PTU-01 Bluetooth Speaker User Manual

Bluetooth Speaker PTU-01 1. Brief introduction:

This system is a music player office chair with wireless Bluetooth connectivity function. 1. With Bluetooth music module, in order to connect smoothly within maximum 10 meters straight line. 2. Stereo 5W X 2 channel amplifier high-fidelity audio output.Support for dual channel 5WX2 subwoofer output 3. Support audio input and headphone function 2. Structure Description:

LED light LED light strip Subwoof er Control Box Adapter LED BOX high-pitched speaker The system consists of left and right channels of high quality speakers, a Bluetooth power amplifier board, a charger, LED Control box,LED light strip. 3. Instructions DC Port ON/OF F Power Indicator BT indicator Audio output Audio input STEP 1: Plug the adapter output into the DC PORTand plug the adapter into the home outlet. STEP 2: Turn the unit ON. When the green light flashes and you hear the prompt tone, the Bluetooth pairing mode is turned on. Turn on your phone's Bluetooth and find the following device name "gamingchair" and connect. (Note: It is only connectable to one devise at one time.) When the Bluetooth device is not connected, please restart the power. STEP 3: The AUX port can transmit audio to the speaker for playback. The aux port can be connected to the mobile phone. Just prepare an audio cable and plug the plug into the phone's earphone jack and the aux port to connect. The cushions can vibrate according to the audio, and when the sound stops, the vibration also stops. STEP 4: It can adjust the volume and the vibration intensity. It also can connect headphone. 4. The Main Parameters:

Operating current: 2A stand-by current : 10mA Temperature Range: -20oC to +70oC Wireless transmission range: 10 meters Sensitivity: -80dBm<+/-0.1%BER Frequency range: 2.4GHz-2.480GHz Audio Performance : Support AAC, MP3, SBC, Stereo Audio signal to noise ratio: 75dB Distortion: 0.1%

FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference.

(2)This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note:This equipment has been tested and found to comply with the limits for a class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequence energy and,if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.However,there is no guarantee that interference will not accor in a particular installation.if this equipmemt does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an autlet on a circuit different from that to which the receiver is connectec. Consult the dealer or an experienced radio/TV technician for help. This equipment should be installed and operated with a minumum distance of 20 cm between the radiator and your body. IC Statement This device contains Innovation, Science and Economic Development Canadas Operation is subject to the following two conditions:

1.This device may not cause interference. 2.This device must accept any interference, including interference that may cause undesired operation of the device. This equipment should be installed and operated with a minumum distance of 20 cm between the radiator and your body. licence-exempt transmitter(s)/receiver(s) that comply with licence-exempt RSS(s). Le prsent appareil est conforme aux CNR d'Industrie Canada applicables auxappareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1)l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter toutbrouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre lefonctionnement. CAN ICES-3(B)/NMB-3(B) Cet quipement doit tre install et utilis une distance minimale de 20 cm entre le radiateur et votre corps.