MDY10EP Mi Wireless Charger User Manual

FCC Regulations This Mi Wireless Charger complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including anterference that may cause undesired operation. This Mi Wireless Charger has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. FCC Note Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Important safety information Read all the safety information below before using your device. Use only authorized accessories which are compatible with your device. This devices operating temperature range is 0~35. Using this device in the environments outside of this temperature range may damage the device. After charging is complete, disconnect the adapter from both the device and the power outlet. Do not charge the device longer than 12 hours. Do not try to repair the device yourself. If any part of the device does not work properly, contact Mi customer support or bring your device to an authorized repair center. Connect other devices according to their instruction manuals. Do not connect incompatible devices to this device. For PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near the equipment and shall be easily accessible. Safety precautions Follow relevant laws and regulations. Do not use your device in the following environments. Do not use your device in a potentially explosive environments include fuelling areas, below decks on boats, fuel or chemical transfer or storage facilities, areas where the air contains chemicals or particles, such as grain, dust, or metal powders. Obey all posted signs to turn off wireless devices such as your device or other radio equipment. Do not use your device in the hospital operating rooms, emergency rooms, or intensive care units.Please consult your doctor and the device manufacturer to determine if operation of your device may interfere with the operation of your medical device.To avoid potential interference with the pacemaker.keep a minimum separation of 15 cm be maintained between the device and the pacemaker . To achieve this use the device on the opposite ear to your pacemaker and do not carry it in a breast pocket.Do not use your device near hearing aids, cochlear implants, etc to avoid interference with medical equipment. Do not use your devices in places with high humidity such as bathrooms. Doing so may result in electric shock, injury, re, and charger damage. Observe any rules which restrict using wireless charger in specic cases and environments. Temperature: 0 C - 35 C Manufacturer : Xiaomi Communications Co., Ltd. Manufacturer postal address: The Rainbow City of China Resources, NO.68, Qinghe Middle Street, Haidian District, Being, China 100085 Brand: MI Model: MDY-10-EP FCC ID: 2AFZZ-MDY10EP All rights reserved by Xiaomi Inc. XXX-XXXX-XXXX-A Nj!Xjsfmftt!Dibshfs Rvjdl!tubsu!hvjef MFE!Joejdbups!Mjhiu Efwjdf!po;!Gmbtift!uisff!ujnft Tuboecz!npef;!Pgg Usbotgfssjoh!qpxfs;!Tpmje Qspufdujpo!npef;!Gmbtijoh Fssps;!Gmbtijoh

+

+

+

+

+

VTC!Uzqf.D!qpsu Using the Wireless Charger Connect a charger to the wireless charger, then place a mobile device which meets the QI wireless charging standard onto the wireless charger. After the mobile device is done charging, remove it from the wireless charger. May only be used with approved Mi chargers (QC 2.0, QC 3.0, and PD chargers) Never place items such as metal objects, magnets, or magnetic stripe cards between a mobile device and the wireless charger, as this could prevent the device from charging properly or cause damage from overheating. Charger should be securely plugged into an electrical outlet when charging. A mobile device may not charge properly depending on where its wireless charging coil is located. Wireless charging may not work properly if a mobile device is enclosed in a thick protective case. If a mobile device has a thick protective case, remove it before placing the device onto the wireless charger. If a mobile device is placed onto the wireless charger while connected to earphones, it may prevent the device from charging. Fast wireless charging To begin fast wireless charging, place a Mi phone which supports fast wireless charging onto the wireless charger. For more details, please refer to the User Manual. Note: Only approved Mi chargers that support fast charging (27W QC 3.0 chargers and 18W QC 3.0 chargers) may be used. This product is QI certied by the Wireless Power Consortium (WPC), which means it is able to charge other WPC certied products. However, please note that variations in certain products may cause them to have reduced charging efciency compared to Mi brand products. Correct disposal Correctly dispose of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle responsibly to promote the sustainable reuse of material resources. To safely recycle your device, please use return and collection systems or contact the retailer where the device was originally purchased. For indoor use only To identify electrical equipment designed primarily for indoor use. Direct current To indicate on the rating plate that the equipment is suitable for direct current only;

to identify relevant terminals. EU Regulations RED Declaration of Conformity We, Xiaomi Communications Co., Ltd. Hereby, Xiaomi Communications Co., Ltd. declares that this Mi Wireless Charger with Qi MDY-10-EP is in compliance with the essential requirements and other relevant provisions of the RE Directive 2014/53/EU.The full text of the EU declaration of conformity could be consulted at www.mi.com/en/certication Frequency Bands and Power This Mi Wireless Charger offers the following frequency bands in EU areas only and maximum radio-frequency power Qi : 110~145Khz : 2.93dBuA/m at 10 m Distance 196.V12I.1165

!!

312:123:

B

!239h!

Qboupof!Dppm!Hsbz!9D

Bsjbm!!4qu