| submitted | available | document details (if available) | source link |
|---|---|---|---|
| various | User manual | Users Manual | 5.96 MiB |
MSP-EXPCC430RFx Experimenter Kit ECCN 5A002A1A User's Guide Literature Number: SLAU460 November 2012 Contents 1 2 3 4 5 6 7 1.1 1.2 2.1 2.2 2.3 2.4 2.5 MSP-EXPCC430RFx Experimenter Kit Overview ...................................................................... 4 Overview .................................................................................................................. 4 Kit Contents .............................................................................................................. 8 Getting Started With the MSP-EXPCC430RFx Experimenter Kit ................................................ 8 Hardware Preparation .................................................................................................. 8 Software Preparation ................................................................................................... 9 MSP-EXPCC430RFx User Experience ............................................................................. 10 MSP-EXPCC430RFx Firmware Applications ...................................................................... 10 CC430 Wireless Network GUI ........................................................................................ 11 MSP-EXPCC430RFx Experimenter Kit Hardware .................................................................... 12 MSP-EXP430F6137Rx Hardware Description ..................................................................... 12 MSP-EXP430F5137Rx Hardware Description ..................................................................... 12 Schematics ............................................................................................................. 13 PCB Layout ............................................................................................................. 17 MSP-EXPCC430RFx Experimenter Kit Firmware .................................................................... 19 Import Project in Code Composer Studio ........................................................................... 19 Open Project in IAR Embedded Workbench ....................................................................... 19 SimpliciTI RF Protocol .............................................................................................. 19 SimpliciTI Configuration for the MSP-EXPCC430RFx User Experience ....................................... 19 5xx/6xx Core Libraries ................................................................................................ 20 MSP-EXPCC430RFx Experimenter Kit Software ..................................................................... 20 Requirements ........................................................................................................... 20 References ....................................................................................................................... 20 Bills of Materials (BOM) ...................................................................................................... 21 4.1 4.2 4.3 4.4 4.5 3.1 3.2 3.3 3.4 5.1 2 Table of Contents Copyright 2012, Texas Instruments Incorporated SLAU460November 2012 Submit Documentation Feedback www.ti.com List of Figures MSP-EXPCC430RFx Experimenter Kit MSP-EXP430F6137Rx Base Board (Front)............................ 5 MSP-EXPCC430RFx Experimenter Kit MSP-EXP430F6137Rx Base Board (Back)............................ 6 MSP-EXPCC430RFx Experimenter Kit MSP-EXP430F5137Rx Satellite Board (Front) ........................ 7 MSP-EXPCC430RFx Experimenter Kit MSP-EXP430F5137Rx Satellite Board (Back) ........................ 7 MSP-EXP430F6137Rx Base Board Hardware........................................................................ 12 MSP-EXP430F5137Rx Satellite Board Hardware .................................................................... 12 MSP-EXP430F6137Rx Base Board Schematic Page 1 ........................................................... 13 MSP-EXP430F6137Rx Base Board Schematic Page 2 ........................................................... 14 MSP-EXP430F6137Rx Base Board Schematic Page 3 ........................................................... 15 MSP-EXP430F5137Rx Satellite Board Schematic.................................................................... 16 MSP-EXP430F6137Rx Base Board Layout ........................................................................... 17 MSP-EXP430F5137Rx Satellite Board Layout ........................................................................ 18 List of Tables MSP-EXP430F6137R9 Base Board (HW-V2.1) BOM................................................................ 21 MSP-EXP430F5137R9T Satellite Board (HW-V2.0) BOM........................................................... 25 MSP-EXP430F6137R4 Base Board (HW-V2.1) BOM................................................................ 26 MSP-EXP430F5137R4T Satellite Board (HW-V2.0) BOM........................................................... 30 1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 SLAU460November 2012 Submit Documentation Feedback Copyright 2012, Texas Instruments Incorporated List of Figures 3 MSP-EXPCC430RFx Experimenter Kit Users Guide User's Guide SLAU460November 2012 1 MSP-EXPCC430RFx Experimenter Kit Overview 1.1 Overview The MSP-EXPCC430RFx Experimenter Kit is the complete sub-GHz development platform for the CC430 devices from the MSP430 family. The kit provides two sub-GHz wireless modules: the MSP-
EXP430F6137Rx Base Board with the CC430F6137, and the MSP-EXP430F5137Rx Satellite Board with the CC430F5137. Out of the box, the two modules enable demonstration of a SimpliciTI wireless sensor network and take full advantage of a highly-integrated LCD and PC connection. Additionally, the kit also enables a complete development and prototyping environment to design a wireless application. MSP430, SimpliciTI are trademarks of Texas Instruments. All other trademarks are the property of their respective owners. 4 MSP-EXPCC430RFx Experimenter Kit Users Guide Copyright 2012, Texas Instruments Incorporated SLAU460November 2012 Submit Documentation Feedback www.ti.com MSP-EXPCC430RFx Experimenter Kit Overview Figure 1. MSP-EXPCC430RFx Experimenter Kit MSP-EXP430F6137Rx Base Board (Front) SLAU460November 2012 Submit Documentation Feedback Copyright 2012, Texas Instruments Incorporated MSP-EXPCC430RFx Experimenter Kit Users Guide 5 MSP-EXPCC430RFx Experimenter Kit Overview www.ti.com Figure 2. MSP-EXPCC430RFx Experimenter Kit MSP-EXP430F6137Rx Base Board (Back) 6 MSP-EXPCC430RFx Experimenter Kit Users Guide Copyright 2012, Texas Instruments Incorporated SLAU460November 2012 Submit Documentation Feedback www.ti.com MSP-EXPCC430RFx Experimenter Kit Overview Figure 3. MSP-EXPCC430RFx Experimenter Kit MSP-EXP430F5137Rx Satellite Board (Front) Figure 4. MSP-EXPCC430RFx Experimenter Kit MSP-EXP430F5137Rx Satellite Board (Back) The MSP-EXPCC430RFx Experimenter Kit is available for purchase from the TI eStore. SLAU460November 2012 Submit Documentation Feedback Copyright 2012, Texas Instruments Incorporated MSP-EXPCC430RFx Experimenter Kit Users Guide 7 Getting Started With the MSP-EXPCC430RFx Experimenter Kit www.ti.com The MSP-EXPCC430RFx Experimenter Kit features the RF System-on-Chip CC430 devices, CC430F6137 with LCD driver and CC430F5137. This combination of devices enables sub-GHz RF communication on the ultra-low-power MCU platform. The CC430 devices allow for high-performance radio with high sensitivity and excellent blocking, while minimizing the number of external components by integrating the solution into a single-chip MCU platform. 1.2 Kit Contents The MSP-EXPCC430RFx Experimenter Kit includes two components:
