INETX Digital Control Panel for caravanning industry User manual

 

Truma iNet X EN Operating instructions To be kept in the vehicle Seite 02 BG, CS, EL, ES, ET, FI, HR, HU, IS, LT, LV, NO, PL, PT, RO, RU, SK, SL, TR Truma iNet X Table of contents Symbols used Symbols used ........................................................................ 2 Intended use ....................................................................... 2 The device must only be installed and repaired by an expert. Operating instructions Symbol indicates possible hazards. Note containing information and tips. Intended use The electronic control unit Truma iNet X is used to control and monitor Truma appliances and accessories from selected third-party manufacturers. The Truma iNet X is intended for installation in caravans and motor homes. Installation in boats is not permitted. Safety instructions ............................................................ 3 Important notes ................................................................. 3 Display and control elements .......................................... 4 Display ................................................................................... 4 Home button ......................................................................... 4 Back button ........................................................................... 4 Initial start-up ..................................................................... 4 Start-up ................................................................................ 4 Switching off ...................................................................... 5 Standby mode .................................................................... 5 Restarting the control panel ............................................ 5 Operation ............................................................................. 5 Touchscreen .......................................................................... 5 App control (Bluetooth) ......................................................... 5 Connection with mobile devices ........................................... 5 Resetting faults .................................................................. 6 Maintenance ....................................................................... 6 Disposal ............................................................................... 6 Technical specifications ................................................... 6 Dimensions ........................................................................... 7 Manufacturer's Warranty

(European Union) ................................................................ 7 2 EN Operating instructions Safety instructions The Truma iNet X must not be operated unless it is in tech-

nically perfect condition. Repairs must be carried out immediately. Only carry out repairs yourself if the solution is described in the trouble-

shooting guide of the control panel or the App. Do not repair or modify the Truma iNet X. A defective Truma iNet X may only be repaired by the man-

ufacturer or the manufacturers service department. Never use LP gas appliances when refuelling, in multi-storey car parks, in garages or on ferries. Switch off the Truma iNet X to prevent the heater being switched back on by the TrumaApp or the time switch (see Switching on/off). Do not switch on the appliance if the housing is damaged or if liquid has entered it. Important notes If a new or replacement appliance (heater, air conditioning system) is connected to the bus system, the procedure de-

scribed in Initial start-up must be repeated. In case of problems, the appliance is reset to the last func-

tioning version. Air conditioning systems joint use of IR remote con-

trol and Truma iNet X Even when the Truma iNet X has been connected, the IR remote control is still available to control the air condi-

tioning system. The Truma iNet X recognises all settings that are made on the air conditioning system using the IR remote control. The IR remote control only transmits the settings that are shown in its display (no bidirectional communication). Only the time switch of the Truma iNet X may be used to define the start and end time of a required period. This device corresponds to Section 15 of the FCC reg-

ulations and the RSS standards of Industry Canada for licence-exempt radio devices. For operation, the following conditions must be fulfilled:

(1) The device must not cause any damaging interference.

(2) The device must be immune to interference, also inter-

ference that could cause unwanted operating states. This device complies with Part 15 of the FCC Rules and contains licence-exempt transmitter(s)/receiver(s) that com-

ply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including inter-

ference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le pr-sent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applica-

bles aux appa-reils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) lappareil ne doit pas produire de brouillage, et

(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est sus-ceptible den compromettre le fonctionnement. 3 EN Display and control elements Home button Briefly press the Home button to go back to the dashboard . Press the Home button longer to put the control panel in standby mode. Back button Briefly press the Back button to go back to the previous menu level. The last set value remains unchanged. Press the Back button longer to open the device manager. 3 Initial start-up Ensure that all connected appliances have power. The control panel recognises the connected appliances and guides the user through the start-up procedure. Start-up When the Truma iNet X is connected to the power supply, the dashboard is displayed after a few seconds. 1 2 Figure 1 1 = Display 2 = Home button 3 = Back button Display The Truma iNet X has a touchscreen display with which the connected appliances can be monitored and controlled. 4 EN Switching off Operation The Truma iNet X can be put into stand-by mode or switched off using the menu on the dashboard . Touchscreen If the Truma iNet X is switched off, all connected heating and air conditioning systems are also switched off. The control panel is operated with your fingers via the touchscreen. Standby mode App control (Bluetooth) If there is no input for a certain time, the display switches off automatically to save power. If the Truma iNet X is in standby mode, the connected appliances can still be controlled via the App. You can also press the Home button longer to put the control panel in standby mode. If the Truma iNet X is in standby mode, briefly press the Home button or the Back button to activate the Truma iNet X. After a few seconds the lock screen is displayed. Press again to unlock the display and show the dashboard. Restarting the control panel Press and hold the Home button and the Back button togeth-

