TEW726EC PCIe adapter Users Manual

 

TRENDnet Users Guide Cover Page TRENDnet Users Guide Contents Product Overview ........................................................................... 1 Package Contents .......................................................................................................... 1 Features ......................................................................................................................... 1 Product Hardware Features........................................................................................... 2 System Requirements .................................................................................................... 2 Application Diagram ...................................................................................................... 2 Installing your Wireless Adapter ...................................................... 3 Software Installation...................................................................................................... 3 Hardware Installation .................................................................................................... 5 Using the Wireless Utility ................................................................ 6 Wireless Utility Overview .............................................................................................. 7 Connect to your wireless network ............................................................................... 11 Connect to your wireless network using WPS ............................................................. 12 Create or modify wireless network profiles ................................................................ 15 Technical Specifications................................................................. 17 Troubleshooting ............................................................................ 18 Appendix ...................................................................................... 19 Copyright 2013 TRENDnet. All Rights Reserved. Table of Contents i TRENDnet Users Guide Product Overview TEW-726EC Package Contents In addition to your wireless adapter, the package includes:

CD-ROM (Utility & Drivers) Multi-Language Quick Installation Guide Standard and Low Profile Brackets If any package contents are missing or damaged, please contact the retail store, online retailer, or reseller/distributor from which the product was purchased. Copyright 2013 TRENDnet. All Rights Reserved. TEW-726EC Features TRENDnets N600 Wireless Dual Band PCIe Adapter, model TEW-726EC, upgrades a desktop computer to proven 300 Mbps dual band wireless speed and coverage. Quickly connect to a common 2.4 GHz or a less congested 5 GHz wireless network to seamlessly stream HD video and surf the internet. Advanced WPA and WPA2 encryption protects your wireless network. Multiple Input Multiple Output (MIMO) antenna technology increases wireless coverage and signal strength. WMM Quality of Service (QoS) technology prioritizes gaming, Internet calls, and video streams. Wi-Fi compliant with IEEE 802.11n standard (dual band 802.11n 2.4 GHz or 5 Backwards compatible with IEEE 802.11g, IEEE 802.11b, and IEEE 802.11a GHz connection) networks Low profile bracket included LED activity indicator PCI Express interface Detachable antennas Multiple Input Multiple Output (MIMO) antenna technology Wi-Fi Multimedia (WMM) Quality of Service (QoS) data prioritization Supports Infrastructure mode via Access Point and ad-hoc network via peer to peer communication Maximum reliability, throughput, and connectivity with Automatic Data Rate Switching Supports advanced wireless encryption up to WPA2-RADIUS Compatible with Windows 8 (32/64-bit), 7 (32/64-bit), Vista (32/64-bit), and XP

(32/64-bit) operating systems Easy user setup & diagnostic utilities Coverage of up to 100 meters indoor (330 feet) and 300 meters outdoor (980 feet) *

*Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications. Actual data throughput and coverage will vary depending on interference, network traffic, building materials and other conditions. 1 TRENDnet Users Guide Product Hardware Features Detachable antennas Low Profile Bracket Standard Bracket TEW-726EC Installing the low profile bracket Using a Philips screwdriver (not included), remove the 2 screws in the PCIe card holding the bracket in place by turning the screws counter clockwise and remove the standard size bracket. Once the standard size bracket is removed, attach the low profile bracket. Using a Philips screwdriver, secure the bracket to the card by driving the 2 screws into the slots where they were removed before by turning them clockwise until tightened. Once the bracket is secured, the antennas can be reattached. Activity LED PCI Express x1 Interface Detachable antennas The external 2dBi antennas can be attached/detached to the reverse SMA connectors located on the PCIe adapter. Activity LED Indicator -This LED turns solid when a wireless connection is established and blinks during wireless data transmission. The LED will blink every 10 sec. when disconnected. If WPS (Wi-Fi Protected Setup) is activated using the included utility, the LED will blink rapidly. Low Profile Bracket In addition to the standard PCI bracket, a low profile PCI bracket is included to allow installation of this adapter into computer cases that only accept the size of low profile PCI cards instead the standard larger PCI size. System Requirements Windows 8 (32/64-bit), Windows 7 (32/64-bit), Vista (32/64-bit), or XP (32/64-

bit) Available PCIe (PCI Express x1) slot CD-ROM Drive (Driver & Utility Installation with included CD) Copyright 2013 TRENDnet. All Rights Reserved. Application Diagram Each desktop computer has the wireless dual band PCIe adapter installed. One desktop computer wirelessly connected to the dual band router using the common 2.4GHz band and another computer wirelessly connected to the dual band router using the less-