One MSP-EXP430F6137Rx Based Board with CC430F6137, RF front end with sub-GHz chip antenna and options for wire antenna and SMA connector, 96-segment alphanumeric LCD, on-board integrated debugging and programming emulator, four push buttons, four LEDs, and a light sensor. One MSP-EXP430F5137Rx Satellite Board with CC430F5137, RF front end with sub-GHz chip antenna, one push button, and one LED. The CC430 devices feature an ultralow-power 16-bit microcontroller with an integrated radio core, an optional 96-segment LCD controller, 12-bit ADC, comparator, universal serial interface (supports UART, SPI and I2C), 32KB flash memory, and 4KB RAM memory. 2 Getting Started With the MSP-EXPCC430RFx Experimenter Kit The following sections describe the preparation necessary to run the user experience application demo and to start developing applications with the MSP-EXPCC430RFx Experimenter Kit 2.1 Hardware Preparation The MSP-EXPCC430RF9 (868 MHz or 915 MHz) version of the kit is preprogrammed with firmware operating at the 868-MHz frequency band. To comply with local regulations, ensure that the 915-MHz version of the firmware images are programmed onto both the MSP-EXP430F6137 Base Board and the MSP-EXP430F5137 Satellite Board before using the kits in North America (USA or Canada). Programming of the firmware can be done using the firmware loader or the IAR or CCS software projects included in the MSP-EXPCC430RFx User Experience Software Package (MSP-EXPCC430RFx Software Download). 2.1.1 Program the MSP-EXP430F6137RFx Base Board 1. Set the "Debug (SBW)" switch and the "UART" switch to the "Base Board" position. 2. Set the"SW PWR" (power selector) switch to the "USB" position. 3. Connect the USB cord from the PC to the MSP-EXP430F6137RFx. 4. On the PC, browse to the folder that contains the firmware:
C:\ti\msp430\MSP-EXPCC430_UE_1_00_00_01\bin\firmware 5. Double click on the appropriate .bat file for the version of the firmware that is required (433, 868, or 915 MHz). The MSP430 Flasher tool programs the device with this firmware. 2.1.2 Program the MSP-EXP430F5137RFx Satellite Board 1. Make sure that the MSP-EXP430F5137RFx Satellite Board is connected to the Base Board. 2. Set the "Debug (SBW)" switch and the "UART" switch to the "Satellite" position. 3. Set the"SW PWR" (power selector) switch to the "USB" position. 4. Connect the USB cord from the PC to the MSP-EXP430F6137RFx. 5. On the PC, browse to the folder that contains the firmware:
C:\ti\msp430\MSP-EXPCC430_UE_1_00_00_01\bin\firmware 6. Double click on the appropriate .bat file for the version of the firmware that is required (433, 868, or 915 MHz). The MSP430 Flasher tool programs the device with this firmware. 8 MSP-EXPCC430RFx Experimenter Kit Users Guide Copyright 2012, Texas Instruments Incorporated SLAU460November 2012 Submit Documentation Feedback www.ti.com Getting Started With the MSP-EXPCC430RFx Experimenter Kit 2.1.3 Prepare the MSP-EXPCC430RFx Experimenter Kit for Operation 2.1.3.1 Base Board MSP-EXP430F6137Rx 1. Select the power switch configuration to match the power supply in use (an external DC power supply, 2. 3. batteries, or the USB connector). If the batteries option is selected, insert the two AA batteries provided with the kit into the sockets on the back on the MSP-EXP430F6137Rx base board. Observe the correct polarity (see the markings inside the battery compartment). If the USB power option is selected, connect the board to a PC using the included USB to mini-USB cable. The USB connection also enables the PC GUI functionality. 2.1.3.2 1. Satellite Board MSP-EXP430F5137Rx Insert the two AAA batteries that are provided with the kit into the provided battery pack. Observe the correct polarity (see the markings inside the battery holder). NOTE:
If the board is powered by batteries or through the DC connector, the emulator is not powered and keeps the connected target device in RESET. Therefore, the Debug (SBW) selector must be set to the "Satellite" board for the User Experience software to operate. 2. Connect the included battery pack to the MSP-EXP430F5137Rx via the 3-pin connector CON3. 2.2 Software Preparation The steps described in the following sections are not required for the MSP-EXPCC430RFx Experimenter Kit stand-alone demo. For all other purposes that require PC software interaction, proper installation of the hardware driver and the software is required. To develop applications, it is also necessary to install one of the IDEs shown in the Tools and Software section of the MSP430 landing page www.ti.com/msp430. More information on how to start developing applications on the MSP-EXPCC430RFx platform or with the CC430 RF SoC devices can be found on the www.ti.com/msp-expcc430rfx. All of the MSP-EXPCC430RFx User Experience firmware and software that is described in the following sections is provided in both binary (executable) and source code forms, along with drivers and supporting documentation. An installation package can be downloaded from MSP-EXPCC430RFx Software Download. The same software package link and updates can also be found in the MSP-EXPCC430RFx tool folder, http://www.ti.com/tool/msp-expcc430rfx. When this package is installed, all user experience application demos are stored in the Software folder in the selected installation directory (the default directory is C:\ti\msp430\), and the source code for the projects is installed to the src folder. 2.2.1 USB Driver The USB driver must be installed for the PC to communicate with the MSP-EXP430F6137Rx based board through USB. If this is the first time the MSP-EXP430F6137Rx based board is connected to the PC, install the USB serial COM port driver located at [INSTALL_PATH]\USB_Driver\USB_Driver.exe. NOTE: The USB drivers are integrated into the installer packages for the Code Composer Studio IDE (version 5+) or IAR Embedded Workbench IDE (version 5.20+) and do not require a second installation if one of these IDEs has already been installed. 2.2.2 Software Package Installation Open the MSP-EXPCC430RFx Software Package to start the installation (MSP-EXPCC430RFx Software Download). Accept the license agreement and specify the install path (the default path is C:\ti\msp430). The installer populates the folder with the source code and binaries for the kit's User Experience firmware and the PC GUI, the hardware design files, and the USB driver files. SLAU460November 2012 Submit Documentation Feedback Copyright 2012, Texas Instruments Incorporated MSP-EXPCC430RFx Experimenter Kit Users Guide 9 Getting Started With the MSP-EXPCC430RFx Experimenter Kit 2.3 MSP-EXPCC430RFx User Experience www.ti.com The MSP-EXPCC430RFx User Experience includes two projects:
1. Firmware applications that are pre-loaded on the MSP-EXP430F6137Rx Base Board and the MSP-
EXP430F5137Rx Satellite Board to demonstrate a stand-alone wireless network using the SimpliciTI protocol. 2. When the Base Board is connected to the PC, the CC430 Wireless Network GUI program can be used to enable visualization of the wireless sensor network. 2.4 MSP-EXPCC430RFx Firmware Applications The MSP-EXPCC430RFx User Experience application forms a star network using the SimpliciTI protocol. The Satellite Board acts as the End Device, and the Base Board acts as the Access Point. The Base Board can connect to a PC via the USB cable and transmit information back to the CC430 Wireless Network GUI running on the PC. 2.4.1 Access Point (AP or Hub) The MSP-EXP430F6137Rx Base Board functions as the Access Point (also called the Hub), to create and broadcast the star network using the SimpliciTI protocol. It allows compatible End Devices (EDs) to join the network. The Base Board displays the status and sensor information of the devices on the network on its LCD. The Base Board also provides its own status and sensor (temperature and light sensors) information to the display. The Base Board captures more detailed network and device information and provides that information to the PC GUI through the UART-USB bridge if the USB connection is enabled between the board and the PC. To start and operate the MSP-EXP430F6137Rx Base Board:
1. The MSP-EXP430F6137Rx Base Board displays "Access Point Up" on the LCD and starts accepting connections from the Satellite Boards. 2. When a new ED successfully joins the network, the LCD briefly displays "Added New Device" and resumes displaying network information. 3. When the network is active, the LCD displays the information of the AP and connected EDs. The first digit on the LCD indicates the address of the device (a number for an ED, 'H' for the Hub or AP). Subsequent digits show the temperature or RSSI value of the device. 4. The UP and DOWN buttons on the Base Board can be used to cycle through the device list. 5. The LEFT and DOWN buttons on the Base Board can be used to toggle the LCD to show the temperature or the received signal strength indicator (RSSI) value from the EDs. If the AP (Hub) is currently selected, the LCD switches between the temperature of the AP and the analog reading of the light sensor. 2.4.2 End Device (ED) The MSP-EXP430F5137Rx Satellite Board functions as an End Device on the star network that is created using the SimpliciTI protocol. 1. When supplied with power, the Satellite Board seeks out compatible network broadcasts from an AP and attempts to join the network. During this phase, the on-board LED slowly toggles on and off to indicate each attempt. 2. After it successfully joins the network, the Satellite Board periodically measures its temperature and transmits its heartbeat message to the AP. Each transmission is indicated by the brief pulse of the LED. 3. Additionally, the push button can be used to transmit an Alert message, which causes the AP to show this ED's information on the LCD. The exclamation mark (!) on the LCD also briefly turns on, further highlighting the Alert message to the user. 10 MSP-EXPCC430RFx Experimenter Kit Users Guide Copyright 2012, Texas Instruments Incorporated SLAU460November 2012 Submit Documentation Feedback www.ti.com 2.5 CC430 Wireless Network GUI Getting Started With the MSP-EXPCC430RFx Experimenter Kit The included CC430 Wireless Network GUI is designed to provide more detailed information as well as visual presentation of the network and device information. The GUI requires a PC USB connection from the MSP-EXPF6137Rx Base Board. The Base Board captures all status and sensor information from the devices (including the AP itself) and relays the prepared packets to the PC GUI. The GUI displays the wireless network in the star topology, showing the connected and disconnected devices along with their status information such as RSSI (relative distance from the AP), temperature, and remaining battery life. SLAU460November 2012 Submit Documentation Feedback Copyright 2012, Texas Instruments Incorporated MSP-EXPCC430RFx Experimenter Kit Users Guide 11 MSP-EXPCC430RFx Experimenter Kit Hardware www.ti.com 3 MSP-EXPCC430RFx Experimenter Kit Hardware 3.1 MSP-EXP430F6137Rx Hardware Description Figure 5. MSP-EXP430F6137Rx Base Board Hardware 3.2 MSP-EXP430F5137Rx Hardware Description Figure 6. MSP-EXP430F5137Rx Satellite Board Hardware 12 MSP-EXPCC430RFx Experimenter Kit Users Guide Copyright 2012, Texas Instruments Incorporated SLAU460November 2012 Submit Documentation Feedback www.ti.com 3.3 Schematics MSP-EXPCC430RFx Experimenter Kit Hardware Figure 7. MSP-EXP430F6137Rx Base Board Schematic Page 1 SLAU460November 2012 Submit Documentation Feedback Copyright 2012, Texas Instruments Incorporated MSP-EXPCC430RFx Experimenter Kit Users Guide 13 MSP-EXPCC430RFx Experimenter Kit Hardware www.ti.com Figure 8. MSP-EXP430F6137Rx Base Board Schematic Page 2 14 MSP-EXPCC430RFx Experimenter Kit Users Guide Copyright 2012, Texas Instruments Incorporated SLAU460November 2012 Submit Documentation Feedback www.ti.com MSP-EXPCC430RFx Experimenter Kit Hardware Figure 9. MSP-EXP430F6137Rx Base Board Schematic Page 3 SLAU460November 2012 Submit Documentation Feedback Copyright 2012, Texas Instruments Incorporated MSP-EXPCC430RFx Experimenter Kit Users Guide 15 MSP-EXPCC430RFx Experimenter Kit Hardware www.ti.com Figure 10. MSP-EXP430F5137Rx Satellite Board Schematic 16 MSP-EXPCC430RFx Experimenter Kit Users Guide Copyright 2012, Texas Instruments Incorporated SLAU460November 2012 Submit Documentation Feedback www.ti.com 3.4 PCB Layout MSP-EXPCC430RFx Experimenter Kit Hardware Figure 11. MSP-EXP430F6137Rx Base Board Layout SLAU460November 2012 Submit Documentation Feedback Copyright 2012, Texas Instruments Incorporated MSP-EXPCC430RFx Experimenter Kit Users Guide 17 MSP-EXPCC430RFx Experimenter Kit Hardware www.ti.com Figure 12. MSP-EXP430F5137Rx Satellite Board Layout 18 MSP-EXPCC430RFx Experimenter Kit Users Guide Copyright 2012, Texas Instruments Incorporated SLAU460November 2012 Submit Documentation Feedback www.ti.com MSP-EXPCC430RFx Experimenter Kit Firmware 4 4.1 MSP-EXPCC430RFx Experimenter Kit Firmware This section describes the firmware applications provided with the project. Detailed information on the project construction, the use of the 5xx/6xx Core Library, the use of the TI's SimpliciTI RF stack, and how to set up and import the projects is included. Source code for the CC430F6137 and the CC430F5137 firmware application is installed to the [INSTALL_PATH]\src\ folder as described in Section 2.2. Import Project in Code Composer Studio To import the project into CCS:
1. Open CCS. 2. Select a new project workspace outside of the project folder. 3. Select Project-->Import Existing Project. 4. Browse to the [PROJECT_ROOT]\CCS folder. 5. Click Finish NOTE:
For CCS, while the project root is in the outer directory, the CCS project files are located inside the CCS folder. To enable the portability of the project, the file macros.ini is created to define the root. Additionally, all project code files (.c, .h) are added as linked resources with their relative path to the project root. 4.2 Open Project in IAR Embedded Workbench To open the project in IAR Embedded Workbench:
1. Open IAR. 2. Select Project Add Existing Project 3. Browse to the [PROJECT_ROOT]\IAR folder 4. Select the project file *.ewp to open the project 4.3 SimpliciTI RF Protocol The SimpliciTI protocol is a simple low-power RF network protocol designed for small RF networks. Such networks typically contain battery-operated devices that require long battery life, low data rate, low duty cycle, and have a limited number of nodes talking directly to each other or through an access point or range extenders. Access point and range extenders are not required but provide extra functionality such as store and forward messages. The SimpliciTI protocol requires minimal MCU resource requirements, which results in low system cost. The SimpliciTI protocol was designed for easy implementation and deployment out-of-the-box on several TI RF platforms such as the MSP430 family of low-power MCUs and the CC1xxx, CC25xx, and CC430 transceivers and SoCs. For more information on the SimpliciTI protocol, visit www.ti.com/simpliciti. 4.4 SimpliciTI Configuration for the MSP-EXPCC430RFx User Experience The MSP-EXPCC430RFx User Experience application uses the SimpliciTI protocol in its star network configuration to enable a sensor hub with the MSP-EXP430F6137Rx Base Board and multiple sensor nodes (End Devices) with the MSP-EXP430F5137Rx Satellite Board. Minor configuration changes were made to the stack to support CC430F6137 and CC430F5137 devices on SimpliciTI. The SimpliciTI network is configured to accept up to 16 end devices. In the radio configuration, the frequency settings are configured specifically for the frequency bands regulated by the geographical locations. Specifically they are 915-MHz band for the US, 868-MHz band for Europe, and 433-MHz for most other locations. SLAU460November 2012 Submit Documentation Feedback Copyright 2012, Texas Instruments Incorporated MSP-EXPCC430RFx Experimenter Kit Users Guide 19 MSP-EXPCC430RFx Experimenter Kit Software www.ti.com On the MSP-EXP430F5137Rx Satellite Board, two types of packets, heartbeat and alert, are prepared for SimpliciTI transmissions. The MSP-EXP430F6137Rx Base Board running the AP stack is configured to expect and process these two types of packets accordingly. 4.5 5 5xx/6xx Core Libraries The CC430 devices are a member of the MSP430 5xx/6xx family devices. The 5xx/6xx family architecture introduces several new core peripherals to enhance the device performance, optimize power consumption, and allow for high flexibility and fine control of various aspects of the device core. These peripherals include the Power Management Module (PMM), Unified Clock System (UCS), Port Map (PMAP), and Flash modules. The 5xx/6xx core libraries provide a simple and efficient way of configuring and handling these modules. The MSP-EXPCC430RFx User Experience utilizes the 5xx/6xx core libraries to properly configure and start the CC430 core peripherals in the right sequence. The 5xx/6xx Core Libraries are incorporated into the MSP430Ware DriverLib. More information and download links for MSP430Ware and DriverLib can be found at http://software-
dl.ti.com/msp430/msp430_public_sw/mcu/msp430/MSP430ware/latest/index_FDS.html. MSP-EXPCC430RFx Experimenter Kit Software The MSP-EXPCC430RFx software package (MSP-EXPCC430RFx Software Download) includes the CC430 Wireless Network GUI, which interfaces with the MSP-EXPCC430F6137Rx Base Board through USB to display the wireless network based on the data received through the USB connection. In addition to displaying the network topology, the GUI also offers vital information for the Access Point and the End Devices including the supply voltage (VCC), temperature, and the End Devices' Received Signal Strength Indicator (RSSI). 5.1 Requirements When modifying the CC430 Wireless Network GUI source code, Microsoft Visual C++ and Qt package are required. Microsoft Visual C++ is part of the Microsoft Visual Studio suite, which can be downloaded at http://www.microsoft.com/visualstudio/en-us/products/2010-editions/express. Qt is a cross-platform application framework provided by Nokia, which can be downloaded at http://qt.nokia.com/downloads/. 6 References 1. MSP-EXPCC430RFx Experimenter Kit Product folder (www.ti.com/tool/msp-expcc430rfx) 2. MSP-EXPCC430RFx User Experience Software Package: MSP-EXPCC430RFx Software Download 3. CC430F6137 product folder: http://www.ti.com/product/cc430f6137 4. CC430F5137 product folder: http://www.ti.com/product/cc430f5137 5. CC430 User's Guide (SLAU259) 6. eZ430-Chronos Wiki: http://processors.wiki.ti.com/index.php/EZ430-Chronos 7. eZ430-Chronos product folder: http://www.ti.com/tool/ez430-chronos 8. MSP430 home page: http://www.ti.com/msp430 9. SimpliciTI product page folder: http://www.ti.com/simpliciti 20 MSP-EXPCC430RFx Experimenter Kit Users Guide Copyright 2012, Texas Instruments Incorporated SLAU460November 2012 Submit Documentation Feedback www.ti.com 7 Bills of Materials (BOM) Bills of Materials (BOM) Table 1. MSP-EXP430F6137R9 Base Board (HW-V2.1) BOM Part Value Toleran Package ce Manufacturer Details Distributor Part No. Johanson Technology Johanson Technology 500R07S2R2BV4T 500R07S2R2BV4T Capacitors C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 C11 C12 C13 C14 C15 C16 C17 C18 C19 C20 C21 C22 C23 C24 C25 C26 C27 C28 C29 C30 C31 C32 C33 C34 C35 C36 C37 C38 C39 C40 C41 C42 C43 C44 C45 C47 C48 n.m. n.m. 2.2pF 100nF 1uF 10nF 33pF 33pF 22pF 22pF 1uF 100nF 100nF 1uF 100nF 100nF 100nF 1nF n.m. n.m. n.m. 100uF 100nF 68pF 10uF 2pF 2pF 2pF 470nF 27pF 27pF 10uF 100nF 10uF 100nF 10uF 100nF 100nF 2pF 100nF 2pF 100nF 100nF 100nF 1.5pF 100nF 10uF C0402 C0402 C0402 C0402 C0603 C0402 10%
10%
10%
0,25pF C0402 0,25pF C0402 0,25pF C0402 0,25pF C0402 10%
10%
10%
10%
10%
10%
10%
10%
20%
10%
20%
C0603 C0402 C0402 C0603 C0402 C0402 C0402 C0402 C0402 C0402 C0402 C-POLB/3528 C0603 C0402 C0603 0,25pF C0402 0,25pF C0402 0,25pF C0402 10%
C0402 0,25pF C0402 0,25pF C0402 10%
10%
20%
10%
20%
10%
10%
C0603 C0402 C0603 C0402 C0603 C0402 C0402 0,25pF C0402 10%
C0402 0,25pF C0402 10%
10%
10%
10%
20%
C0402 C0402 C0402 C0402 C0402 C0603 SLAU460November 2012 Submit Documentation Feedback MSP-EXPCC430RFx Experimenter Kit Users Guide 21 Copyright 2012, Texas Instruments Incorporated Bills of Materials (BOM) www.ti.com Table 1. MSP-EXP430F6137R9 Base Board (HW-V2.1) BOM (continued) Manufacturer Details Distributor Part No.
