80-1553-00 SIP Wireless Conference Phone User Manual

 

2019 Snom Technology GmbH. All Rights Reserved. Snom, the names of Snom products, and Snom logos are trademarks owned by Snom Technology GmbH.

without being obliged to announce such revisions or

the data upon which it is based may have changed in the

liability for the accurateness, completeness, and current-

where liability arises due to binding legal provisions.

how to set up and use the device before using it and also give them to other users to read or inform those users of their contents. Save this manual and do not give the

: The product included (ITE) in this manual is s

to the outside plant.

-

-

er's authority to operate the erate the pliance could void the user's authority to operate the equipment.

--

-

his product should only be connected to the host product should only be connected to the host This product should only be connected to the host equipment and never directly to the network such as equipment and never directly to the network such as equipment and never directly to the network such as Public Switch Telephone Network (PSTN) or Plain Old Public Switch Telephone Network (PSTN) or Plain Old Public Switch Telephone Network (PSTN) or Plain Old Telephone Services (POTS). Telephone Services (POT Telephone Services (POTS). If the phone is not supplied with power via the Ether is not supplied with power via the Ether--

If the phone is not supplied with power via the Ether-

net cable, use only the power adapter included in the only the power adapter included in the net cable, use only the power adapter included in the power supplies may damage or destroy delivery. Other power supplies may damage or destroy delivery. Other power supplies may damage or destroy

he cables where people may trip over Avoid placing the cables where people may trip over Avoid placing the cables where people may trip over

pressure as this may damage them. pressure as this may damage them.

as this may da This device is for indoor use only! NOT FOR OUTDOOR is device is for indoor use only! NOT FOR OUTDOOR This device is for indoor use only! NOT FOR OUTDOOR Do not install the device in rooms with high humidity Do not install the device in rooms with high humidity USE!USE!

USE!

Do not install the device in rooms with

basements). Do not immerse the device in water and basements). Do not immerse the device in water basements). Do not immerse the device in water and do not spill or pour liquids of any kind onto or into the any kind onto or into the do not spill or pour liquids of any kind onto or into the device. device. Do not install the device in surroundings at risk t risk Do not install the device in surroundings at risk for

Do not use the device du Do not use the device during thunderstorms. Lightning

fumes. fum fumes. Do no striking the power g striking striking the power grid may cause electric shocks.

-

ququ quately shielded medical devices. Consult the manu-

facturer of the medical device to determine if they are

this topic. If you have an implanted medical device (e.g., pace-

radio frequency signals. Recommended MINIMUM distance to the device: 100 cm (39''). Always follow the

R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R A A A 1. 1. 2. 3. 4. 5. 2. 3.

1. 2. Plug one end of the Ethernet cable into the Ethernet

end of the cable into your network router or switch.

capable network router or switch:

Connect the provided Snom power adapter to the

Plug the power adapter into an electrical outlet that is not controlled by a wall switch.

IMPORTANT INFORMATION Use only the power adapter provided with the product. To order a replacement power adapter, visit our website at www.snomamericas.com. riented The power adapter is intended to be correctly oriented

t is plugged into a designed to hold the plug in place if it is plugged into a net outlet. ceiling, under-the-table, or cabinet outlet.

1.

compartment.

2.

3. 3. Connect power to the conference phone Connect power to the conference phone 1. 1. ntrolled by a switc

g the large end of the AC adapter into a wall outlet Plug the large end of the AC adapter into a wall outlet not controlled by a switch. ear connectors of the conference phone Place the rear connectors of the conference phone harging dock. into the charging dock.

designed for use only with the C620 con designed for use only with the C620 conference phone. It is not designed to power other de phone. It is not designed to power other devices.

ices. power adapter to any other devices.

plug in place if it is plugged into a ceiling, under-

the-table, or cabinet outlet.

F F

(MENU). On the conference phone, press Select Select Select

screen. Press to move through the screens. a. Connect the conference phone with AC power. b. 4 seconds. 6. c. Press the # key on the conference phone. If prompted, enter the PIN. Default PIN is 1590. The conference phone displays a message with the re-

1. 2. 3. 4. 5. 6.

(MENU). Press Select Select Select Select YES Enter the PIN. Default PIN is 1590.

displays the message <DEVICE_NAME> is deregiste-

T TTTTTTTTTTTTTTTTTT T nference pho

This telephone is set up to comply with the energy-conser-

mode.

emove the conference phone from the Remove the conference phone from the charging dock. 1. Remove the conference phone from the charging dock. 2.