er to restart the control panel. The Truma iNet X can also be connected to a mobile device

(smartphone/tablet) with Bluetooth so that connected appli-

ances can be controlled with the App . Depending on the operating system, the App must be in-

stalled on the mobile device from the Google Playstore

( Android) or App Store (iOS) in order to use this function. Only a limited number of mobile devices can be stored in the Truma iNet X. The stored mobile devices can be managed via the Truma iNet X. Only one mobile device at a time can be connected with the Truma iNet X and be used to control appliances. If you encounter problems with the App, check that you have the latest version and, if not, update it. Connection with mobile devices Enable Bluetooth on the mobile device. If you have any questions with regard to the settings of your mobile device, contact the manufacturer. 5 EN Technical specifications Display (touch) Operating temperature range Storage temperature range Interfaces Power supply Power consumption Weight Protection class Protection type TFT-LCD 4.3" (resistive)

-30C to +70C

-30C to +70C TIN bus, CI bus, CAN bus Bluetooth Low Energy (BLE) 8V 16V typ. 1.5 W approx. 150g Class III IP 10 Subject to technical changes. The connection can be made via the Truma iNet X or via the mobile device with the help of the App. Follow the instructions of the set-up wizard on the screen. Resetting faults If a fault occurs in a connected appliance, this is shown on the Truma iNet X.. Solutions to rectify the fault are suggested in the display. The fault can then be reset with the Truma iNet X. Maintenance The Truma iNet X requires no maintenance. Use a damp, non-scouring cloth to clean the front panel. If this is not suffi-

cient, use a neutral soap solution. Disposal Neither the appliance nor the batteries may be disposed of with domestic refuse, instead they must be sent for recycling separately via a collection point. By doing this you are contributing towards reuse and recycling. National regulations and laws must be observed. 6 EN Dimensions 120,1 31 Manufacturer's Warranty

(European Union) 1. Scope of Manufacturers Warranty 9 6

, 7 8 1 9 Figure 2 Dimensions in mm. Illustration not to scale As the Manufacturer of the appliance, Truma undertakes a warranty towards the Consumer that covers any material and/

or manufacturing defects of the appliance. This Warranty is applicable in EU member states as well as in Iceland, Norway, Switzerland and Turkey. A Consumer is the natural person who was the first one to purchase the appliance from the Manufacturer, OEM or dealer and who neither resold the appliance in a commercial or self-employed professional capacity nor installed it for a third party in such a capacity. The Manufacturers Warranty covers any of the aforemen-

tioned defects that occur within 24 months upon concluding the purchase agreement between the seller and the Con-

sumer. The Manufacturer or an authorised service partner undertakes to remedy such defects through subsequent fulfilment, i.e. at its discretion either by repairing or replacing the defective item. Defective parts shall become the property of the Manufacturer or the authorised service partner. If the appliance is no longer manufactured at the time of defect no-

tification and if replacement delivery has been opted for, then the Manufacturer may deliver a similar product. If the Manufacturer remedies a defect under its Warranty commitment, the term of the Warranty shall not start again with regard to the repaired or replaced parts; rather, the orig-

inal warranty period shall continue to be applicable to the appliance. Only the Manufacturer itself or an authorised ser-

vice partner shall be entitled to conduct a warranty job. Any costs that occur in the event of a warranty claim shall be set-

tled directly between the authorised service partner and the 7 EN Manufacturer. The Warranty does not cover additional costs arising from complicated removal or installation jobs on the appliance (e.g. dismantling of furnishings or parts of the vehi-