congested 5GHz band. 2 TRENDnet Users Guide Installing your Wireless Adapter This section describes how to install the software driver and utility for the wireless adapter. Software Installation 1. Insert the included CD-ROM into your computers CD-ROM drive. 4. At the installation window, click Next. TEW-726EC 2. At the CD Autorun Prompt window, click Run Autorun.exe. Note: If the Autorun prompt does not appear automatically, open the CD contents and double-click Autorun.exe. 3. At the CD-ROM main menu, click Install Drivers & Utility. 5. You will be prompted to accept the end user license agreement. Select I accept the terms of the license agreement and click Next. Copyright 2013 TRENDnet. All Rights Reserved. 3 TRENDnet Users Guide 6. At the Install Location window, click Next. 7. Wait for the utility and drivers installation to complete. Copyright 2013 TRENDnet. All Rights Reserved. 8. You may receive a security prompt about the publisher of the driver software. If prompted, click Install this driver software anyway. Note: If you do not receive a security prompt, continue to the next step. TEW-726EC 9. After the process is completed, click Finish. 4 TRENDnet Users Guide Hardware Installation 1. Shut down your computer. Note: Shutdown menu option may vary in appearance depending on your operating system. 3. Close the computer case, and turn on your computer. TEW-726EC 2. Open your computer case and insert the wireless dual band PCIe card into an available PCI Express slot. Once installed, attached the antennas to PCIe card. 4. Locate and double click the TRENDnet Wireless Utility icon. Copyright 2013 TRENDnet. All Rights Reserved. 5 TRENDnet Users Guide TEW-726EC Using the Wireless Utility Upon completing the software installation, a desktop shortcut is automatically created. After installation, the software utility will start and open up automatically. If the utility does not start and open up automatically, double-click the desktop icon to start the utility. When the utility is started, you will the following icon in your system tray in the bottom right corner of the screen. You can right-click the system tray icon for additional options. Preferred WLANs This option allows to you easily connect to networks you have already connected to prior which are saved in the Profile Management window (Page 8). Available Networks This option will open up the utility and bring you to the Available Networks window (Page 7). Exit This option will close the utility and terminate the application. The application will no longer be running and accessible from your system tray. You will have to restart the application manually by double-clicking the Desktop icon. Copyright 2013 TRENDnet. All Rights Reserved. 6 TEW-726EC TRENDnet Users Guide Wireless Utility Overview Available Networks Window This window allows you to discover and connect to available wireless networks. Available Networks List This window displays a list of the available wireless networks found by your wireless adapter. In addition to displaying the wireless network name (SSID, the list will display additional information about the network such as MAC address

(BSSID), signal strength percentage, security type, channel, and mode

(a,b,g,n). Note: Since this adapter has dual-

band capability, available wireless network found on both the 2.4GHz band and 5GHz band will be displayed in the list. Close To close the utility, click Close. This does not terminate the wireless utility application and can still be accessed through the system tray or desktop icons. Refresh If you do not find your wireless network in the available networks list, click Refresh to rescan for available wireless networks. Connect After selecting the wireless network in the available networks list, you can click Connect to connect to the network or simply double-click the network in the list. If the wireless network has security enabled, you b t d t t Vertical/Horizontal Scroll You can click the arrows or click and drag the slider, to display more available networks or information. SSID, Channel, Encryption Type, BSSID, Signal Strength This will display the wireless network name (SSID), channel, and security/encryption type, MAC address

