501.2*50 Low battery alert red light ashing charging red light on Full charge light o 1) Product Name:
ONN Bluetooth Headset With Built-in MIC 2) Pairing Name: Onn Headset 3) Speaker Rated Power Input: 3mW 4) Speaker Maximum Input Power: 10mW 5) Loudspeaker Diameter: 10mm 6) Speaker Impedance: 16 15%
7) Sensitivity: 115 3dB 8) Charging Cable: 0.3M Troubleshooting I cannot turn on my ear buds Ensure earbuds are fully charged before turning it on. My mobile device is unable to nd the Bluetooth earbuds Make sure that the earbuds are in pairing mode (blue/red indicator light ashing). RemoveOnn Headset from Bluetooth setting list and set up again. If still no search found, please restart the headset and phone, and try again. After successfully paring, earbuds disconnect Check the battery level and recharge if low. Ensure earbuds are within 30ft of mobile device and free of disruptions. The connection may be aected by obstructions such as walls or other electronic devices.Try to move closer to the device you are connected to. When answering a call, I cannot hear anything Ensure the mobile device is connected to earbuds and not on speakerphone mode. Increase the volume on your mobile device. There is no sound when listening to music Increase the volume on your mobile device. Reconnect the earbuds to your mobile device. Check if the app has paused or stopped playback. Earbuds will not charge Check whether the charging cable is functional. Ensure the micro-USB charging cable is properly inserted in the earbuds and wall charger ports. Ensure the charging cable and wall charger are functional. Bluetooth Headset With Built-in MIC Model: ONB18WI001 Ver.01 Rev.08/30/18 3s 3s Wearing two sides Onn Headset Detachable 360O Press and hold for 3 seconds power on with voice prompt Press and hold for 3 seconds power o with tone Press and hold for 3 seconds when power o LED will ash red and blue when ready to pair You will hear "DiDi" tone when the connection is successful