(PESD5V0U1UB) Ferrit, SMT, 250mA Ferrit, SMT, 780mA Murata Murata Johanson Technology Johanson Technology Johanson Technology Johanson Technology Johanson Technology Johanson Technology Johanson Technology Johanson Technology BLM15HG102SN1D BLM15AX700SN1 L-07W12NJV4S L-07W18NJV4S L-07W15NJV4S L-07W2N2JV4S L-07W15NJV4S L-07W12NJV4S L-07W18NJV4S L-07C15NJV6T / L-
07W15NJV6T Part C49 C50 C51 C52 C53 C54 C55 C56 Diodes D1 D2 Inductors L1 L2 L4 L5 L6 L7 L8 L9 L10 L11 Resistors R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 R12 R13 R14 R15 R16 R17 R18 R19 R20 R21 R22 Value 2.2nF 1pF 1.5pF 100pF 1.5pF 1.5pF 6.8pF n.m. 1N4148WT n.m. BLM15HG102SN1D BLM15AX700SN1 12nH 18nH 15nH 2,2nH 15nH 12nH 18nH 15nH n.m. n.m. 470R 750R 47kR 100R 100R 47kR 47kR 100R 100R 33kR 33R 33R 1.5kR 6.8kR 3.3kR 1.5kR 1.5kR 100R 15kR 47kR Toleran Package ce 0,25pF C0402 0,25pF C0402 0,25pF C0402 10%
C0402 0,25pF C0402 0,25pF C0402 0,25pF C0402 C0402 SOD523 SOD523 L0402 L0402 L0402 L0402 L0402 5%
5%
5%
0,2nH L0402 5%
5%
5%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
L0402 L0402 L0402 L0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 22 MSP-EXPCC430RFx Experimenter Kit Users Guide SLAU460November 2012 Submit Documentation Feedback Copyright 2012, Texas Instruments Incorporated www.ti.com Bills of Materials (BOM) Table 1. MSP-EXP430F6137R9 Base Board (HW-V2.1) BOM (continued) Manufacturer Details Distributor Part No. Part R23 R24 R25 R26 R27 R28 R29 R30 R31 R32 R33 R34 R35 R36 R37 IC IC1 IC2 IC3 IC4 IC5 IC6 IC7 IC8 Miscellaneous SW1 SW2 SW3 SW4 SW_D SW_L SW_R SW_RES SW_U ANT1 ANT2 BAT1 BAT2 LCD1 LED1 LED2 LED3 LED4 Value 47kR 3.3kR 3.3kR 100kR 100kR 33kR 10kR 47kR 100R 270R 56kR 0R 56kR 47kR 0R Toleran Package ce 1%
R0402 1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 CC430F6137IRGC S-PQFP-N64 TUSB3410VF AT24C12810-TU TPS77301DGK TPD2E001DRL SN74CBTLV3384D BQR SFH5711 MSP430F1612IPM VF32 TSSOP8 MSO8 SOT533-5 24-SSOP SFH5711 PM/PAG64 JS203011CQN JS203011CQN J202011CQN JS202011CQN J202011CQN JS202011CQN J202011CQN JS202011CQN B3FS-1002P B3FS-1002P B3FS-1002P B3FS-1002P B3FS-1002P FSM2JSMA FSM2JSMA FSM2JSMA FSM2JSMA FSM2JSMA 0920AT50A080 n.m. 1028_KEYSTONE 1028_KEYSTONE FH-1138H APT1608QBC/D(blu e) APT1608MGC(gree n) APT1608SYCK(yello w) APT1608SRCPRV(r ed) TI TI Atmel TI TI TI Osram TI C&K Components C&K Components C&K Components C&K Components Omron Omron Omron Omron Omron Johanson Technology Johanson Technology Keystone Keystone TI 868/915MHz 433MHz CC430F6137 TUSB3410VF AT24C12810-TU TPS77301DGK TPD2E001DRL SN74CBTLV3384 SFH5711 MSP430F16x JS203011CQN JS203011CQN JS203011CQN JS203011CQN B3FS-1002P B3FS-1002P B3FS-1002P B3FS-1002P B3FS-1002P 0920AT50A080 0433AT62A0020 1028 1028 FH-1138H APT1608QBC/D APT1608MGC APT1608SYCK LED0603 Kingbright blue LED0603 Kingbright green LED0603 Kingbright yellow LED0603 Kingbright red APT1608SRCPRV SLAU460November 2012 Submit Documentation Feedback MSP-EXPCC430RFx Experimenter Kit Users Guide 23 Copyright 2012, Texas Instruments Incorporated Bills of Materials (BOM) www.ti.com Table 1. MSP-EXP430F6137R9 Base Board (HW-V2.1) BOM (continued) Part Value Toleran Package ce Manufacturer Details Distributor Part No. Q1 Q2 Q3 T1 T2 P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P12 P13 P14 CON1 CON2 CON3 CON4 CON5 CON6 PCB FT10A-12,0/16-30-
30/27 CTA531-26.000-16-
10/10/A CC7V-
T1A_32,768kHz_12, 5pF SI2323DS SI2323DS n.m. n.m. n.m. n.m. n.m. PINHD-1X3 PINHD-1X3 PINHD-1X2 PINHD-1X2 PINHD-1X2 PINHD-1X3 PINHD-1X2 PINHD-2X4 PINHD-1X2 n.m. 5032-4PIN Coftech NX5032 Compotek hf crystal 20ppm 3216 Micro Crystal watch crystal SOT23-3 SOT23-3 1X16 1X16 1X16 1X3 1X3 1X3 1X3 1X2 1X2 1X2 1X3 1X2 2X4 1X2 BU-SMA-V Vishay Vishay P-Channel 20-V MOSFET P-Channel 20-V MOSFET MPE Garry MPE Garry MPE Garry MPE Garry MPE Garry MPE Garry MPE Garry MPE Garry MPE Garry or identical in construction or identical in construction or identical in construction or identical in construction or identical in construction or identical in construction or identical in construction or identical in construction or identical in construction SMA Female Connector USB-MINI_2486_01 USB-MINI_2486_01 LUMBERG NEB21R TFM-110-02-S-D-A-
K TFM-110-02-S-D-A-
K n.m. DC_BUCHSE_2, 1MM LUMBERG 10X2_SAMTEC_M SAMTEC 10X2_SAMTEC_M SAMTEC STL_31-06 SGU MPE 1,283mm x 100mm x 120mm FR4, TG150, see CC-EXP-
4306137RF9-HW-
V1-PCB.pdf 12MHz, 16pF, 30ppm CTA531-26.000-16-
10/10/A CC7V-
T1A_32,768kHz_12, 5pF provided separately by EMS provided separately by EMS provided separately by EMS provided separately by EMS provided separately by EMS 0871-1-003-0-T-xso-
1260 0871-1-003-0-T-xso-
1260 0871-1-002-0-T-xso-
1260 0871-1-002-0-T-xso-
1260 0871-1-002-0-T-xso-
1260 0871-1-003-0-T-xso-
1260 0871-1-002-0-T-xso-
1260 0871-2-004-0-T-xso-
1260 0871-1-002-0-T-xso-
1260 2486 01 NEB 21 R TFM-110-02-S-D-A-
K TFM-110-02-S-D-A-
K STL_31-06 SGU 24 MSP-EXPCC430RFx Experimenter Kit Users Guide SLAU460November 2012 Submit Documentation Feedback Copyright 2012, Texas Instruments Incorporated www.ti.com Bills of Materials (BOM) Table 2. MSP-EXP430F5137R9T Satellite Board (HW-V2.0) BOM Part Value Tolerance Package Manu-
facturer Details Distributor Part No. Capacitors C1 C2 C3 100uF n.m. n.m. n.m. 470 C4 Resistors R1 Miscellaneous SW1 B3U-1000P SW2 B3U-1000P MODUL1 A85200101 C1210 C0402 C0402 C0402 R0402 B3U-1000P B3U-1000P Omron Omron AMBER wireless CON1 10X2_SAMTEC_F Samtec 10x2, female CON2 10X2_SAMTEC_F Samtec 10x2, female M66210110 M66210110 AMB8520 -
ungeprft SFM-110-02-S-D-
A-K SFM-110-02-S-D-
A-K 22-03-5035 CON3 CON4 CON5 LED1 ANT1 PCB 22-03-5035 n.m. BL31-006U APT1608SRCPRV n.m. 1x3, 2.5mm 2x9, 2.54mm 1x6, 1.27mm 0603 Molex MPE male Pinhead Kingbright red MPE BL31-006U Johanson 433MHz, SMD Johanson 0433AT62A0020 SLAU460November 2012 Submit Documentation Feedback MSP-EXPCC430RFx Experimenter Kit Users Guide 25 Copyright 2012, Texas Instruments Incorporated Bills of Materials (BOM) www.ti.com Table 3. MSP-EXP430F6137R4 Base Board (HW-V2.1) BOM Part Value Tol. Package Manufacturer or Comments Distributor Part No. Capacitors C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 C11 C12 C13 C14 C15 C16 C17 C18 C19 C20 C21 C22 C23 C24 C25 C26 C27 C28 C29 C30 C31 C32 C33 C34 C35 C36 C37 C38 C39 C40 C41 C42 C43 C44 C45 C47 C48 2.2pF n.m. n.m. 100nF 1uF 10nF 33pF 33pF 22pF 22pF 1uF 100nF 100nF 1uF 100nF 100nF 100nF 1nF 220pF n.m. n.m. 100uF 100nF n.m. 10uF 2pF 2pF 2pF 470nF 27pF 27pF 10uF 100nF 10uF 100nF 10uF 100nF 100nF 2pF 100nF 2pF 100nF 100nF 100nF 220pF 100nF 10uF 0,25pF C0402 Johanson Technology specific for 433MHz var ***R4 500R07S2R2BV4T C0402 C0402 C0402 C0603 C0402 C0402 C0402 C0402 C0402 C0603 C0402 C0402 C0603 C0402 C0402 C0402 C0402 C0402 C0402 C0402 C-POLB/3528 C0603 C0402 C0603 C0402 C0402 C0402 C0402 C0402 C0402 C0603 C0402 C0603 C0402 C0603 C0402 C0402 C0402 C0402 C0402 C0402 C0402 C0402 C0402 C0402 C0603 10%
