To turn squelch override on and off:

Press the assigned function key. OR 1 Long press the menu key to enter menu mode (if the radio displays a submenu option, press the clear key to enter the main menu). 2 Scroll through the main menu options using the arrow keys until USER SETTINGS is displayed. 3 Scroll through the user setting menu options until SQ OVRD is displayed (the radio will display OFF or ON as the current setting). 4 Short press the menu key to turn squelch override on and off. 5 Long press the menu key menu to exit menu mode. Note: Squelch override cannot be activated when a scan group is selected, and is automatically turned off when you change to a scan group channel. 36 Basic operation Checking that a channel is clear Your radio is capable of segregating individuals or groups of users by means of audible or subaudible tones (known as signalling). This means that in normal operation you may not be able to hear all calls being transmitted on a channel. However, your radio may be programmed with the monitor function which, when activated, allows you to hear all activity on a channel. This is useful if you want to check whether a channel is clear before making a call. Note: The monitor function may not have been programmed to override all signalling. Using the menu To activate or deactivate the monitor function:

1 Long press the menu key radio displays a submenu option, press the clear key enter the main menu). to enter menu mode (if the to 2 Scroll through the main menu options to find USER SETTINGS, and short press the menu key. 3 Scroll to find MONITOR (the radio will display OFF or ON as the current setting). 4 Short press the menu key to turn monitor on and off. 5 Long press the menu key to exit menu mode. When the Monitor is on, the Monitor symbol the display. appears in Basic operation 37 Making and receiving different types of calls The type of calls available to your radio depends on the way in which it is programmed. This section covers:

making an individual or group call resending calls automatically receiving an individual or group call informing other radio users of your status calling a telephone or a remote device making an emergency call activating the automated emergency call feature sending and receiving text messages. Making an individual or group call You can use your radio to make calls to an individual or a specific group using Selcall (selective calling). There are two ways to make an individual or group call:

Using a preset call. Dialling a call. Making a preset individual or group call Two preset individual or group calls can be assigned to each channel that has Selcall. A preset call may be assigned to a function key. To make a preset call:

1 Change to the desired channel. 2 Press the assigned function key. 38 Making and receiving different types of calls One-touch preset calls A single one-touch call may also be assigned to one of the function keys. To make a one-touch preset call, press the assigned function key. Dialling individual or group calls Note: This feature is only available for radios with an alphanumeric keypad. To call a group or individual using dialling:

1 Select a channel that has Selcall programmed. 2 Long press the menu key to enter menu mode (if the radio displays a submenu option, short press the clear key to enter the main menu). 3 Scroll through the main menu options using the arrow keys until SEND SELCALL is displayed. 4 Short press the menu key to enter DIAL SELCALL, and again to enter CALL mode. The last number dialled is displayed. 5 Short press the menu key to call the last number dialled. OR Dial the desired number using the keypad (press the clear key to delete a character; press and hold to delete a series of characters), then short press the menu key to send. 6 Long press the menu key to exit menu mode. Receiving an acknowledgement When you call another radio, it may automatically generate a tone sequence, beep or message to let you know that the radio you have called is on and able to receive. Making and receiving different types of calls 39 Resending calls automatically Your radio may have been programmed to resend individual and group calls when they are not answered. Your radio has two automatic callback features:

Deferred calling. No acknowledgement retries. Deferred calling When you attempt to make a call on a channel that is busy, the radio can store and send the call once the channel is free. The radio will give a low-pitched beep if the channel is busy, and will then give two long, medium-pitched beeps at regular intervals until the channel is free, and the call can be resent. To cancel a deferred call:

Press any key. No acknowledgement retries When you send a call and there is no reply, NO ACKNOWLEDGE will be displayed, and the call will be resent up to 15 times. To cancel a call that is being resent:

Press any key. 40 Making and receiving different types of calls Receiving an individual or group call When a call is received that contains your radios identity, CALL will flash in the display and the radio gives a ringing tone. To accept a call:

Press the PTT key and begin speaking. If the call is a group call, there is usually no need to respond. The callers identity and status may also be displayed

(top right-hand corner):

CALL CAR 1 ON SITE callers identity callers status The callers identity can be a name or a number, depending on how your radio was programmed. The callers status is displayed underneath the callers identity. It can also be a name or number. Responding to missed calls Your radio may be programmed with immediate callback, to help you manage missed individual and group calls. Using immediate callback When you miss a call the LED will flash amber at fast flash rate, the display will flash CALL, and the callers identity and status may be displayed. The immediate callback feature can only be used when the callers identity is displayed. To call back the missed caller:

Short press the menu key

. Making and receiving different types of calls 41 Informing other radio users of your status You can inform other radio users of your current status by sending them a status update, for example, On site. You may be able to attach a status update to an individual or group call. About status messages A status message contains information about your current activity or location, which is sent to the called radio. Status messages are defined when your radio is programmed. Each message is assigned a number from 0 to 99, and an 8-

character name (for example, AT LUNCH or AT HOME). Your radio may be programmed to automatically send a status message when you send a selcall, or you may be able to assign a status message. Assigning a status message To assign a status message to a call:

1 Long press the menu key to enter menu mode (if the radio displays a submenu option, press the clear key to enter the main menu). 2 Scroll through the main menu options using the arrow keys until SEND SELCALL is displayed. 3 Short press the menu key to enter the Selcall submenu and scroll using the arrow keys until SELECT STATUS is displayed. 4 Select the desired status message from the available list using the arrow keys

. OR Enter a number from 0 to 99 using the keypad. 5 Long press the menu key to confirm your choice and exit. When you next make a Selcall call, a status message will be attached. 42 Making and receiving different types of calls Calling a telephone or a remote device You can call a telephone or send control codes to a remote device using a feature called DTMF (the tone-based system used by the world telephone network). There are two ways to make a DTMF call:

Using a preset call. Dialling a number. Making a preset DTMF call A preset DTMF call may be assigned to one of the function keys. To make a call:

1 Select the channel the DTMF call is assigned to. 2 Press the assigned function key. Different preset calls may be available on different channels. One-touch preset calls A single one-touch call may also be assigned to one of the function keys. To make a one-touch preset call:

Press the assigned function key. Dialling a DTMF call Note: This feature is only available for radios with an alphanumeric keypad. DTMF call strings can use numbers 0 to 9, letters A to D, and the keys. and Making and receiving different types of calls 43 Making an emergency call Activate emergency mode by using the function key programmed for emergency mode. Note: The emergency function key may be programmed for either a short key press or long key press. 1 Press the emergency function key and an emergency call is sent to your dispatcher, or some other predetermined location. The radio then enters emergency mode. While emergency mode is active, your radio may cycle between receive and transmit, so that your dispatcher can hear any activity near the radio. Alternatively, your radio may appear to turn off but will actually remain in emergency mode. 2 Reset the radio to normal operation at any time by turning the radio off and then on. Alternatively, emergency mode may be programmed to end after a fixed period of time, or your dispatcher may reset your radio to normal operation. Using a double key press To avoid accidental use of the emergency function, the emergency call may have been programmed with a double keypress activation option. The double keypress activation option will have been programmed to be used with either a short or long press. To make an emergency call using a double short press:

Short press the assigned function key twice within three seconds. To make an emergency call using a double long press:

Long press the assigned function key twice within five seconds. 44 Making and receiving different types of calls Activating the automated emergency call feature Your radio has an automated emergency feature called lone worker. Lone worker enables an emergency call to be sent if you become incapacitated while working alone. The lone worker feature works by monitoring your activity. If no key press is detected within a specified period, a warning tone will sound (also for a specified period), after which an emergency call will be made. To turn the lone worker feature on and off:

Press the assigned function key. To stop an emergency call from being sent (once the warning tone has been activated):

Press any key. Note: The time between when a key is pressed and the warning tone is activated, and the duration of the warning tone before an emergency call is made, vary depending on how your radio was programmed. Making and receiving different types of calls 45 Sending and receiving text messages Your radio may be able to send and receive text messages. Reading text messages When your radio receives a message, SDM (short data message) flashes in the lower left-hand corner of the display and the radio gives three short, medium-pitched beeps. To read a message, long press the menu key

. The message appears across both rows of the display. To scroll through the message, use the arrow keys

. To display a message from the start, hold down the PTT key and press the left arrow key

. To display a message from the end, hold down PTT and press the right arrow key

. Exiting message mode When you have finished reading a message:

Long press the menu key OR Press the clear key to exit. to delete the message (the radio reverts to the mode it was in before you viewed the message). Sending a text message Note: This feature is only available for radios with an alphanumeric keypad. To send a message:

