| submitted | available | document details (if available) | source link |
|---|---|---|---|
| May 08 2015 | June 08 2015 | PTSGI Adobe PDF Library 9.9 |
| various | Users Manual | Users Manual | 3.91 MiB | May 08 2015 / June 08 2015 |
Users Guide P W R L A N z H G 5 z H G 2 . 4 Dual Band Wireless Access Point TEW-821DAP TRENDnet Users Guide Table of Contents Product Overview ............................................................................5 Features .........................................................................................5 Package Content ............................................................................5 Hardware Overview .......................................................................6 Front View ................................................................................6 Rear View .................................................................................6 Wireless Considerations ................................................................7 Connection Performance ..........................................................7 Security Checklist ......................................................................7 Installation ......................................................................................8 Connect the Power ........................................................................8 Connect the Computer ..................................................................8 Check the Connections ..................................................................8 Ceiling Mounting ............................................................................9 Initial Setup ...................................................................................10 Configure the Computer ..............................................................10 Windows 7/8/8.1 ...................................................................10 Windows Vista ........................................................................10 Windows XP/2000 ..................................................................10 Log in to Management Page ........................................................10 Table of Contents Default Settings ......................................................................10 Access the Management Page ...............................................10 Setup Wizard ..........................................................................11 Save / Reload ..........................................................................12 Access Point Mode Management Page Structure ........................13 Client Bridge/AP Repeater Mode Management Page Structure ..13 Basic System Configurations ..........................................................14 Access Point Mode .......................................................................14 Configuring the Device as Access Point ..................................15 Using Access Point Mode........................................................15 Wireless Networking and Security..........................................17 Choose the Security Type for Wireless Network .....................18 Secure your Wireless Network................................................19 Connect Wireless Devices to your Access Point ......................20 Connect Wireless Devices using WPS .....................................20 Client Bridge Mode ......................................................................21 Configuring the Device as Client Bridge .................................22 Using Client Bridge Mode .......................................................22 Repeater Mode ............................................................................22 Configuring the Device as Repeater .......................................23 Using Repeater Mode .............................................................23 Wireless Distribution System (WDS) ............................................23 WDS Bridge ............................................................................23 Copyright 2015 TRENDnet. All Rights Reserved. 2 TRENDnet Users Guide Table of Contents Creating a WDS Bridge ...........................................................25 Using a WDS Bridge ...............................................................25 WDS Access Point ........................................................................26 Creating a WDS Access Point ..................................................26 Using a WDS Bridge ...............................................................26 WDS Station .................................................................................27 Creating a WDS Station ..........................................................28 Using a WDS Station ..............................................................28 View System Status .......................................................................28 System Information ......................................................................28 2.4G Wireless Client List ..............................................................29 5G Wireless Client List .................................................................29 System Log ...................................................................................30 Configure IP Settings ....................................................................30 Configure Spanning Tree ..............................................................31 Enable Band Steering ...................................................................31 IPv6 Settings .................................................................................32 Advanced System Configuration ....................................................33 Configure Wireless Network Settings ..........................................33 Basic Network Settings ...........................................................33 AP Detection ...........................................................................34 SSID Settings ...........................................................................34 Configure MAC Filter Settings ......................................................35 Configure Wireless Advanced Settings.........................................36 Connect Wireless Devices Using WPS ..........................................38 PBC (Software/Virtual Push Button) .......................................38 PIN (Personal Identification Number) .....................................39 Configure Management VLAN Settings ........................................39 Configure Traffic Shaping Settings ................................................40 Configure SNMP Settings .............................................................41 Management > SNMP Settings ....................................................41 Configure Schedule Settings ........................................................42 Create a Schedule ...................................................................42 Edit a Schedule .......................................................................43 Enable CLI ....................................................................................43 Management .................................................................................44 Change Login Password ...............................................................44 Modify Menu Timeout .................................................................44 Change Device Name ...................................................................45 Set Date and Time ........................................................................45 Configure LED Indicators ..............................................................46 Backup / Restore System Settings ................................................46 Update System Firmware .............................................................47 Configure System Log Server .......................................................47 Execute Diagnostics Test ..............................................................48 System Reboot .............................................................................49 Copyright 2015 TRENDnet. All Rights Reserved. 3 TRENDnet Users Guide Table of Contents SmartConsole ................................................................................49 Install the SmartConsole ..............................................................49 SmartConsole Overview ..............................................................50 Using the SmartConsole ..............................................................51 Appendix .......................................................................................52 Specifications ...............................................................................52 Federal Communication Commission Interference Statement ....54 Europe EU Declaration of Conformity .......................................54 Industry Canada Statement: ........................................................55 Limited Warranty .........................................................................56 Copyright 2015 TRENDnet. All Rights Reserved. 4 TRENDnet Users Guide Product Overview TRENDnets AC1200 Dual Band PoE Access Point, model TEW-821DAP, supports Access Point (AP), Wireless Distribution System (WDS) Bridge, AP + WDS, Client Bridge, and Repeater mode functionality. A convenient wireless scan feature streamlines the WDS setup process. Multiple SSIDs are supported for each band. The web-based management page allows you to configure your Access Point easily. Features Compatible with IEEE 802.11ac technology:
2TX/2RX wireless speed up to 866Mbps data rate Compatible with IEEE 802.11n high rate standard to provide wireless speed of 300Mbps data rate Compatible with IEEE 802.11g high rate standard to provide wireless speed of 54Mbps data rate Compatible with IEEE 802.3at PoE Simultaneously transmit both 2.4 GHz and 5 GHz wireless networks 1 x 10/100/1000Mbps Gigabit Ethernet port with PoE function Supports Multiple Input Multiple Output(MIMO) technology with 2TX/2RX(11a/b/
IEEE 802.11b/g/n/ac Infrastructure operating modes g/n/ac) Allow auto fallback data rate for optimized reliability, throughput and transmission range Supports wireless data encryption with 64/128-bit WEP standard for security Supports enhance security for WPA-PSK, WPA2-PSK, WPA and WPA2 Advance wireless security of up to WPA2-RADIUS Web-based configuration tools and management via WEB Browser Supports WPS (Wi-Fi Protected Setup Specification Windows) Supports statistics information Supports Wireless Distribution System (WDS) for wireless network bridging TEW-821DAP Package Content Check if your package contains the following items. If any item is missing or appears damaged, contact your dealer. P W R L A N z H G 5 z H G 2 . 4 Access Point Power Adapter (12V, 1A) RJ-45 Ethernet cable Quick Start Guide CD-ROM (Users Guide) Quick Start Guide Mounting kit
(incl. bracket + screws) Copyright 2015 TRENDnet. All Rights Reserved. 5 TRENDnet Users Guide Hardware Overview Front View TEW-821DAP Rear View m 2.4GHz 5GHz LAN PWR RESET DC IN LAN No. 1 Item 2.4G LED 2 3 4 5G LED LAN LED POWER LED j k l m Description The indicator turns on solid green when the wireless is enabled on your access point. This LED blinks green during data transmission. The indicator turns on solid green when the wireless is enabled on your access point. This LED blinks green during data transmission. The indicator turns on solid green when the wireless is enabled on your access point. This LED blinks green during data transmission. A solid green light indicates a proper connection to the power supply. j k l No. 1 Item Description Reset Button Use a sharp tool to press and hold this button for 10 seconds to 2 3 Power connector LAN Port 4 Mounting holes reset the access point. Connect the power adapter from your access point power port to an available power outlet. Connect the Ethernet cable (also called network cables) from your access point to your router and wired network devices. Attach the mounting plate here. Copyright 2015 TRENDnet. All Rights Reserved. 6 TRENDnet Users Guide Wireless Considerations Connection Performance A number of factors affect the performance of wireless connection. Consider the following guidelines to ensure high-range and stable connectivity. 9 Adjust your wireless devices so that the signal is traveling in a straight path, rather than at an angle. The more material the signal has to pass through the more signal you will lose. 9 Keep the number of obstructions to a minimum. Each obstruction can reduce the range of a wireless device. Position the wireless devices in a manner that will minimize the amount of obstructions between them. 9 Building materials can have a large impact on your wireless signal. In an indoor environment, try to position the wireless devices so that the signal passes through less dense material such as dry wall. Dense materials like metal, solid wood, glass or even furniture may block or degrade the signal. 9 Antenna orientation can also have a large impact on your wireless signal. Use the wireless adapters site survey tool to determine the best antenna orientation for your wireless devices. 9 Interference from devices that produce RF (radio frequency) noise can also impact your signal. Position your wireless devices away from anything that generates RF noise, such as microwaves, radios and baby monitors. 9 Any device operating on the 2.4GHz frequency will cause interference. Devices such as 2.4GHz cordless phones or other wireless remotes operating on the 2.4GHz frequency can potentially drop the wireless signal. Although the phone may not be in use, the base can still transmit wireless signal. Move the phones base station as far away as possible from your wireless devices. If you are still experiencing low or no signal consider repositioning the wireless devices or installing additional access points. The use of higher gain antennas may also provide the necessary coverage depending on the environment. TEW-821DAP Security Checklist Wireless networks are easy to install and convenient to use. However, wireless network signals can also be intercepted easily. To prevent unauthorized users from connecting to your wireless network, follow the guidelines below. 9 Change the default wireless network name Your device has a default Service Set Identifier (SSID) which is the wireless network name. Change the SSID with a unique name to identify your network. The SSID can be up to 32 characters in length. 9 Change the default password Your device has a default password. You have to enter this password to change your network settings. Change the password to prevent unauthorized users from hacking into your network and changing the settings. 9 Enable MAC address filtering Your device supports Media Access Control (MAC) address filtering. You can assign a MAC address on each computer that you want to connect to your wireless network. When MAC address filtering is enabled, only the computers with the specified MAC addresses are allowed access. 9 Enable encryption Your device supports Wired Equivalent Privacy (WEP), and Wi-Fi Protected Access
(WAP/WPA2) encryption. To ensure a high level of security, enable the highest security encryption and use strong passphrases, avoid using words that can be found in the dictionary. Copyright 2015 TRENDnet. All Rights Reserved. 7 TEW-821DAP Check the Connections To ensure that all devices are properly connected, check the LED indicators on the front of your access point. For basic installation, the following LED must be lit:
9 Power LED 9 LAN LED 9 2.4G LED 9 5G LED The lighted LED indicators vary depending on the type of connection that you make. Refer to Front View on page 6 for more information on LED indicators. TRENDnet Users Guide Installation Make sure that all devices are powered off before starting installation. Connect the Power 1 Connect the power adapter to the power port of your access point. 2 Plug the power adapter to a power outlet.