10%
10%
5%
5%
5%
5%
10%
10%
10%
10%
10%
10%
10%
10%
10%
20%
10%
20%
0,25pF 0,25pF 0,25pF 10%
5%
5%
10%
10%
20%
10%
20%
10%
10%
0,25pF 10%
0,25pF 10%
10%
10%
10%
10%
20%
Johanson Technology specific for 433MHz var ***R4 500R07S2R2BV4T specific for 433MHz var ***R4 specific for 433MHz var ***R4 specific for 433MHz var ***R4 26 MSP-EXPCC430RFx Experimenter Kit Users Guide SLAU460November 2012 Submit Documentation Feedback Copyright 2012, Texas Instruments Incorporated www.ti.com Bills of Materials (BOM) Part C49 C50 C51 C52 C53 C54 C55 C56 Diodes D1 D2 Inductors L1 L2 L4 L5 L6 L7 L8 L9 L10 L11 Resistors R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 R12 R13 R14 R15 R16 R17 R18 Table 3. MSP-EXP430F6137R4 Base Board (HW-V2.1) BOM (continued) Value Package Tol. Part No. Manufacturer or Comments Distributor specific for 433MHz var ***R4 specific for 433MHz var ***R4 specific for 433MHz var ***R4 specific for 433MHz var ***R4 specific for 433MHz var ***R4 specific for 433MHz var ***R4
(PESD5V0U1UB) Murata Murata Johanson Technology Johanson Technology Johanson Technology Johanson Technology Johanson Technology Johanson Technology Johanson Technology Johanson Technology Ferrit, SMT, 250mA BLM15HG102SN1D Ferrit, SMT, 780mA BLM15AX700SN1 L-07W16NJV4S L-07W27NJV4S L-07W47NJV4S L-07W51NJV4S L-07W16NJV4S L-07W27NJV4S specific for 433MHz var ***R4 specific for 433MHz var ***R4 specific for 433MHz var ***R4 specific for 433MHz var ***R4 specific for 433MHz var ***R4 specific for 433MHz var ***R4 specific for 433MHz var ***R4 specific for 433MHz var ***R4 2.2nF 2,7pF 3,9pF 220pF 3,9pF 220pF 4,7pF n.m. 1N4148WT n.m. BLM15HG102SN1D BLM15AX700SN1 16nH 27nH 47nH n.m. 51nH 16nH 27nH n.m. n.m. n.m. 470R 750R 47kR 100R 100R 47kR 47kR 100R 100R 33kR 33R 33R 1.5kR 6.8kR 3.3kR 1.5kR 10%
0,25pF C0402 C0402 0,25pF C0402 10%
C0402 0,25pF C0402 10%
C0402 0,25pF C0402 C0402 SOD523 SOD523 L0402 L0402 L0402 L0402 L0402 L0402 L0402 L0402 L0402 L0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 5%
5%
5%
5%
5%
5%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
SLAU460November 2012 Submit Documentation Feedback MSP-EXPCC430RFx Experimenter Kit Users Guide 27 Copyright 2012, Texas Instruments Incorporated Bills of Materials (BOM) www.ti.com Part R19 R20 R21 R22 R23 R24 R25 R26 R27 R28 R29 R30 R31 R32 R33 R34 R35 R36 R37 IC IC1 IC2 IC3 IC4 IC5 IC6 IC7 IC8 Miscellaneous SW1 SW2 SW3 SW4 SW_D SW_L SW_R SW_RES SW_U ANT1 ANT2 BAT1 BAT2 LCD1 LED1 LED2 LED3 Table 3. MSP-EXP430F6137R4 Base Board (HW-V2.1) BOM (continued) Value Package Tol. Part No. Manufacturer or Comments Distributor 1.5kR 100R 15kR 47kR 47kR 3.3kR 3.3kR 100kR 100kR 33kR 10kR 47kR 100R 270R 56kR 0R 56kR 47kR 0R 1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 R0402 CC430F6137IRGC S-PQFP-N64 TUSB3410VF AT24C12810-TU TPS77301DGK TPD2E001DRL SN74CBTLV3384DBQ R SFH5711 MSP430F1612IPM VF32 TSSOP8 MSO8 SOT533-5 24-SSOP SFH5711 PM/PAG64 JS203011CQN JS203011CQN J202011CQN J202011CQN J202011CQN FSM2JSMA FSM2JSMA FSM2JSMA FSM2JSMA FSM2JSMA n.m. 0433AT62A0020 1028_KEYSTONE 1028_KEYSTONE FH-1138H APT1608QBC/D(blue) APT1608MGC(green) APT1608SYCK(yellow) JS202011CQN JS202011CQN JS202011CQN B3FS-1002P B3FS-1002P B3FS-1002P B3FS-1002P B3FS-1002P LED0603 LED0603 LED0603 TI TI Atmel TI TI TI Osram TI C&K Components C&K Components C&K Components C&K Components Omron Omron Omron Omron Omron Johanson Technology Johanson Technology Keystone Keystone TI Kingbright Kingbright Kingbright CC430F6137 TUSB3410VF AT24C12810-TU TPS77301DGK TPD2E001DRL SN74CBTLV3384 SFH5711 MSP430F16x JS203011CQN JS203011CQN JS203011CQN JS203011CQN B3FS-1002P B3FS-1002P B3FS-1002P B3FS-1002P B3FS-1002P 868/915MHz Antenna 0920AT50A080 433MHz Antenna 0433AT62A0020 1028 1028 FH-1138H APT1608QBC/D APT1608MGC APT1608SYCK blue green yellow 28 MSP-EXPCC430RFx Experimenter Kit Users Guide SLAU460November 2012 Submit Documentation Feedback Copyright 2012, Texas Instruments Incorporated www.ti.com Bills of Materials (BOM) Part LED4 Q1 Q2 Q3 T1 T2 P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P12 P13 P14 CON1 CON2 CON3 RF1 RF2 CON6 PCB Table 3. MSP-EXP430F6137R4 Base Board (HW-V2.1) BOM (continued) Value Package Tol. Part No. LED0603 Manufacturer or Comments Distributor Kingbright red APT1608SRCPRV(red
) FT10A-12,0/16-30-
30/27 CTA531-26.000-16-
10/10/A CC7V-
T1A_32,768kHz_12,5p F SI2323DS SI2323DS n.m. n.m. n.m. n.m. n.m. PINHD-1X3 PINHD-1X3 PINHD-1X2 PINHD-1X2 PINHD-1X2 PINHD-1X3 PINHD-1X2 PINHD-2X4 PINHD-1X2 n.m. 5032-4PIN Coftech NX5032 Compotek hf crystal 20ppm 3216 Micro Crystal watch crystal SOT23-3 SOT23-3 1X16 1X16 1X16 1X3 1X3 1X3 1X3 1X2 1X2 1X2 1X3 1X2 2X4 1X2 BU-SMA-V Vishay Vishay P-Channel 20-V MOSFET P-Channel 20-V MOSFET MPE Garry MPE Garry MPE Garry MPE Garry MPE Garry MPE Garry MPE Garry MPE Garry MPE Garry or identical in construction or identical in construction or identical in construction or identical in construction or identical in construction or identical in construction or identical in construction or identical in construction or identical in construction SMA Female Connector USB-MINI_2486_01 USB-MINI_2486_01 LUMBERG NEB21R TFM-110-02-S-D-A-K TFM-110-02-S-D-A-K n.m. DC_BUCHSE_2, 1MM LUMBERG 10X2_SAMTEC_M 10X2_SAMTEC_M SAMTEC SAMTEC STL_31-06 SGU MPE 1,283 mm x 100mm x 120mm, FR4, TG150, see CC-
EXP-4306137RF9-
HW-V2-PCB.pdf APT1608SRCPRV 12MHz, 16pF, 30ppm CTA531-26.000-16-
10/10/A CC7V-
T1A_32,768kHz_12,5p F provided separately by EMS provided separately by EMS provided separately by EMS provided separately by EMS provided separately by EMS 0871-1-003-0-T-xso-
1260 0871-1-003-0-T-xso-