(BSSID), and Signal Strength of the wireless network you are currently connected. Copyright 2013 TRENDnet. All Rights Reserved. IP This will display the IP address of your wireless adapter assigned by the wireless network you are currently connected. Typically, the IP address is automatically assigned to your wireless adapter by the wireless network upon successful connection. Signal Strength/Link Quality The bars provide a graphical representation of the general signal strength and link connectivity to the wireless network you are currently connected. 7 TRENDnet Users Guide TEW-726EC Wireless Utility Overview Profile Management Window This window allows you to create and edit preconfigured wireless network profiles. You can create and manage the created profiles for home, work or public areas. Information This section displays general information about the selected wireless network profile. You must first select an existing profile in the list to view any information. Wireless Network Profile List When connecting to available networks, they are automatically saved to the profile list. Wireless Network Profile Order The buttons allow you to set the priority order in which to connect to your network profiles, top entry being first. If you lose connectivity to a currently connected network, the wireless adapter will automatically attempt to connect to network profiles defined in the list in order starting from the top. If the network in the first profile is unavailable after an undefined number of retries, then the adapter will move on to the next profile defined. New This allows you to manually add a new wireless network profile to the list. Properties This allows you to modify the settings of an existing wireless network profile such as security settings. You must first select an existing profile in the list to modify. Remove This allows you to remove an existing wireless network profile in the list. You must first select an existing profile in the list to remove. Connect This allows you to manually connect to an existing wireless network profile in the list regardless of the order set. You must first select an existing profile in the list to connect. Copyright 2013 TRENDnet. All Rights Reserved. 8 TRENDnet Users Guide TEW-726EC Wireless Utility Overview WPS (Wi-Fi Protected Setup) Window This window allows you to establish wireless connectivity using WPS to WPS supported device such as a wireless router/access point. For information on how to connect using WPS, please refer to the section Connect to your wireless network using WPS on page 12. WPS Push Button Method (Default) Allows you to establish wireless connectivity to a WPS supported device such as a wireless router/access point using the WPS Push Button method. WPS PIN Method Allows you to establish wireless connectivity to a WPS supported device such as a wireless router/access point using the WPS PIN method. Next After selecting the WPS method to use, click Next to continue to remaining steps of the WPS connection process. Copyright 2013 TRENDnet. All Rights Reserved. 9 TRENDnet Users Guide TEW-726EC Wireless Utility Overview About Window This window displays the wireless adapter MAC address, driver, and utility version reference information. MAC Address, Utility & Driver Version Displays the wireless adapter MAC address, utility, and driver version reference information. Copyright 2013 TRENDnet. All Rights Reserved. 10 TRENDnet Users Guide Connect to your wireless network 1. Open up the wireless utility. 2. Click on the Available Networks tab. 3. In the list, double click on your wireless network or select y our wireless network and click the Connect button. Copyright 2013 TRENDnet. All Rights Reserved. TEW-726EC 3. If your network has security enabled, you will be prompted to enter the Network Key and the encryption type will be detected automatically. Enter the Network Key and click Connect. Note: After entering the network key, you can click Display Key to show the characters you typed in for the network key to verify it is correct. 4. The wireless network information will appear at the bottom of the utility of the wireless network you are connected and the Signal Strength/Link Quality bars will turn green to indicate a successful connection. Connection Successful Note: If there is no information displayed and the bars do not turn green, you were not connected to the wireless network successfully. Please delete the wireless network from the Profile tab and repeat this process to verify if your key may have been entered incorrectly. If you are still experiencing issues connecting to your wireless network, you may need to verify the security settings of your wireless network to make sure they correct key is entered. Connection Unsuccessful 11 TRENDnet Users Guide Connect to your wireless network using WPS WPS (Wi-Fi Protected Setup) is a feature that makes it easy to connect devices to your wireless network. If your wireless router/access point supports WPS, you can use this feature to easily connect wireless devices to your network. Note: You can typically find out if you if your wireless router/access point supports WPS just by looking at the physical device. There should be a WPS push button located on the exterior casing of the device, if not, your device may not support WPS or you may need to reference your device documentation as to how WPS can be initiated on the deivce. If your device does not have an identifiable WPS push button on the exterior location, we would recommend using the standard connection method on the previous page. There are two methods the WPS feature can easily connect your wireless devices to your network.

(Recommended) Push Button Configuration (PBC) method PIN (Personal Identification Number) Method