The access point powers up automatically. DC IN 2.4GHz 5GHz LAN PWR Note: Use only the supplied power adapter. Using other power adapters may cause damage to the device. Connect the Computer 1 Connect one end of the first RJ-45 cable to the Ethernet port of your access point. 2 Connect the other end of the first RJ-45 cable to the PoE switch. 3 Connect one end of the second RJ-45 cable to the PoE switch. 4 Connect the other end of the second RJ-45 cable to the LAN port of your computer. LAN 2.4GHz 5GHz LAN PWR TEW-821DAP PoE switch Computer Copyright 2015 TRENDnet. All Rights Reserved. 8 TRENDnet Users Guide TEW-821DAP Ceiling Mounting To ceiling mount the access point, do the following:
1 Drill three small holes on the mounting location and insert the plastic washers into the holes. 2 Then place the three supplied screws into the three holes at the ceiling bracket, and secure them into the holes on the ceiling. 3 Align and hook the TEW-821DAP to the ceiling bracket, and then push down to secure it into place. PWR LAN z H G 5 2.4GHz Copyright 2015 TRENDnet. All Rights Reserved. 9 TRENDnet Users Guide Initial Setup Configure the Computer Below are procedures on how to configure your computer according to the operating system you are using:
Windows 7/8/8.1 1 Click Start > Control Panel > Network and Sharing Center > Change Adapter Settings. 2 Right-click the Local Area Connection icon. 3 Click Properties. Then click Internet Protocol Version 4 (TCP/IPv4). 4 Select Use the following IP address. 5 Enter the required IP address and Subnet mask. 6 Click OK. Windows Vista 1 Click Start > Control Panel > Network and Internet > Manage Network Connections. 2 Right-click the Local Area Connection icon, and then click Properties. 3 Click Internet Protocol Version 4 (TCP/IPv4), and then click Properties. 4 Select Use the following IP address. 5 Enter the required IP address and Subnet mask. 6 Click OK. Windows XP/2000 1 Click Start > Control Panel. Then double-click the Network Connections icon. 2 Right-click the Local Area Connection icon, and then click Properties. 3 Click Internet Protocol (TCP/IP), and then click Properties. 4 Select Use the following IP address. 5 Enter the required IP address and Subnet mask. 6 Click OK. TEW-821DAP Log in to Management Page Default Settings Before accessing the web-based management page, configure the IP address and subnet mask of your computer to the following:
Management IP: 192.168.10.x Subnet mask: 255.255.255.0 Administrator name: admin Administrator password: admin Default SSID:
Default SSID passphrase:
(printed on pre-set label)
(printed on pre-set label) Access the Management Page 1 Open your web browser and do one of the following:
enter the URL/domain name http://tew-821dap, or enter the IP address http://192.168.10.100. 2 Enter the default user name and password, select your preferred language, and then click Login. The main screen appears. Copyright 2015 TRENDnet. All Rights Reserved. 10 TRENDnet Users Guide TEW-821DAP Note:
If you have changed the password in the Setup Wizard, you will need to login using the new password. User name and Password are case sensitive. Setup Wizard Setup wizard is provided as part of the web configuration utility. It sets up the basic administrator password and management IP address. 4 Enter your new administrator password and then click Next to continue. 1 Open your web browser (i.e. Internet Explorer, Firefox, Safari, Chrome, or Opera) and enter http://192.168.10.100. Your access point will prompt you for a user name and password. 5 TEW-821DAP will apply password change and the Local Area Network (LAN) Settings page opens. Note: You can also access the device using the following URL/domain name:
http://tew-821dap. 2 Enter the default user name and password, select your preferred language, and then click Login. Default User Name: Admin Default Password: admin 6 Set the Connection Type as STATIC. Enter the management IP address for this TEW-821DAP. The default IP address is 192.168.10.100. Set it up in your network management subnet with a unique IP address. You can leave it set on default IP if you have only one TEW-821DAP on network. Click Apply. Note: User name and Password are case sensitive. 3 Click System > Wizard. The following screen will appear. Copyright 2015 TRENDnet. All Rights Reserved. 11 TRENDnet Users Guide 7 Click Save & Apply. 8 TEW-821DAP will apply IP address change and then reboot. Login, using the new IP address and/or new password. TEW-821DAP Save / Reload The TEW-821DAP is a commercial grade wireless access point. To make multiple network settings change at the same time and minimum the interruption of production network, all network configurations have to be changed in two stages. When you change a network setting, the change command will be saved in a queue. When you finish all the setting changes, click Save & Apply. If you want to cancel the changes, click Revert. The number that follows Save/Reload is a reminder that shows how many changes are in the queue waiting to be applied. Copyright 2015 TRENDnet. All Rights Reserved. 12 TRENDnet Users Guide TEW-821DAP Access Point Mode Management Page Structure Status Main 2.4G Wireless Client List 5G Wireless Client List System Log System Wizard Operation Mode Spanning Tree Settings Band Steer IPv6 Settings IP Settings Wireless 2.4GHz Wireless Network Wireless MAC Filter Wireless Advanced Settings WPS Wireless 5GHz Wireless Network Wireless MAC Filter Wireless Advanced Settings WPS Client Bridge/AP Repeater Mode Management Page Structure Status Main 2.4G Wireless Client List 5G Wireless Client List System Log IP Settings System Wizard Operation Mode Spanning Tree Settings Band Steer IPv6 Settings Wireless 2.4GHz Wireless Network Wireless Advanced Settings Wireless 5GHz Wireless Network Wireless Advanced Settings Management Administration Management VLAN Wireless Traffic Shaping SNMP Settings Backup/Restore Settings Upload Firmware Time and Date Settings Schedule CLI Settings Log Diagnostics LED Control Management Administration Management VLAN Wireless Traffic Shaping SNMP Settings Backup/Restore Settings Upload Firmware Time and Date Settings Schedule CLI Settings Log Diagnostics LED Control Copyright 2015 TRENDnet. All Rights Reserved. 13 TRENDnet Users Guide Basic System Configurations There are four operating modes provided by TEW-821DAP, Access Point, Client Bridge, WDS and Repeater. Configure the TEW-821DAP to different operation mode which service the best in your network. Access Point Mode This is the default operation mode. TEW-821DAP service wireless end points in this mode. You can setup local or remote wireless authentication, setup up to 8 sets of SSIDs in 2.4GHz band and 5GHz band, total 16 SSIDs and separate SSID or STA traffic. Note: This device has dual band wireless capability allowing the access point to broadcast a wireless network name on two separate bands, 2.4GHz and 5GHz. Wireless clients can connect to your access on either band depending on the wireless band supported by your wireless client. The 2.4GHz band is more commonly used and supported for general applications such as Internet access and web browsing. The 5GHz band is less commonly used and supported which can be more useful for higher or stable bandwidth application requirements such as media streaming as this band may be less likely affected by neighboring wireless networks operating on the 5GHz band. TEW-821DAP Total 16 SSIDs (8 SSIDs per band) for different users grouping. Selectable SSID or station
(wireless client) isolation. Access Point 2.4GHz 5GHz LAN PWR Multiple SSID SSID/STA isolation Copyright 2015 TRENDnet. All Rights Reserved. 14 TRENDnet Users Guide TEW-821DAP Configuring the Device as Access Point System > Operation Mode Note: By default, the device function is set to Access Point mode. 1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 Click System > Operation Mode. 3 In Operation Mode section, select Access Point. Using Access Point Mode Wireless 2.4GHz or Wireless 5GHz > Wireless Network 1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 Configure the following settings, click Apply when finished. Wireless Mode: Choose between N only, G only, B only, B/G mixed, or B/G/N mixed mode. The rule of the thumb is to choose single mode if your devices all work in the same mode. Mixed mode increases compatibility, but sometimes lowers the data speed. 4 Click Apply to save changes. Note: To discard the changes, click Cancel. or Channel Width: Select the appropriate channel width for your wireless network. 20 MHz: This mode operates using a single 20MHz channel for wireless devices connecting at 802.11n on both 2.4GHz and 5GHz. This setting may provide more stability than Auto 20/40MHz for connectivity in busy wireless environments where there are several neighboring wireless networks in the area. Auto 20/40MHz: When Auto 20/40MHz is active, this mode is capable of providing higher performance only if the wireless devices support the channel bandwidth settings. Enabling Auto 20/40MHz typically results in substantial performance increases when connecting an 802.11n client. The 40 MHz channel width allows for twice the usable radio spectrum to transmit data, doubling performance compared to a normal 20 MHz channel width. Copyright 2015 TRENDnet. All Rights Reserved. 15 TRENDnet Users Guide TEW-821DAP Extension Channel: When you choose manual channel selection and 20/40MHz or 40MHz in channel width, you can choose which neighbour channel you want to combine, upper channel or lower channel, or auto to let the device to decide. Current Profile: General setups options for your 2.4GHz / 5GHz wireless connection. You can setup up to eight SSIDs for different groups of users. Do any of the following:
Click the Enable checkbox to enable the wireless profile. Click Edit to modify the settings and after modifications are done, click Apply. Channel (Frequency): If you want to setup fixed channel, choose a channel number to switch your radio frequency. Otherwise, check auto to select the channel automatically which is selected by default. (When you choose 20/40MHZ or 40MHz channel HT mode, the channel selection list is shorter. Four marginal channels are reserved for channel expansion.) or AP Detection: Before you setup your TEW-821DAP wireless settings, you may want to know what signal are currently broadcasting. Click Scan to do a site survey and list the running access points around you.
Wireless Settings:
SSID: Select the human readable SSID to be easily identified. You can choose any combination with 1 to 32 letters. Hide SSID: Select this checkbox to hide the SSID in the outgoing beacon frame so a station cannot obtain the SSID through scanning using a site survey tool. Separate Stations: If you enable station separation, wireless clients (a.k.a. STAs) associated with this SSID cannot communicate to each other directly even if they are in the same wireless group.