cle body), and neither does it cover travel expenses incurred by the authorised service partner or the Manufacturer. No further-reaching claims shall be permitted, especially dam-

age claims presented by the Consumer or third parties. This shall not affect the provisions of the German Product Liability Act (Produkthaftungsgesetz). The voluntary manufacturers warranty does not affect the Consumers legally valid claims for defects against the seller in the relevant country of purchase. In individual countries there may be warranties that can be issued by the relevant dealer (official distributor, Truma Partner). In such cases the warranty can be implemented directly through the dealer from whom the Consumer bought the appliance. The warranty reg-

ulations of the country in which the appliance was purchased by the Consumer for the first time shall also be applicable. 2. Warranty exclusions No warranty claim shall be applicable under the following circumstances:

Improper, unsuitable, faulty or negligent use and any use that is not compliant with the intended purpose Improper installation, assembly or commissioning, contrary to operating or installation instructions Improper operation or operation contrary to operating or installation instructions, particularly any disregard for main-

tenance, care or warning notes, Instances where installations, repairs or any other proce-

dures have been conducted by non-authorised parties Consumable materials and parts which are subject to natu-

ral wear and tear 8 Installation of replacement, supplementary or accessory parts that are not original manufacturers parts or which have not been approved by the manufacturer. This applies in particular if the appliance is subject to networked control, if the control units or the software have not been approved by Truma or if the Truma control unit (e.g. Truma CP plus or Truma iNet Box) has not been exclusively used for con-

trolling Truma appliances or appliances approved by Truma. As a consequence of damage arising from foreign sub-

stances (e.g. oil, or plasticisers in the gas), chemical or electrochemical influences in the water, or cases when the appliance has come into contact with unsuitable substanc-

es (e.g. chemical products, flammable substances or un-

suitable cleaning agents) Damage caused by abnormal environmental or unsuitable operating conditions Damage caused by force majeure or natural disasters or any other influences not within Trumas responsibility Damage resulting from improper transport End customers or third-party modifications of the appli-

ance, including any replacement, supplementary or acces-

sory parts, or installation of the same, especially concerning the exhaust gas system or the cowl. 3. Making a warranty claim The warranty must be claimed with an authorised service part-

ner or at the Truma Service Centre. All the relevant addresses and phone numbers can be found at www.truma.com, in the Service section. The Manufacturers address is:

Truma Gertetechnik GmbH & Co. KG Truma Servicezentrum Wernher-von-Braun-Strae 12 85640 Putzbrunn, Germany EN To ensure a smooth procedure, we would be grateful if you could have the following details ready before contacting us:

Detailed description of the defect Serial number of the appliance Date of purchase The authorised service partner or the Truma Service Centre will then specify the further procedure. To avoid transport damage, the affected appliance must only be shipped by prior arrangement with the authorised service partner or the Truma Service Centre. If the warranty claim is recognised by the Manufacturer, then the transport expenses shall be borne by the same. If no warranty claim is applicable, the Consumer will be notified accordingly and any repair and transport expenses shall then be the Consumers liability. We ask you not to send in an ap-

pliance without prior arrangement. 9 EN DE EN FR IT NL Bei Strungen wenden Sie sich bitte an das Truma Servicezentrum oder an einen unserer autorisierten Servicepartner (siehe www.truma.com). Fr eine rasche Bearbeitung halten Sie bitte Gertetyp und Seriennummer

(siehe Typenschild) bereit. Should problems occur, please contact the Truma Service Centre or one of our authorised service partners (see www. truma.com). In order to avoid delays, please have the unit model and serial number ready (see type plate). Veuillez vous adresser au centre de SAV Truma ou un de nos partenaires de SAV agrs en cas de dysfonctionnements

(voir www.truma.com). Pour un traitement rapide de votre demande, veuillez tenir prts le type dappareil et le numro de srie (voir plaque signaltique). In caso di guasti rivolgersi al centro di assistenza Truma o a un nostro partner di assistenza autorizzato

