submitted | available | document details (if available) | source link |
---|---|---|---|
September 30 2019 | September 30 2019 | 8. User Manual_1.pdf User Acrobat Distiller 11.0 (Windows) |
various | User manual 1 | Users Manual | 574.61 KiB | September 30 2019 |
User Manual Android UHD Hybrid Receiver for IPTV/OTT and multimedia Services UIW4020COG UIW4020TLU UIW4020WOW INTRODUCTION Dear Customer. Congratulations on acquiring your new digital receiver. We hope it will give you complete satisfaction. Please read carefully these instructions before installing your Android Digital UHD Receiver and keep them for future references. Technicolor reserves the right to use the technical data and illustrations which are mentioned in this document or change at any time without notice. The disassembly and reverse engineering are prohibited. Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio and the double-D are trademarks of Dolby Laboratories. HDMI and HDMI High Denition Multimedia Interface terms and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. 2 SAFETY RECOMMENDATIONS REMEMBER SAFETY FIRST Using equipment safely Your receiver has been manufactured to meet European safety standards, but you must take care if you want it to perform properly and safely. Equipment connected to the protective earth of the building installation through the mains connection or through other equipment with a connection to protective earth and to a cable distribution system using coaxial cable, may in some circumstances create re hazard. Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11 or equivalent). It is important that you read this booklet completely, especially the safety instructions below. If you have any doubts about the installation, operation or safety of receiver, please contact your supplier. To avoid the risk of electric shock
equipment. Remember that contact with 100-127 VAC 60Hz mains can be lethal or cause severe electric shock.
ambient temperature of less than 40 degrees Celsius and a maximum humidity level of 75%.
Connecting to the mains supply
3 Ensuring optimum performance
openings regularly. Remote Control Unit
(packed or installed) shall not be exposed to excessive heat such as sunshine the re or the like. Replace the batteries as follows:
Caution
Limiting the Human Body Exposure to the Electromagnetic Fields Under normal use condition the user shall keep at least 20cm distance from the equipement. p Technical specications
Weight (g) for receiver
<0.5W
<8W 570g
155 x 36 x 155 mm
2 x AAA
4.0
standards. However there is no guarantee that interference will not occur in a particular installation. In such a case the user is encouraged to try and correct the interference by one or more of the following measures:
4
the presence of uninsulated dangerous voltage within the product enclosure that may be of sufcient magnitude to constitute a risk of shock to persons.
important operating and maintenance (servicing) instructions in the literature accompanying the product.
compliance with the following conditions: (1) this device must not cause any interference and (2) this device must tolerate any received interference including interference that could have an effect on operation. CAUTION: Any changes or modications made to the equipment and that are not specically approved by the manufacturer deprive the user of all rights concerning the equipment. NOTE:
of these requirements is to offer reasonable protection against damaging interference in a residential
and used in accordance with these instructions, could generate interference which could be damaging to radio communications. Accordingly, there is no guarantee that interference might be generated by a specic installation. If your equipment causes undesirable interference with radio or television reception, you might try turning the equipment off and on again, and attempting to correct it by means of one or several of the following methods:
connected.
internet address : http://www.technicolor.com/ch_regulatory
power of the product:
Radio transmission power for each type of transceiver:
2400-2483.5
2400-2483.5 5150-5725
Alternating current
Responsible Party
5 ENVIRONMENTAL CONSIDERATIONS Environmental information
negative consequences for the environment and human health. Please help us protect the environment in which we live!
are recyclable.
Energy savings you have a role play Learn how you can use and explore ways for using your electronic equipment.
consumption performances. We strongly encourage you to look in the set top box conguration menu how to select the best device conguration in accordance with your personal preference. 6 1. YOUR ANDROID UHD HYBRID IPTV / OTT RECEIVER
1.1. BEFORE YOU START 1.1.1. Receiver and Accessories Your package includes:
Remote control
& batteries Ethernet cable
Caution
1.1.2. You will also need
or a router
7 2. DESCRIPTION
2.1. FRONT PANEL 1 2 1 2
The design of the Front/Rear Panel may be changed without prior notice. 8 2.2. REAR PANEL 1 2 3 4 5 6
1 2 3 4 5 6 Reset.
2.3. RIGHT SIDE PANEL 1 2 1 2
The design of the Front/Rear Panel may be changed without prior notice. 9 2.4. BOTTOM SIDE 1 1
With the following information:
The design of the Front/Rear Panel may be changed without prior notice. 10 2.5. REMOTE CONTROL 21 20 19 18 17 16 15 14 13 12 11 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9
mode.
live channel.
channel. 10 11 12 13
0 to 9 - Alphanumeric keypad. 14 15
previous menu. 16
17 18 19 Access to additional information.
20
application (mandatory to have it in case of an Android certied RCU). 21
Some of above keys are not supported by the User Interface. Please do refer to UI features. 11 3. GET STARTED In this chapter, the basic steps to get you started are described. 3.1. Prepare the remote control 1 2 3. Close the battery compartment. Note
panel and select the desired function.
12 4. CONNECTION
Make sure all the devices are disconnected from the mains before making any connections. HDMI connection - provides best quality UHD picture and high quality audio. 4.1. CONNECTION OPTIONS Connection with your UIW4020
located, visible and accessible position. CAUTION! Before connecting the receiver disconnect ALL devices from the power supply. 4.1.1. Connecting TV
1. Connect the Ethernet cable from the
2HDMI cable
3 Power Adaptor
plug. Connect all devices to main.
4.1.2. Connecting Hi-Fi
Connect the SPDIF cable
audio amplier 13 4.1.3. Connecting HDMI Home theater
Connect the DIGITAL AUDIO with the HDMI cable to your home theater amplier for digital
14 5. PROBLEM RESOLUTIONS
after completing the following troubleshooting, please contact the technical support. Problems Possible cause Solutions Generic Error Message show on TV screen.
No image is displayed on TV screen.
work correctly. No sound.
Remote control does not operate.
Check the volume level and the
maybe can not decode the digital audio format.
a choice of output format may be proposed and in this option, choose
decoder.
the batteries.
remote. 15 6. PRODUCT NOTES
license terms.
http://www.technicolor.com/en/hi/minisites/open-software from time to time.
http://www.technicolor.com/en/hi/minisites/open-software
COPYRIGHT
to any electronic or machine-readable form, in whole or in part, without prior consent in writing from distributor. 2019 All rights reserved.
16
This product uses the FCC Data API but is not endorsed or certified by the FCC