1 Long press the menu key radio displays a submenu option, press the clear key enter the main menu). to enter menu mode (if the to 2 Scroll through the main menu options using the arrow until SEND SDM is displayed, then short press keys the menu key to display ENTER SDM. 46 Making and receiving different types of calls 3 Enter a new message using the keypad (see Entering a message on page 47) OR Press an arrow key to begin editing an existing message, then proceed in the same way as for entering a new message. 4 Short press the menu key. The message, ENTER ID will be displayed, along with the receivers identity for the last SDM transmission. 5 Short press the menu key again to send the message using the existing ID. OR Enter a new ID using the keypad if you are calling a differ-

ent radio (the receivers identity must be eight characters long), then short press the menu key to send. Note: Once the message has been sent, the radio will return to the message entry mode in preparation for sending another message. 6 Long press the menu key to exit menu mode. Entering a message A text messages can contain up to 32 characters. See Using the keypad to enter text on page 21. Making and receiving different types of calls 47 Changing your radios settings Your radios audible indicators, radio functions and display settings can be customized to meet your requirements in the Display Settings, User Settings and Alert Settings menus. This section covers:

changing display settings (display settings menu) changing operational settings (user settings menu) changing audible tone settings (alert settings menu). Changing display settings (Display Settings menu) Note: Some display features may not be available or able to be modified on your radio. Display settings are changed in the display settings menu. Individual items in the display settings menu may be assigned to a function key. To access the display settings menu:

1 Long press the menu key to enter menu mode (if the to radio displays a submenu option, press the clear key enter the main menu). 2 Scroll through the main menu options using the arrow keys until DISPLAY SETTINGS is displayed. Activating Backlighting (Night Operation) When backlighting is turned on, the display and keypad will light up for a few seconds when a key is pressed, a call is received or the channel is turned. To turn backlighting on and off:

Press the assigned function key. OR 1 Enter the display settings menu as described at the beginning of this section. 48 Changing your radios settings 2 Short press the menu key

, then scroll through the available menu options until NIGHT is displayed. 3 Short press the menu key to turn backlighting on and off. 4 Long press the menu key to exit menu mode. Adjusting contrast If the radios display is too light or too dark, you can adjust the LCD contrast using the contrast adjustment function. The contrast can be adjusted using a function key or the menu. After making the adjustment, the radio will automatically return to its previous mode of operation after a few seconds of inactivity. To adjust the display contrast:

Press the assigned function key. The message CONTRAST ADJUSTMENT is displayed. Use the arrow keys adjust the contrast to the desired level. to OR 1 Enter the display settings menu as described at the beginning of this section. 2 Short press the menu key

, then scroll through the available menu options until ADJUST CONTRAST is displayed. 3 Use the arrow keys to adjust the contrast to the desired level. 4 Long press the menu key to exit menu mode. Resetting contrast to the default setting Your radio may be programmed so that you can reset the contrast to the factorys default setting using function key 2. To reset the contrast to the radios default setting:

Press and hold function key 2 while turning the radio off then on again. Changing your radios settings 49 Displaying the received signal strength indicator (RSSI) When this option is turned on, the strength of the received signal is displayed in the lower left-hand corner of the menu display To turn RSSI on and off:

1 Enter the display settings menu as described at the

. beginning of this section. 2 Short press the menu key

, then scroll through the available menu options until RSSI is displayed. 3 Short press the menu key to turn RSSI ON and OFF. 4 Long press the menu key to exit menu mode. Changing operational settings (User Settings menu) Note: Some operation features may not be available or able to be modified on your radio. Operational settings are changed in the user settings menu. Individual items in the user settings menu may be assigned to a function key. To access the user settings menu:

1 Long press the menu key radio displays a submenu option, press the clear key enter the main menu). to enter menu mode (if the to 2 Scroll through the main menu options using the arrow keys until USER SETTINGS is displayed. For information on modifying squelch or monitor settings, see Improving Your Radios Reception (Squelch) on page 36 and Checking That a Channel Is Clear (Monitor) on page 37. Low power transmit If you are using your radio in conditions where signal strength is high, you can extend the shift life of your battery 50 Changing your radios settings by transmitting at low power. While low power transmit is active, transmissions are made at low power rather than at the preset power level. Turning low power transmit on and off While low power transmit mode is active, the low power transmit icon To turn low power transmit on and off:

Press the assigned function key. OR 1 Enter the user settings menu as described at the is displayed in the icon bar. beginning of this section. 2 Short press the menu key, then scroll through the available menu options until LOW PWR is displayed. 3 Short press the menu key to turn low power on and off. 4 Long press the menu key to exit menu mode. Note: Some channels may have been programmed to always transmit at low power. Economy mode Economy mode can be used when there is little or no activity on the radio. When in economy mode, the radio cycles between the receive state and a stand-by state, once there has been no activity for a preset period. Receiving or sending a call returns the radio to the fully active state. To turn economy mode on and off:

Press the assigned function key. OR 1 Enter the user settings menu as described at the beginning of this section. 2 Short press the menu key

, then scroll through the available menu options until ECONOMY is displayed. Changing your radios settings 51 3 Short press the menu key to turn economy mode on and off. 4 Long press the menu key to exit menu mode. Locking the keypad keys and the PTT key The keypad lock and PTT lock prevents you from pressing a key accidentally. Which keypad keys are locked depends on how your radio was programmed, but the clear key can never be locked. Locking the keypad keys To activate or deactivate the keypad lock:

Press the assigned function key. OR 1 Enter the user settings menu as described at the beginning of this section. 2 Short press the menu key

, then scroll through the available menu options until KEYLOCK is displayed. 3 The current status (LOCKED or UNLOCKED) is displayed underneath. 4 Short press the menu key to lock and unlock the keypad. The keypad lock can also be deactivated by a long press the clear key. 5 Long press the menu key to exit menu mode. If a locked key is pressed, the radio gives a long, low-pitched beep and displays the message KEYPAD LOCKED. Locking the PTT key To activate or deactivate PTT lock:

Press the assigned function key. OR 1 Enter the user settings menu as described at the beginning of this section. 52 Changing your radios settings 2 Short press the menu key

, then scroll through the available menu options until PTTLOCK is displayed. 3 The current status (LOCKED or UNLOCKED) is displayed underneath. 4 Short press the menu key to lock and unlock the PTT key. 5 Long press the menu key to exit menu mode. Answering a call If a call is received while the keypad is locked, press any key to answer. Choosing a DTMF Dialling Mode Note: This setting applies to TP8120 radios only. DTMF dialling has two modes: normal and buffered:

Normal: Each character in DTMF string is transmitted as the key is pressed. Buffered: The DTMF string is transmitted after all the characters in the string have been entered. To select normal or buffered dialling:

1 Enter the user settings menu as described at the beginning of this section. 2 Short press the menu key

, then scroll through the available menu options until DTMF is displayed. The current status (NORMAL or UBUFFERED) is displayed underneath. 3 Short press the menu key to select normal or buffered dialling. 4 Long press the menu key to exit menu mode. Bypassing Repeater Stations (Communicating Directly with Other Radios) If you are out of range of a repeater you can communicate directly with another radio by using a feature called repeater talkaround. Changing your radios settings 53 To activate repeater talkaround:

Press the assigned function key. To deactivate repeater talkaround:

Press the function key again or change to another channel. Note: Repeater talkaround is not accessible through the menu. Changing Audible Tone Settings

(Alert Settings Menu) Note: Some or all audible tone features may not be availa-

ble or able to be modified on your radio. Key tone settings can be modified using the alert settings menu. Audible tones can be modified using the alert settings menu or a function key (if assigned). To access the alert settings menu:

1 Long press the menu key to enter menu mode (if the to radio displays a submenu option, press the clear key enter the main menu). 2 Scroll through the main menu options using the arrow keys until ALERT SETTINGS is displayed. About Audible Tones Your radio has two features for controlling which audible tones you hear:

Key tones: This feature controls the tones you hear when you press a function key, or a key on the keypad. Key tones can be turned on and off. Audible tones: This feature provides overall control for all audible tones, including key tones, receive call tones, warning tones and so on. Audible tones can be turned on and off. If audible tones is turned off, key tones will also be off. 54 Changing your radios settings Turning Key Tones On and Off To turn keypress tones on and off:

1 Enter the alert settings menu as described at the beginning of this section. 2 Short press the menu key

, then scroll through the available menu options until KEYTONES is displayed. 3 Short press the menu key to select on or off. 4 Long press the menu key to exit menu mode. Disabling Audible Tones Note: Audible tones may not be available or able to be modified on your radio. Audible tones can be turned on and off using a function key

(if assigned). Turning Audible Tones On and Off To turn audible tones on and off:

Press the assigned function key. OR 1 Enter the user settings menu as described at the beginning of this section. 2 Short press the menu key

, then scroll through the available menu options until TONES is displayed. 3 Short press the menu key to turn audible tones on and off. 4 Long press the menu key to exit menu mode. Adjusting the Level of Audible Tones Audible tones have two settings: high and low. To change between the high and low setting:

1 Enter the user settings menu as described at the beginning of this section. Changing your radios settings 55 2 Short press the menu key

, then scroll through the available menu options until LEVEL is displayed. The current status (HIGH or LOW) is displayed underneath. 3 Short press the menu key to select high or low. 4 Long press the menu key to exit menu mode. 56 Changing your radios settings Charging and caring for batteries This section describes how to charge your Tait radio battery as well as care for it, to ensure safe operation, maximum performance and prolonged battery life. Warning: Your battery is designed and manufactured to the highest standard. If you are using a Lithium-ion battery, special care must be taken to avoid personal injury or prop-

erty damage. For your safety, follow the instructions included with your Tait charger and battery. This section covers:

radio low battery warning removing the battery before changing the battery charging the battery storing batteries disposing of batteries. Radio low battery warning When the battery is almost empty, your radio warns you in the following ways:

The battery indicator on the radio display flashes The LED indicator slowly flashes red A low-pitched beep sounds. You should recharge or replace the battery as soon as possible. When the battery is completely empty, the radio emits a long, low-pitched beep and then stops operating. Turn off the radio immediately

. Charging and caring for batteries 57 Removing the battery See also Attaching the battery on page 17. To remove the battery from the radio, so that the battery can be charged or replaced:

1 Squeeze and quickly release both battery catches to release the catch mechanism. Note: Dont push down on the battery; allow the catch mechanism to release the battery from the radio. 2 Remove the battery from the radio. Before changing the battery Before you begin to charge your battery, the battery temperature must be close to the room temperature in which the battery is to be charged. Note: Charging starts only when the battery pack is between 5C (41F) and 40C (104F). 104F 40C 5C 41F Charging the battery Note: The radio must be turned off if placed in the charger with the battery. turn off your radio while charging 58 Charging and caring for batteries 1 Connect the charger to the correct Tait power adaptor, and power on the power adaptor. The three charger LEDs all light up for about two seconds. 2 Put the battery in the charger and check that it is correctly seated. The red LED charging. When the green LED charged. lights up, to indicate that the battery is lights up, the battery is fully lights up, there is a fault. Switch Note: If the amber LED off the power adaptor and refer to Troubleshooting your charger on page 62. 3 Remove the battery when you are ready. The charger will not overcharge the battery. Nor will removing the battery early damage it. Storing batteries When not in use for a month or more, batteries should be stored correctly to prolong their life. Storing a Li-ion battery To prepare a Li-ion battery for storage:

Discharge the battery by allowing the radio to turn itself off. (The radio display flashes long, low-pitched beep and then stops operating.)

, the radio emits a Remove the battery from the radio. Store the battery in a cold, dry place. Charging and caring for batteries 59 Storing a nickel metal hydride (NiMH) battery To prepare an NiMH battery for storage:

Remove the battery from the radio. The battery can be either charged or discharged. Store the battery in a cold, dry place. Using batteries after storage Batteries that have been stored must be charged before being used. See Charging the battery on page 58. NiMH batteries that have been stored for longer than three months may not last an entire shift. This is normal. If stored properly, the batterys optimal capacity should be restored after two or three shifts (charge/discharge cycles). Disposing of batteries Batteries should be disposed of properly. Discharge Li-ion batteries before disposing of them. When disposing of a battery, be sure to do so in an environmentally sensitive manner. If disposed of in landfills, batteries can be very hazardous to the environment. Please contact your radio provider for information on recycling programs in your area. 60 Charging and caring for batteries Troubleshooting If you are experiencing difficulty operating your radio, you may find the following sections helpful. Consult your radio provider for assistance, if necessary. This section covers:

when your radio wont turn on removing a belt clip checking the version of your radio troubleshooting your charger general care cleaning the radio. When your radio wont turn on If the red LED on the radio does not light up when the radio is turned on, it is probable that power is not reaching the radio. Check the following:

Is the battery firmly attached to the radio?

Is the battery sufficiently charged?

Is the battery charger working properly?