(Recommended) Hardware Push Button (PBC) Method 1. Open up the wireless utility. TEW-726EC 2. Click on the WPS tab. 3. In the WPS window, the Push Button Configuration (PBC) option will be selected by default. If not, check the PBC option. 4. Click Next. Copyright 2013 TRENDnet. All Rights Reserved. 12 TRENDnet Users Guide 5. On your wireless router/access point, push the WPS button. Note: Typically, the WPS button hold time is 3-5 sec., then release. For TRENDnet routers/access points, the WPS hardware push button hold time is 3 seconds. If you are using another brand device, you may need to refer to your device documentation. 6. On the wireless utility, click Start. 7. A message will appear at the top of the utility indicating that the WPS process has been activated. Wait for the process to complete. 8. If successful, you will see the following message at the top and the connection information at the bottom of the utility will appear. TEW-726EC Note: If the WPS process fails, you will see the message below and connection information at the bottom of the utility will not be displayed. You may need to click Back and attempt the WPS process again. You may need to refer to your wireless router/access point documentation regarding the operation of WPS. Copyright 2013 TRENDnet. All Rights Reserved. 13 TRENDnet Users Guide PIN (Personal Identification Number) Method 1. Open up the wireless utility. 2. Click on the WPS tab. 3. Check the PIN Code option. 4. Click Next. 5. The client PIN Code will be generated automatically. 6. On your wireless router/access point, enter the client PIN Code into your wireless router/access point configuration page and start the WPS process. Note: You will need to access the device configuration page (typically through a web browser) to access the WPS section to enter the client PIN code and use the WPS PIN method. You may need to refer to your device documentation on how to access your Copyright 2013 TRENDnet. All Rights Reserved. TEW-726EC devices configuration page and locate the WPS section. The example below (from our TRENDnet TEW-692GR router) shows where the WPS client PIN information is entered. 6. On the wireless utility, click Start. 8. If successful, you will see the following message at the top and the connection information at the bottom of the utility will appear. Note: If the WPS process fails, you will see the message below and connection information at the bottom of the utility will not be displayed. You may need to click Back and attempt the WPS process again. You may need to refer to your wireless router/access point documentation regarding the operation of WPS. 14 TRENDnet Users Guide Create or modify wireless network profiles Wireless network profiles are profiles that define the parameters of an existing network such as the wireless network name (SSID) and security settings in order to allow for easier management especially if you connect to multiple wireless networks. When you connect to a wireless network using the Available Networks window, a profile for that network is automatically saved to your profile list so that the next time you are in range of that network, your computer will automatically connect to that predefined wireless network without having to manually scan and reconnect to the network. When a parameter (wireless network name or security key) changes in a wireless network that you had connected to before and saved to the profile list, you may need to modify the profile of that network and change to the correct parameters in order to reconnect. If you are connecting to a wireless network where the wireless network name (SSID) is not discoverable for security purposes, you may need to manually add a new profile to the list for this network in order to connect. Please note that these parameters are set based on the configuration parameters required by the wireless router/access point. For additional information on security parameters, you can refer to the Appendix. 1. Open up the wireless utility. 2. Click on the Profile Management tab. Copyright 2013 TRENDnet. All Rights Reserved. TEW-726EC You can either create a new wireless network profile or modify an existing profile in the list. a. New Profile Click New to create a new profile. OR b. Modify an existing Profile To modify an existing profile, click the profile in the list. Click Properties. 15 TRENDnet Users Guide Enter or modify the parameters for the wireless network profile. Profile Name Enter a name you easily identify in your profile list, for example Home or Office. Please note that this is not the same as your wireless network name and does not need to be the same as your wireless network name. Network Name (SSID) Enter the wireless network name of the network you are connecting. Network Type The most typical configuration type is Infrastructure which is used when connecting to a wireless router/access point. Ad-Hoc is only used when establishing a wireless one-to-one only connection with another wireless device or computer operating in ad-hoc mode. There are 2 security categories to choose. Basic security for personal Includes the most common security options under the Security Type drop-down menu. Copyright 2013 TRENDnet. All Rights Reserved. TEW-726EC Open \ Disable Wireless network has no security configured. No key is required. Open or Shared \ WEP Enter the WEP key for your wireless network. Wireless network has WEP security enabled, open or shared. Please note that the Key Index 1-4 must also match the same index configured on the wireless router/access point. WEP Key Format WEP Key Format HEX ASCII Character set 64-bit key length 128-bit key length 0-9 & A-F, a-f only 10 characters 26 characters Alphanumeric (a,b,C,?,*, /,1,2, etc.) 5 characters 13 characters WPA-PSK \ TKIP or AES Wireless network has WPA-PSK security enabled, TKIP or AES. Note: 8-63 alphanumeric characters (a,b,C,?,*, /,1,2, etc.) WPA2-PSK \ TKIP or AES Wireless network has WPA2-PSK security enabled. TKIP or AES. Note: 8-63 alphanumeric characters (a,b,C,?,*, /,1,2, etc.) Advance security for enterprise Includes all security options including advanced options under the Security Type drop-down that require additional authentication parameters to connect to the wireless network typically used offices and businesses that require a higher level of security. Additional security options:

WEP 802.1x Requires additional certificate installed for authentication. WPA-EAP or WPA2-EAP \ TKIP or AES Wireless network has WPA-EAP security enabled, TKIP or AES. Select the EAP (Extensible Authentication Protocol) Type. o EAP-TLS Requires additional certificate to be installed on computer for authentication purposes. o EAP-PEAP Requires additional certificate to be installed along with a password. 16 TRENDnet Users Guide Technical Specifications Hardware Interface Standards LED Indicator Data transmission: blinking PCI Express 1.0 IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n Power Consumption Link established: solid WPS (Wi-Fi Protected Setup): blinking rapidly Disconnected: blinks every ten seconds Transmit mode: 670mA max. Receive mode: 350mA max. Windows 8 (32/64-bit), 7 (32/64-bit), Vista (32/64-bit), XP (32/64-

bit) 66 x 55 mm 45 g (1.6 oz) Supported OS Dimensions Weight Temperature Operating: 0 ~ 40 C (32 ~ 104 F) Storage: -20 ~ 75 C (-4 ~ 167 F) 90% max. (non-condensing) DBPSK, DQPSK, DSSS, CCK, BPSK, QPSK, 16-QAM/64-QAM with OFDM 2 x 2 dBi dipole detachable antennas with reverse SMA connector 802.11b/g/n: 2.400 ~ 2.483 GHz 802.11a/n: 5.150 ~ 5.350 GHz / 5.725 ~ 5.825 GHz (FCC), 5.150 ~ 5.350 GHz / 5.470 ~ 5.725 GHz (ETSI) Humidity Certifications CE, FCC Wireless Modulation Antenna Frequency Data Rate