Wireless Security:
Security Mode: Choose between WEP-OPEN, WEP-SHARED, WEP-AUTO, WPA-
Personal, WPA2-Personal, WPA2-Personal Mixed, WPA-Enterprise, WPA2-
Enterprise Mixed. Please see more in Wireless Networking and Security on page 17. Copyright 2015 TRENDnet. All Rights Reserved. 16 TRENDnet Users Guide TEW-821DAP Wireless Networking and Security Tips to Improve Wireless Reception There are a number of factors that can impact the range of wireless devices. Follow these tips to help improve your wireless connectivity:
Keep the number of obstructions to a minimum. Each obstruction can reduce the range of a wireless device. Position the wireless devices in a manner that will minimize the amount of obstructions between them. 9 For the widest coverage area, install your access point near the center of your home, and near the ceiling, if possible. 9 Avoid placing the access point on or near metal objects (such as file cabinets and metal furniture), reflective surfaces (such as glass or mirrors), and masonry walls. 9 Any obstruction can weaken the wireless signal (even non-metallic objects), so the fewer obstructions between the access point and the wireless device, the better. 9 Place the access point in a location away from other electronics, motors, and fluorescent lighting. 9 Many environmental variables can affect the access points performance, so if your wireless signal is weak, place the access point in several locations and test the signal strength to determine the ideal position. Building materials can have a large impact on your wireless signal. In an indoor environment, try to position the wireless devices so that the signal passes through less dense material such as dry wall. Dense materials like metal, solid wood, glass or even furniture may block or degrade the signal. Antenna orientation can also have a large impact on your wireless signal. Use the wireless adapters site survey tool to determine the best antenna orientation for your wireless devices. Interference from devices that produce RF (radio frequency) noise can also impact your signal. Position your wireless devices away from anything that generates RF noise, such as microwaves, radios and baby monitors. If possible, upgrade wireless network interfaces (such as wireless cards in computers) from older wireless standards to 802.11n or 802.11ac. If a wirelessly networked device uses an older standard, the performance of the entire wireless network may be slower. If you are still experiencing low or no signal consider repositioning the wireless devices, installing additional access points or wireless extenders. Copyright 2015 TRENDnet. All Rights Reserved. 17 TRENDnet Users Guide TEW-821DAP Choose the Security Type for Wireless Network Setting up wireless security is very important. Leaving your wireless network open and unsecure could expose your entire network and personal files to outsiders. TRENDnet recommends reading through this entire section and setting up wireless security on your new access point. There are a few different wireless security types supported in wireless networking each having its own characteristics which may be more suitable for your wireless network taking into consideration compatibility, performance, as well as the security strength along with using older wireless networking hardware (also called legacy hardware). It is strongly recommended to enable wireless security to prevent unwanted users from accessing your network and network resources (personal documents, media, etc.). In general, it is recommended that you choose the security type with the highest strength and performance supported by the wireless computers and devices in your network. Please review the security types to determine which one you should use for your network. Wireless Encryption Types WEP: Legacy encryption method supported by older 802.11b/g hardware. This is the oldest and least secure type of wireless encryption. It is generally not recommended to use this encryption standard, however if you have old 802.11 b or 802.11g wireless adapters or computers with old embedded wireless cards(wireless clients), you may have to set your access point to WEP to allow the old adapters to connect to the access point. Note:
This encryption standard will limit connection speeds to 54Mbps. WPA: This encryption is significantly more robust than the WEP technology. Much of the older 802.11g hardware was been upgraded (with firmware/driver upgrades) to support this encryption standard. Total wireless speeds under this encryption type however are limited to 54Mbps. WPA-Auto: This setting provides the access point with the ability to detect wireless devices using either WPA or WPA2 encryption. Your wireless network will automatically change the encryption setting based on the first wireless device connected. For example, if the first wireless client that connects to your wireless network uses WPA encryption your wireless network will use WPA encryption. Only when all wireless clients disconnect to the network and a wireless client with WPA2 encryption connects your wireless network will then change to WPA2 encryption. Note:
WPA2 encryption supports 802.11n speeds and WPA encryption will limit your connection speeds to 54Mbps. WPA2: This is the most secure wireless encryption available today, similar to WPA encryption but more robust. This encryption standard also supports the highest connection speeds. TRENDnet recommends setting your access point to this encryption standard. If you find that one of your wireless network devices does not support WPA2 encryption, then set your access point to either WPA or WPA-Auto encryption. Note:
Check the specifications of your wireless network adapters and wireless appliances to verify the highest level of encryption supported.Below is brief comparison chart of the wireless security types and the recommended configuration depending on which type you choose for your wireless network. WEP WPA WPA2 IEEE 802.11a/b/g
(802.11n devices will operate at 802.11g to connect using this standard) Up to 54Mbps IEEE 802.11a/b/g
(802.11n devices will operate at 802.11g to connect using this standard) Up to 54Mbps IEEE 802.11a/b/g/n Up to 300Mbps Security Standard Compatible Wireless Standards Highest Performance Under This Setting Encryption Strength Additional Options Medium TKIP or AES, Preshared Key or RADIUS High TKIP or AES, Preshared Key or RADIUS Low Open System or Shared Key, HEX or ASCII, Different key sizes Open System ASCII 13 characters Recommended Configuration AES Preshared Key 8-63 characters
* Dependent on the maximum 802.11n data rate supported by the device (150Mbps, 300Mbps) TKIP Preshared Key 8-63 characters Copyright 2015 TRENDnet. All Rights Reserved. 18 TRENDnet Users Guide TEW-821DAP Secure your Wireless Network Wireless 2.4GHz or Wireless 5GHz > Wireless Network After you have determined which security type to use for your wireless network (refer to Choose the Security Type for Wireless Network on page 18), you can set up wireless security. Note: By default, your access point is configured with a predefined wireless network name (SSID) and security key using WPA-Personal. The predefined wireless network name and security can be found on the sticker on the side of the access point or on the device label at the bottom of the access point. 1 Log into your access point management page (refer to Log in to Management Page 2 In Current Profile section, click Edit next to the wireless profile to select the wireless on page 10). security type. 3 In Wireless Security section, select the preferred Security Mode:
Select between WPA-OPEN, WPA-SHARED, or WPA-AUTO. WPA-OPEN system allows any client to authenticate as long as it conforms to any MAC address filter policies that may have been set. All authentication packets are transmitted without encryption. WPA-SHARED Key sends an unencrypted challenge text string to any device attempting to communicate with the AP. The device requesting authentication encrypts the challenge text and sends it back to the access point. If the challenge text is encrypted correctly, the access point allows the requesting device to authenticate. It is recommended to select WPA-AUTO if you are not sure which authentication type is used. Click Apply to save the changes. Default Key: You may choose one of your four different WEP keys from below. WEP Key 1 to 4: Enter the WEP key. This is the password or key that is used to connect your computer to this access point wirelessly. You can enter four different WEP keys. HEX / ASCII: Select your key format to be in hexadecimal or ASCII codes. Keys are defined by entering in a string in HEX (hexadecimal - using characters 0-9, A-F) or ASCII (American Standard Code for Information Interchange -
alphanumeric characters) format. ASCII format is provided so you can enter a string that is easier to remember. If the security type is set to WPA-Personal, review the WPA-Personal settings to configure and click Apply to save the changes. Security Mode: Select the WPA security type. WPA Cipher: Select the encryption algorithm used to secure the data communication. TKIP (Temporal Key Integrity Protocol) provides per-packet key generation and is based on WEP. AES (Advanced Encryption Standard) is a very secure block based encryption. With the TKIP and AES option, the device negotiates the cipher type with the client, and uses AES when available. Copyright 2015 TRENDnet. All Rights Reserved. 19 TRENDnet Users Guide TEW-821DAP If the security type is set to WPA-Enterprise, review the WPA-Enterprise settings to configure and click Apply to save the changes. This security type is also known as EAP (Extensible Authentication Protocol) or Remote Authentication Dial-In User Service or RADIUS. Note: This security type requires an external RADIUS server, Shared Secret only requires you to create a passphrase. Key Update Interval: Specify how often the wireless key should be renegotiated. Shorter time intervals are more secure, but cause more overhead.(Default: 3600 seconds/ 1 hour). IP Address: Enter the IP address of the RADIUS server. (i.e. 192.168.10.250) Port: Enter the port your RADIUS server is configured to use for RADIUS authentication. Note: It is recommended to use port 1812 which is typical default RADIUS port. Shared Secret: Enter the shared secret used to authorize your access point with your RADIUS server. Internet enabled TVs Connect Wireless Devices to your Access Point A variety of wireless network devices can connect to your wireless network such as:
Gaming Consoles Network media players Smart Phones Wireless Laptop computers Wireless IP cameras Each device may have its own software utility for searching and connecting to available wireless networks, therefore, you must refer to the Users Manual/Guide of your wireless client device to determine how to search and connect to this access points wireless network. Connect Wireless Devices using WPS WPS (Wi-Fi Protected Setup) is a feature that makes it easy to connect devices to your wireless network. If your wireless devices support WPS, you can use this feature to easily add wireless devices to your network. Note: You will not be able to use WPS if you set the SSID Broadcast setting to Disabled or if you are using WEP security. Please note that WPS functionality will only be available when the Device Mode is set to Access Point mode under Main > Device Mode. There are two methods the WPS feature can easily connect your wireless devices to your network. Push Button Configuration (PBC) method (PBC (Software/Virtual Push Button) on page 38). PIN (Personal Identification Number) method (PIN (Personal Identification Number) on page 39). Note: Refer to your wireless device documentation for details on the operation of WPS. Copyright 2015 TRENDnet. All Rights Reserved. 20 TRENDnet Users Guide TEW-821DAP Client Bridge Mode Client Bridge mode allows the device to act as a wireless client device to connect to your wireless network and bridge the wireless connection from the wireless network to the LAN port located on the back of the device. Client devices with wired network capability such as in a media or entertainment center (ex. Smart TV, Game Console, DVR, etc.) can connect to the LAN port using an Ethernet cable to establish wired connectivity to your network. When using this mode, please note that Client Bridge mode can only function using one band at a time, 2.4GHz or 5GHz and other modes cannot be used simultaneously. Connects to any 802.11 wireless AP. Connects two networks wirelessly 2.4GHz 5GHz LAN PWR Client Bridge Copyright 2015 TRENDnet. All Rights Reserved. 21 TRENDnet Users Guide TEW-821DAP Repeater Mode When Repeater Mode is selected, the selected wireless interface functions as a wireless repeater and is able to repeat the wireless signal of an access point. This feature is used to expand your existing wireless network on places your current access point is unable to reach. Make sure all the settings on selected interface of the TEW-821DAP matches the wireless access points you want to repeat in same wireless settings including SSID, channel and wireless encryption settings. Repeater 2.4GHz 5GHz LAN PWR Configuring the Device as Client Bridge System > Operation Mode 1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 Click System > Operation Mode. 3 In Operation Mode section, select Client Bridge. Note: In the following example the Client Bridge mode is selected for 2.4GHz wireless profile. 4 To save changes, click Apply. Note: To discard the changes, click Cancel. Using Client Bridge Mode Wireless 2.4GHz or Wireless 5GHz > Wireless Network 1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 In Wireless 2.4GHz or Wireless 5GHz > Wireless Network > SSID section, specify the static SSID manually or click Wireless 2.4GHz or Wireless 5GHz > Wireless Network >