1260 0871-1-002-0-T-xso-
1260 0871-1-002-0-T-xso-
1260 0871-1-002-0-T-xso-
1260 0871-1-003-0-T-xso-
1260 0871-1-002-0-T-xso-
1260 0871-2-004-0-T-xso-
1260 0871-1-002-0-T-xso-
1260 2486 01 NEB 21 R TFM-110-02-S-D-A-K TFM-110-02-S-D-A-K STL_31-06 SGU SLAU460November 2012 Submit Documentation Feedback MSP-EXPCC430RFx Experimenter Kit Users Guide 29 Copyright 2012, Texas Instruments Incorporated Bills of Materials (BOM) www.ti.com Table 4. MSP-EXP430F5137R4T Satellite Board (HW-V2.0) BOM Tol. Package Manufacturer Details Distributor Part No. Part Capacitors C1 C2 C3 C4 Resistors R1 Miscellaneous SW1 SW2 MODUL1 CON1 CON2 CON3 CON4 CON5 LED1 ANT1 PCB Value 100uF 3,3pF n.m. n.m. 470 B3U-1000P B3U-1000P A45201101 10X2_SAMTEC_F 10X2_SAMTEC_F 22-03-5035 n.m. BL31-006U APT1608SRCPRV 0433AT62A0020 C1210 C0402 C0402 C0402 R0402 B3U-1000P B3U-1000P Omron Omron AMBER wireless Samtec 10x2, female Samtec 10x2, female M66210110 M66210110 AMB4520-1, ungeprft SFM-110-02-S-D-A-
K SFM-110-02-S-D-A-
K 22-03-5035 1x3, 2.5mm Molex 2x9, 2.54mm 1x6, 1.27mm MPE 0603 Kingbright Johanson male Pinhead red MPE BL31-006U 433MHz, SMD Johanson 0433AT62A0020 30 MSP-EXPCC430RFx Experimenter Kit Users Guide Copyright 2012, Texas Instruments Incorporated SLAU460November 2012 Submit Documentation Feedback EVALUATION BOARD/KIT/MODULE (EVM) ADDITIONAL TERMS Texas Instruments (TI) provides the enclosed Evaluation Board/Kit/Module (EVM) under the following conditions:
The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the user indemnifies TI from all claims arising from the handling or use of the goods. Should this evaluation board/kit not meet the specifications indicated in the Users Guide, the board/kit may be returned within 30 days from the date of delivery for a full refund. THE FOREGOING LIMITED WARRANTY IS THE EXCLUSIVE WARRANTY MADE BY SELLER TO BUYER AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED, IMPLIED, OR STATUTORY, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. EXCEPT TO THE EXTENT OF THE INDEMNITY SET FORTH ABOVE, NEITHER PARTY SHALL BE LIABLE TO THE OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES. Please read the User's Guide and, specifically, the Warnings and Restrictions notice in the User's Guide prior to handling the product. This notice contains important safety information about temperatures and voltages. For additional information on TI's environmental and/or safety programs, please visit www.ti.com/esh or contact TI. No license is granted under any patent right or other intellectual property right of TI covering or relating to any machine, process, or combination in which such TI products or services might be or are used. TI currently deals with a variety of customers for products, and therefore our arrangement with the user is not exclusive. TI assumes no liability for applications assistance, customer product design, software performance, or infringement of patents or services described herein. REGULATORY COMPLIANCE INFORMATION As noted in the EVM Users Guide and/or EVM itself, this EVM and/or accompanying hardware may or may not be subject to the Federal Communications Commission (FCC) and Industry Canada (IC) rules. For EVMs not subject to the above rules, this evaluation board/kit/module is intended for use for ENGINEERING DEVELOPMENT, DEMONSTRATION OR EVALUATION PURPOSES ONLY and is not considered by TI to be a finished end product fit for general consumer use. It generates, uses, and can radiate radio frequency energy and has not been tested for compliance with the limits of computing devices pursuant to part 15 of FCC or ICES-003 rules, which are designed to provide reasonable protection against radio frequency interference. Operation of the equipment may cause interference with radio communications, in which case the user at his own expense will be required to take whatever measures may be required to correct this interference. General Statement for EVMs including a radio User Power/Frequency Use Obligations: This radio is intended for development/professional use only in legally allocated frequency and power limits. Any use of radio frequencies and/or power availability of this EVM and its development application(s) must comply with local laws governing radio spectrum allocation and power limits for this evaluation module. It is the users sole responsibility to only operate this radio in legally acceptable frequency space and within legally mandated power limitations. Any exceptions to this are strictly prohibited and unauthorized by Texas Instruments unless user has obtained appropriate experimental/development licenses from local regulatory authorities, which is responsibility of user including its acceptable authorization. For EVMs annotated as FCC FEDERAL COMMUNICATIONS COMMISSION Part 15 Compliant Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC Interference Statement for Class A EVM devices This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC Interference Statement for Class B EVM devices This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Increase the separation between the equipment and receiver. Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. For EVMs annotated as IC INDUSTRY CANADA Compliant This Class A or B digital apparatus complies with Canadian ICES-003. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Concerning EVMs including radio transmitters This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Concerning EVMs including detachable antennas Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This radio transmitter has been approved by Industry Canada to operate with the antenna types listed in the user guide with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Cet appareil numrique de la classe A ou B est conforme la norme NMB-003 du Canada. Les changements ou les modifications pas expressment approuvs par la partie responsable de la conformit ont pu vider lautorit de l'utilisateur pour actionner l'quipement. Concernant les EVMs avec appareils radio Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Concernant les EVMs avec antennes dtachables Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente
(p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. Le prsent metteur radio a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs dans le manuel dusage et ayant un gain admissible maximal et l'impdance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. SPACER SPACER SPACER SPACER SPACER SPACER SPACER SPACER This development kit is NOT certified as Confirming to Technical Regulations of Radio Law of Japan Important Notice for Users of this Product in Japan If you use this product in Japan, you are required by Radio Law of Japan to follow the instructions below with respect to this product:
1. Use this product in a shielded room or any other test facility as defined in the notification #173 issued by Ministry of Internal Affairs and Communications on March 28, 2006, based on Sub-section 1.1 of Article 6 of the Ministrys Rule for Enforcement of Radio Law of Japan, 2. Use this product only after you obtained the license of Test Radio Station as provided in Radio Law of Japan with respect to this product, or 3. Use of this product only after you obtained the Technical Regulations Conformity Certification as provided in Radio Law of Japan with respect to this product. Also, please do not transfer this product, unless you give the same notice above to the transferee. Please note that if you could not follow the instructions above, you will be subject to penalties of Radio Law of Japan.
(address) 24-1, Nishi-Shinjuku 6 chome, Shinjuku-ku, Tokyo, Japan Texas Instruments Japan Limited http://www.tij.co.jp 1. 61118328173 2. 3. http://www.tij.co.jp SPACER SPACER SPACER SPACER SPACER SPACER SPACER SPACER SPACER SPACER SPACER SPACER SPACER SPACER SPACER SPACER EVALUATION BOARD/KIT/MODULE (EVM) WARNINGS, RESTRICTIONS AND DISCLAIMERS For Feasibility Evaluation Only, in Laboratory/Development Environments. Unless otherwise indicated, this EVM is not a finished electrical equipment and not intended for consumer use. It is intended solely for use for preliminary feasibility evaluation in laboratory/development environments by technically qualified electronics experts who are familiar with the dangers and application risks associated with handling electrical mechanical components, systems and subsystems. It should not be used as all or part of a finished end product. Your Sole Responsibility and Risk. You acknowledge, represent and agree that:
1. You have unique knowledge concerning Federal, State and local regulatory requirements (including but not limited to Food and Drug Administration regulations, if applicable) which relate to your products and which relate to your use (and/or that of your employees, affiliates, contractors or designees) of the EVM for evaluation, testing and other purposes. 2. You have full and exclusive responsibility to assure the safety and compliance of your products with all such laws and other applicable regulatory requirements, and also to assure the safety of any activities to be conducted by you and/or your employees, affiliates, contractors or designees, using the EVM. Further, you are responsible to assure that any interfaces (electronic and/or mechanical) between the EVM and any human body are designed with suitable isolation and means to safely limit accessible leakage currents to minimize the risk of electrical shock hazard. 3. You will employ reasonable safeguards to ensure that your use of the EVM will not result in any property damage, injury or death, even if the EVM should fail to perform as described or expected. 4. You will take care of proper disposal and recycling of the EVMs electronic components and packing materials. Certain Instructions. It is important to operate this EVM within TIs recommended specifications and environmental considerations per the user guidelines. Exceeding the specified EVM ratings (including but not limited to input and output voltage, current, power, and environmental ranges) may cause property damage, personal injury or death. If there are questions concerning these ratings please contact a TI field representative prior to connecting interface electronics including input power and intended loads. Any loads applied outside of the specified output range may result in unintended and/or inaccurate operation and/or possible permanent damage to the EVM and/or interface electronics. Please consult the EVM User's Guide prior to connecting any load to the EVM output. If there is uncertainty as to the load specification, please contact a TI field representative. During normal operation, some circuit components may have case temperatures greater than 60C as long as the input and output are maintained at a normal ambient operating temperature. These components include but are not limited to linear regulators, switching transistors, pass transistors, and current sense resistors which can be identified using the EVM schematic located in the EVM User's Guide. When placing measurement probes near these devices during normal operation, please be aware that these devices may be very warm to the touch. As with all electronic evaluation tools, only qualified personnel knowledgeable in electronic measurement and diagnostics normally found in development environments should use these EVMs. Agreement to Defend, Indemnify and Hold Harmless. You agree to defend, indemnify and hold TI, its licensors and their representatives harmless from and against any and all claims, damages, losses, expenses, costs and liabilities (collectively, "Claims") arising out of or in connection with any use of the EVM that is not in accordance with the terms of the agreement. This obligation shall apply whether Claims arise under law of tort or contract or any other legal theory, and even if the EVM fails to perform as described or expected. Safety-Critical or Life-Critical Applications. If you intend to evaluate the components for possible use in safety critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, such as devices which are classified as FDA Class III or similar classification, then you must specifically notify TI of such intent and enter into a separate Assurance and Indemnity Agreement. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright 2012, Texas Instruments Incorporated
This product uses the FCC Data API but is not endorsed or certified by the FCC