WPSGTAG01 LoRa Tag User Manual

LoRa Tag User Manual Product Name: LoRa Tag Model No.: WP-SG-TAG-01 Version: 1.0 Universal Global Scientific Industrial Co., Ltd. Doc No. Document release by WSS2/WP1/SW Date. 2018/12/04 Rev Page 1.0 2 Description Lora Tag User Manual Amendment Records Item:

Date:

Revision: Page:

Change Description:

Changed by:

1 11/28/2018 1.0 All Initial release Andy The content of this document is to be treaded as strictly confidential and is not to be disclosed, reproduced or used, except as authorized in writing by Universal Scientific Industrial Co.,Ltd. Copyright(c) 2016 Universal Scientific Industrial Co.,Ltd. Universal Global Scientific Industrial Co., Ltd. Doc No. Document release by WSS2/WP1/SW Date. 2018/12/04 Rev Page 1.0 3 Description Lora Tag User Manual Contents Contents .............................................................................................................................................. 3 1. Tag Unit Overview ...................................................................................................................... 4 2. How to use the Tag ..................................................................................................................... 5 3. Operation Frequency .................................................................................................................. 6 4. Operation Mode .......................................................................................................................... 7 4.1 POWER UP Mode ................................................................................................................. 7 4.2 STORAGE Mode ................................................................................................................... 8 4.3 UNBOX Mode ........................................................................................................................ 8 4.4 EVENT Mode ......................................................................................................................... 8 4.5 STATUS Mode ....................................................................................................................... 9 The content of this document is to be treaded as strictly confidential and is not to be disclosed, reproduced or used, except as authorized in writing by Universal Scientific Industrial Co.,Ltd. Copyright(c) 2016 Universal Scientific Industrial Co.,Ltd. Universal Global Scientific Industrial Co., Ltd. Doc No. Document release by WSS2/WP1/SW Date. 2018/12/04 Rev Page 1.0 4 Description LoRa Tag User Manual Product Name: LoRa Tag Model No.: WP-SG-TAG-01 FCC ID: COF-WPSGTAG01 3 4 6 5 1 7 1. Tag Unit Overview 1. Antenna 2. 2D code with serial number 3. S1 Trace 4. S2 Pads 5. Imprint Battery 6. PWR+ Pad (+3.3V) 7. PWR- Pad (GND) Imprint Battery 2 The content of this document is to be treaded as strictly confidential and is not to be disclosed, reproduced or used, except as authorized in writing by Universal Scientific Industrial Co.,Ltd. Copyright(c) 2016 Universal Scientific Industrial Co.,Ltd. Universal Global Scientific Industrial Co., Ltd. Doc No. Document release by WSS2/WP1/SW Date. 2018/12/04 Description LoRa Tag User Manual Rev Page 1.0 5 2. How to use the Tag Scan the 2D barcode using mobile phone at first and a web page will pop up, then peel off the label from the poster, you may get a coupon from the web page The content of this document is to be treaded as strictly confidential and is not to be disclosed, reproduced or used, except as authorized in writing by Universal Scientific Industrial Co.,Ltd. Copyright(c) 2016 Universal Scientific Industrial Co.,Ltd. Universal Global Scientific Industrial Co., Ltd. Doc No. Document release by WSS2/WP1/SW Date. 2018/12/04 Description LoRa Tag User Manual Rev Page 1.0 6 3. Operation Frequency There are 64 channels for tag use, and the channel/frequency are showed as below table and the bandwidth on each frequency is 125KHz. 64 Channels are provided for Hopping Mode (125kHz Bandwidth):

