UAPRO 802.11abgn Access Point User manual

Company: Ubiquiti Inc.

FCC ID: SWX-UAPRO

submitted	available	document details (if available)	source link
April 17 2012	April 17 2012	UniFi AP-Pro User Guide J Lee Acrobat Distiller 8.1.0 (Windows)

exhibit
download
text

various

User manual

Users Manual

pdf

4.31 MiB

April 17 2012

:`Z[LT

,U[LYWYPZL>P-P:`Z[LT P :

UniFi AP-Pro User Guide Table of Contents Table of Contents Chapter 1: Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Network Topology Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Hardware Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Chapter 2: Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Hardware Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Powering the UniFi AP-Pro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Software Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Chapter 3: Using the UniFi Controller Software . . . . . . . . . . . . . . . . . . . . . . 8 Interface Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Common Interface Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Recent Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Admin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Chapter 4: Map Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Adding Custom Maps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Adding a Google Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Placing Access Points on the Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Setting the Map Scale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Chapter 5: Statistics Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Clients . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Quick Look . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Current Usage - Top Access Points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Recent Activities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Chapter 6: Access Points Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Chapter 7: Users Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Chapter 8: Guests Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Chapter 9: Offline Clients Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Chapter 10: Access Point Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Guests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 Ubiquiti Networks, Inc. i UniFi AP-Pro User Guide Table of Contents Chapter 11: User/Guest Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40 Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40 History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41 Chapter 12: Hotspot Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Appendix A: Portal Customization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44 Enabling Portal Customization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44 Viewing the Default Portal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44 Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44 Appendix B: UniFi Discovery Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 Appendix C: Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Appendix D: Safety Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Electrical Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 Appendix E: Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 General Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 Appendix F: Compliance Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 FCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51 Industry Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51 RF Exposure Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51 CE Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51 RoHS/WEEE Compliance Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 Appendix G: Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Appendix H: Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Ubiquiti Networks Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54 Ubiquiti Networks, Inc. ii UniFi AP-Pro User Guide Chapter 1: Product Overview Thank you for purchasing the Ubiquiti UniFi AP-Pro. The UniFi AP-Pro works with the UniFi AP, AP-LR, AP-Mini, AP-Outdoor, and AP-Outdoor 5G. It includes the UniFi Controller software, which allows you to manage your wireless network using your Web browser. This User Guide is for use with the UniFi AP-Pro and version 2.0 or above of the UniFi Controller software. Additional information is available on our website at http://wiki.ubnt.com/UniFi_FAQ The UniFi AP-Pro also includes the necessary hardware for mounting the unit on a wall or a ceiling. It supports Passive PoE, which works with the included PoE adapter or a 48V, 802.3af compliant switch. The UniFi AP-Pro also includes the necessary hardware for mounting the unit on a wall or a ceiling. Package Contents Chapter 1: Product Overview Network Topology Requirements A DHCP-enabled network (for the wired Access Point to obtain an IP address as well as for the wireless Access Points after the deployment) A management station computer running the UniFi Controller software, located either onsite and connected to the same Layer-2 network, or off-site in a cloud or NOC UAP/UAP-LR UAP-Pro Router or On-Site Management Station Off-Site Cloud/NOC Sample Network Topology UniFi AP Pro Mounting Bracket Ceiling Backing Plate All UniFi APs support off-site management controllers.

,U[LYWYPZL>P-P:`Z[LT UniFi Controller CD with User Guide Quick Start Guide PoE GigE Adapter (48V, 0.5A Gigabit) Power Cord M3X50 Flat Head M3 Keps Nuts with Screws

(Qty. 3) Tooth Washers

(Qty. 3) M2.9X20 Screws

(Qty. 3) M3X20 Screw Anchors

(Qty. 3) System Requirements Microsoft Windows XP, Windows Vista, Windows 7, or Mac OS X Java Runtime Environment 1.6 (or above) Web Browser: Mozilla Firefox, Google Chrome, or Microsoft Internet Explorer 8 (or above) Ubiquiti Networks, Inc. 1 UniFi AP-Pro User Guide Hardware Overview Front Chapter 1: Product Overview Back Reset Button The reset button serves two functions:

Restart It will restart the device when you press and release it quickly. Restore Factory Defaults When you press and hold it for more then five seconds, it will restore the device to the factory default settings. LED Indicates the status of the device. See the table below for details. LED Color Status Flashing White Initializing. Steady White Factory default, waiting to be integrated. Alternating White/Blue Device is busy; do not touch or unplug it. This usually indicates a process such as a firmware upgrade is taking place. Quickly Flashing Blue This is used to locate an AP. When you click Locate in the UniFi Controller software, the AP will flash. It will also display the location of the AP on the map. Steady Blue Indicates the device has been successfully integrated into a network and is working properly. Steady Blue with occasional flashing Indicates the device is in an isolated state

(all WLANs are brought down until an uplink is found). Main/48V The 10/100/1000 Mbps port connects the power and should be connected to the LAN and DHCP server. Power can be provided by a 48V, 802.3af compliant switch or by the included PoE adapter. Secondary Ethernet Port The 10/100/1000 Mbps port can be used as as an uplink for other devices once they have been adopted. Ubiquiti Networks, Inc. 2 Chapter 2: Installation 6. Align the notch on the UniFi AP-Pro with the notch on the Mounting Bracket. UniFi AP-Pro User Guide Chapter 2: Installation Hardware Installation The UniFi AP-Pro can be mounted to the wall or ceiling. Perform the steps for the appropriate installation:

Wall Mount 1. Position the Mounting Bracket at the desired location on the wall with the cable feed slot pointed towards the floor. 2. Use a pencil to mark the three holes on the wall. Use a

PPGULOOELWWRGULOOWKHKROHVLQWKHZDOO

Top 7. Turn the UniFi AP-Pro clockwise until it locks into place. Security Lock Optional 25 mm Hole for Ethernet Cable Feed through Wall 3. (Optional) If your Ethernet cable feeds through the wall, cut or drill a circle that is approximately 25 mm in size and lines up with the cable feed slot. 4. Insert the M3X20 Screw Anchors into the 6 mm holes. Secure the Mounting Bracket to the wall by inserting the M2.9X20 Screws into the anchors. 5. Connect the Ethernet cable to the Main Ethernet Port on the UniFi AP-Pro. Note: To remove the UniFi AP-Pro, stick a pin in the notch on the side to release the security lock (see the illustration in step 2), and then turn the UniFi AP-Pro counterclockwise. Ceiling Mount 1. Remove the ceiling tile. 2. Place the Mounting Bracket in the center of the ceiling tile. Mark the three mounting screw holes and 25 mm hole for the Ethernet cable. Security Lock Ubiquiti Networks, Inc. 3 25 mm Hole for Ethernet Cable Feed UniFi AP-Pro User Guide Chapter 2: Installation 3. Use a 3 mm drill bit to drill the screw holes, and cut or 7. Align the notch on the UniFi AP-Pro with the notch on drill the 25 mm hole for the Ethernet cable feed. the Mounting Bracket. 4. Secure the Mounting Bracket to the ceiling tile using the Ceiling Backing Plate, M3X50 Flathead Screws, and M3 Keps Nuts. 8. Turn the UniFi AP-Pro clockwise until it locks into place. Note: To remove the UniFi AP-Pro, stick a pin in the notch on the side to release the security lock (see the illustration in step 2), and then turn the UniFi AP-Pro counterclockwise. Powering the UniFi AP-Pro The UniFi AP-Pro can be powered directly by an 802.af compliant switch or with the included PoE GigE Adapter. Connect to an 802.3af Compliant Switch Connect the other end of the Ethernet cable coming from the Main Ethernet Port of the UniFi AP-Pro directly to a PoE port on an 802.3af compliant switch. 5. Feed the Ethernet cable through the 25 mm hole. 6. Connect the Ethernet cable to the Main Ethernet Port. 802.3af Switch Power Connection Diagram Ubiquiti Networks, Inc. 4 UniFi AP-Pro User Guide Chapter 2: Installation Connect to the PoE GigE Adapter 1. Connect the other end of the Ethernet cable coming from the Main Ethernet Port of the UniFi AP-Pro to the Ethernet port labeled POE on the PoE GigE Adapter. Software Installation Insert the UniFi Controller software CD into your CD-ROM drive and follow the instructions for your specific computer type. Mac Users 1. Click the Install icon. 2. Connect an Ethernet cable from your LAN to the Ethernet port labeled LAN on the PoE GigE Adapter. 3. Connect the power cord to the power port on the PoE GigE Adapter. Connect the other end to of the power cord to a power outlet. 2. Click Continue and follow the on-screen instructions to install the software. Below is an overview of the PoE connections using the included PoE GigE Adapter. 3. Go to Go > Applications and double-click the UniFi icon. Proceed to Configuring the UniFi Controller Software on page 6. PoE GigE Adapter Power Connection Diagram Ubiquiti Networks, Inc. 5 UniFi AP-Pro User Guide PC Users 1. Launch UniFi-installer.exe. 2. Click Install. Chapter 2: Installation Configuring the UniFi Controller Software 1. The UniFi Controller software startup will begin. Click Launch a Browser to Manage Wireless Network. 3. If your computer doesnt have Java 1.6 or above installed, you will be prompted to install it. Click Install to continue. 2. Select your language and country. Alternatively, you click restore from a previous backup to use a file that contains your backup settings. Click Next. 4. Click Next. Note: U.S. product versions are locked to the U.S. Country Code to ensure compliance with FCC regulations. 3. Select the devices that you want to configure and click Next. 5. Ensure that the Start UniFi Controller after installation option is checked and click Finish. Note: The UniFi Controller software can also be launched from Start > All Programs. Ubiquiti Networks, Inc. 6 UniFi AP-Pro User Guide Chapter 2: Installation 4. The UniFi Installation Wizard will create a secure primary wireless network for your devices. Perform the following steps:

A login screen will appear for the UniFi Controller management interface. Enter the admin name and password that you created and click Login. a. Enter the wireless network name (SSID) in the Secure SSID field. Proceed to the next chapter for information on using the UniFi Controller software. b. Enter a passphrase to be used for your primary network in the Security Key field. c. To enable guest access, select Enable Guest Access, and enter a guest network name in the Guest SSID field. d. Click Next. 5. Enter an admin name in the Admin Name field and password in the Password field to use when accessing the management interface. Confirm your password in the Confirm field. Click Next. 6. Review your settings. Click Back to make changes or Finish to save your settings. Once finished you will be redirected to the management interface via your Web browser. Congratulations, your wireless network is now configured. Ubiquiti Networks, Inc. 7 UniFi AP-Pro User Guide Chapter 3: Using the UniFi Controller Software The UniFi Controller software that comes with your UniFi AP-Pro has a browser-based interface for easy configuration and management. To access the interface, perform the following steps:

1. Launch the UniFi Controller application if hasnt already been started. Mac users: Go > Applications > UniFi Windows users: Start > All Programs > Ubiquiti UniFi. 2. The UniFi login screen will appear. Enter the admin name and password in the appropriate fields and click Login. Chapter 3: Using the UniFi Controller Software Access Points connected Drop-down clickable list of all of the Access Points that are online. disconnected Displays a list of Access Points that were previously online but are no longer accessible. pending Drop-down clickable list of all of the Access Points that are not yet managed but are available for management. Stations users Displays the total number of users connected to the primary network. guests Displays the total number of users connected to the guest network. Recent Events Displays a list of recent events including the date and time the event occurred and the details of the event. The User and Access Point names are clickable links. Interface Tabs The UniFi software consists of six primary tabs. This User Guide covers each tab with a chapter. For details, on a specific tab, refer to the appropriate chapter. Map Tab on page 15 Statistics Tab on page 22 Access Points Tab on page 24 Users Tab on page 26 Guests Tab on page 28 Offline Clients Tab on page 30 Common Interface Options The common interface options are accessible from all tabs in the UniFi interface. Event Slider Move the slider right and left to navigate between pages of events. Search Allows you to enter text you want to search for. Simply begin typing; there is no need to press Enter. Clicking on an Event Device Link The event messages have clickable links [in brackets underlined in gray text] for AP (see Access Point Details on page 31), User, and Guest (see User/Guest Details on page 40). Details vary based on the selection. Ubiquiti Networks, Inc. 8 UniFi AP-Pro User Guide Chapter 3: Using the UniFi Controller Software Alerts Important events are displayed in the alerts window. The date and time of the event and the message are displayed. Settings > System Search Allows you to enter text you want to search for. Simply begin typing; there is no need to press Enter. Show Archived Show all of the alert messages that have been archived. Archive All Archive all of the alert messages displayed on the screen. Adopt Click to adopt an Access Point that is waiting for adoption. Archive Archive the selected alert message. Settings System System related settings. Guest Control Guest portal and policies. Wireless Networks Wireless networks. Blocked Devices List of blocked wireless devices.

>_>_ Admin Settings Admin username, password, and preferences. User Groups User Group settings. Ubiquiti Networks, Inc. System Configuration System Name Editable field with the system name. Country Select your country from the drop-down list. Services Automatic Upgrade When enabled, this option will automatically upgrade your firmware when an update is available. LED When enabled, the LED on the Access Point will light up. When disabled, the LED will turn off. Background Scanning When this option is enabled, all managed Access Points will scan in the background for Rogue Access Points third-party or UniFi Access Points that are being managed by another instance of the UniFi Controller software. This option is disabled by default. Scan Now When clicked, all managed Access Points will scan across all maps for two to three seconds. New Access Points in their default state will appear under Access Points > Pending. Load Balancing Sets a desired number of clients per AP. While an AP will allow more clients to connect, it will start to look at those with lower signals and disconnect them. Network Discovery When enabled, this option allows UniFi to be discoverable via UPnP. This option is disabled by default. Uplink Connectivity Monitor It monitors the uplinks of the managed Access Points, either wired or wireless, by checking to see if the gateway/custom IP can be reached. The monitor and wireless uplink capability are enabled by default. Use default gateway Use default gateway is selected by default; all managed Access Points will use the gateway of the Access Point that is providing IP information, either by DHCP or Static designation. Use custom IP Select Use custom IP to specify an IP address; all managed Access Points will use the IP address you enter in the Uplink IP address field. 9 UniFi AP-Pro User Guide Chapter 3: Using the UniFi Controller Software Remote Logging Enable to define a remote syslog server. Enter the IP address and port of the syslog server. Click Apply to save any changes that you have made. Mail Server When enabled, UniFi will send email alerts when triggered

(Pending Access Points and Disconnected Access Points) to the administrator email address specified under Settings!Admin Settings > Admin Preferences > Email Alert. No authentication When this option is selected, guests are not required to log in, but must accept the Terms of Use. When you select No authentication, you must select Guest Policy under Settings > Wireless Networks >

SSID > Edit > Wireless Configurations in order to enforce selection of the Terms of Use by the guest. SMTP Server Enable by selecting the checkbox and entering the outgoing (SMTP) mail server name. Optionally, you may enable Secure Sockets Layer (SSL) to provide communication security over the Internet. The port number will automatically change to 465. Enable authentication Enable by selecting the checkbox and entering the username and password required by the mail server. Test SMTP Server Enter an email address and click Send to test the mail server setup. Apply Click Apply to save changes. Settings > Guest Control Guest Policies Guest Portal This option is disabled by default. When disabled, guests can access the Internet without entering a password or accepting Terms of Use. When this option is enabled, you can control the Guest Portal. Authentication When the Guest Portal is enabled, the authentication options will appear. There are four different authentication methods available:

Simple Password When this option is selected, guests are required to enter the simple password and accept the Terms of Use. When you select Simple Password, you must select Guest Policy under Settings > Wireless Networks > SSID > Edit > Wireless Configurations in order to enforce entry of the password and selection of the Terms of Use by the guest. Hotspot When selected, enables Hotspot functionality including the ability to customize portal login pages and bill customers using major credit cards or via PayPal. When you select Hotspot, you must select:

Voucher or Payment in the HotspotVHFWLRQDVD method of Hotspot authorization Guest Policy to enforce entry of voucher, payment, and Terms of Use by the guest (Go to Settings >

Wireless Networks > Name_of_wireless_network > Edit >

Wireless Configurations.) External Portal Server If using an external server to host a custom guest portal, enter the IP address in the Custom Portal > IP Address box using the following format: 192.168.0.0. Guest Password (Option only available when using Simple Password authentication) Enter a password that guests must enter before accepting the Terms of Use and connecting to the Internet. Ubiquiti Networks, Inc. 10 UniFi AP-Pro User Guide Chapter 3: Using the UniFi Controller Software

- Use Paypal Sandbox For PayPal testing purposes, enable this option and click Apply Sandbox Account to set up/access your PayPal Sandbox Test Environment. Hotspot Operator Click Go to Hotspot Manager to manage Wireless Guests, Payments/Transactions, Vouchers, and Operator Accounts. See Hotspot Manager on page 42. Apply Click Apply to save changes. When logging in with No authentication, guests will be required to accept the Terms of Use before gaining access to the Internet. When logging in with Simple Password authentication, guests will be required to enter the Guest Password and accept the Terms of Use before gaining access to the Internet. When logging in with Voucher-based Hotspot authentication, guests will be required to enter the voucher number and accept the Terms of Use before gaining access to the Internet. Expiration (Option only available when using No authentication or Simple Password authentication) Allows the specification of guest login expiration after a designated period of time. Options include: 8 hours, 24 hours, 2 days, 3 days, 4 days, 7 days, and User-defined. User-defined can be designated in minutes, hours, and days. Custom Portal (Option only available when using External Portal Server authentication) Enter the IP address using the following format: 192.168.0.0. Landing Page (Option only available when using No authentication, Simple Password, or Hotspot authentication) The landing page is the page where guests are redirected after accepting the Terms of Use. There are two options available:

- Redirect to the original URL When this option is selected, guests are directed to the URL they requested after accepting the Terms of Use.

- Promotional URL When this option is selected, guests are redirected to the URL that you specify here after accepting the Terms of Use. Specify the URL with http:// in front of the Web address. Example: http://www.ubnt.com Portal Customization (Option only available when using No authentication, Simple Password, or Hotspot authentication) When enabled, allows customized portal pages to appear in place of default login pages. See Portal Customization on page 44 for details on setting up custom portal pages. Portal URL Hostname Allows the designation of a hostname for the portal URL in place of the default IP address. Paired with a SSL certificate, ensures site certificates are displayed as trusted in the guest browser. Example: www.ubnt.com Hotspot The Hotspot options are only visible when Hotspot authentication is selected. Voucher When selected, vouchers (including distributable code, duration values, and use restrictions) can be created using Hotspot Manager (see Hotspot Manager on page 42). Payment When enabled, allows payment-based authentication to be set up with your PayPal Website Payments Pro account. Payments and Transactions can be managed using Hotspot Manager (see Hotspot Manager on page 42). PayPal PayPal account details are entered here:

- Username Enter the corresponding Username.

- Password Enter the corresponding Password.