(auto fallback) 802.11a: up to 54 Mbps 802.11b: up to 11 Mbps Copyright 2013 TRENDnet. All Rights Reserved. Output Power Receiving Sensitivity Encryption Channels TEW-726EC 802.11g: up to 54 Mbps 802.11n: up to 300 Mbps (for 2.4 or 5 GHz) 2.4 GHz: Typical RF Output Power (tolerance +/- 2dB) 802.11b: 18 dBm 802.11g: 18 dBm 802.11n: HT20: 18 dBm HT40: 13 dBm 5 GHz: Typical RF Output Power (tolerance +/- 2 dB) 802.11a: 16 dBm 802.11n: HT20: 13 dBm HT40: 13 dBm 802.11a: -65dBm (typical) at 54 Mbps 802.11b: -76dBm (typical) at 11 Mbps 802.11g: -65dBm (typical) at 54 Mbps 802.11n: -62dBm (typical) at 300 Mbps (for 2.4 or 5 GHz) 64/128-bit WEP, WPA / WPA2-PSK, WPA/WPA2-RADIUS 2.4 GHz: 1~11 (FCC), 1~13 (ETSI) 5 GHz: 36, 40, 44, 48, 149, 153, 157, 161, 165 (FCC) 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 (ETSI)

*Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications. Actual data throughput and coverage will vary depending on interference, network traffic, building materials and other conditions. 17 TRENDnet Users Guide TEW-726EC Troubleshooting Q: I inserted the Utility & Driver CD-ROM into my computer's CD-ROM Drive and the installation menu does not appear automatically. What should I do?

Answer:

1. For Windows 7, if the installation menu does not appear automatically, click on the Windows Icon on the bottom left hand corner of the screen,, click the Search programs and files box, and type D:\Autorun.exe, where D in D:\Autorun.exe is the letter assigned to your CD-ROM Drive, and then press the ENTER key on your keyboard 2. For Windows Vista, if the installation menu does not appear automatically, click Start, click the Start Search box, and type D:\Autorun.exe where "D" in

"D:\autorun.exe" is the letter assigned to your CD-ROM Drive, and then press the ENTER key on your keyboard. 3. For Windows 2000/XP, if the installation menu does not appear automatically, click Start, click Run, and type D:\Autorun where "D" in "D:\Autorun.exe" is the letter assigned to your CD-ROM Drive, and then press the ENTER key on your keyboard. Q: I completed all the steps in the quick installation guide, but my Wireless USB Adapter is not connecting to my access point. What should I do?

Answer:

1. Verify that the SSID (Network Name) matches your wireless router or access point's SSID selected. 2. Please check with your network administrator for security key in order to access a secured wireless access point or router. Please refer to the User's Guide for more information regarding wireless network security. 3. Check your TCP/IP properties to ensure that Obtain an IP address automatically is 4. Double-click the Wireless Configuration Utility icon, click Available Networks and then click Refresh to check and see if there are any available wireless networks listed. Q: Windows is unable to recognize my hardware. What should I do?

Answer:

1. Make sure your computer meets the minimum requirements as specified in Section 1 of this quick installation guide. 2. You must complete the installation of the Wireless Configuration Utility (as described in Section 2) before connecting the Wireless USB Adapter to your computer. 3. Connect the Wireless USB Adapter to a different USB port on your computer. Q: I cannot open the Wireless Configuration Utility. What should I do?

Answer:

Access your device manager to make sure the adapter is installed properly. 1. To access the device manager on Windows 7, click on the Windows icon on the bottom left-hand corner, click Computer, click System Properties and then click Device Manager. 2. To access the device manager on Windows Vista, right-click Computer, click Properties and then click Device Manager. 3. To access the device manager on Windows XP, right-click My Computer, click Properties, click the Hardware tab, and then click Device Manager. If you see a networking device with a yellow question mark or exclamation point:

1. Uninstall the device from device manager 2. Remove the adapter from the computer 3. Click the Windows / Start icon, click All Programs, click TRENDnet Wireless and then click Uninstall. Copyright 2013 TRENDnet. All Rights Reserved. 18 TRENDnet Users Guide Appendix How to choose the type of security for your wireless network Setting up wireless security is very important. Leaving your wireless network open and unsecure could expose your entire network and personal files to outsiders. TRENDnet recommends reading through this entire section and setting up wireless security on your new router. There are a few different wireless security types supported in wireless networking each having its own characteristics which may be more suitable for your wireless network taking into consideration compatibility, performance, as well as the security strength along with using older wireless networking hardware (also called legacy hardware). It is strongly recommended to enable wireless security to prevent unwanted users from accessing your network and network resources (personal documents, media, etc.). In general, it is recommended that you choose the security type with the highest strength and performance supported by the wireless computers and devices in your network. Please review the security types to determine which one you should use for your network. Wireless Encryption Types WEP: Legacy encryption method supported by older 802.11b/g hardware. This is the oldest and least secure type of wireless encryption. It is generally not recommended to use this encryption standard, however if you have old 802.11 b or 802.11g wireless adapters or computers with old embedded wireless cards(wireless clients), you may have to set your router to WEP to allow the old adapters to connect to the router. Note: This encryption standard will limit connection speeds to 54Mbps. Copyright 2013 TRENDnet. All Rights Reserved. TEW-726EC WPA: This encryption is significantly more robust than the WEP technology. Much of the older 802.11g hardware was been upgraded (with firmware/driver upgrades) to support this encryption standard. Total wireless speeds under this encryption type however are limited to 54Mbps. WPA-Auto: This setting provides the router with the ability to detect wireless devices using either WPA or WPA2 encryption. Your wireless network will automatically change the encryption setting based on the first wireless device connected. For example, if the first wireless client that connects to your wireless network uses WPA encryption your wireless network will use WPA encryption. Only when all wireless clients disconnect to the network and a wireless client with WPA2 encryption connects your wireless network will then change to WPA2 encryption. NOTE: WPA2 encryption supports 802.11n speeds and WPA encryption will limit your connection speeds to 54Mbps WPA2: This is the most secure wireless encryption available today, similar to WPA encryption but more robust. This encryption standard also supports the highest connection speeds. TRENDnet recommends setting your router to this encryption standard. If you find that one of your wireless network devices does not support WPA2 encryption, then set your router to either WPA or WPA-Auto encryption. Note: Check the specifications of your wireless network adapters and wireless appliances to verify the highest level of encryption supported. 19 TRENDnet Users Guide TEW-726EC Compatible Wireless Standards Highest Performance Under This Setting Encryption Strength Additional Options Below is brief comparison chart of the wireless security types and the recommended configuration depending on which type you choose for your wireless network. Security Standard WPA2 WPA WEP IEEE 802.11a/b/g

(802.11n devices will operate at 802.11g to connect using this standard) IEEE 802.11a/b/g

(802.11n devices will operate at 802.11g to connect using this standard) IEEE 802.11a/b/g/n Up to 54Mbps Up to 54Mbps Up to 450Mbps*

Low Open System or Shared Key, HEX or ASCII, Different key sizes Open System ASCII 13 characters Medium TKIP or AES, Preshared Key or RADIUS TKIP Preshared Key 8-63 characters High TKIP or AES, Preshared Key or RADIUS AES Preshared Key 8-63 characters Recommended Configuration

*Dependent on the maximum 802.11n data rate supported by the device (150Mbps, 300Mbps, or 450Mbps) Copyright 2013 TRENDnet. All Rights Reserved. How to find your IP address?

Note: Please note that although the following procedures provided to follow for your operating system on configuring your network settings can be used as general guidelines, however, it is strongly recommended that you consult your computer or operating system manufacturer directly for assistance on the proper procedure for configuring network settings. Command Prompt Method Windows 2000/XP/Vista/7/8 1. On your keyboard, press Windows Logo+R keys simultaneously to bring up the Run dialog box. 2. In the dialog box, type cmd to bring up the command prompt. 3. In the command prompt, type ipconfig /all to display your IP address settings. Note: If you are experiencing difficulties, please contact your computer or operating system manufacturer for assistance. How to configure your network settings to obtain an IP address automatically or use DHCP?

