62400 NevoCL Users Manual

NevoQ50 provides fully-customizable control of all of your home theater devices. Its touch-sensitive screen is software-based, so your installer/

integrator can include just those controls you actually use. Before You Use NevoQ50 Please ensure your NevoQ50 is fully charged before use. NevoQ50 Universal Controller Charging Cradle AC Power Adapter; varies by country To charge your NevoQ50:

1. Connect the power adapter to the charging cradle and plug the adapter into a wall outlet. 2. Power on and dock NevoQ50 to begin charging the battery. If it has not already been charged, it will take 3-4 hours to fully charge the battery the first time. Recharging NevoQ50 NevoQ50 has a built-in Lithium-ion rechargeable battery. NevoQ50 beeps and displays a warning message when the battery is running low. You should dock NevoQ50 at this time to charge the battery. You can dismiss the warning message by clicking OK; if you do so and the battery power becomes critically low, NevoQ50 will beep and display a critical low battery warning message. You cannot dismiss this message and should dock NevoQ50 immediately. To dock NevoQ50, simply set the controller in the charging cradle. When it is correctly docked, the blue light will appear on the bottom of the remote. About Battery Life As with all battery-operated devices, battery life will vary depending on use. It is a good practice to keep NevoQ50 in its charging cradle when you are not using it. Getting to Know NevoQ50 NevoQ50 offers the following types of controls:

Touchscreen: To use the touchscreen, gently touch the buttons that appear on it. If you prefer, slide the stylus from its storage port on the bottom of NevoQ50:

Using the stylus, gently tap buttons on the touchscreen to control your home theater and home automation devices. You may prefer to always use the stylus when you are configuring settings. Talk with your installer/integrator for more information on these settings. Stylus NevoQ50 Keys: The keys on NevoQ50 have been customized to your preference by your installer/integrator. An additional set of unlabeled keys (function keys) appear immediately below the touchscreen, above the hard buttons. A label appears on the touchscreen above them to indicate the functions assigned to those keys. LEFT SIDE BACK On/Off Switch up=ON down=OFF Function Keys Hard Keys RIGHT SIDE Toggle Wheel Reset Button USB Port Programmable Home Key Move the toggle wheel up and down to move between the screens. Press the toggle wheel in to return to the first page of the current page collection. Note: The On/Off Switch must be moved completely into the up or down position to turn NevoQ50 on or off. Caring for NevoQ50 Use only the stylus to switch NevoQ50 on or off. Avoid using sharp objects. Clean your remote with a soft, damp cloth using a gentle, non-caustic cleaner. CAUTION:Do not use a caustic or abrasive cleaner. This may damage the surface of your controller. For more information, contact your installer/integrator:

Installer/integrator: attach your business card or business sticker here. NOTICE: Nevo, NevoStudio, NevoQ50, NevoStudio Pro and NevoConnect are registered trademarks or trademarks of Universal Electronics Inc., in the United States and/or other countries. Other product and company names may be trademarks of their respective companies. FCC NOTICE: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide a reason-

able protection against harmful interference in a residential installation. This equipment gener-

ates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be deter-

mined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet or a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help Operation is subject to the following two conditions: (1) this product may not cause harmful inter-

ference, and (2) this product must accept any interference received, including interference that may cause undesired operation. This equipment has been verified to comply with the limits for a class B computing device, pursu-

ant to FCC Rules. In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in interference to radio and TV reception. The user is cautioned that changes and modifi-

cations made to the equipment without the approval of the manufacturer could void the users authority to operate this equipment. FCC ID: MG362400 IC ID: 2575A-URC6240 Copyright 2007 Universal Electronics Inc All rights reserved. Document version NQ50QGP101007 Corporate Headquarters Universal Electronics 6101 Gateway Drive Cypress, CA 90630-4841 www.uei.com International Headquarters Universal Electronics Institutenweg 21 7521 PH Enschede The Netherlands www.uei.com