- Signature Enter the corresponding Signature for the PayPal account to be used for receiving payments. Ubiquiti Networks, Inc. 11 UniFi AP-Pro User Guide Chapter 3: Using the UniFi Controller Software When logging in with Payment-based Hotspot authentication, guests will be required to select the package type, click the payment choice, and accept the Terms of Use before gaining access to the Internet. Access Control Restricted Subnets Enter any subnets that you dont want guests to be able to access. Apply Click Apply to save changes. Settings > Admin Settings Admin Name Displays the current admin name used to log in. To change the admin name, simply enter a new name and click Apply. Password A new password can be entered in this field. Ensure that you enter the password again in the Confirm field and then click Apply to save your new password. Confirm Used to confirm your new password. Language Selects the language for use in the interface. Email Alert Select to enable email alerts and enter the administrator email address in the Send alert to email box. See Mail Server on page 10 for information on setting up the outgoing (SMTP) mail server. Apply Click Apply to save changes. Settings > Wireless Networks Wireless Configurations Name Displays the wireless network name (SSID). Security Displays the type of security being used on your wireless network. Guest Network Indicates whether the network is a guest network. Actions Select an action button to perform the desired action:

Edit Select to make changes to the wireless network settings. Delete Select to delete the wireless network. Wireless Configuration Name/SSID Allows you to edit the wireless network name (SSID). Security Selects the type of security to use on your wireless network.

- Open This option is typically only used on the Guest network. When enabled, wireless network access is open to anyone without needing a password.

- WEP WEP (Wired Equivalent Privacy) is the oldest and least secure security algorithm. WPA security methods should be used when possible. WEP Key Enter a WEP encryption key in hexadecimal format. You can enter a 64-bit or 128-bit key:

Type 64-bit 128-bit Hex 10 Hexadecimal Characters

(0-9, A-F, or a-f) Example: 00112233AA Note: You can use 5 printable characters, which will be translated to the corresponding HEX code. 26 Hexadecimal Characters

(0-9, A-F, or a-f) Example:

00112233445566778899AABBCC Note: You can use 13 printable characters, which will be translated to the corresponding HEX code. Key Index Specifies the Index of the WEP Key used. Four different WEP keys can be configured at the same time, but only one is used. The effective key is set by choosing 1, 2, 3 or 4. Ubiquiti Networks, Inc. 12 UniFi AP-Pro User Guide Chapter 3: Using the UniFi Controller Software

- WPA-Personal WPA or Wi-Fi Protected Access was developed as an encryption method stronger than WEP. WPA-Personal requires a passphrase to connect to the wireless network. Security Key Enter the passphrase that users will use to connect to the wireless network.

- WPA-Enterprise WPA Enterprise uses a RADIUS server to authenticate users on the wireless network. IP Address This is where the IP address of the RADIUS server is specified. Port The port number is entered here. By default it is 1812. Password The password used to authenticate on the RADIUS server is entered here. Guest Policy Select this option to enable guest access policies on this wireless network. Advanced VLAN To use a VLAN, select Use VLAN ID and enter the port number. Hide SSID Select this option if you dont want the SSID to be broadcast. WPA Defines supported WPA and encryption methods. User Group Allows assignment of wireless users to a specific user group. Click Apply to save any changes that you have made. Click Cancel to discard changes. Settings > Blocked Devices Displays the list of blocked wireless devices. Settings > User Groups Create Click to create a new user group. Name Enter a descriptive user group name. Bandwidth Limit (Download) When selected, allows the designation of a download bandwidth limit in Kbps. Bandwidth Limit (Upload) When selected, allows the designation of an upload bandwidth limit in Kbps.

- Create Click to create a user group.

- Cancel Click to cancel user group creation. Unblock Click to unblock a wireless device. See User/

Guest Details on page 40 for information on blocking wireless devices. Edit Click to change the name or bandwidth settings of the user group. Delete Click to delete the user group. See Configuration on page 41 for information on the application of User Groups to Users/Guests. Ubiquiti Networks, Inc. 13 UniFi AP-Pro User Guide Admin Chapter 3: Using the UniFi Controller Software The Admin tab displays server version information, allows system backups to be created and downloaded, allows system restoration from backup files, and allows configuration information to be downloaded to assist in support issues. Server Information Version The software version is displayed here. If there is an update, UniFi will automatically download it and display it here. Backup Download Backup Settings Click to download a file that contains all of your settings so you can restore them later if you choose. Restore Choose File Select this option to restore settings from a backup file that youve already downloaded. Support Info Download Support Info Select this option to download a file to your computer with information about your configuration that can be emailed to our support team. Ubiquiti Networks, Inc. 14 UniFi AP-Pro User Guide Chapter 4: Map Tab Chapter 4: Map Tab The UniFi Controller software allows you to upload custom map images of your location(s) or use Google Maps for a visual representation of your wireless network. When you initially launch the UniFi Controller application, a default map is displayed. Adding Custom Maps Once youve created the map, you can upload it to the UniFi Controller software by performing the following steps:

1. Click Configure Maps. Configure Maps button To add a custom map, you must first create the image using an illustration, image editing, or blueprint application that exports .jpg, .gif, or .png file formats. Ubiquiti Networks, Inc. 15 UniFi AP-Pro User Guide 2. Click Add a Map. Add a Map Chapter 4: Map Tab Adding a Google Map To add a Google Map to the UniFi Controller software Map view:

1. Click Configure Maps. Configure Maps button 3. Enter a map name in the Description field and click Upload my own. Click the Browse button to locate the file to use as a map (valid file formats are .jpg, .gif, and

.png). Click Continue. 2. Click Add a Map. Add a Map 4. Click Close. Ubiquiti Networks, Inc. 16 UniFi AP-Pro User Guide Chapter 4: Map Tab 3. Enter a map name in the Description field and click Use 6. You need to be signed in with a Google account to Google Maps. Click Continue. obtain a Google Maps API key. 7. Review the terms and conditions and click the checkbox next to I have read and agree with the terms and conditions. 8. Navigate back to the UniFi window and copy the address that UniFi displays in the address bar. Note: You only need to copy until the end of the address; do not include the port information. In the example below, the full address is https://192.168.25.191:8443/manage#. You only need to copy up to https://192.168.25.191. Do not include the colon or anything beyond it. 9. Navigate back to the Google Maps API Family window and paste the address into the My web site URL: box. 10. Click the Generate API Key button. 11. A new window will open, displaying your key. Highlight and copy the Google Maps API key. Google Maps API Key 4. In order to use a Google Map, you must register with Google for a Google Maps API key. To do so, click Specify API Key. 5. Click or copy and paste the Web link from the window into a new Web browser window. Do not close the UniFi window. http://code.google.com/apis/maps/signup.html 12. Navigate back to the UniFi window and paste the API Key into the API Key field. Click continue. Ubiquiti Networks, Inc. 17 UniFi AP-Pro User Guide Chapter 4: Map Tab 13. The default Google Map location will appear. Click the 16. Click Close. Set Location button in the lower left. Set Location button 14. Select Specify Address to enter an address. Type in the address and then click Go. You also have the Specify Coordinates option to enter the latitude and longitude of a specific location. 17. You can adjust the zoom using the slider on the right. Placing Access Points on the Map 1. Drag the Access Point icon(s) from the Unplaced APs list on the left to the appropriate location(s) on the map. 15. The specified location should appear. Click Save. The access point will appear in the area that you placed it. Ubiquiti Networks, Inc. 18 UniFi AP-Pro User Guide Chapter 4: Map Tab Wired/Wireless Access Point Shows the location of the Access Point on the map. Click and hold this icon to drag the Access Point to another location on the map. Click the Access Point icon to reveal additional options. Click a blank area of the map to hide them. Lock Locks the selected Access Point in the current location on the map. Details Brings up the Details window. This allows you to view Access Point settings and connected users. You can also edit the radio channel, transmit power, uplink, and device alias. Guests Displays the MAC address of guests that are connected to the guest network. Configuration Allows you to change the alias name of the device and channel setting. You can also set the transmit power to Auto, High, Medium, Low, or Custom. You can also remove the Access Point if you no longer want to manage it with the UniFi Controller software. Remove Remove the Access Point from the location on the map. Show: You can click each of the following options to display Access Point labels, details, wireless coverage, and topology on the map. Labels Displays the name applied to the Access Point. Refer to Alias under Configuration on page 33 to change a name applied to an Access Point. If no custom label is applied, the Access Points MAC address will be displayed. Details Displays the Access Point name, MAC address, transmit/receive channel, number of users connected, and number of guests connected. In the Details window, there are four tabs:

Details, Users, Guests, and Configuration. Details Displays details on the Access Point including the MAC address, model, version, IP address, uptime, connected users, and connected guests. Click Uplink (Wire) to display the speed, duplex, Down Pkts / Bytes, Up Pkts / Bytes, and Activity. Click Radio to display the channel used, transmit power, and packet information. Users Displays the hostnames of the users that are connected to the selected Access Point and the IP addresses assigned to them. You can click the hostname to display additional details of each user. A window with Details, Statistics, and Configuration is displayed. The Details tab displays the MAC address, hostname, IP address, uptime, and the name of the connected Access Point. The Statistics tab displays the channel used, signal strength, transmit and receive rates, power saving enabled or disabled, and the number of packets sent and received. You can also click History to see a sortable list of events. The Configuration tab allows you to change the alias name for the device. Ubiquiti Networks, Inc. 19 UniFi AP-Pro User Guide Coverage Displays a visual representation of the wireless range covered by the Access Point. Zoom Slider Use to zoom the map detail in and out. Chapter 4: Map Tab Topology Displays a visual representation of the network configuration and connections between Access Points. Any devices that is wirelessly connected will have a wireless icon next to it. A path of arrows will indicate which device the wireless device is downlinking from. Set Map Scale Use this option to define the scale of the map. You will draw a line and define the distance that the line represents. Setting the Map Scale 1. Click the Set Map Scale button. 2. Click and hold to draw a line in the area that you want to use to set the scale of the map. If you need to redraw the line, just click and hold again to draw a new line. Once youre happy with the line, click Next. Map: If multiple maps have been uploaded, you can select which map you want to view using this option. Configure Maps Use this option to add maps or edit the current map(s). Ubiquiti Networks, Inc. 20 UniFi AP-Pro User Guide Chapter 4: Map Tab 3. Enter the distance that the line represents in the Distance: field. The distance is specified in meters by default but you can switch to feet using the drop-down selection menu on the right. Click Next. Ubiquiti Networks, Inc. 21 UniFi AP-Pro User Guide Chapter 5: Statistics Tab Chapter 5: Statistics Tab The Statistics tab provides a visual representation of the network traffic connected to your managed APs. Charts representing the number of clients and network traffic are displayed. An hour by hour chart of the usage over the last 24 hours is also displayed on this screen. Quick Look Most Active AP Displays the most active Access Points details, including the name or MAC address of the Access Point, the total amount of data sent, and the total amount of data received. The name or MAC address of the Access Point is a clickable link that will open the device details page. See Access Point Details on page 31 for additional information. Most Active Client Displays the details of the most active, currently connected client. The name or MAC address of the client device, the total amount of data sent, and the total amount of data received are displayed here. The name or MAC address of the client device is a clickable link that will open the device details page. See User/

