SR20 AC1900 Smart Home Router with Touch Screen Users Manual

User Guide AC1900 Smart Home Router with Touch Screen Model No. SR20 REV1.0.0 1910011853 Content Chapter 1. Introduction ...................................................................................................................................................... 1 1.1 Product Overview ................................................................................................................................................................................. 1 1.2 Panel Layout ............................................................................................................................................................................................. 1 1.3 Positioning ................................................................................................................................................................................................ 1 Chapter 2. Easy Setup .......................................................................................................................................................... 2 2.1 Connection ............................................................................................................................................................................................... 2 2.2 Quick Setup .............................................................................................................................................................................................. 2 Chapter 3. Management Tools ....................................................................................................................................... 4 Chapter 4. Support................................................................................................................................................................ 5 1.1 The SR20 lets you control all your smart devices from one spot, making it easy to create rules and set schedules. Have your lights automatically turn off at night and set fans and air conditioners to only turn on when the temperature and time of day match your preferences. If you need to change your settings, you can adjust them from anywhere with your smartphone. 1.2 1.3 Place the SR20 in a well-ventilated place far from any heater or heating vent Avoid direct irradiation of any strong light (such as sunlight) Keep at least 2 inches (5 cm) of clear space around the SR20 Operating Temperature: 0~40 (32~104) Operating Humidity: 20%~85%RH, Non-condensing 2.1 1. Power off your modem by removing its power adapter and/or backup battery. 2. Connect the provided blue Ethernet cable to the Internet port on the modem and the router. 3. Re-insert the power adapter into your modem. 4. Plug in and connect the router's power adapter. 5. Press the Power ON Button on the back of the router and wait for the LCD splash screen to appear. 2.2 1. Time Zone Customize Region and Time Zone. Tap NEXT 2. Setup SSID and Password Enter SSID and Password for both 2.4GHz & 5GHz Tap NEXT to continue Tap SAVE and Review 3. Create a Kasa account Enter the email address and password Tap NEXT to continue 4. Log in to Kasa Log in with Kasa account Download Kasa app on the mobile device 1. Web browser alternative Connect the router to a laptop or mobile device via the Ethernet cable or Wi-Fi. Launch a web browser and enter http://tplinkwifi.net. If you haven't changed the administrative password, use

"admin" as the default for the username & password. Note: Default Wi-Fi password is printed on label underneath Router. 2. Mobile access The TP-LINK Kasa app lets you stay connected and control your Smart Home devices on the go. Notes:

Apple, the Apple logo, iPhone, iPad, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. Android is a trademark of Google, Inc. Use of this trademark is subject to Google Permissions. 3. Dashboard The Dashboard lets you control everything in your home. Use the touch screen and easy-to-follow prompts to manage your wireless network and smart home devices. If you encounter any technical issues during setup or configuration, please visit our support page at www.tp-link.com for web support and troubleshooting information. COPYRIGHT & TRADEMARKS is a registered trademark of TP-LINK Specifications are subject to change without notice. TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright 2016 TP-LINK TECHNOLOGIES CO., LTD. All rights reserved. http://www.tp-link.com FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 22 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Canadian Compliance Statement This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions:

1 This device may not cause interference, and 2 This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1 lappareil ne doit pas produire de brouillage;

2 lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, meme si le brouillage est susceptible den compromettre le fonctionnement. Caution:

The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. The high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 22cm between the radiator & your body. Dclaration d'exposition aux radiations:

Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 22 cm de distance entre la source de rayonnement et votre corps. Industry Canada Statement CAN ICES-3 (B)/NMB-3(B) NCC Notice BSMI Notice Safety Information When product has power button, the power button is one of the way to shut off the product; when there is no power button, the only way to completely shut off power is to disconnect the product or the power adapter from the power source. Dont disassemble the product, or make repairs yourself. You run the risk of electric shock and voiding the limited warranty. If you need service, please contact us. Avoid water and wet locations. Explanation of the symbols on the product label Symbol Explanation DC voltage Indoor use only RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment

(WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.