submitted | available | document details (if available) | source link |
---|---|---|---|
January 09 2019 | Adobe PDF Library 15.0 |
various | 14. Users Manual | Users Manual | 2.63 MiB | / January 09 2019 |
User Guide Mini Smart Wi-Fi Socket Tapo 100 1910012457 REV1.0.0 Contents Conventions 1 More Info1 Introduction 2 Appearance 3 Set Up Your Smart Socket 4 Basic Device Control 5 Configure Your Smart Socket 6 Set Schedule 6 Enable Away Mode 7 Set Timer 7 Control Your Device via Voice 7 Device Sharing 8 Authentication 9 Conventions The socket or Tapo P100, or device mentioned in this User Guide stands for Tapo P100 Mini Smart Wi-Fi Socket without any explanations. Parameters provided in the pictures are just references for setting up the product, which may differ from the actual situation. You can set the parameters according to your demand. More Info The Quick Installation Guide can be found where you find this guide or inside the package of the extender. Specifications can be found on the product page at https://www.tapo.com/. Our Technical Support and troubleshooting information can be found at https://www.tapo.com/support/. 1 Introduction Tapo P100 Mini Smart Wi-Fi Socket is a compact home device that turns your typical electrical wall outlet into a controllable, customizable and multi-
functional outlet, enabling you to easily control your lights and household electronic devices via the Tapo app, no matter where you find yourself. Remote Control: Turn your smart socket on or off from anywhere using the Tapo app. Timer: Set a countdown timer to automatically turn the smart socket on or off after a certain amount of time. Schedule: Use Schedules to set your smart plug to automatically turn on and off. Away Mode: Set a period of time during which the smart socket will be randomly turned on and off to make it look like youre home. No Hub Required - Connect to your existing Wi-Fi router. Share Device: Add your family members to manage the smart socket together. Voice Control - Use Alexa or Google Assistant to control your devices with voice commands. 2 Appearance Image may differ from actual product due to different regional power specifications. We use the US version as an example. Power Button:
Press the power button to turn on or off the socket. Press and hold the power button for at least 5 seconds to to restore your smart socket to factory default settings and reenable setup mode. Smart Socket:
Plug in your device and control it from your smartphone. Status LED:
Off: Power is off. Blinking Orange and Green: The socket is ready for setup. Green: The socket is working normally. Blinking Green: The system is being upgraded. Orange: There is an error. Blinking Orange: The socket is connecting to a WI-Fi network. 3 Set Up Your Smart Socket Follow the steps below to set up your samrt socket via the Tapo app. 1. Download and install Tapo app Go to Google Play or the Apple App Store or scan the QR code below to download the Tapo app. 2. Log in to Tapo App Open the app and usse your TP-Link ID to log in. If you dont have a TP-Link ID, tap REGISTER and the app will guide you through the rest. 3. Add your device Tap the + button in the Tapo app, select Smart Plug and then follow step-by-step app instructions to complete the setup. OR 4 Basic Device Control After successfully setting up your smart socket, you will see the home page of the Tapo app. Here you can view the status of all devices that you've added and manage them. You can tap on the device to control and manage. Device Status Page Home Page You can set a schedule, enable away mode, You can toggle on or off the sockets any or set a timer to automatically control your time anywhere and tap the device to enter device, and view its runtime. the status page. Device Settings Tap to view the Device Settings page. You can change the device icon, name and location, you can also invite your family members to manage the device together. 5 Configure Your Smart Socket Schedule and Timer features allow you to create weekly schedule and countdown plans. All of your connected electronics will automatically work at your preset time, making your life convenient and energy-saving. Away Mode intelligently simulates someone being home by turning the plugged in device (like a lamp) on and off, making it appear that someone is home when youre on long trips to keep away people with ill intent. Control your device via voice and invite your family members to manage your device together. Set Schedule Tap to add a schedule for your smart socket to automatically turn on or off to simplify your daily routine. Tap + to add more schedules and you can also pause the schedule manually anytime. 6 Set Away Mode Tap to preset the Away Mode, set the beginning time and the end time, then your smart socket will be randomly turned on and off during this period. Set Timer Tap to set the timer, set a countdonw timer and your smart socket will automatically turn on or off after the time ends. Control Your Device via Voice button and select Voice Tap the hamburger Control, then you can choose a voice assistant and follow the instructions to control your device via voice. 7 Device Sharing You can invite your family members to manage your device together. On the home page, long press the device, you can select to remove, favorite or share it. Enter the TP-Link ID you want to share the device with, then tap SHARE. button You can also tap the hamburger and select Device Sharing to view your shared devices and devices shared from others. 8 Authentication COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. TP-Link is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders.. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd. Copyright 2019 TP-Link Technologies Co., Ltd. All rights reserved.. http://www.tp-link.com 9 FCC Compliance Information Statement Product Name: Mini Smart Wi-Fi Socket Model Number: Tapo P100 Responsible party:
TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 10 Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated. Issue Date: 2019.8.1 11 Canadian Compliance Statement This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions:
1 ) This device may not cause interference, and 2 ) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
1 ) 2 ) lappareil ne doit pas produire de brouillage;
lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, meme si le brouillage est susceptible den compromettre le fonctionnement. Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration dexposition aux radiations:
Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Industry Canada Statement CAN ICES-3 (B)/NMB-3(B) NCC Notice 12 BSMI Notice PCB Pb Cd Hg CrVI PBB PBDE 1. " 0.1 wt %" " 0.01 wt %"
2. " "
3. " "
Safety Information Keep the device away from water, fire, humidity or hot environments. Do not attempt to disassemble, repair, or modify the device. Do not use the device where wireless devices are not allowed. The socket-outlet shall be installed near the equipment and shall be easily accessible. Operating Temperature: 0~40 (32-104) Operating Humidity: 10%~90%RH, Non-condensing 13 Storage Humidity: 5%~90%RH, Non-condensing Automatic action type of the integrated switch: Micro-disconnection (Type 1.B) Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk. Explanation of the symbols on the product label Symbol Explanation Indoor use only AC voltage RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. 14
This product uses the FCC Data API but is not endorsed or certified by the FCC