If all appears to be in order, but your radio still fails to operate properly, contact your radio provider for further assistance. Removing a belt clip The belt clip has been designed to prevent accidental removal, but you can take it off, if required. To remove a belt clip from a battery:

1 Insert a flat screwdriver blade or similar flat object under the lip of the release lock (that is, between it and the metal slider). Troubleshooting 61 2 Lift the release lock up (away from the metal slider) and hold it in position. 3 Slide the belt clip out. Checking the version of your radio Your radio provider may ask you for the hardware and firmware version of your radio, for troubleshooting purposes. Troubleshooting your charger Charger LEDs do not light up Possible reason(s) and solution(s) include:

The power adaptor is not connected, or not turned on. Remove power adaptor plug and refit. The battery has not been detected. Check that the battery contacts are clean and battery is seated correctly. The charger contacts are stuck. Check that the charger contacts move freely. Charger amber LED lights up Possible reason(s) and solution(s) include:

Charging is suspended because the battery is either too hot or too cold. Charging will begin when the tempera-

ture of the battery is between 5C (41F) and 40C

(104F). The battery is not compatible with the charger. Check that the label on the battery charger (Li-ion or NiMH) matches the label on the battery. There is incorrect voltage to the charger. Check you are using the correct power adaptor and it is not faulty. The battery may be faulty. If problem persists consult your radio provider for advice. 62 Troubleshooting General care Your radio requires no regular maintenance other than ensuring that the battery has sufficient charge and that no damage has occurred to the antenna or the battery. To prevent permanent damage to the radio case, do not allow the radio to come into contact with detergents, alcohol, aerosol sprays, or petroleum-based products. For battery care, see Charging and caring for batteries on page 57. Cleaning the radio If you need to clean the radio case, use a cloth dampened with clean water. Do not immerse the radio in fluids. Troubleshooting 63 Function key options Note: Some functions are not permitted in some countries. The features below can be assigned to the function keys when the radio is programmed. If you do not know which features have been programmed for your radio, see your system administrator. For information on function keys, see About the function keys on page 19. Common functions Function Audible Tones Backlighting Description Turns audible tones on and off. Turns backlighting on. Backlighting will turn off after a programmed period. Channels DTMF Preset Sends the DTMF preset call assigned to the current channel. Allows you to adjust the display contrast. Disables the monitor facility, if it is active. Turns economy mode on and off. Activates DTMF emergency mode. Activates Selcall emergency mode. Locks the keypad so the keys cannot be activated accidentally; a long press of the clear key deacti-

vates the keypad lock. What keys are locked depends on how the radio was programmed;

however, the clear key cannot be locked. Monitors radio activity so that an emergency call can be sent if a worker becomes incapacitated. Contrast Adjustment Disable Monitor Economy Mode Emergency DTMF Emergency Selcall Keypad Lock Lone Worker 64 Function key options Function Low Power Transmit Night Use Nuisance Delete One Touch Call Preset Selcall Program Flexiscan Description Changes the transmit power from medium or high to low. Pressing the key again returns the transmit power to the programmed level. Channels can also be programmed for low power. Turns night operation mode on and off. Temporarily deletes the current channel from the scanning regime. Sends a preset Selcall call or DTMF call, or selects a channel. Sends the preset Selcall call assigned to the current channel. Allows you to enter Flexiscan programming mode. You can now change group membership and change priority channels. Repeater Access Tone Sends the repeater access tone to key up the trans-

Repeater Talkaround Squelch Override Toggle Flexiscan Toggle Monitor mitter. Allows you to bypass normal repeater operation and communicate directly with another radio. Pressing the key again or change to another channel to turn off repeater talkaround. Turns squelch override on and off, so the user can hear all activity on a channel, including noise. The radio may be programmed so that a long press of the clear key turns squelch override on and off. Turns Flexiscan on and off. Your radio may be programmed so that Flexiscan is turned off when the PTT key is released after making a call when Flexiscan is active. Toggles monitor on and off, so that the user can hear all traffic on a channel. A short press the clear key may also toggle monitor. Function key options 65 Tait general software licence agreement This legal document is an Agreement between you (the Licensee) and Tait Electronics Limited (Tait). By using any of the Software or Firmware items prior-installed in the related Tait product, included on CD or downloaded from the Tait website, (hereinafter referred to as the Software or Firmware) you agree to be bound by the terms of this Agreement. If you do not agree to the terms of this Agree-

ment, do not install and use any of the Soft-

ware or Firmware. If you install and use any of the Software or Firmware that will be deemed to be acceptance of the terms of this licence agreement. The terms of this Agreement shall apply subject only to any express written terms of agreement to the contrary between Tait and the Licensee. Licence TAIT GRANTS TO YOU AS LICENSEE THE NON-EXCLU-

SIVE RIGHT TO USE THE SOFTWARE OR FIRMWARE ON A SINGLE MACHINE PROVIDED YOU MAY ONLY:

1 COPY THE SOFTWARE OR FIRMWARE INTO ANY MACHINE READABLE OR PRINTED FORM FOR BACKUP PURPOSES IN SUPPORT OF YOUR USE OF THE PROGRAM ON THE SINGLE MACHINE (CERTAIN PROGRAMS, HOWEVER, MAY INCLUDE MECHANISMS TO LIMIT OR INHIBIT COPYING, THEY ARE MARKED COPY PROTECTED), PROVIDED THE COPYRIGHT NOTICE MUST BE REPRODUCED AND INCLUDED ON ANY SUCH COPY OF THE SOFTWARE OR FIRMWARE;

AND / OR 2 MERGE IT INTO ANOTHER PROGRAM FOR YOUR USE ON THE SINGLE MACHINE (ANY PORTION OF ANY SOFTWARE OR FIRMWARE MERGED INTO ANOTHER PROGRAM WILL CONTINUE TO BE SUBJECT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT). THE LICENSEE MAY NOT DUPLICATE, MODIFY, REVERSE COMPILE OR REVERSE ASSEMBLE ANY SOFTWARE OR FIRMWARE IN WHOLE OR PART. Important Notice THE SOFTWARE OR FIRMWARE MAY CONTAIN OPEN SOURCE SOFTWARE COMPONENTS (OPEN SOURCE COMPONENTS). OPEN SOURCE COMPONENTS ARE EXCLUDED FROM THE TERMS OF THIS AGREEMENT EXCEPT AS EXPRESSLY STATED IN THIS AGREEMENT AND ARE COVERED BY THE TERMS OF THEIR RESPEC-

TIVE LICENCES WHICH MAY EXCLUDE OR LIMIT ANY WARRANTY FROM OR LIABILITY OF THE DEVELOPERS AND/OR COPYRIGHT HOLDERS OF THE OPEN SOURCE COMPONENT FOR THE PERFORMANCE OF THOSE OPEN SOURCE COMPONENTS. YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS OF EACH SUCH LICENCE. FOR MORE INFORMATION SEE:

http://support.taitworld.com/go/opensource Title to Software THIS AGREEMENT DOES NOT CONSTITUTE A CONTRACT OF SALE IN RELATION TO THE SOFTWARE OR FIRMWARE SUPPLIED TO THE LICENSEE. NOT WITH-

STANDING THE LICENSEE MAY OWN THE MAGNETIC OR OTHER PHYSICAL MEDIA ON WHICH THE SOFTWARE OR FIRMWARE WAS ORIGINALLY SUPPLIED, OR HAS SUBSEQUENTLY BEEN RECORDED OR FIXED, IT IS A FUNDAMENTAL TERM OF THIS AGREEMENT THAT AT ALL TIMES TITLE AND OWNERSHIP OF THE SOFTWARE OR FIRMWARE, WHETHER ON THE ORIGINAL MEDIA OR OTHERWISE, SHALL REMAIN VESTED IN TAIT OR THIRD PARTIES WHO HAVE GRANTED LICENCES TO TAIT. Term and Termination THIS LICENCE SHALL BE EFFECTIVE UNTIL TERMINATED IN ACCORDANCE WITH THE PROVISIONS OF THIS AGREEMENT. THE LICENSEE MAY TERMINATE THIS LICENCE AT ANY TIME BY DESTROYING ALL COPIES OF THE SOFTWARE OR FIRMWARE AND ASSOCIATED WRITTEN MATERIALS. THIS LICENCE WILL BE TERMI-

NATED AUTOMATICALLY AND WITHOUT NOTICE FROM TAIT IN THE EVENT THAT THE LICENSEE FAILS TO COMPLY WITH ANY TERM OR CONDITION OF THIS AGREEMENT. THE LICENSEE AGREES TO DESTROY ALL COPIES OF THE SOFTWARE OR FIRMWARE AND ASSO-

CIATED WRITTEN MATERIALS IN THE EVENT OF SUCH TERMINATION. Limited Warranty THE SOFTWARE OR FIRMWARE (INCLUDING OPEN SOURCE COMPONENTS) IS SUPPLIED BY TAIT AND ACCEPTED BY THE LICENSEE AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT BEING LIMITED TO ANY IMPLIED WARRANTIES AS TO MERCHANTABILITY OR 66 Tait general software licence agreement TERMS HEREOF OR FOR THE ENFORCEMENT OF ANY JUDGEMENT IN RELATION TO A BREACH OF THE TERMS HEREOF IN ANY JURISDICTION TAIT CONSID-