2.

on the conference phone. Press and hold on the conference phone. 3.3. Press and hold 3. 4.4. With the With the

4. or 5 seconds. conference phone, and then wait for 5 seconds. conference phone, and then wait for 5 seconds. 5. When the conference phone status indicators start dicators star When the conference phone status indicators start 5.

, and then press ress

, and then press immediately. immediately. The conference phone displays the message: e:

The conference phone displays the message:

"To use the phone again, please reset the power." wer."

"To use the phone again, please reset the power."

6. Put the conference phone on the charging dock to t the conference phone on the charging dock to 6. Put the conference phone on the charging dock to

indicates the charge status as s as indicates the charge status as s an

1. Remove the conference phone from the charging dock. 1. Remove the conference phone from the charging dock. 2.

2. 3.

3. pressing any keys. pressing any keys.

1. 1.

(with the label

(with the lab compa compartment.

2.2 2. 3.

mics

Steady Green during a call. Steady Red when a call is muted, or if there are new messages. Flashes Green quickly when there is an incoming call. Steady Orange while charging.

when charging completed and you connect the conference phone to the charging dock.

Flashes Orange slowly

in use. Flashes Red and Green alternately

Flashes Green slowly Flashes Red slowly when out of range or not registered. Steady Orange Flashes Red Power Up On a call Incoming Call Charging

Stand by

Paged by

DECT Searching Mode Reset mode

charging

The status indicator on the wireless mic

wireless mic is fully charged.

Power up Power down

Firmware Upgrade Power LED is Steady Green.

quickly while ready to deregister devices. Power and VoIP LEDs are Steady

elapsed.

SIP account is deregistered. Power and VoIP LEDs alternately

-

sioning server.

VoIP LED is Steady Green when no SIP account is unregistered. Power and VoIP LEDs alternately

progress.

1. 2. 3. 4. 5.

(MENU). Press Select Select Select

screen. Press to move through the screens. a. Connect the conference phone with AC power. b. Put one wireless mic on the conference phone charge cradle c. Press and 4 seconds. d. Press and hold the MUTE key on the wireless mic for 3 seconds. If

the mic LED lights up in red for 5 seconds.

(MENU). To register the second wireless mic, repeat step 3 to 5. 6.

1. 2. 3. 4. Press Select Select Select Wireless microphone 1 or Wireless microphone

Enter the PIN. Default PIN is 1590.

displays the message <DEVICE_NAME> is deregiste-

5.

C620 SIP Wireless Conference Phone A

Wireless Mic

ErisStation Charging Dock AC power adapter for Charging Dock Conference Phone battery Conference Phone Quick

Guide C620 Ethernet cable

power adapter for

SIP

B C

ErisStation D D D D D DDDDD D D D D D D D D D D D D D D D DDDDDDDDDDDD D D D D D D D DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD DDD DDDDDDDDDDDDDDDD

SIP SIP Power LED Power LE Power LED VoIP LED VoIP LE VoIP LED

9590 SW Gemini Dr.

www.snomamericas.com v2019001 T F

FCC part 15 This device complies with Part 15 of the FCC rules.

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, in-

This equipment has been tested and found to comply

15 of the FCC rules. These limits are designed to provide

-

can radiate radio frequency energy and, if not installed

there is no guarantee that interference will not occur in a

-

are encouraged to try to correct the interference by one of the following measures:

1. Reorient or relocate the receiving television or radio antenna.

-

ment and the receiver. Connect the telephone equipment into an outlet on a

or other receiver is connected.

-

nician for help. 2. 3. 4.

using this phone.

compliance could void the users authority to operate the equipment.

from nearby persons.

supplied or designated for this product. Use of other accessories may not ensure compliance with FCC RF

interference, and interference, an

(1) this device may not cause harmful interference, and nce received, nce received

(2) this device must accept any interference received,

of the device.

using this telephone.

Connector

cleaning liquids as they might damage the surface or inter-

nal electronics of the device.

Power adapter (included in

Charging dock power adapter: (CS36M120300FUF)

3000mA

between conference phone or wirel-

between microphones: 30 cm (1')

The detachable wireless microphones of this product use

is available at www.snomamericas.com. Do not use any

them for purposes other than the intended one. Charge

placed in the chargers on the product.

cycles.

or other heat sources. or other heat sources.

ge of +5 C to +40 C (+41 F ambient temperature range of +5 C to +40 C (+41 F

Avoid overcharging. Repeated overcharging can lead to

and lead to leakages. ercharging

month.

-

ve gases. Temperature range for storage ve gases. Temperature range for storage of charged

3 months. 3 months.

-

DD D A R R