Channel Freq. (MHz) Channel Freq. (MHz) Channel Freq. (MHz) Channel Freq. (MHz) 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7 903.9 904.1 904.3 904.5 904.7 904.9 905.1 905.3 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 905.5 905.7 905.9 906.1 906.3 906.5 906.7 906.9 907.1 907.3 907.5 907.7 907.9 908.1 908.3 908.5 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 908.7 908.9 909.1 909.3 909.5 909.7 909.9 910.1 910.3 910.5 910.7 910.9 911.1 911.3 911.5 911.7 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 911.9 912.1 912.3 912.5 912.7 912.9 913.1 913.3 913.5 913.7 913.9 914.1 914.3 914.5 914.7 914.9 The content of this document is to be treaded as strictly confidential and is not to be disclosed, reproduced or used, except as authorized in writing by Universal Scientific Industrial Co.,Ltd. Copyright(c) 2016 Universal Scientific Industrial Co.,Ltd. Universal Global Scientific Industrial Co., Ltd. Doc No. Document release by WSS2/WP1/SW Date. 2018/12/04 Description LoRa Tag User Manual Rev Page 1.0 7 4. Operation Mode There are 5 operation modes below in the tag life cycle. UNBOX MODE POWER UP STORAGE MODE MODE EVENT MODE STATUS MODE 4.1 POWER UP Mode Started when power on, and will stopped after 5 ALIVE packets sent. Packet Duty Cycle:

1 packet per 5 seconds Packet Example:

"datr":"SF7BW125","addr":44012345, "port":59,"data":02000001B318 Payload Format:

Port: 59 BYTE 1 (bit7:0): Major Version BYTE 2 (bit7:0): Minor Version BYTE 3 (bit7:0): Patch Version BYTE 4 (bit7:4): S2 State, 0: Low Level, 1: High Level (Triggered) BYTE 4 (bit3:0): S1 State, 0: Low Level, 1: High Level (Triggered) BYTE 5 (bit7:0): VCC voltage (+150 = Real VCC Voltage) BYTE 6 (bit7:0): Temperature The content of this document is to be treaded as strictly confidential and is not to be disclosed, reproduced or used, except as authorized in writing by Universal Scientific Industrial Co.,Ltd. Copyright(c) 2016 Universal Scientific Industrial Co.,Ltd. Universal Global Scientific Industrial Co., Ltd. Doc No. Document release by WSS2/WP1/SW Date. 2018/12/04 Description LoRa Tag User Manual Rev Page 1.0 8 4.2 STORAGE Mode Started after 5 ALIVE packets sent in power up mode, and will stop when S1 or S2 be triggered. No any TX & RX in the storage mode. 4.3 UNBOX Mode Started when S1 be triggered and will move to EVENT mode after 1 hour. Packet Duty Cycle:

1 packet per 20 seconds in the initial hour Packet Example:

"datr":"SF7BW125",addr":44012345, "port":60,"data":B318 Payload format:

Port: 60 BYTE 1 (bit7:0): VCC voltage (+150 = Real VCC Voltage) BYTE 2 (bit7:0): Temperature 4.4 EVENT Mode Started at the end of UNBOX mode until S2 be triggered. Packet Duty Cycle:

1 packet per hour Packet Example:

"datr":"SF7BW125",addr":44012345, "port":60,"data":B318 Payload format:

Port: 60 BYTE 1 (bit7:0): VCC voltage (+150 = Real VCC Voltage) BYTE 2 (bit7:0): Temperature The content of this document is to be treaded as strictly confidential and is not to be disclosed, reproduced or used, except as authorized in writing by Universal Scientific Industrial Co.,Ltd. Copyright(c) 2016 Universal Scientific Industrial Co.,Ltd. Universal Global Scientific Industrial Co., Ltd. Doc No. Document release by WSS2/WP1/SW Date. 2018/12/04 Description LoRa Tag User Manual Rev Page 1.0 9 4.5 STATUS Mode Started when S2 be triggered until no battery. Packet Duty Cycle:

1 packet per 1 minute Packet Example:

"datr":"SF7BW125",addr":44012345, "port": 61,"data": 00000000B318 Payload format:

Port: 61 BYTE 1 (bit7:0): bit 31:24 of Frame Count BYTE 2 (bit7:0): bit 23:24 of Frame Count BYTE 3 (bit7:0): bit 15:8 of Frame Count BYTE 4 (bit7:0): bit 7:0 of Frame Count BYTE 5 (bit7:0):VCC voltage (+150 = Real VCC Voltage) BYTE 6 (bit7:0): Temperature The content of this document is to be treaded as strictly confidential and is not to be disclosed, reproduced or used, except as authorized in writing by Universal Scientific Industrial Co.,Ltd. Copyright(c) 2016 Universal Scientific Industrial Co.,Ltd. Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 5mm between the radiator & your body.