ERS FIT FOR THE PURPOSE OF ENSURING COMPLI-

ANCE WITH THE TERMS HEREOF OR OBTAINING RELIEF FOR BREACH OF THE TERMS HEREOF. No Dealings THE LICENSEE MAY NOT SUBLICENSE, ASSIGN OR TRANSFER THE LICENCE OR THE PROGRAM EXCEPT AS EXPRESSLY PROVIDED IN THIS AGREEMENT. ANY ATTEMPT OTHERWISE TO SUBLICENSE, ASSIGN OR TRANSFER ANY OF THE RIGHTS, DUTIES OR OBLIGA-

TIONS HEREUNDER IS VOID. No Other Terms THE LICENSEE ACKNOWLEDGES THAT IT HAS READ THIS AGREEMENT, UNDERSTANDS IT AND AGREES TO BE BOUND BY ITS TERMS AND CONDITIONS. THE LICENSEE FURTHER AGREES THAT SUBJECT ONLY TO ANY EXPRESS WRITTEN TERMS OF AGREEMENT TO THE CONTRARY BETWEEN TAIT AND THE LICENSEE THIS IS THE COMPLETE AND EXCLUSIVE STATEMENT OF THE AGREEMENT BETWEEN IT AND TAIT IN RELA-

TION TO THE SOFTWARE OR FIRMWARE WHICH SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT, ORAL OR WRITTEN AND ANY OTHER COMMUNICA-

TIONS BETWEEN THE LICENSEE AND TAIT RELATING TO THE SOFTWARE OR FIRMWARE. FITNESS FOR ANY PARTICULAR PURPOSE. THE LICEN-

SEE ACKNOWLEDGES THAT THE SOFTWARE OR FIRMWARE (INCLUDING OPEN SOURCE COMPO-

NENTS) IS USED BY IT IN BUSINESS AND ACCORD-

INGLY TO THE MAXIMUM EXTENT PERMITTED BY LAW NO TERMS OR WARRANTIES WHICH ARE IMPLIED BY LEGISLATION SHALL APPLY TO THIS AGREEMENT. TAIT DOES NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THE SOFTWARE OR FIRMWARE

(INCLUDING OPEN SOURCE COMPONENTS) WILL MEET THE LICENSEES REQUIREMENTS OR THAT THE OPERATION OF THE SOFTWARE OR FIRMWARE

(INCLUDING OPEN SOURCE COMPONENTS) WILL BE UNINTERRUPTED OR ERROR FREE. Exclusion of Liability IN NO CIRCUMSTANCES SHALL TAIT BE UNDER ANY LIABILITY TO THE LICENSEE, OR ANY OTHER PERSON WHATSOEVER, WHETHER IN TORT (INCLUDING NEGLI-

GENCE), CONTRACT (EXCEPT AS EXPRESSLY PROVIDED IN THIS AGREEMENT), EQUITY, UNDER ANY STATUTE, OR OTHERWISE AT LAW FOR ANY LOSSES OR DAMAGES WHETHER GENERAL, SPECIAL, EXEMPLARY, PUNITIVE, DIRECT, INDIRECT OR CONSE-

QUENTIAL ARISING OUT OF OR IN CONNECTION WITH ANY USE OR INABILITY OF USING THE SOFTWARE OR FIRMWARE (INCLUDING OPEN SOURCE COMPONENTS). THE LICENSEES SOLE REMEDY AGAINST TAIT WILL BE LIMITED TO BREACH OF CONTRACT AND TAITS SOLE AND TOTAL LIABILITY FOR ANY SUCH CLAIM SHALL BE LIMITED AT THE OPTION OF TAIT TO THE REPAIR OR REPLACEMENT OF THE SOFTWARE OR FIRMWARE OR THE REFUND OF THE PURCHASE PRICE OF THE SOFTWARE OR FIRMWARE. General THE LICENSEE CONFIRMS THAT IT SHALL COMPLY WITH THE PROVISIONS OF LAW IN RELATION TO THE SOFTWARE OR FIRMWARE. Law and Jurisdiction THIS AGREEMENT SHALL BE SUBJECT TO AND CONSTRUED IN ACCORDANCE WITH NEW ZEALAND LAW AND DISPUTES BETWEEN THE PARTIES CONCERNING THE PROVISIONS HEREOF SHALL BE DETERMINED BY THE NEW ZEALAND COURTS OF LAW. PROVIDED HOWEVER TAIT MAY AT ITS ELEC-

TION BRING PROCEEDINGS FOR BREACH OF THE Tait general software licence agreement 67