(consultare il sito www.truma.com). Affinch la richiesta possa essere elaborata rapidamente, tenere a portata di mano il modello dellapparecchio e il numero di matricola

(vedere targa dati). Bij storingen kunt u contact opnemen met het Truma Servicecentrum of met een van onze erkende servicepartners (zie www.truma.com). Voor een snelle bediening dient u apparaattype en serienummer (zie typeplaat) gereed te houden. DA SV BG CS EL ES ET Ved fejl kontaktes Trumas serviceafdeling eller en af vores autoriserede servicepartnere (se www.truma.com). Srg for at have oplysninger om apparattype og serienummer (se typeskiltet) klar for hurtig behandling. Vid fel kontakta Truma servicecenter eller ngon av vra auktoriserade servicepartner (se www.truma.com). Fr snabb handlggning br du ha aggregatets typ och serienummer (se typskylten) till hands. Truma Truma . Nvod k pouit a montn nvod si lze v ei Va zem vydat u vrobce Truma nebo servisu Truma ve Va zemi. Truma Truma . Las instrucciones de uso y de montaje en su idioma pueden solicitarse al fabricante Truma o al Servicio postventa Truma en su pas. Kasutus- ja paigaldusjuhendit Teie riigikeeles saab taotleda tootjalt Truma vi Truma Servicelt Teie riigis. FI HR HU IS LT LV NO Saat kytt- ja asennusohjeen pyynnst omalla kielellsi valmistajalta (Truma) tai maasi Truma-huoltoon. Upute za uporabu i montau na jeziku Vae zemlje moete traiti kod proizvoaa Truma ili kod Truma Service u Vaoj zemlji. Az n nyelvn a hasznlati s beszerelsi utasts a Truma gyrtjtl vagy az adott orszg Truma szerviztl szerezhet be. getur nlgast notkunar- og uppsetningarleibeiningar nu tungumli hj framleiandanum Truma ea hj Truma Service nu landi. Naudojimo ir montavimo instrukcij js alies kalba galite gauti i gamintojo Truma ir js alies Truma klient aptarnavimo centruose. Lietoanas un instalcijas instrukciju attiecgs valsts valod Js varat pieprast pie raotja Truma vai Truma Service Jsu valst. Spr om bruks- og monteringsanvisning p norsk hos produsenten Truma eller Trumas serviceavdeling i landet ditt. PL PT RO RU SK SL TR Instrukcj obsugi i instrukcj montau w Pastwa wersji jzykowej mona otrzyma w firmie Truma lub serwisie firmy Truma znajdujcym si w Pastwa kraju. As instrues de utilizao e montagem podem ser solicitadas junto do fabricante Truma ou do servio de assistncia da Truma no seu pas. Putei solicita instruciunile de utilizare i instruciunile de montaj n limba dumneavoastr la productorul Truma sau la service-ul Truma din ara dumneavoastr. Truma Truma

. Nvod na pouitie a mont vo Vaom ttnom jazyku si mete vyiada u vrobcu Truma alebo v servise Truma vo Vaej krajine. Navodila za uporabo in vgradnjo v vaem jeziku lahko naroite pri proizvajalcu Truma oz. v servisni slubi podjetja Truma v vai dravi. Dilinizdeki kullanma ve montaj talimat, retici Truma'dan veya lkenizdeki Truma servisinden talep edilebilir. AU In Australia, always notify the Service Australia if problems are encountered; in other countries the relevant service partners should be contacted

(www.truma.com). Having the equipment model and the serial number ready

(see type plate) will speed up processing. Manufacturing Truma Gertetechnik GmbH & Co. KG Wernher-von-Braun-Strae 12 D - 85640 Putzbrunn Germany www.truma.com Service Europe Telefon +49 (0)89 4617-2020 Telefax +49 (0)89 4617-2159 service@truma.com Service Australia Leisure-Tec Australia Pty. Ltd. 50 Metrolink Circuit, Campbellfield, VIC 3061 Australia Telephone:

+61 1300 07 2018 E-Mail: service@leisure-tec.com.au 9 1 0 2

/

5 0 0 0 3 8 0 0 0

-

0 0 0 7 4