Site Survey. 3 The available networks are listed. Select a network to connect to. Note: If you are unable to find your wireless network in the list, click Refresh to rescan for the available networks. 4 Click on the SSID field to connect to the selected wireless network. 5 Click Apply to save the wireless network. Copyright 2015 TRENDnet. All Rights Reserved. 22 TRENDnet Users Guide TEW-821DAP Configuring the Device as Repeater System > Operation Mode 1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 Click System > Operation Mode. 3 In Operation Mode section, select Repeater. 4 Click Apply to save changes or Cancel to discard the changes. Using Repeater Mode Wireless 2.4GHz or Wireless 5GHz > Wireless Network 1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 In Wireless 2.4GHz or Wireless 5GHz > Wireless Network > SSID section, specify the static SSID manually or click Wireless 2.4GHz or Wireless 5GHz > Wireless Network >
Site Survey. 3 The available networks are listed. Select a network to connect to. Note: If you are unable to find your wireless network in the list, click Refresh to rescan for the available networks. 4 Click on the SSID field to connect to the selected wireless network. 5 Click Apply to save the wireless network. Wireless Distribution System (WDS) IMPORTANT: Deploy ONLY multiple TEW-821DAPs in a single DS (distribution system). WDS may not work with other products due to its non-standard nature. WDS stands for Wireless Distribution System, a non-standard extension to the IEEE 802.11 standard to allow transparent Ethernet bridging on the station and to implement seamingless hand-over for wireless clients roaming between different access points. WDS links create transparent bridges facilitate layer 2 seamless communication. You dont have to use WDS if you dont need layer 2 services passing through TEW-821DAP, such as MAC filtering, and 802.1X authentication. You can simply use AP, Client Bridge, and Repeater mode to fit most of your network plan. The 802.11 standard only uses three MAC addresses for frames transmitted between the Access Point and the Station. Frames transmitted from the station to the AP dont include the Ethernet source MAC address of the requesting host and response frames are missing the destination Ethernet MAC to address the target host behind the client bridge. WDS AP and WDS Station uses the 4 MAC address including complete source, destination, WDS AP, and WDS Station addresses. Data frame arriving WDS AP or WDS Station will be translated back to 802.3 data frame with real source address instead of WDS AP or WDS Station address. The 4 addresses design keeps the original data frame intact bridging to the other side transparently. You have to use multiple TEW-821DAPs to build WDS AP - WDS Station pair or WDS bridge mesh groups. Different model with same or different brand name may NOT work together because of the different WDS implementation details. WDS Bridge In this mode, the selected interface wirelessly communicate to other WDS bridges to make a wireless backbone. You can make a simple mesh network with these WDS bridges. To build a WDS link, you have to list the neighbors BSSID (the MAC address) as next hop packet forwarding. Your neig, vice versa, has to list your BSSID (the MAC Address) as its next hop. Make sure all access points are configured with the same SSID as a single DS (distribution system), wireless channel and wireless encryption settings have to be the same as well. Copyright 2015 TRENDnet. All Rights Reserved. 23 TRENDnet Users Guide TEW-821DAP 2.4GHz 5GHz LAN PWR WDS Bridge 2.4GHz 5GHz LAN PWR WWW 2.4GHz 5GHz LAN PWR 2.4GHz 5GHz LAN PWR 2.4GHz 5GHz LAN PWR Wireless Distribution System Copyright 2015 TRENDnet. All Rights Reserved. 24 TRENDnet Users Guide TEW-821DAP Creating a WDS Bridge System > Operation Mode Note: By default, your access point is configured with a predefined wireless network name (SSID) and security key using WPA-Personal. The predefined wireless network name and security can be found on the sticker on the side of the access point or on the device label at the bottom of the access point. To configure a WDS bridge between two TEW-821DAP access points:
Make note of the wireless MAC address of both access points. Refer to System Information on page 28 for checking the status page. Note: Please note that 2.4GHz and 5GHz bands will have two different MAC addresses. If using the 2.4GHz band wireless MAC address, please use the 2.4GHz wireless MAC address for all other WDS supported devices to bridge and if using the 5GHz band wireless MAC address, use the 5GHz wireless MAC address for all other WDS supported devices to bridge. Make sure the IP address on each WDS supported access is point is different and on the same IP network/subnet. Please refer to Configure IP Settings on page 30 for changing access point IP address. 1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 Click System > Operation Mode. 3 On Operation Mode section, select WDS Bridge. Using a WDS Bridge Wireless 2.4GHz or Wireless 5GHz > WDS Link Settings 1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 In Wireless 2.4GHz or Wireless 5GHz > Wireless Link Settings > Remote AP MAC Address section, do on of the following:
Specify the remote AP MAC address manually, and click Apply or Click Wireless 2.4GHz or Wireless 5GHz > Wireless Link Settings > Site Survey. 3 The available networks are listed. Select a network to connect to. 4 Click Apply to save changes or Cancel to discard the changes. Note: If you are unable to find your wireless network in the list, click Refresh to rescan for the available networks. 4 Click on the SSID field to connect to the selected wireless network. 5 Click Apply to save the wireless network. Copyright 2015 TRENDnet. All Rights Reserved. 25 TRENDnet Users Guide TEW-821DAP WDS Access Point WDS AP is an outlet of a DS. Pairing with a WDS Station you can build a transparent bridge between two DS or from DS to STA. Creating a WDS Access Point System > Operation Mode 1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 Click System > Operation Mode. 3 On Operation Mode section, select WDS Access Point. 3 The available networks are listed. Select a network to connect to. Note: If you are unable to find your wireless network in the list, click Refresh to rescan for the available networks. 4 Click on the SSID field to connect to the selected wireless network. 5 Click Apply to save the wireless network. 4 Click Apply to save changes or Cancel to discard the changes. Using a WDS Bridge Wireless 2.4GHz or Wireless 5GHz > WDS Link Settings 1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 In Wireless 2.4GHz or Wireless 5GHz > Wireless Link Settings > Remote AP MAC Address section, do one of the following:
Specify the remote AP MAC address manually and click Apply or Click Wireless 2.4GHz or Wireless 5GHz > Wireless Link Settings > Site Survey. Copyright 2015 TRENDnet. All Rights Reserved. 26 TRENDnet Users Guide WDS Station Pair with WDS AP, you can build a transparent bridge for layer 2 requirements. TEW-821DAP WDS AP WDS Station 2.4GHz 5GHz LAN PWR 2.4GHz 5GHz LAN PWR Transparent Bridge Copyright 2015 TRENDnet. All Rights Reserved. 27 TRENDnet Users Guide TEW-821DAP Creating a WDS Station System > Operation Mode 1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 Click System > Operation Mode. 3 On Operation Mode section, select WDS station. 4 Click Apply to save changes or Cancel to discard the changes. View System Status System Information Status > Main View the device information, and LAN and Wireless LAN configuration. 1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 Click Status > Main. Using a WDS Station Wireless 2.4GHz or Wireless 5GHz > Wireless Network 1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 In Wireless 2.4GHz or Wireless 5GHz > Wireless Network > SSID section, do one of the following:
Specify the static SSID manually and click Apply or Click Wireless 2.4GHz or Wireless 5GHz > Wireless Network > Site Survey. 3 The available networks are listed. Select a network to connect to. Note: If you are unable to find your wireless network in the list, click Refresh to rescan for the available networks. 4 Click on the SSID field to connect to the selected wireless network. 5 Click Apply to save the wireless network. In the System Info section:
Device Name: Display name of this device that is recognized by other network devices such as SNMP. Firmware Version: Display currently run firmware version. System Time: Display the current time is important for schedule control and log accuracy. System Up Time: Display how long the system has been running without reboot. Copyright 2015 TRENDnet. All Rights Reserved. 28 TRENDnet Users Guide TEW-821DAP In the Network section:
MAC Address: Display the MAC address of the access point. IP Address: Display address of the TEW-821DAP. Subnet Mask: Display network range of IP address. Default Gateway: Display the default route going further from TEW-821DAP subnet. Primary Domain Name Server: Display primary domain server address. Secondary Domain Name Server: Display secondary domain server address. 2.4G Wireless Client List Status > 2.4G Wireless Client List To view all wireless clients connected to the 2.4GHz interface, do the following:
1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 Click Status > 2.4G Wireless Client List.
The list of connected wireless clients is displayed on the screen. 3 Click Kick and Ban to send this client to MAC address filter list. 5G Wireless Client List Status > 5G Wireless Client List To view all wireless clients connected to the 5GHz interface, do the following:
1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 Click Status > 5G Wireless Client List.
The list of connected wireless clients is displayed on the screen. 3 Click Kick and Ban to send this client to MAC address filter list. On the 2.4GHz / 5GHz Wireless section:
Operation Mode: Display which wireless mode the 2.4GHz / 5GHz interface is set to. Wireless Mode: Display which 802.11 wireless mode is set and running on the 2.4GHz / 5GHz interface. Channel Width: Wireless Channel Bandwidth. Channel (Frequency): Display which 2.4GHz / 5GHz wireless channel (and frequency) is in use. SSID List: Display information on SSID, MAC address, and security mode. Copyright 2015 TRENDnet. All Rights Reserved. 29 TRENDnet Users Guide TEW-821DAP System Log Status > System Log To view a running log of the access points system statistics, events and activities, do the following:
1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 Click Status > System Log. Configure IP Settings Status > IP Settings The TEW-821DAP has a static IP (192.168.10.100) set for management purposes. You can change this IP address to fit your network plan or manage multiple TRENDnet access points. You can also set the TEW-821DAP to DHCP client to accept an IP dynamically. Note: You can change the IP settings also using the System > Wizard menu. To start changing the IP settings, do the following:
1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 Click System > IP Settings.