Note: Please note that although the following procedures provided to follow for your operating system on configuring your network settings can be used as general guidelines, however, it is strongly recommended that you consult your computer or operating system manufacturer directly for assistance on the proper procedure for configuring network settings. Windows 8/7 a. Go into the Control Panel, click Network and Sharing Center. b. Click Change Adapter Settings, right-click the Local Area Connection icon. c. Then click Properties and click Internet Protocol Version 4 (TCP/IPv4). d. Then click Obtain an IP address automatically and click OK. Windows Vista a. Go into the Control Panel, click Network and Internet. b. Click Manage Network Connections, right-click the Local Area Connection icon and click Properties. c. Click Internet Protocol Version (TCP/IPv4) and then click Properties. 20 TRENDnet Users Guide TEW-726EC d. Then click Obtain an IP address automatically and click OK. Windows XP/2000 a. Go into the Control Panel, double-click the Network Connections icon b. Right-click the Local Area Connection icon and the click Properties. c. Click Internet Protocol (TCP/IP) and click Properties. d. Then click Obtain an IP address automatically and click OK. MAC OS 10.4/10.5/10.6 a. From the Apple, drop-down list, select System Preferences. b. Click the Network icon. c. From the Location drop-down list, select Automatic. d. Select and view your Ethernet connection. In MAC OS 10.4, from the Show drop-down list, select Built-in Ethernet and select the TCP/IP tab. In MAC OS 10.5/10.6, in the left column, select Ethernet. e. Configure TCP/IP to use DHCP. In MAC 10.4, from the Configure IPv4, drop-down list, select Using DHCP and click the Apply Now button. In MAC 10.5, from the Configure drop-down list, select Using DHCP and click the Apply button. In MAC 10.6, from the Configure drop-down list, select Using DHCP and click the Apply button. f. Restart your computer. Note: If you are experiencing difficulties, please contact your computer or operating system manufacturer for assistance. How to connect to a wireless network using the built-in Windows utility?

Note: Please note that although the following procedures provided to follow for your operating system on configuring your network settings can be used as general guidelines, however, it is strongly recommended that you consult your computer or operating system manufacturer directly for assistance on the proper procedure for connecting to a wireless network using the built-in utility. Windows 8/7 1. Open Connect to a Network by clicking the network icon (

area. or

) in the notification and then click Connect 2. In the list of available wireless networks, click the wireless network you would like to connect to, then click Connect. 4. You may be prompted to enter a security key in order to connect to the network. 5. Enter in the security key corresponding to the wireless network, and click OK. Windows Vista 1. Open Connect to a Network by clicking the Start Button. To. 2. In the Show list, click Wireless. 3. In the list of available wireless networks, click the wireless network you would like to connect to, then click Connect. 4. You may be prompted to enter a security key in order to connect to the network. 5. Enter in the security key corresponding to the wireless network, and click OK. Windows XP 1. Right-click the network icon in the notification area, then click View Available Wireless Networks. 2. In Connect to a Network, under Available Networks, click the wireless network you would like to connect to. 3. You may be prompted to enter a security key in order to connect to the network. 4. Enter in the security key corresponding to the wireless network, and click Connect. Copyright 2013 TRENDnet. All Rights Reserved. 21 TRENDnet Users Guide Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE:

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This product will be used for indoor operations. RoHS This product is RoHS compliant. Copyright 2013 TRENDnet. All Rights Reserved. TEW-726EC Europe EU Declaration of Conformity This product is herewith confirmed to comply with the Directive of 1999/5/EC and 2006/95/EC. EN60950-1: 2006 + A11 : 2009 + A1 : 2010 + A12 : 2011 Safety of Information Technology Equipment EN 300 328 V1.7.1 (2006-10) Class B Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive EN 301 489-1 V1.9.2 (2011-09) Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements EN 301 489-17 V2.2.1 (2012-09) Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2,4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment EN 301 893 : V1.6.1 EN 62311 : 2008 This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies. In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services. This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10 mW EIRP in the frequency range of 2454 2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France. 22 TRENDnet Users Guide esky [Czech]

Dansk [Danish]

Deutsch

[German]

TRENDnet tmto prohlauje, e tento TEW-726EC je ve shod se zkladnmi poadavky a dalmi pslunmi ustanovenmi smrnice 1999/5/ES a 2006/95/ES. Undertegnede TRENDnet erklrer herved, at flgende udstyr TEW-

726EC overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF og 2006/95/EF. Hiermit erklrt TRENDnet, dass sich das Gert TEW-726EC in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie 1999/5/EG und 2006/95/EG befindet. Eesti [Estonian]

Kesolevaga kinnitab TRENDnet seadme TEW-726EC vastavust direktiivi 1999/5/E ja 2006/95/E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. English Espaol

[Spanish]

[Greek]

Franais

[French]

Hereby, TRENDnet, declares that this TEW-726EC is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC and 2006/95/EC. Por medio de la presente TRENDnet declara que el TEW-726EC cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE, y 2006/95/CE. TRENDnet TEW-

726EC 1999/5/, 2006/95/

. Par la prsente TRENDnet dclare que l'appareil TEW-726EC est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE, 2006/95/CE et. Italiano[Italian]

Con la presente TRENDnet dichiara che questo TEW-726EC conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE e 2006/95/CE. Latviski [Latvian] AroTRENDnetdeklar, ka TEW-726EC atbilstDirektvas 1999/5/EK, un 2006/95/EK btiskajmprasbm un citiemar to saisttajiemnoteikumiem. Lietuvi