Guest Details on page 40 for additional information. All-Time Top Client Displays the details of the all-time most active client. The name or MAC address of the client device, the total amount of data sent, and the total amount of data received are displayed here. The name or MAC address of the client device is a clickable link that will open the device details page. See User/

Guest Details on page 40 for additional information. Clients

# of Clients Displays a visual pie chart representation of the client distribution. Place the mouse cursor over the chart for percentage details. Ubiquiti Networks, Inc. 22 UniFi AP-Pro User Guide Current Usage - Top Access Points Chapter 5: Statistics Tab

# of Clients Displays a visual pie chart representation of the client distribution on the most active Access Points. Place the mouse cursor over the chart for percentage details. Traffic Displays a visual pie chart representation of traffic on the most active Access Points. Place the mouse cursor over the chart for percentage details. Recent Activities The Recent Activities statistics can be toggled between a view for the last 24 hours and a view for the last 30 days.

# of Clients Displays a visual graph of the number of clients connected during the selected time period (last 24 hours or last 30 days). Traffic Displays a visual graph of the network traffic during the selected time period (last 24 hours or last 30 days). Ubiquiti Networks, Inc. 23 UniFi AP-Pro User Guide Chapter 6: Access Points Tab Chapter 6: Access Points Tab The Access Points tab displays a list of managed Access Points, each displaying its icon, name, IP address, status, number of clients connected, download/upload statistics, and transmit/receive channel. You can click any of these column headers to change the list order. of the Access Point (icon will Search Allows you to enter text you want to search for. Simply begin typing; there is no need to press Enter. Page Size Allows you to determine how many results are displayed per page. Select 10, 20, 30, 40, 60, or 100. Icon Displays the icon vary depending on model). Name/MAC Address Displays the hostname, alias, or MAC address of the Access Point. You can click the name to get additional details on the Access Point. IP Address Displays the IP address of the Access Point. Status Displays the connection status information. Connected Displays that the Access Point connection is physically wired. Connected (wireless) Displays that the Access Point connection is wirelessly downlinked to a physically wired Access Point. Disconnected Displays if the Access Point is unreachable by the UniFi Controller software. Disconnected Access Points will also appear under Access Points > Disconnected at the top of the interface. Isolated A managed Access Point that is unable to locate its uplink. Managed by Other Displays if the Access Point is not in the default state but it is not controlled by the UniFi Controller. Pending Approval Displays if the Access Point is in the default state and is available for adoption. Num Clients Displays the number of clients connected to the Access Point. Download Displays the total size of downloads via the Access Point. Upload Displays the total size of uploads via the Access Point. Channel Displays the transmit/receive channel being used by the Access Point. The radio band is represented as

(ng) for 2.4 GHz and (na) for 5 GHz. Actions Select an action button to perform the desired action:

Restart Restart the selected Access Point. Locate Click to locate the Access Point on the map. The button will flash green and black until the Locate button is clicked again. The LED on the Access Point will flash so that you can place it in the correct location on the map. The LED will flash until the Locate button is clicked again. Ubiquiti Networks, Inc. 24 UniFi AP-Pro User Guide Chapter 6: Access Points Tab Adopt Click to adopt an Access Point that appears under Access Points > Pending at the top of the interface. The Status will appear as Adopting until the Access Point is connected. Upgrade If a software upgrade is available for the Access Point, click Upgrade to install the latest UniFi firmware on the device. The Status will appear as Upgrading until the process is complete and the Access Points reconnects to the UniFi Controller software. Ubiquiti Networks, Inc. 25 UniFi AP-Pro User Guide Chapter 7: Users Tab Chapter 7: Users Tab The Users tab displays a list of users that are connected to the primary wireless network of the Access Point. Access Point Displays the hostname or alias of the Access Point. You can click the name to get additional details on the Access Point. Signal Displays the signal strength and type from the Access Point to the client. If a lightning bolt symbol is present, the device is in power save mode. The device will return to active mode when Down or Up activity resumes. Icon Clients 5 GHz (either 802.11a or 802.11n/a) Mode Active 5 GHz (either 802.11a or 802.11n/a) Power Save 2.4 GHz (802.11n) Active 2.4 GHz (802.11n) Power Save 2.4 GHz (802.11g) Active 2.4 GHz (802.11g) Power Save 2.4 GHz (802.11b) Active 2.4 GHz (802.11b) Power Save a a n n g g b b Down Displays the total bytes of data received by the user. Up Displays the total bytes of data sent by the user. Search Allows you to enter text you want to search for. Simply begin typing; there is no need to press Enter. 2G Select if you only want users of the 2.4 GHz wireless network displayed. 5G Select if you only want users of the 5 GHz wireless network displayed. All Select to show all users. Filter by AP Drop-down list of all available Access Points. Select one to filter the results and display only users connected to the selected Access Point. Page Size Allows you to determine how many results are displayed per page. Select 10, 20, 30, 40, 60, or 100. Name/MAC Address Displays the hostname, alias, or MAC address of the connected user. You can click the name to get additional details. IP Address Displays the IP address assigned to the user. WLAN Displays the name of the SSID (network name) of the wireless LAN (WLAN) that the user is connected to. Ubiquiti Networks, Inc. 26 UniFi AP-Pro User Guide Activity Displays the level of activity for each user. Chapter 7: Users Tab Bars Activity Level

(Bytes per second) Idle 500 8000 64000 512000 2048000 Uptime Displays the total time the user has been connected for this session. Actions Click an action button to perform the appropriate action. Block Click this button to block a specific user from accessing the Access Point. This will add the client to the Blocked Device list. Reconnect Click this button to reconnect a specific user to the Access Point. Ubiquiti Networks, Inc. 27 UniFi AP-Pro User Guide Chapter 8: Guests Tab Chapter 8: Guests Tab The Guests tab displays a list of users that have connected to the guest network of the Access Point. Access Point Displays the hostname or alias of the Access Point. You can click the name to get additional details on the Access Point. Signal Displays the signal strength and type from the Access Point to the client. If a lightning bolt symbol is present, the device is in power save mode. The device will return to active mode when Down or Up activity resumes. Icon Clients 5 GHz (either 802.11a or 802.11n/a) Mode Active 5 GHz (either 802.11a or 802.11n/a) Power Save 2.4 GHz (802.11n) Active 2.4 GHz (802.11n) Power Save 2.4 GHz (802.11g) Active 2.4 GHz (802.11g) Power Save 2.4 GHz (802.11b) Active 2.4 GHz (802.11b) Power Save a a n n g g b b Down Displays the total bytes of data received by the guest. Up Displays the total bytes of data sent by the guest. Search Allows you to enter text you want to search for. Simply begin typing; there is no need to press Enter. 2G Select if you only want guests of the 2.4 GHz wireless network displayed. 5G Select if you only want guests of the 5 GHz wireless network displayed. All Select to show all guests. Filter by AP Drop-down list of all available Access Points. Select one to filter the results and display only guests connected to the selected Access Point. Page Size Allows you to determine how many results are displayed per page. Select 10, 20, 30, 40, 60, or 100. Name/MAC Address Displays the hostname, alias, or MAC address of the connected guest. You can click the name to get additional details. Status Indicates whether the guest is authorized or not. For authorization, guests must accept the Terms of Use if the guest portal is enabled and authenticate if authentication is enabled. IP Address Displays the IP address assigned to the guest. Ubiquiti Networks, Inc. 28 UniFi AP-Pro User Guide Activity Displays the level of activity for each guest. Chapter 8: Guests Tab Bars Activity Level

(Bytes per second) Idle 500 8000 64000 512000 2048000 Uptime Displays the total time the guest has been connected for this session. Actions Click an action button to perform the appropriate action. Block Click this button to block a specific guest from accessing the Access Point. Reconnect Click this button to reconnect a specific guest to the Access Point. Authorize When a guest is in a pending state, authorization can be granted here manually. Unauthorize Removes authorization of wireless guest access and disconnects the client. Ubiquiti Networks, Inc. 29 UniFi AP-Pro User Guide Chapter 9: Offline Clients Tab Chapter 9: Offline Clients Tab The Offline Clients tab displays a list of clients that have connected to the guest or primary network of the Access Point at some time during the period specified. Down Displays the total bytes of data received by the user. Up Displays the total bytes of data sent by the user. Actions Click an action button to perform the appropriate action. Block Click this button to block a specific user from accessing the Access Point. After you have blocked a user, click unblock to allow access. Search Allows you to enter text you want to search for. Simply begin typing; there is no need to press Enter. User Select if you only want users displayed. Guest Select if you only want guests displayed. Blocked Select if you only want blocked users and guests displayed. All Select to show all users and guests. Last Seen Drop-down list that allows you to filter the results on the page based on the time the user was last seen. Select 1 day, 3 days, 7 days, 2 weeks, 1 month,