3 Modify the following LAN Connection Type field:
Connection Type: Choose one of the following:
Static to manually configure the IP address settings of the access point. DHCP to set the access point to automatically obtain IP address settings from a DHCP server. 4 Modify any of the following LAN Interface Setting fields:
IP Address: Specify an IP address. Subnet Mask: Specify a subnet mask for the IP address. Default Gateway: Default route for the TEW-821DAP. 5 Click Apply to save the LAN settings or Cancel to discard the changes. Copyright 2015 TRENDnet. All Rights Reserved. 30 TRENDnet Users Guide TEW-821DAP Configure Spanning Tree System > Spanning Tree Settings The TEW-821DAP is designed for end point access as well as backbone connection. To avoid network looping, you can enable 802.1d spanning tree protocol. To configure the spanning tree, do the following:
1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 Click System > Spanning Tree Settings.
3 Modify any of the following Spanning Tree Settings fields:
Spanning Tree Status: Enable or disable 802.1d spanning tree protocol to avoid network looping. Enable Band Steering System > Band Steer In the office, the 2.4GHz is always crowded than 5GHz. There are fewer non-overlapping channels and more legacy devices in 2.4GHz compare to the 5GHz band. The TEW-
753DAP is equipped with 2.4GHz and 5GHz wireless interfaces. When your client device can work on both 2.4GHz and 5GHz wireless, Band Steer will choose 5GHz as primary band over 2.4GHz. Traffic will mainly stays on 5GHz in stead of 2.4GHz. To setup band steer, you have to setup the same SSIDs on both the 2.4GHz and the 5GHz interfaces. To enable Band Steering, do the following:
1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 Click System > Band Steer.
3 Check Enable option to allow band steering. 4 Click Save to save the setting or Cancel to discard the changes. Bridge Hello Time: The time between each bridge protocol data unit (BPDU). Default: 2 sec. Bridge Max Age: Maximum time a BPDU kept in bridge. Default: 20 sec. Bridge Forward Delay: The time to be spent in listen and learning state. Default: 4 sec. Priority: Priority number for root bridge selection. (MAC number is listed on Status > Main menu). 4 Click Apply to save the spanning tree settings or Cancel to discard the changes. Copyright 2015 TRENDnet. All Rights Reserved. 31 TRENDnet Users Guide TEW-821DAP IPv6 Settings System > IPv6 Settings Use this section if you are connecting this device to an IPv6 network and require this device to use IPv6 addressing. IPv6 is a updated IP addressing protocol which offers advanced capabilities and improvements over the more commonly used IP address standard (IPv4). 1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 Click System > IPv6 Settings. 3 Select the mode to be used by the access point to connect to an IPv6 network. Link-Local Only: The link-local address is used to communicate to neighboring IPv6 capable network devices that are connected to the same network segment. This is similar to the function automatic network IP addressing (APIPA) if a device cannot pull IPv4 address settings automatically from a network DHCP server. Static IPv6: Use this option to manually configure the IPv6 address settings of the device for connectivity to your IPv6 network. Configure the following settings:
LAN IPv6 Address: Enter the static IPv6 address to assign to your device (i.e. 1234:5678:90ab:cdef::a or 1234:5678:90ab:cdef:0000:0000:0000:000a). Subnet Prefix Length: Enter the IPv6 subnet prefix length(1-128, 64 is typically the standard prefix). Default Gateway: Enter the IPv6 default gateway address (i.e. 1234:5678:90ab:cdef::1 or 1234:5678:90ab:cdef:0000:0000:0000:0001). Primary DNS Server: Enter the primary IPv6 DNS server address (i.e. 1234:5678:90ab:cdef::1 or 1234:5678:90ab:cdef:0000:0000:0000:0001, 2001:4860:4860::8888 2001:4860:4860::8844). Secondary DNS Server: Enter the secondary IPv6 DNS server address (i.e. 1234:5678:90ab:cdef::1 or 1234:5678:90ab:cdef:0000:0000:0000:0001, 2001:4860:4860::8888 2001:4860:4860::8844). Autoconfiguration (SLAAC)/DHCPv6): Use this option to configure the device to obtain IPv6 address settings automatically from a DHCPv6 server on your network. Configure the following settings:
Obtain IPv6 DNS server address automatically: Select this option to configure the device to obtain the IPv6 DNS server addresses automatically from the DHCPv6 server on your network. Use the following IPv6 DNS Servers: Select this option to manually configure which IPv6 DNS server addresses the device will use. 4 Click Apply to save changes or Cancel to discard the changes. Copyright 2015 TRENDnet. All Rights Reserved. 32 TRENDnet Users Guide TEW-821DAP Advanced System Configuration 5 Select the extension channel. This section will guide you through configuring several advanced settings. Configure Wireless Network Settings Basic Network Settings Wireless 2.4GHz > Wireless Network General setups options for your 2.4GHz wireless connection. You can setup up to eight SSIDs for different groups of users. To configure the basic network settings, do the following:
1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 Click Wireless 2.4GHz > Wireless Network. 3 Select the network mode. Note: Choose between N only, G only, B only, B/G mixed, G/N mixed, or B/G/N mixed mode. The rule of the thumb is to choose single mode if your devices all work in the same mode. Mixed mode increases compatibility, but sometimes lowers the data speed. 4 Select the channel width. Note: The latest 802.11 protocol can combine channels for better wireless performance. You can choose fixed 20MHz or 40MHz, or automatically select 20MHz or 40MHz channels. Note: When you choose manual channel selection and 20/40MHz or 40MHz in channel HT mode, you can choose which neighbor channel you want to combine, upper channel or lower channel. 6 Select the channel frequency. Note: If you want to setup fixed channel, choose a channel number to switch your radio frequency. Otherwise, check auto to select the channel automatically which is selected by default. (When you choose 20/40MHZ or 40MHz channel HT mode, the channel selection list is shorter. Four marginal channels are reserved for channel expansion.) 7 Click Apply to save the changes or Cancel to discard the changes. Copyright 2015 TRENDnet. All Rights Reserved. 33 TRENDnet Users Guide TEW-821DAP AP Detection Wireless 2.4GHz > Wireless Network Before you setup your TEW-821DAP wireless settings, you may want to know what signal are currently broadcasting. To view the site survey and list the running access points around you, do the following:
1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 Click Wireless 2.4GHz > Wireless Network. 3 Click Scan next to the AP Detection field. SSID Settings Wireless 2.4GHz > Wireless Network To configure the SSID settings, do the following:
1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 Click Wireless 2.4GHz > Wireless Network. 3 Select the profile from Current Profile section and click Edit next to the profile.
The site survey page opens.
The SSID profile page opens.
In site survey you can see the following information:
SSID: Service Set Identifier. This SSID is human readable and performs as ESSID to setup wireless groups. BSSID: Basic SSID. This is strictly unique SSID to identify a wireless access point, WAP. It is also the MAC address of the wireless interface. Channel: 2.4GHz wireless channel number. Signal Level: The signal strength from the access point. Type: The 802.11 wireless mode this access point provides. Security: Which wireless security was set to use. Mode: This wireless source works on infrastructure mode or ad hoc mode. 4 Click Refresh to renew the information. 4 Modify the following parameters:
SSID: Select the human readable SSID to be easily identified. You can choose any combination with 1 to 32 letters . Copyright 2015 TRENDnet. All Rights Reserved. 34 Hide SSID: Check this box to hide SSID broadcasting. Your wireless network name is broadcast to anyone within wireless signal range. When this is box is checked,
TRENDnet Users Guide TEW-821DAP you must enter the Wireless Network Name (SSID) on the client manually to connect to the network. Separate Stations: If you enable station separation, wireless clients (a.k.a. STAs) associated with this SSID cannot communicate to each other directly even if they are in the same wireless group. Security Mode: Please refer to 5 Click Apply to save the SSID information. Configure MAC Filter Settings Wireless 2.4GHz > Wireless MAC Filter Every network device has a unique, 12-digit MAC (Media Access Control) address. Using MAC filters, you can allow or deny specific computers and other devices from using this access points wireless network. You can enter up to 24 MAC address entries. 1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 Click Wireless 2.4GHz > Wireless Network. 3 On Filter Mode below, select one of the MAC filter function. Disable: Select this option to disable the MAC address filter. ALLOW listed computers access and deny all others: Select this option to only allow computers/devices with MAC addresses listed to access the access point management page and the Internet. Deny all others. DENY listed computers access and allow all others: Select this option to only deny computers/devices with MAC addresses listed to access to the access point management page and the Internet. Allow all others. Note: MAC filter can be configured to allow access to the listed MAC address and deny all others unlisted or vice versa. The recommended function is to choose to only allow access to the MAC addresses listed and deny all others unlisted because it is easier to determine the MAC addresses of devices in your network then to determine which MAC addresses you do not want to allow access. Copyright 2015 TRENDnet. All Rights Reserved. 35 TRENDnet Users Guide TEW-821DAP 4 Enter the MAC address you wish to allow or deny depending on the Filter Mode option. The MAC address needs to be filled in in the hexadecimal format. For example, 00:11:22:33:44:55. You can review the added MAC addresses in MAC Filter List table. Note: To remove the MAC address from the MAC Filter List, click Delete next to the chosen MAC address. 5 Click Apply to save the changes or Cancel to discard the settings. Configure Wireless Advanced Settings Wireless 2.4GHz > Wireless Advanced Settings Fine tune your wireless settings on this page. 1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 Click Wireless 2.4GHz > Wireless Advanced Settings. 3 In Advanced Wireless section, modify any of the following parameters:
Data Rate: Choose a fixed data rate for 802.11b and g mode and MCS number for 802.11n, or choose Auto for automatic rate adapting. The default setting is Auto. Copyright 2015 TRENDnet. All Rights Reserved. 36
TRENDnet Users Guide TEW-821DAP Transmit Power: Wireless signal transmission power. Setting transmission power to an appropriate value can make your multiple AP deployment easier. The default value is 18 dBm. Valid settings are between 11 and 18 (both FCC and CE). Short Preamble: Disable this feature if you do not want the access point to use it at data transfer. 4 In HD Physical Mode section, modify any of the following parameters:
Guard Interval: Using a short (400ns) guard interval can increase throughput. However, it can also increase error rate in some installations, due to increased sensitivity to radio-frequency reflections. Select the option between Auto and Long that works best for your installation. A-MPDU: MPDU aggregation also collects Ethernet frames to be transmitted to a single destination, but it wraps each frame in an 802.11n MAC header. Normally this is less efficient than MSDU aggregation, but it may be more efficient in environments with high error rates, because of a mechanism called block acknowledgement. This mechanism allows each of the aggregated data frames to be individually acknowledged or retransmitted if affected by an error 5 In Client Limit section, check Enable if you want to limit the number of clients and set the maximum number of clients that can connect to TEW-821DAP. If you do not want to use this feature, check Disable. RTC/CTS Threshold: Packets over the specified size will use the RTS/CTS mechanism to maintain performance in noisy networks and to prevent hidden nodes from degrading the performance. Specify a value between 1 and 2346. The default value is 2346. Beacon Period: Beacons are packets sent by the access point to synchronize wireless devices. Specify a Beacon Period value between 100 and 1000. The default value is set to 100 milliseconds. DTIM: A DTIM is a countdown informing clients of the next window for listening to broadcast and multicast messages. When the access point has buffered broadcast or multicast messages for associated clients, it sends the next DTIM with a DTIM Interval value. Wireless clients detect the beacons and awaken to receive the broadcast and multicast messages. The default value is 1. Valid settings are between 1 and 255. Fragment Threshold: This setting should remain at its default value of 2346. Setting the Fragmentation value too low may result in poor performance. Copyright 2015 TRENDnet. All Rights Reserved. 37 TRENDnet Users Guide TEW-821DAP Connect Wireless Devices Using WPS WPS (Wi-Fi Protected Setup) is a feature that makes it easy to connect devices to your wireless network. If your wireless devices support WPS, you can use this feature to easily add wireless devices to your network. Note: You will not be able to use WPS if you set the SSID Broadcast setting to Disabled or if you are using WEP security. Please note that WPS functionality will only be available when the Device Mode is set to Access Point mode under Main > Device Mode. There are two methods the WPS feature can easily connect your wireless devices to your network. Push Button Configuration (PBC) method PIN (Personal Identification Number) method Note: Refer to your wireless device documentation for details on the operation of WPS. PBC (Software/Virtual Push Button) Wireless 2.4GHz > WPS 1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 Click Wireless 2.4GHz > WPS. 3 In WPS Config section enable the WPS feature. 4 Enable or disable the WPS External Registrar Lock. 5 In the WPS Action section, click Start Push Button to add a wireless device to your network. 6 Wait for your access point to finish the WPS process.