[Lithuanian]

iuo TRENDnet deklaruoja, kad is TEW-726EC atitinka esminius reikalavimus ir kitas 1999/5/EB ir 2006/95/EB Direktyvos nuostatas. Copyright 2013 TRENDnet. All Rights Reserved. Limited Warranty Nederlands

[Dutch]

Hierbij verklaart TRENDnet dat het toestel TEW-726EC in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG, en 2006/95/EG. Malti [Maltese]

Hawnhekk, TRENDnet, jiddikjara li dan TEW-726EC jikkonforma mal-

tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm fid-

Dirrettiva 1999/5/KE u 2006/95/KE. Magyar

[Hungarian]

Polski [Polish]

Portugus

[Portuguese]

Slovensko

[Slovenian]

Slovensky

[Slovak]

Alulrott, TRENDnet nyilatkozom, hogy a TEW-726ECmegfelel a vonatkoz alapvet kvetelmnyeknek s az 1999/5/EK irnyelv, a 2006/95/EK irnyelv egyb elrsainak. Niniejszym TRENDnet owiadcza, e TEW-726EC jest zgodny z zasadniczymi wymogami oraz pozostaymi stosownymi postanowieniami Dyrektywy 1999/5/WE i 2006/95/WE. TRENDnet declara que este TEW-726EC est conforme com os requisitos essenciais e outras disposies da Directiva 1999/5/CE e 2006/95/CE. TRENDnet izjavlja, da je ta TEW-726EC v skladu z bistvenimi zahtevami in ostalimi relevantnimi doloili direktive 1999/5/ES in 2006/95/ES. TRENDnettmtovyhlasuje, e TEW-726ECspazkladnpoiadavky a vetkyprslunustanoveniaSmernice 1999/5/ES a 2006/95/ES. Suomi [Finnish]

TRENDnet vakuuttaa tten ett TEW-726EC tyyppinen laite on direktiivin 1999/5/EY ja 2006/95/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. Svenska

[Swedish]

Hrmed intygar TRENDnet att denna TEW-726EC str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG och 2006/95/EG. 23 TRENDnet Users Guide Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase. TEW-726EC 3 Years Warranty AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty. If a product does not operate as warranted during the applicable warranty period, TRENDnet shall reserve the right, at its expense, to repair or replace the defective product or part and deliver an equivalent product or part to the customer. The repair/replacement units warranty continues from the original date of purchase. All products that are replaced become the property of TRENDnet. Replacement products may be new or reconditioned. TRENDnet does not issue refunds or credit. Please contact the point-of-purchase for their return policies. TRENDnet shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to TRENDnet pursuant to any warranty. There are no user serviceable parts inside the product. Do not remove or attempt to service the product by any unauthorized service center. This warranty is voided if (i) the product has been modified or repaired by any unauthorized service center, (ii) the product was subject to accident, abuse, or improper use (iii) the product was subject to conditions more severe than those specified in the manual. Warranty service may be obtained by contacting TRENDnet within the applicable warranty period and providing a copy of the dated proof of the purchase. Upon proper submission of required documentation a Return Material Authorization (RMA) number will be issued. An RMA number is required in order to initiate warranty service support for all TRENDnet products. Products that are sent to TRENDnet for RMA service must have the RMA number marked on the outside of return packages and sent to TRENDnet prepaid, insured and packaged appropriately for safe shipment. Customers shipping from outside of the USA and Canada are responsible for return shipping fees. Customers shipping from outside of the USA are responsible for custom charges, including but not limited to, duty, tax, and other fees. WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, THE CUSTOMERS SOLE REMEDY SHALL BE, AT TRENDNETS OPTION, REPAIR OR REPLACE. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING Copyright 2013 TRENDnet. All Rights Reserved. Limited Warranty WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. TRENDNET NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION MAINTENANCE OR USE OF TRENDNETS PRODUCTS. TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMERS OR ANY THIRD PERSONS MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD. LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDNET ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT TRENDNETS OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE. Governing Law: This Limited Warranty shall be governed by the laws of the state of California. Some TRENDnet products include software code written by third party developers. These codes are subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). Go to http://www.trendnet.com/gpl or http://www.trendnet.com Download section and look for the desired TRENDnet product to access to the GPL Code or LGPL Code. These codes are distributed WITHOUT WARRANTY and are subject to the copyrights of the developers. TRENDnet does not provide technical support for these codes. Please go to http://www.gnu.org/licenses/gpl.txt or http://www.gnu.org/licenses/lgpl.txt for specific terms of each license. PWP05202009v2 2013/02/28 24