PRQWKV, or 1 year. Page Size Allows you to determine how many results are displayed per page. Select 10, 20, 30, 40, 60, or 100. Name/MAC Address Displays the hostname, alias, or MAC address of the connected user. You can click the name to get additional details. User/Guest Indicates whether the user is connected to the primary or guest network. Ubiquiti Networks, Inc. 30 Chapter 10: Access Point Details

# Users Displays the number of users connected to the primary network.

# Guests Displays the number of users connected to the guest network. Uplink (Wire) Displays details on a wired Access Point including the connection speed, duplex type, Down Pkts / Bytes in K/M, Up Pkts / Bytes in K/M, and Activity in B/sec. UniFi AP-Pro User Guide Chapter 10: Access Point Details UniFi Access Points connect to the UniFi Controller software either by Ethernet, denoted as Connected, or by a wireless connection, denoted as &RQQHFWHGZLUHOHVV. (The UniFi AP-Pro does not support wireless uplinks for the initial release, but it will with a future firmware upgrade.) Based on connection type, options under each tab vary. The upper part of the window has four clickable tabs. The bottom of the window has Locate and 5HVWDUW buttons. Use the Locate button to flash the LED on the Access Point and flash the Access Point icon on the map. Use the Restart button to restart the Access Point. The four tabs include 'HWDLOV, 8VHUV, *XHVWV, and &RQILJXUDWLRQ. Details Displays details about the Access Point. Click Overview to display the device specifics, connection details, uptime, and user statistics. Overview MAC address Displays the MAC address of the Access Point. Model Displays the model information. Version Displays the version of software used on the Access Point. IP address Displays the IP address of the Access Point. Uptime Displays the amount of time the Access Point has been running without interruption. Ubiquiti Networks, Inc. 31 UniFi AP-Pro User Guide Chapter 10: Access Point Details Radio (11n/b/g) or Radio (11n/a) Click Radio (11n/b/g) or Radio (11n/a) to display the channel and transmit/receive statistics. Channel Displays the wireless channel being used. Transmit Power Displays the EIRP in dBm. Note: If the device has an external antenna, you can place the mouse over the icon for additional details. TX Pkts / Bytes Displays the number of packets and total bytes transmitted by the Access Point. RX Pkts / Bytes Displays the number of packets and total bytes received by the Access Point. TX Retry / Dropped Displays the percentage of transmitted packets that needed to be resent and the percentage of packets that were dropped. RX Error / Dropped Displays the percentage of packets received that needed to be resent and the percentage of packets that were dropped.

# Users Displays the number of users connected to the primary network.

# Guests Displays the number of users connected to the guest network. Users Name Displays the name (MAC address if not defined) of users connected to the primary network of the selected Access Point. You can click the links under Name to display additional details of each user (see User/Guest Details on page 40 for more information). WLAN Displays the name of the SSID (network name) of the wireless LAN (WLAN) that the user is connected to. Actions Select from one of the following actions:

Block Click this button to block a specific user from accessing the Access Point. This will add the client to the Blocked Device list. Reconnect Click this button to reconnect a specific user to the Access Point. Ubiquiti Networks, Inc. 32 UniFi AP-Pro User Guide Guests Chapter 10: Access Point Details Configuration Allows you to change device configuration settings. Click the apply button to commit any changes. Config Name Displays the name (MAC address if not defined) of users connected to the guest network of the selected Access Point. You can click the links under Name to display additional details of each user (see User/Guest Details on page 40 for more information). WLAN Displays the name of the SSID (network name) of the wireless LAN (WLAN) that the user is connected to. Actions Select from one of the following actions:

Block Click this button to block a specific user from accessing the Access Point. This will add the client to the Blocked Device list. Reconnect Click this button to reconnect a specific user to the Access Point. General Settings Alias Allows you to name the device. Click Apply to save your change. Ubiquiti Networks, Inc. 33 UniFi AP-Pro User Guide Radio(s) Chapter 10: Access Point Details 11n only Only supports wireless-n devices. 11g only Only supports wireless-g devices. Click apply to save any changes that you have made. WLANs Allows the deployment of different WLANs on different Access Points. Radio (11n/b/g) or Radio (11n/a) Channel Select a channel or leave the default auto setting. You can also use the default HT20 for 20 MHz operation or HT40 for 40 MHz operation. Tx Power By default the transmit power is set to Auto. You can also manually select +LJK, 0HGLXP, /RZ or &XVWRP. High The highest TX power we can deliver. Low The lowest TX power. Medium Halfway in between High and Low. Custom Full custom setting. If the AP is using an external antenna, the $QWHQQD*DLQ field will appear, allowing you to specify the gain of the attached antenna. After applying the settings, go to Transmit Power under 'HWDLOV > 5DGLRQJE, which always shows EIRP, and place the mouse over it to display how its calculated. Compatibility (Available for QEJ only.) Selects the wireless compatibility mode. By default this is set to auto. Choose one of the following:

Auto Supports wireless b/g/n standards. 11n/11g only Only supports wireless-n and wireless-g devices. WLANs (11n/b/g) or WLANs (11n/a) Name Displays the name of the SSID (network name) of the wireless LAN (WLAN) that is available for the user to connect to. Overrides Displays SSID override information applied to the wireless LAN (WLAN) using the $FWLRQV > 2YHUULGH option. Actions Click Override to enable a VLAN, set the VLAN ID, and enter the SSID override name to apply to the wireless LAN (WLAN). Ubiquiti Networks, Inc. 34 UniFi AP-Pro User Guide Chapter 10: Access Point Details Network The Access Point can be configured to obtain an IP address automatically or configured with a static IP address. Network Settings Configure IP Select between 8VLQJ'+&3 or 6WDWLF,3:

Using DHCP Choose this option to obtain the IP address, Gateway, and DNS address dynamically from the external DHCP server. Enabled Select to enable or clear to disable override settings on the WLAN. VLAN Select to enable VLAN or clear to disable VLAN. VLAN ID The VLAN ID is a unique value assigned to each VLAN at a single device; every VLAN ID represents a different Virtual Local Area Network. A value between 2 and 4095 may be entered. For example, in a larger deployment where there are multiple buildings, its possible that a different VLAN ID is used in each building while still on the same corporate network. SSID Enter the SSID override name to apply to the wireless LAN (WLAN). PSK If the WPA-Personal security option has been applied to the WLAN under 6HWWLQJV > :LUHOHVV1HWZRUNV, the Pre-Shared Key (PSK) for the SSID specified will automatically appear in this field. Click Apply to save any changes that you have made. Click Restore to remove any overrides that were applied to the selected WLAN. Click Cancel to prevent application of any changes you have made. Ubiquiti Networks, Inc. 35 UniFi AP-Pro User Guide Chapter 10: Access Point Details Access Point - Heartbeat Missed When a wired Access Point is disconnected from the router, its state will initially change to +HDUWEHDW0LVVHG, followed by ,VRODWHG. Static IP Choose this option to assign the static IP address, Subnet mask, Gateway, Preferred DNS, and Alternate DNS for the Access Point.

- IP address Enter the IP address for the Access Point.

- Subnet mask Enter the subnet mask for the Access Point.

- Gateway Enter the gateway address.

- Preferred DNS Enter a primary DNS address.

- Alternate DNS Enter a secondary DNS address. Click apply to save any changes that you have made. Ubiquiti Networks, Inc. 36 UniFi AP-Pro User Guide Chapter 10: Access Point Details Access Point - Isolated When an Access Point is in an ,VRODWHG state, you can reestablish a connection to the UniFi Controller software using one of two methods:

Reconnect the Access Point to the router. Connect an Ethernet cable from the 6HFRQGDU\(WKHUQHW 3RUW of the isolated Access Point to the 6HFRQGDU\

(WKHUQHW3RUW of another UniFi AP-Pro that is connected to the router. Access Point - Managed by Other When an Access Point is in 0DQDJHGE\2WKHU state, this indicates that the Access Point is not in the default state but it is not controlled by the UniFi Controller. Overview MAC address Displays the MAC address of the Access Point. Model Displays the model information. Version Displays the version of software used on the Access Point. Last Seen Displays the amount of time that has passed since the Access Point was last seen. Isolated Access Point In an ,VRODWHG state, the Access Point icon will change to red/orange on the Map tab. The LED on the actual device will be steady green with occasional flashing. This Access Point doesnt provide any wireless service. Note: Do not use the )RUJHWWKLV$3 option when the Access Point is in an ,VRODWHG state. If you do, then the only way to make the Access Point accessible from the UniFi Controller is to take it down and connect it by wire. Ubiquiti Networks, Inc. 37 UniFi AP-Pro User Guide Advanced Adoption Chapter 10: Access Point Details Access Point - Pending Approval When an Access Point is in 3HQGLQJ$SSURYDO state, this indicates that the Access Point is in the default state and is available for adoption. IP The IP address and SSH port of the Access Point are populated here. Username Enter the SSH Username for management access. Password Enter the SSH Password for management access. Inform URL The URL will be populated but you may need to verify the accuracy as the system may have multiple interfaces. Adopt Click to adopt the Access Point so you can manage it using the UniFi Controller software. MAC address Displays the MAC address of the Access Point. Model Displays the model information. Version Displays the version of software used on the Access Point. Last Seen Displays the amount of time that has passed since the Access Point was last seen. Locate Click to flash the LED on the Access Point and flash the Access Point icon on the map. Adopt Click to adopt the Access Point so you can manage it using the UniFi Controller software. Ubiquiti Networks, Inc. 38 UniFi AP-Pro User Guide Forget this AP Chapter 10: Access Point Details Forget Click to remove the Access Point from management by the UniFi Controller software and to restore it to factory default settings. Note: Use caution when clicking IRUJHW. This will restore the Access Point to factory settings when in a Connected state. Do not use the )RUJHWoption when the Access Point is in an ,VRODWHG state. If you do, the only way to make the Access Point accessible from the UniFi Controller is to take it down and connect by wire. Ubiquiti Networks, Inc. 39 UniFi AP-Pro User Guide Chapter 11: User/Guest Details The User and Guest hyperlinks bring up the User/Guest Details window. There are four clickable tabs at the top of the window and two buttons located on the bottom of the window. The buttons are accessible from any of the tabs and perform the following actions:

Block Allows you to block the selected user from accessing the network. Reconnect Allows you to reconnect a user that has been blocked previously. Unauthorize (Available for guests only.) Allows you to remove authorization of wireless guest access and disconnect the client. The four tabs contain the following information:

Details Overview MAC address Displays the MAC address of the user or guest. Hostname Displays the name (if defined). IP address Displays the IP address of the Access Point. Uptime Displays the amount of time the Access Point has been running without interruption. Connected AP Displays the name or MAC address of the Access Point this user is connected to. Chapter 11: User/Guest Details Statistics ESSID Displays the wireless network name (SSID) of the network that the user is connected to. Connected AP Displays the MAC address or name of the Access Point the user is connected to. Channel Displays the channel being used for wireless communication. Signal Displays the signal level. TX Rate Displays the transmit rate. RX Rate Displays the reception rate. Activity Displays user activity. Power Save Indicates whether power saving is enabled. Received Pkts / Bytes Displays the number of packets and total bytes received by the user. Sent Pkts / Bytes Displays the number of packets and total bytes transmitted by the user. Note: The Statistics tab will only appear when the User/Guest is connected. Ubiquiti Networks, Inc. 40 UniFi AP-Pro User Guide History Chapter 11: User/Guest Details Debug Debug Allows you to force a device to connect to a specific Access Point. Date/Time Displays the date and time the user connected to the Access Point. Duration Displays the time duration that the user was connected to the Access Point. Down Displays how many bytes were downloaded by the user during the session. Up Displays how many bytes were uploaded by the user during the session. Configuration Config Alias Allows you to enter a name for the user. Click apply to save your name change. Usergroups Allows you to select the User Group to assign to the User/Guest. User Groups are set up under the Settings tab > User Groups option (see Settings > User Groups on page 13 for information on setting up User Groups). Click apply to save your changes. Ubiquiti Networks, Inc. 41 UniFi AP-Pro User Guide Chapter 12: Hotspot Manager Chapter 12: Hotspot Manager Hotspot Manager includes four main tabs when accessed by the UniFi Controller admin account. These tabs include Wireless Guests, Payments/Transactions, Vouchers, and Operator Accounts. The UniFi Controller admin can create operator accounts for the Hotspot Manager. Operator accounts are designed for use by hotels to service guests and have no access to other UniFi administrative features. Operator accounts will have access to three tabs after login: Wireless Guests, Payments/Transactions, and Vouchers. Wireless Guests Lists the Hotspots currently active wireless guests. Includes the keyword Search box and Show guests within drop-down selections (options include last 24 hours,

GD\V, GD\V, ZHHNVGD\V, and GD\V). Download Displays the total number of bytes downloaded by the guest. Upload Displays the total number of bytes uploaded by the guest. Status Displays the remaining session time for the guest. Actions Disconnect Allows you to immediately disconnect a guest. Extend Allows you to extend a guests session for an additional 24 hours every time you click this button. If you click it three times, you will extend the guest access for three more days. Payments/Transactions Lists the Hotspots payments and transactions. Includes the keyword Search box and Show guests within drop-down selections (options include last 24 hours,

GD\V, GD\V, ZHHNVGD\V, and GD\V). Name/MAC Address Displays the connected guests device name or MAC address. Package Displays the type of package that was purchased (if applicable). Amount Displays amount paid for access (if applicable). Authorized By Displays authorization method or none. Time Displays the time and date of the transaction. Last Name Displays the users last name. First Name Displays the users first name. Package Displays the package description. Amount Displays the amount of the transaction. Extra Info If the user paid via PayPal, the Extra Info field displays the email address associated with the PayPal account. If the user paid via credit card, the Extra Info field will display the type of credit card and the last four digits of the credit card used. Ubiquiti Networks, Inc. 42 UniFi AP-Pro User Guide Chapter 12: Hotspot Manager Status Displays the status of the transaction. Actions Allows you to refund a customer if necessary by clicking the 5HIXQGbutton. Vouchers Allows the creation of vouchers including a distributable code, duration values, and use restrictions. Operator Accounts Allows the creation of Operator Accounts that can log in to Hotspot Manager to manage wireless guests, payments/

transactions, and vouchers. Search Enter keywords in the Search box to find a specific operator account based on Name, 3DVVZRUG, or Notes values. Actions Click Delete to remove an operator. Account Enter a name for the operator. The Account can only be A-Z, a-z, or 0-9. No spaces are allowed. Password Enter a password for the operator. The 3DVVZRUG has to start with A-Z, a-z, or 0-9. The other characters can only be printable ASCII characters. Note If desired, enter a note to identify or describe the operator. Create Operator Click Create Operator to create the operator account as specified. To test the operator account, log out of the UniFi Controller software and log in using the operator credentials. Only the Wireless Guests, Payments/Transactions, and Vouchers tabs will appear. Search Enter keywords in the Search box to find a specific voucher based on &RGH, Create Time, or Note values. Print all Unused Vouchers Click Print All Unused Vouchers to send a page to your printer with voucher code and validity details. Code Displays a list of active voucher codes. Create Time Displays the time and date the voucher was created. Note Displays any notes that were added using the $GG Notes option during voucher creation. Duration Displays the duration of minutes, hours, or days that the voucher enables the user to access the Internet. Status Indicates whether it is a single-use or multi-use voucher. Actions Revoke Immediately deactivates the selected voucher. Print Batch Prints the selected voucher. Active Voucher Page Slider Adjust the slider from left to right to view all Active Vouchers. Create Vouchers Includes the following:

Create __ Specify the number of vouchers to create. __ vouchers Choose whether the voucher can be used One-time or for Multi-use. for __ Choose how long the voucher is valid (options include 8 hours, 24 hours, GD\V, GD\V,GD\V, GD\Vor 8VHUGHILQHG). Add Notes Select to add a note specific to the batch of vouchers created. Click Create Vouchers to create the vouchers as specified. Ubiquiti Networks, Inc. 43 UniFi AP-Pro User Guide Appendix A: Portal Customization Overview With Portal Customization, the UniFi Controller software allows complete branding of a portal implementation, allowing you to white label your wireless internet service as if you had developed it yourself. In order to provide the maximum flexibility in your branding effort, the UniFi Controller software provides total access to the portal directory on the system in which it is installed. This open architecture allows you to include unlimited content while keeping development simple through the use of plain .html (hand code or use any editor of your choice). Testing is simple and immediate by reloading changes from any browser. Enabling Portal Customization By default, Portal Customization is disabled in all Guest Portal implementations. See Settings > Guest Control on page 10 for more information on enabling the Guest Portal for the following authentication and landing page options: No authentication, Simple Password, Hotspot. To enable Portal Customization, perform the following steps:

1. Go to Settings and select Guest Control. 2. Make sure that the Guest Portal is enabled and select an authentication method. 3. Select Enable portal customization and click Apply. Appendix A: Portal Customization Viewing the Default Portal Once Guest Portal > Portal Customization is enabled, connect to the Guest Network SSID as shown below, depending on your platform. Windows 1. Go to Connect to Network.

- Windows 7 Right-click the Network icon.

- Windows Vista Go to Start > Connect To.

- Windows XP Right-click the Wireless Network icon in the System Tray (lower right corner of the screen) and then click View Available Wireless Networks. 2. Select the Guest Network SSID and click Connect. 3. Depending on the security type applied to the network, enter the security key or password. Click OK or Connect. 4. Launch your Web browser and you will be directed to the default portal page for the authentication type configured on the Guest Portal (see Settings > Guest Control on page 10 for screenshots of default portal pages by authentication method). Mac 1. Click the AirPort of the screen). icon in the menu bar (top left side 2. Select the Guest Network SSID and click Connect. 3. Depending on the security type applied to the 4. Once connected, the AirPort network, enter the security key or password. Click OK. icon will change from gray to solid black. The number of black lines indicates the signal strength. 5. Launch your Web browser and you will be directed to the default portal page for the authentication type configured on the Guest Portal (see Settings > Guest Control on page 10 for screenshots of default portal pages by authentication method). Setup The html and css files are located on the system that the UniFi Controller software has been installed on. The file paths are in the following locations:

Mac:

/Applications/UniFi.app/Contents/Resources/data/portal Windows:

<Drive_Letter>:\Users\<Username>\Ubiquiti UniFi\data\

portal For specific instructions on accessing the files, refer to the specific operating system:

Ubiquiti Networks, Inc. 44 UniFi AP-Pro User Guide Mac 1. Navigate to Go > Applications. Appendix A: Portal Customization 6. Double-click the portal folder to open it. Windows The Windows files are located in the following location:

<Drive_Letter>:\Users\<Username>\Ubiquiti UniFi\

data\portal Customizable Default Files The following default customizable html and css files can be found in the portal folder:

index.html The main landing page. payment.html Used for credit card information submission. Requires https and also serves as an example of an additional .html page. fail.html Page displayed when there is an error handling a guest login. reset-min.css styles.css Another important customizable file is located in the bundle folder. The messages.properties file can be edited with a text editor such as TextEdit. This defines package costs, length of access, package titles, and how the charge will appear on a customers credit card. Error messages are also defined here. 2. Control-click the UniFi application and select Show Package Contents. 3. Double-click the Contents folder to open it. 4. Double-click the Resources folder to open it. 5. Double-click the data folder to open it. Additional details on portal customization can be found in our forum at:

http://wiki.ubnt.com/UniFi_FAQ#Hotspot_-_Portal_ Customization Ubiquiti Networks, Inc. 45 UniFi AP-Pro User Guide Appendix B: UniFi Discovery Utility Overview The Ubiquiti UniFi Discovery Utility includes tools that allow the discovery and management of UniFi Enterprise WiFi System Access Points. It is installed automatically as part of the UniFi Controller software installation process. See Software Installation on page 5 for more information. Launching the UniFi Discovery Utility Mac Users From the Finder, click Go > Applications and double-click the UniFi-Discover.app icon. PC Users Go to Start > All Programs > Ubiquiti UniFi and double-click the UniFi-Discover icon. Appendix B: UniFi Discovery Utility UniFi Discovery Utility Interface Upon launch, the UniFi Discovery Utility listens to Layer-2 broadcast/multicast beacons from UniFi Access Points in both a factory default state and an unmanaged state

(adopted but unable to contact the UniFi Controller software). MAC Address Displays the MAC address and alias (in parentheses if specified see Configuration on page 33 for details on specifying an alias) of the Access Point. IP Address Displays the IP address of the Access Point and the method used by the Access Point to obtain an IP address (in parentheses as DHCP or Static). Model Displays the model name of the UniFi WiFi System Access Point. Version The software version installed on the Access Point is displayed here. Status Displays the current status of the Access Point. Possible statuses include: Pending, Managed/Adopted, Login Failed, and IP Unreachable. Locate Click to locate the Access Point. The following window appears:

The LED on the Access Point will flash so that it can be identified from other Access Points. If the Access Points status requires the entry of a username and password, enter them before clicking Apply. Ubiquiti Networks, Inc. 46 UniFi AP-Pro User Guide Appendix B: UniFi Discovery Utility Manage Click to set the inform URL, allowing the Access Point to be managed by an instance of the UniFi Controller software running in a NOC or in the cloud (see Network Topology Requirements on page 1 for a visual representation of this configuration). The following window appears:

Reboot Click to reboot Access Point. The following window appears:

If the Access Points status requires the entry of a username and password, enter them before clicking Apply. Enter the URL, port, and path to the instance of the UniFi Controller software that the Access Point is to be managed by. If the Access Points status requires the entry of a username and password, enter them before clicking Apply. Reset Click to restore the Access Point to factory default settings. The following window appears:

If the Access Points status requires the entry of a username and password, enter them before clicking Apply. Ubiquiti Networks, Inc. 47 UniFi AP-Pro User Guide Appendix C: Specifications UniFi AP-Outdoor (UAP-Pro) Appendix C: Specifications Dimensions Weight Networking Interface Buttons Wi-Fi Standards Power Method Power Supply Max. Power Consumption BSSID Power Save Wireless Security

&HUWLFDWLRQV Mounting Operating Temperature Operating Humidity Antennas 2.4 GHz 5 GHz Max. TX Power 2.4 GHz 5 GHz VLAN Advanced QoS

*XHVW7UDIF,VRODWLRQ WMM Concurrent Clients Standard 802.11a 802.11n, 2.4 GHz (3x3) 802.11n, 5 GHz (2x2) 802.11b 802.11g 20 x 20 x 3.65 cm 298 g (358 g with Mounting Kits)

(2) 10/100/1000 Ethernet Ports Reset 802.11 a/b/g/n Passive Power over Ethernet (48V), 802.3af Supported 48V, 0.5A PoE Adapter Included 12W Up to Four per Radio Supported WEP, WPA-PSK, WPA-TKIP, WPA2 AES, 802.11i CE, FCC, IC Wall/Ceiling (Kits Included)

-10 to 70C (14 to 158 F) 5 - 80% Condensing 3 Integrated (Supports 3x3 MIMO with Spatial Diversity) 2 Integrated (Supports 2x2 MIMO with Spatial Diversity)

$GYDQFHG7UDIF0DQDJHPHQW Supported Data Rates (Mbps) 30 dBm 22 dBm 802.1Q Per-User Rate Limiting Supported Voice, Video, Best Effort, and Background 200+

Data Rates 6, 9, 12, 18, 24, 36, 48, 54 Mbps 6.5 Mbps to 450 Mbps (MCS0 - MCS23, HT 20/40) 6.5 Mbps to 300 Mbps (MCS0 - MCS15, HT 20/40) 1, 2, 5.5, 11 Mbps 6, 9, 12, 18, 24, 36, 48, 54 Mbps Ubiquiti Networks, Inc. 48 Appendix D: Safety Notices UniFi AP-Pro User Guide Appendix D: Safety Notices 1. Read, follow, and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer. WARNING: Do not use this product in location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. Electrical Safety Information 1. Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturers label. Connection to a different power source than those specified may result in improper operation, damage to the equipment or pose a fire hazard if the limitations are not followed. 2. There are no operator serviceable parts inside this equipment. Service should be provided only by a qualified service technician. 3. This equipment is provided with a detachable power cord which has an integral safety ground wire intended for connection to a grounded safety outlet. a. Do not substitute the power cord with one that is not the provided approved type. Never use an adapter plug to connect to a 2-wire outlet as this will defeat the continuity of the grounding wire. b. The equipment requires the use of the ground wire as a part of the safety certification, modification or misuse can provide a shock hazard that can result in serious injury or death. c. Contact a qualified electrician or the manufacturer if there are questions about the installation prior to connecting the equipment. d. Protective earthing is provided by Listed AC adapter. Building installation shall provide appropriate short-circuit backup protection. e. Protective bonding must be installed in accordance with local national wiring rules and regulations. Ubiquiti Networks, Inc. 49 Appendix E: Warranty Disclaimer UBIQUITI NETWORKS does not warrant that the operation of the products is error-free or that operation will be uninterrupted. In no event shall UBIQUITI NETWORKS be responsible for damages or claims of any nature or description relating to system performance, including coverage, buyers selection of products for buyers application and/or failure of products to meet government or regulatory requirements. Returns In the unlikely event a defect occurs, please work through the dealer or distributor from which this product was purchased. UniFi AP-Pro User Guide Appendix E: Warranty General Warranty UBIQUITI NETWORKS, Inc (UBIQUITI NETWORKS) represents and warrants that the Products furnished hereunder shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NETWORKS under normal use and operation. UBIQUITI NETWORKS sole and exclusive obligation under the foregoing warranty shall be to repair or replace, at its option, any defective Product that fails during the warranty period. The expense of removal and reinstallation of any item is not included in this warranty. The foregoing warranty is exclusive and in lieu of all other warranties, express or implied, including the implied warranties of merchantability and fitness for a particular purpose and any warranties arising from a course of dealing, usage or trade practice with respect to the products. Repair or replacement in the manner provided herein shall be the sole and exclusive remedy of Buyer for breach of warranty and shall constitute fulfillment of all liabilities of UBIQUITI NETWORKS with respect to the quality and performance of the Products. UBIQUITI NETWORKS reserves the right to inspect all defective Products (which must be returned by Buyer to UBIQUITI NETWORKS factory freight prepaid). No Products will be accepted for replacement or repair without obtaining a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS. Products returned without an RMA number will not be processed and will be returned to Buyer freight collect. UBIQUITI NETWORKS shall have no obligation to make repairs or replacement necessitated by catastrophe, fault, negligence, misuse, abuse, or accident by Buyer, Buyers customers or any other parties. The warranty period of any repaired or replaced. Product shall not extend beyond its original term. Warranty Conditions The foregoing warranty shall apply only if:

(I) The Product has not been subjected to misuse, neglect or unusual physical, electrical or electromagnetic stress, or some other type of accident.

(II) No modification, alteration or addition has been made to the Product by persons other than UBIQUITI NETWORKS or UBIQUITI NETWORKS authorized representatives or otherwise approved by UBIQUITI NETWORKS.

(III) The Product has been properly installed and used at all times in accordance, and in all material respects, with the applicable Product documentation.

(IV) All Ethernet cabling runs use CAT5 (or above) shielded cabling. Ubiquiti Networks, Inc. 50 Appendix F: Compliance Information Cet appareil est conforme la norme RSS Industrie Canada exempts de licence norme(s). Son fonctionnement est soumis aux deux conditions suivantes:

1. cet appareil ne peut pas provoquer dinterfrences et 2. cet appareil doit accepter toute interfrence, y compris les interfrences qui peuvent causer un mauvais fonctionnement du dispositif. RF Exposure Warning The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be located or operating in conjunction with any other antenna or transmitter, except as listed for this products certification. Les antennes utilises pour ce transmetteur doivent tre install en considrant une distance de sparation de toute personnes dau moins 20 cm et ne doivent pas tre localis ou utilis en conflit avec tout autre antenne ou transmetteur, excluant la liste de certification de ce produit. CE Marking CE marking on this product represents the product is in compliance with all directives that are applicable to it. Alert sign! Follows CE marking Alert sign must be indicated if a restriction on use applied to the product and it must follow the CE marking. UniFi AP-Pro User Guide Appendix F: Compliance Information FCC Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operations of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. For MPE and antenna usage details, please visit our website at www.ubnt.com/products Industry Canada This Class A digital apparatus complies with Canadian ICES-003. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference, and 2. this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil numrique de la classe A est confrome la norme NMB-003 Canada. Pour rduire le risque dinterfrence aux autres utilisateurs, le type dantenne et son gain doivent tre choisies de faon que la puissance isotrope rayonne quivalente (PIRE) ne dpasse pas ce qui est ncessaire pour une communication russie. Ubiquiti Networks, Inc. 51 UniFi AP-Pro User Guide Appendix F: Compliance Information detallada sobre la eliminacin segura de su aparato usado, consulte a las autoridades locales, al servicio de recogida y eliminacin de residuos de su zona o pregunte en la tienda donde adquiri el producto. Franais La directive europenne 2002/96/CE exige que lquipement sur lequel est appos ce symbole sur le produit et/ou son emballage ne soit pas jet avec les autres ordures mnagres. Ce symbole indique que le produit doit tre limin dans un circuit distinct de celui pour les dchets des mnages. Il est de votre responsabilit de jeter ce matriel ainsi que tout autre matriel lectrique ou lectronique par les moyens de collecte indiqus par le gouvernement et les pouvoirs publics des collectivits territoriales. Llimination et le recyclage en bonne et due forme ont pour but de lutter contre limpact nfaste potentiel de ce type de produits sur lenvironnement et la sant publique. Pour plus dinformations sur le mode dlimination de votre ancien quipement, veuillez prendre contact avec les pouvoirs publics locaux, le service de traitement des dchets, ou lendroit o vous avez achet le produit. Italiano La direttiva europea 2002/96/EC richiede che le apparecchiature contrassegnate con questo simbolo sul prodotto e/o sullimballaggio non siano smaltite insieme ai rifiuti urbani non differenziati. Il simbolo indica che questo prodotto non deve essere smaltito insieme ai normali rifiuti domestici. responsabilit del proprietario smaltire sia questi prodotti sia le altre apparecchiature elettriche ed elettroniche mediante le specifiche strutture di raccolta indicate dal governo o dagli enti pubblici locali. Il corretto smaltimento ed il riciclaggio aiuteranno a prevenire conseguenze potenzialmente negative per lambiente e per la salute dellessere umano. Per ricevere informazioni pi dettagliate circa lo smaltimento delle vecchie apparecchiature in Vostro possesso, Vi invitiamo a contattare gli enti pubblici di competenza, il servizio di smaltimento rifiuti o il negozio nel quale avete acquistato il prodotto. RoHS/WEEE Compliance Statement English European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/

or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. For more detailed information about the disposal of your old equipment, please contact your local authorities, waste disposal service, or the shop where you purchased the product. Deutsch Die Europische Richtlinie 2002/96/EC verlangt, dass technische Ausrstung, die direkt am Gert und/oder an der Verpackung mit diesem Symbol versehen ist , nicht zusammen mit unsortiertem Gemeindeabfall entsorgt werden darf. Das Symbol weist darauf hin, dass das Produkt von regulrem Haushaltmll getrennt entsorgt werden sollte. Es liegt in Ihrer Verantwortung, dieses Gert und andere elektrische und elektronische Gerte ber die dafr zustndigen und von der Regierung oder rtlichen Behrden dazu bestimmten Sammelstellen zu entsorgen. Ordnungsgemes Entsorgen und Recyceln trgt dazu bei, potentielle negative Folgen fr Umwelt und die menschliche Gesundheit zu vermeiden. Wenn Sie weitere Informationen zur Entsorgung Ihrer Altgerte bentigen, wenden Sie sich bitte an die rtlichen Behrden oder stdtischen Entsorgungsdienste oder an den Hndler, bei dem Sie das Produkt erworben haben. Espaol La Directiva 2002/96/CE de la UE exige que los equipos que lleven este smbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El smbolo indica que el producto en cuestin debe separarse de los residuos domsticos convencionales con vistas a su eliminacin. Es responsabilidad suya desechar este y cualesquiera otros aparatos elctricos y electrnicos a travs de los puntos de recogida que ponen a su disposicin el gobierno y las autoridades locales. Al desechar y reciclar correctamente estos aparatos estar contribuyendo a evitar posibles consecuencias negativas para el medio ambiente y la salud de las personas. Si desea obtener informacin ms Ubiquiti Networks, Inc. 52 Appendix G: Declaration of Conformity Malti

[Maltese]

Hawnhekk, UBIQUITI NETWORKS, jiddikjara li dan UBIQUITI NETWORKS device, jikkonforma mal- ti ijiet essenzjali u ma provvedimenti o rajn relevanti li hemm fid-Dirrettiva 1999/5/EC. Norsk

[Norwegian]

UBIQUITI NETWORKS erklrer herved at utstyret UBIQUITI NETWORKS device, er i samsvar med de grunnleggende krav og vrige relevante krav i direktiv 1999/5/EF. Slovensky

[Slovak]

UBIQUITI NETWORKS t mto vyhlasuje, e UBIQUITI NETWORKS device, sp a zkladn po iadavky a v etky prslu n ustanovenia Smernice 1999/5/ES. Svenska

[Swedish]

Espaol

[Spanish]

Polski

[Polish]

Hrmed intygar UBIQUITI NETWORKS att denna UBIQUITI NETWORKS device, str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG. Por medio de la presente UBIQUITI NETWORKS declara que el UBIQUITI NETWORKS device, cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Niniejszym, firma UBIQUITI NETWORKS o wiadcza, e produkt serii UBIQUITI NETWORKS device, spenia zasadnicze wymagania i inne istotne postanowienia Dyrektywy 1999/5/EC. Portugus

[Portuguese]

UBIQUITI NETWORKS declara que este UBIQUITI NETWORKS device, est conforme com os requisitos essenciais e outras disposies da Directiva 1999/5/CE. Romn

[Romanian]

Prin prezenta, UBIQUITI NETWORKS declar c acest dispozitiv UBIQUITI NETWORKS este n conformitate cu cerinele eseniale i alte prevederi relevante ale Directivei 1999/5/CE. UniFi AP-Pro User Guide Appendix G: Declaration of Conformity esky

[Czech]

Dansk

[Danish]

Nederlands

[Dutch]

English Eesti

[Estonian]

Suomi

[Finnish]

Franais

[French]

Deutsch

[German]

[Greek]

UBIQUITI NETWORKS tmto prohla uje, e tento UBIQUITI NETWORKS device, je ve shod se zkladnmi po adavky a dal mi p slu n mi ustanovenmi sm rnice 1999/5/ES. Undertegnede UBIQUITI NETWORKS erklrer herved, at flgende udstyr UBIQUITI NETWORKS device, overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF. Hierbij verklaart UBIQUITI NETWORKS dat het toestel UBIQUITI NETWORKS device, in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Bij deze verklaart UBIQUITI NETWORKS dat deze UBIQUITI NETWORKS device, voldoet aan de essentile eisen en aan de overige relevante bepalingen van Richtlijn 1999/5/EC. Hereby, UBIQUITI NETWORKS, declares that this UBIQUITI NETWORKS device, is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/

EC. Kesolevaga kinnitab UBIQUITI NETWORKS seadme UBIQUITI NETWORKS device, vastavust direktiivi 1999/5/E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. UBIQUITI NETWORKS vakuuttaa tten ett UBIQUITI NETWORKS device, tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. Par la prsente UBIQUITI NETWORKS dclare que lappareil UBIQUITI NETWORKS, device est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Par la prsente, UBIQUITI NETWORKS dclare que ce UBIQUITI NETWORKS device, est conforme aux exigences essentielles et aux autres dispositions de la directive 1999/5/CE qui lui sont applicables. Hiermit erklrt UBIQUITI NETWORKS, dass sich diese UBIQUITI NETWORKS device, in bereinstimmung mit den grundlegenden Anforderungen und den anderen relevanten Vorschriften der Richtlinie 1999/5/EG befindet. (BMWi) Hiermit erklrt UBIQUITI NETWORKS die bereinstimmung des Gertes UBIQUITI NETWORKS device, mit den grundlegenden Anforderungen und den anderen relevanten Festlegungen der Richtlinie 1999/5/EG. (Wien) UBIQUITI NETWORKS UBIQUITI NETWORKS device, 1995/5/. Magyar

[Hungarian]

Alulrott, UBIQUITI NETWORKS nyilatkozom, hogy a UBIQUITI NETWORKS device, megfelel a vonatkoz alapvet kvetelmnyeknek s az 1999/5/EC irnyelv egyb elrsainak. slenska

[Icelandic]

Hr me l sir UBIQUITI NETWORKS yfir v a UBIQUITI NETWORKS device, er samrmi vi grunnkrfur og a rar krfur, sem ger ar eru tilskipun 1999/5/EC. Italiano

[Italian]

Latviski

[Latvian]

Con la presente UBIQUITI NETWORKS dichiara che questo UBIQUITI NETWORKS device, conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/

CE. Ar o UBIQUITI NETWORKS deklar , ka UBIQUITI NETWORKS device, atbilst Direkt vas 1999/5/EK b tiskaj m pras b m un citiem ar to saist tajiem noteikumiem. Lietuvi

[Lithuanian]

UBIQUITI NETWORKS deklaruoja, kad is UBIQUITI NETWORKS renginys atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Ubiquiti Networks, Inc. 53 Appendix H: Contact Information UniFi AP-Pro User Guide Appendix H: Contact Information Ubiquiti Networks Support Ubiquiti Support Engineers are located around the world and are dedicated to helping customers resolve software, hardware compatibility, or field issues as quickly as possible. We strive to respond to support inquiries within a 24-hour period. Email: support@ubnt.com Phone: 408-942-1153 (9 a.m. - 5 p.m. PST) Online Resources Wiki Page: wiki.ubnt.com Support Forum: forum.ubnt.com Downloads: downloads.ubnt.com 91 E. Tasman Drive San Jose, CA 95134 www.ubnt.com 2012 Ubiquiti Networks, Inc. All rights reserved. UniFi and Ubiquiti Networks are trademarks of Ubiquiti Networks, Inc. Google Maps is a trademark of Google, Inc. PayPal is a trademark of PayPal, Inc. WPA and WPA2 are trademarks of the Wi-Fi Alliance. Ubiquiti Networks, Inc. JL012 54

Comments

Related Exhibits

External Photos	ID Label/Location Infos		Internal Photos

This product uses the FCC Data API but is not endorsed or certified by the FCC