The procedure is complete when the WPS Current Status in WPS Summary section becomes Idle. Copyright 2015 TRENDnet. All Rights Reserved. 38 TRENDnet Users Guide TEW-821DAP PIN (Personal Identification Number) Wireless 2.4GHz > WPS 1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 Click Wireless 2.4GHz > WPS. 3 In WPS Config section enable the WPS feature. 4 Enable or disable the WPS External Registrar Lock. Configure Management VLAN Settings Management > Management VLAN This feature is only available under Access Point or WDS AP mode and allows users to configure the 802.1q VLAN settings to for all wireless clients. A VLAN is a group of computers on a network whose software has been configured so that they behave as if they were on a separate Local Area Network (LAN). Computers on VLAN do not have to be physically located next to one another on the LAN. To configure the management VLAN settings, do the following:
1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 Click Management > Management VLAN. 5 In the WPS Action section, enter the 8-digit pin number and click Start Push Button to add a wireless device to your network. Note: The PIN number is listed in WPS Summary > AP PIN. 6 Wait for your access point to finish the WPS process.
The procedure is complete when the WPS Current Status in WPS Summary section becomes back Idle. Copyright 2015 TRENDnet. All Rights Reserved. 39 TRENDnet Users Guide TEW-821DAP 3 Configure or view any of the following parameters:
Enable: Redundant control to enable or disable the particular SSID. VID: Virtual LAN ID. No VLAN tag: Management VLAN packets are not tagged by default. Specified VLAN ID: Select this if you want to separate the management VLAN. Enabling tagging will redirect all services, including web management and DHCP, to a specific VLAN, specified in VLAN ID field. (1 ~ 4094). SSID: Showing the human readable SSID. Wifi Security: Wireless security set to the SSID. 4 Click Apply to save the management VLAN settings or Cancel to discard the changes. Configure Traffic Shaping Settings Management > Wireless Traffic Shaping Traffic shaping regulates the flow of packets leaving an interface to deliver improved Quality of Service. To configure the traffic shaping settings, do the following:
1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 Click Management > Wireless Traffic Shaping. Copyright 2015 TRENDnet. All Rights Reserved. 40 TRENDnet Users Guide TEW-821DAP Configure SNMP Settings Management > SNMP Settings SNMP Settings allows you to assign the contact details, location, community name and trap settings for SNMP. This is a networking management protocol used to monitor network-attached devices. SNMP allows messages (called protocol data units) to be sent to various parts of a network. Upon receiving these messages, SNMP-compatible devices
(called agents) return data stored in their Management Information Bases. 1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 Click Management > SNMP Settings. 3 Configure any of the following parameters for 2.4G or 5G profile:
Outgoing Traffic Limit: Set the traffic limitation going through the wireless interface. The default value is 180Mbps (180,000). The number can be set from 512 to 99,999,999. The traffic will be limited by this value and physical speed whichever is lower. (The TEW-821DAP wireless interfaces are capable of 300 Mbps, 300,000 kbps for 2.4GHz and 5GHz respectively.) Incoming Traffic Limit: Set the traffic limitation going through Ethernet port. The default value is 10Mbps (10,000). The number can be set from 512 to 99,999,999. The traffic will be limited by this value and physical speed whichever is lower. (The TEW-821DAP Ethernet port is capable of 1Gbps, 1,000,000 kbps.) Total Percentage: This value adds up all numbers in following 8 SSID percentage settings. This value may exceed 100, up to 800. The traffic limit of this wireless interface is calculated as: Outgoing Traffic Limit * Total Percentage. SSID (1 - 8): Set the number you want to shape your traffic for clients connects to specific SSIDs by increasing or decreasing the value. The default value is 10 (%). The number can be set from 0 to 100. The traffic limit of this SSID is calculated as:
Outgoing Traffic Limit * Total Percentage. 4 Click Apply to save the changes or Cancel to discard the changes. Copyright 2015 TRENDnet. All Rights Reserved. 41 TRENDnet Users Guide TEW-821DAP 3 Configure or view any of the following parameters:
SNMP: Choose to enable or disable the SNMP feature. Contact: Specify the contact details of the TEW-821DAP. Location: Specify the location of the TEW-821DAP. Community Name (Read Only): Specify the password for access the SNMP community for read only access. Community Name (Read/Write): Specify the password for access to the SNMP community with read/write access. Trap Destination Address: Specify the IP address for the SNMP trap community. Trap Destination Community Name: Specify the name of SNMP trap community. SNMP v3: Select enable or disable SNMP v3 protocol. User Name: SNMP v3 manager user name. Auth Protocol: Choose the authentication method to verify the source of information: MD5, SHA, or None. Auth Key (8-32 Characters): Specify the authentication key between 8 to 32 letters. Priv Protocol: Choose the privacy key to encrypt SNMP messages: DES or None. Priv Key (8-32 Characters): Specify the privacy key between 8 to 32 letters. Engine ID: SNMPv3 engine ID. 4 Click Apply to save the changes or Cancel to discard the changes. Configure Schedule Settings Management > Schedule For additional security control, your access point allows you to create schedules to specify a time period when a feature on your access point should be activated and deactivated. Before you use the scheduling feature on your access point, ensure that your system time is configured correctly. Note: You can apply a predefined schedule to the following features:
9 Wireless (2.4GHz and 5GHz) 9 Wireless Multiple SSID (2.4GHz and 5GHz) 9 MAC Filters Create a Schedule To create a schedule, do the following:
1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 Click Management > Schedule. 3 Configure the following settings:
Rule Name: Enter a name for the schedule you would like to apply. Day(s): Check Select Day(s) to select the days in the Select Day(s) section or select All Week to set the schedule for all days. All Day 24 hrs: Check this box to have the schedule active the entire 24 hours on the days specified. Start Time: Select the activation time of the schedule. Copyright 2015 TRENDnet. All Rights Reserved. 42 TRENDnet Users Guide TEW-821DAP End Time: Select the deactivation time of the schedule. 4 Click Add to create a schedule or Clear to discard the changes. Edit a Schedule 1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 Click Management > Schedule. 3 On the Schedule Rules List section, click the to edit. icon next to the schedule that you want 4 Adjust the necessary settings. 5 Click Save to save the settings. Note: To delete a schedule, click the icon next to the schedule that you want to delete. A confirmation message appears on the screen. Click Yes to confirm. Enable CLI Management > CLI Settings To enable the Command Line Interface for batch management or advanced configuration, select CLI ON and then click Apply. Access the CLI interface using SSH with the administrator user name and password. For example (in Linux):
$ ssh admin@192.168.10.100 The authenticity of host 192.168.10.100
(192.168.10.100) cant be established. RSA key fingerprint is b2:41:6e:0f:4b:2a:f3:03:18:60:
0b:c4:eb:74:9d:9c. Are you sure you want to continue connecting (yes/
no)? yes admin@192.168.10.100s password:
*** Hi admin, welcome to use cli(V-1.7.6) ***
---========= Commands Help =========---
stat -- Status sys -- System wless2 -- 2.4G-Wireless wless5 -- 5G-Wireless mgmt -- Management tree -- Tree help -- Help reboot -- Reboot tew-753dap>
Copyright 2015 TRENDnet. All Rights Reserved. 43 TRENDnet Users Guide Management This section will guide you how to change login password, update the firmware, export/import the system settings, restore the default settings, and other maintenance operations. Change Login Password Management > Administration For security purposes, it is recommended to change the login password periodically. Passwords can contain 0 to 12 alphanumeric characters, and are case sensitive. You can change the password in Management > Administration section or through the System > Wizard. The following instructions includes both options. 1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 Click one of the following:
Management > Administration TEW-821DAP Modify Menu Timeout Management > Administration The menu idle timeout setting controls how long the connection can remain idle before the system forces the remote user to log in again. 1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 Click Management > Administration. 3 In Administrator Setting section modify the idle timeout in seconds. 4 Click Apply to save the idle timeout settings or Cancel to discard the modifications. System > Wizard. 3 Do one of the following:
Management > Administration a) Enter the new password in Password field. b) Click Apply to save the modification.
System > Wizard a) Enter the new password in New Password field. b) To verify, enter the new password in Verify Password field. c) Click Next to save the changes. Copyright 2015 TRENDnet. All Rights Reserved. 44 TRENDnet Users Guide TEW-821DAP Change Device Name Management > Administration For easy access, you can also enter the Management page using the domain name
(http://device name) based on the device name that you have configured in this section. Note: By default, the domain name is the same as your access point model name
(http://tew-821dap). 1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 Click Management > Administration. 3 On the Device Name Settings section, enter the new device name to display on your network to identify the access point in the Device Name field. Set Date and Time Management > Time and Date Settings The accuracy of the system clock is important for scheduling and accurate logging. You can synchronize the system time with your computer, or automatically check the time accuracy with a network time server (NTP server). 1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 Click Management > Time and Date Settings. 3 View or modify the following settings in Time Configuration section:
4 Click Apply to save the changes or Cancel to discard the changes. System Time: Current date and time. Note: If you do not want to use the automatic time configuration (enable NTP server) then modify time manually in Date and Time Settings section. Time Zone: Select the time zone of the country or region you are currently in. The TEW-821DAP will set its time based on your selection. 4 Check Enable Daylight Saving if your time zone has daylight savings. Enter the start time and end time of daylight savings. Copyright 2015 TRENDnet. All Rights Reserved. 45 TRENDnet Users Guide TEW-821DAP 5 If you have a preferred NTP server, check the Enable NTP Server and enter the NTP server IP address. Otherwise, leave it unchecked to use the TEW-821DAPs default NTP server. Wireless LED (Orange: 2.4GHz; Green: 5GHz):
OFF: No link. Blinking green: Data transmission. Backup / Restore System Settings Management > Backup/Restore Settings This page allows you to save the current configurations, load previously saved configurations, and reset TEW-821DAPs configurations back to factory defaults. 6 Click Apply to save the changes or Cancel to discard the changes. Configure LED Indicators Management > LED Control All LED indicators are turned on by default. You can turn any one of them or all of them on or off. 1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 Click Management > LED Control. 3 Click the following LED to turn it on or off:
Power LED:
OFF: Powered off. Solid Orange: System is under Power-ON booting process. Solid Green: System is ON. (Booting process is done.) Network LED (Orange: 10/100; Green: Giga bit):
OFF: No link. Solid green: The devices Ethernet port is connected to an active router or switch. Blinking green: Data transmission. 1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 Click Management > Backup/Restore Settings. 3 Do any of the following:
Click Export to save the current configuration of the AP. To load a configuration file, do the following:
a) Click Browse to load the configuration file. b) Enter the encryption key. c) Click Import. The new configuration file will be saved and encrypted with this new key. Click Load Default if you want to reset TEW-821DAPs configurations back to factory defaults. Copyright 2015 TRENDnet. All Rights Reserved. 46 TRENDnet Users Guide TEW-821DAP Update System Firmware Management > Upload Firmware TRENDnet may periodically release firmware upgrades that might add features or fix problems associated with your TRENDnet model and version. To find out if there is a firmware upgrade available for your device, please check your TRENDnet model and version using the link. http://www.trendnet.com/downloads/
To update system firmware, do the following:
1 If a firmware upgrade is available, download the firmware to your computer. 2 Unzip the file to a folder on your computer. 3 Save the upgrade file on a flash disk. 4 Insert the flash disk into the AP. 5 Log into your access point management page (refer to Log in to Management Page on page 10). 6 Click Management > Upload Firmware. 7 Click Browse to load the upgrade file from your computer. 8 Click Apply. Configure System Log Server Management > Log To keep your system operating history, you can setup local and remote loggings. To set up the remote loggings, do the following:
1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 Click Management > Log. 3 Check the Enable System Log checkbox. 4 Enter the log server IP address or URL. 5 Click Apply to save the settings. To set up the local loggins, do the following:
1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 Click Management > Log. 3 Select Enable to allow local logging. You can view the log in Status > System Log. 4 Click Apply to save the settings. Copyright 2015 TRENDnet. All Rights Reserved. 47 TRENDnet Users Guide TEW-821DAP Execute Diagnostics Test Management > Diagnostics There are 2 network tools you can use on the TEW-821DAP: ping and traceroute. To use ping test, do the following:
1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 Click Management > Diagnostics. 3 Enter the following information:
To use the traceroute test, do the following:
1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 Click Management > Diagnostics. 3 Enter the target machine IP address or domain name to the Target field. 4 Click Traceroute to start the test. The result is displayed as shown on the following image:
Target IP address to the IP field. Ping packet size to the Packet Length field. Number of pings to the Number of Pings field. 4 Click Ping to start the test. The result is displayed as shown on the following image:
Copyright 2015 TRENDnet. All Rights Reserved. 48 TRENDnet Users Guide TEW-821DAP System Reboot Management > Backup/Restore Settings To reboot the AP, do the following:
1 Log into your access point management page (refer to Log in to Management Page on page 10). 2 Click Management > Backup/Restore Settings. 3 Click Reboot. SmartConsole Use SmartConsole to view and edit the main parameters of the devices, such as product name, IP address, MAC address, firmware version, etc. Install the SmartConsole To install the SmartConsole in your computer, do the following:
1 Download and install Adobe AIR software to your computer. 2 From the supplied CD, copy the SmartConsole program to the local disk of your computer. 3 Run AP Utility.exe in SmartConsole folder. The program main screen opens. Please refer to the next section. Copyright 2015 TRENDnet. All Rights Reserved. 49 TRENDnet Users Guide SmartConsole Overview The following image displays the main page of the SmartConsole:
TEW-821DAP Opens device settings page Discovered devices and their parameters Delete device Add device manually Find devices Copyright 2015 TRENDnet. All Rights Reserved. 50 TRENDnet Users Guide TEW-821DAP Using the SmartConsole To start using the SmartConsole, do the following:
1 Click Discover (
devices in the network. 2 Click on the Select checkbox next to the device you wish to configure.
) to let the system automatically discover all available Click to insert the device connection parameters manually. Then click OK and repeat steps 2 to 4. 3 Click Device Settings (
The Device Settings page opens:
) to open the selected devices settings page. Repeat step 2 and click confirmation message. to delete the device from the list. Click OK to the Use to minimize, restore, or close the main page respectively. 4 Modify the basic / wi-fi settings and after finished, click OK to save the changes or Cancel to discard the changes. 5 Do any of the following:
Repeat steps 1 to 4 to modify the settings of another device. Copyright 2015 TRENDnet. All Rights Reserved. 51 TRENDnet Users Guide TEW-821DAP Appendix Specifications Item Chipset Standards Radio Technology Transmission Rate Receiver Sensitivity Frequency Wireless Channel Specifications Qualcomm QCA9563+QCA9882 EEE 802.11b/g/n Wireless LAN 2.4GHz IEEE 802.11a/n/ac Wireless LAN 5GHz IEEE 802.3/IEEE 802.3z Gigabit Ethernet IEEE 802.3at PoE ANSI/IEEE 802.3 Auto negotiation IEEE 802.11g / IEEE 802.11n / IEEE 802.11a/n/ac Orthogonal Frequency Division Multiplexing (OFDM) IEEE 802.11b: Direct Sequence Spread Spectrum (DSSS) 802.11ac: up to 867Mbps 802.11an: up to 300Mbps 802.11a: up to 54Mbps 802.11n: up to 300Mbps 802.11g: up to 54Mbps 802.11b: up to 11Mbps 11ac VHT80 MCS9: Typical - 51dBm @ 10% PER 11ac VHT40 MCS9: Typical - 54dBm @ 10% PER 11ac VHT20 MCS9: Typical - 57dBm @ 10% PER 11a/n HT40 MCS7/15/23: Typical - 61dBm @ 10% PER 11a/n HT20 MCS7/15/23: Typical - 64dBm @ 10% PER 11a/g 54Mbps: Typical - 65dBm @ 10% PER 11b 11Mbps: Typical - 83dBm @ 8% PER 2.4GHz: 2412 ~ 2472 MHz ISM band (channels 1 ~ 13) 5GHz: 5180 ~ 5825 MHz ISM band (channels 36 ~ 165) 2.4GHz: Channel 1 ~ 11(FCC), Channel 1 ~ 13(ETSI) 5 GHz: 36, 40, 44, 48, 149, 153, 157, 161 and 165 (FCC), 36, 40, 44, 48(ETSI) Modulation DBPSK/DQPSK/CCK for DSSS technique BPSK/QPSK/16-QAM/64-QAM/256-QAM for OFDM technique Item Media Access Protocol Wireless Output Power/
Receiving Sensitivity (per chain) Antenna Type Antenna Gain Protocol Hardware Interface Operation Modes SSID Supported Network Protocols DHCP Server/Client Network Management Channel Security Specifications CSMA/CA with ACK 2.4G Mode FCC:23dBm, ETSI:10dBm (max) @ 802.11b FCC:19dBm, ETSI:12Bm (max) @ 802.11g FCC:19dBm, ETSI:12dBm (max) @ 802.11n HT20 FCC:19dBm, ETSI:12dBm (max) @ 802.11n HT40 5G Mode FCC:24dBm, ETSI:22dBm (max) @ 802.11a FCC:24dBm, ETSI:22dBm (max) @ 802.11n HT20 /
802.11ac VHT20 FCC:15dBm, ETSI:22dBm (max) @ 802.11ac VHT80 2.4 GHz: 2 x 4dBi (Peak) PIFA Antennas internal 5 GHz: 2 x 4dBi (Peak) PIFA Antennas internal 2.4 GHz: 2 dBi (max.) / 0 dBi (Avg.) internal 5 GHz: 2 dBi (max.) / 0 dBi (Avg.) internal TCP/IP LAN: 1 x 10/100/1000Mbps Auto-MDIX Gigabit Ethernet port Reset button Power Jack Access Point (AP), AP+WDS Up to 4 SSIDs per band (AP mode) TCP/IP HTTP Web base configuration utility via Ethernet 2.4GHz: Channel 1 ~ 11(FCC), Channel 1 ~ 13(ETSI) 5 GHz: 36, 40, 44, 48, 149, 153, 157, 161 and 165 (FCC), 36, 40, 44, 48(ETSI) 64/128-bits WEP Encryption WPA, WPA2 WPA-PSK, WPA2-PSK MAC address filtering Copyright 2015 TRENDnet. All Rights Reserved. 52 TRENDnet Users Guide TEW-821DAP Item Range Coverage Diagnostic LEDs Power Adapter Power Consumption Operation Temperature Storage Temperature Operating Humidity Certifications Dimensions (D x W x H) Weight Warranty Indoor: Up to 100 meters (depends on environment) Specifications Outdoor: Up to 300 meters (depends on environment) Power 2.4G Wireless 5G Wireless LAN 12VDC / 1A external power adapter 9.6 Watt 0 - 40C (32 - 104F)
-10 ~ 70C Maximum 10% ~ 95% 95%, no condensation FCC certificate for USA CE certificate for Europe 187 x 187 x 46 mm (7.4 x 7.4 x 1.8 in.) 406g (12 oz.) 3 years limited warranty Copyright 2015 TRENDnet. All Rights Reserved. 53 TRENDnet Users Guide TEW-821DAP Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the Increase the separation between the equipment and receiver. receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Operation of this device is restricted to indoor use only. IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Country Code selection feature to be disabled for products marketed to the US/CANADA Europe EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC, 2006/95/EC and 2009/125/EC. Regulation (EC) No. 1275/2008 Regulation (EC No. 278/2009 EN60950-1 : 2006 + A11 : 2009 + A1: 2010 + A12: 2011 Safety of Information Technology Equipment EN 62311: 2008 :
Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz-300 GHz) EN 300 328 V1.8.1 : (2012-06) Class B Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using spread spectrum modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive EN 301 489-1 V1.9.2 : (2011-09) Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements EN 301 489-17 V2.2.1 : (2012-09) Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment; Part 17: Specific conditions for 2,4 GHz wideband transmission systems, 5 GHz high performance RLAN equipment and 5,8 GHz Broadband Data Transmitting Systems EN 301 893 V1.7.1 : (2012-06) Broadband Radio Access Networks (BRAN);5 GHz high performance RLAN;Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive This device is a 2.4/5G GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies. In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services. This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10 mW EIRP in the frequency range of 2454 2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France. Copyright 2015 TRENDnet. All Rights Reserved. 54 TRENDnet Users Guide TEW-821DAP Industry Canada Statement:
This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux CNR exemptes de licence dIndustrie Canada. Son fonctionnement est soumis aux deux conditions suivantes:
(1) Ce dispositif ne peut causer dinterfrences; et(2) Ce dispositif doit accepter toute interfrence, y compris les interfrences qui peuvent causer un mauvais fonctionnement de lappareil. Caution:
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
Avertissement:
(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration dexposition aux radiations:
Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. esky [Czech]
Dansk
[Danish]
Deutsch
[German]
Eesti
[Estonian]
English Espaol
[Spanish]
[Greek]
Franais
[French]
Italiano
[Italian]
Latviski
[Latvian]
TRENDnet tmto prohlauje, e tento TEW-814DAP je ve shod se zkladnmi poadavky a dalmi pslunmi ustanovenmi smrnice 1999/5/ES, 2006/95/ES, a 2009/125/ES. Undertegnede TRENDnet erklrer herved, at flgende udstyr TEW-814DAP overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF, 2006/95/EF, og 2009/125/EF. Hiermit erklrt TRENDnet, dass sich das Gert TEW-814DAP in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie 1999/5/
EG, 2006/95/EG und 2009/125/EG befindet. Kesolevaga kinnitab TRENDnet seadme TEW814DAP vastavust direktiivi 1999/5/E, 2006/95/E ja 2009/125/E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. Hereby, TRENDnet, declares that this TEW-814DAP is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC, 2006/95/EC, and 2009/125/EC. Por medio de la presente TRENDnet declara que el TEW-814DAP cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE, 2006/95/CE, 2009/125/CE y. TRENDnet TEW-814DAP 1999/5/, 2006/95/, 2009/125/ . Par la prsente TRENDnet dclare que lappareil TEW-814DAP est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE, 2006/95/CE, 2009/125/CE et. Con la presente TRENDnet dichiara che questo TEW-814DAP conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE, 2006/95/CE e 2009/125/CE. AroTRENDnetdeklar, ka TEW-814DAP atbilstDirektvas 1999/5/
EK, 2006/95/EK, un 2009/125/EK btiskajmprasbm un citiemar to saisttajiemnoteikumiem. Copyright 2015 TRENDnet. All Rights Reserved. 55 TRENDnet Users Guide TEW-821DAP Lietuvi
[Lithuanian]
Nederlands
[Dutch]
Malti
[Maltese]
Magyar
[Hungarian]
iuo TRENDnet deklaruoja, kad is TEW-814DAP atitinka esminius reikalavimus ir kitas 1999/5/EB, 2006/95/EB ir 2009/125/EB Direktyvos nuostatas. Hierbij verklaart TRENDnet dat het toestel TEW-814DAP in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG, 2006/95/EG, en 2009/125/EG. Hawnhekk, TRENDnet, jiddikjara li dan TEW-814DAP jikkonforma mal-tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm fid-Dirrettiva 1999/5/KE, 2006/95/KE, u 2009/125/KE. Alulrott, TRENDnet nyilatkozom, hogy a TEW-814DAP megfelel a vonatkoz alapvet kvetelmnyeknek s az 1999/5/EK irnyelv, a 2006/95/EK s a 2009/125/EK irnyelv egyb elrsainak. Polski [Polish] Niniejszym TRENDnet owiadcza, e TEW-814DAP jest zgodny Portugus
[Portuguese]
Slovensko
[Slovenian]
Slovensky
[Slovak]
Suomi
[Finnish]
Svenska
[Swedish]
z zasadniczymi wymogami oraz pozostaymi stosownymi postanowieniami Dyrektywy 1999/5/WE, 2006/95/WE i 2009/125/WE. TRENDnet declara que este TEW-814DAP est conforme com os requisitos essenciais e outras disposies da Directiva 1999/5/CE, 2006/95/CE e 2009/125/CE. TRENDnet izjavlja, da je ta TEW-814DAP v skladu z bistvenimi zahtevami in ostalimi relevantnimi doloili direktive 1999/5/ES, 2006/95/ES in 2009/125/ES. TRENDnettmtovyhlasuje, e TEW-814DAP spazkladnpoiadavky a vetkyprslunustanoveniaSmernice 1999/5/ES, 2006/95/ES, a 2009/125/ES. TRENDnet vakuuttaa tten ett TEW-814DAP tyyppinen laite on direktiivin 1999/5/EY, 2006/95/EY ja 2009/125/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. Hrmed intygar TRENDnet att denna TEW-814DAP str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG, 2006/95/EG och 2009/125/EG. Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase. TEW-821DAP 3 Years Warranty AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty. If a product does not operate as warranted during the applicable warranty period, TRENDnet shall reserve the right, at its expense, to repair or replace the defective product or part and deliver an equivalent product or part to the customer. The repair/replacement units warranty continues from the original date of purchase. All products that are replaced become the property of TRENDnet. Replacement products may be new or reconditioned. TRENDnet does not issue refunds or credit. Please contact the point-of-purchase for their return policies. TRENDnet shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to TRENDnet pursuant to any warranty. There are no user serviceable parts inside the product. Do not remove or attempt to service the product by any unauthorized service center. This warranty is voided if (i) the product has been modified or repaired by any unauthorized service center, (ii) the product was subject to accident, abuse, or improper use (iii) the product was subject to conditions more severe than those specified in the manual. Warranty service may be obtained by contacting TRENDnet within the applicable warranty period and providing a copy of the dated proof of the purchase. Upon proper submission of required documentation a Return Material Authorization (RMA) number will be issued. An RMA number is required in order to initiate warranty service support for all TRENDnet products. Products that are sent to TRENDnet for RMA service must have the RMA number marked on the outside of return packages and sent to TRENDnet prepaid, insured and packaged appropriately for safe shipment. Customers shipping from outside of the USA and Canada are responsible for return shipping fees. Customers shipping from outside of the USA are responsible for custom charges, including but not limited to, duty, tax, and other fees. Copyright 2015 TRENDnet. All Rights Reserved. 56 TRENDnet Users Guide TEW-821DAP Governing Law: This Limited Warranty shall be governed by the laws of the state of California. Some TRENDnet products include software code written by third party developers. These codes are subject to the GNU General Public License (GPL) or GNU Lesser General Public License (LGPL). Go to http://www.trendnet.com/gpl or http://www.trendnet.com Download section and look for the desired TRENDnet product to access to the GPL Code or LGPL Code. These codes are distributed WITHOUT WARRANTY and are subject to the copyrights of the developers. TRENDnet does not provide technical support for these codes. Please go to http://www.gnu.org/licenses/gpl.txt or http://www.gnu.org/licenses/lgpl.txt for specific terms of each license. WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, THE CUSTOMERS SOLE REMEDY SHALL BE, AT TRENDNETS OPTION, REPAIR OR REPLACE. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. TRENDNET NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION MAINTENANCE OR USE OF TRENDNETS PRODUCTS. TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMERS OR ANY THIRD PERSONS MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD. LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDNET ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT TRENDNETS OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE. Copyright 2015 TRENDnet. All Rights Reserved. 57 Product Warranty Registration Please take a moment to register your product online. Go to TRENDnets website at http://www.trendent.com/register TRENDnet 20675 Manhattan Place Torrance, CA 90501. USA Copyright 2015. All Rights Reserved.TRENDnet.
This product uses the FCC Data API but is not endorsed or certified by the FCC