RM6117 Mobile Phone User Manual

Thank you for choosing Redmi 4A Long press the power button to turn on the device. Follow the instructions on the screen to configure your device. For more information Visit our official website: www.mi.com. MIUI Redmi 4A is pre-loaded with MIUI, our customised Android-based OS which pushes out frequent updates and user friendly features suggested by over 200 million active users globally. Visit www.miui.com for more information. SIM Card Tray:

Tray 1 supports Micro-SIM card;

Tray 2 supports Nano-SIM card / MicroSD card. Volume Button Power Button Micro-SIM Micro-SIM Nano-SIM Micro SD About Dual SIM:

When 2 SIM cards are in use, only one SIM will have 4G/3G/2G while the other SIM will be on 3G/2G. Important safety information Model: 2016117 SAR 10g limit2.0W/Kg, SAR ValueHead: 0.525W/Kg, Body: 1.181W/Kg (MAX, 5mm distance) Temperature: 040 Adapter shall be installed near the equipment and shall be easily accessible. Menu Button Back Button Home Button USB Port Redmi 4A 128g pantone cool gray 8c Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. To prevent possible hearing damage, do not listen at high volume levels for long periods. R&TTE Declaration of Conformity We, Xiaomi Communications Co., Ltd. The Rainbow City of China Resources, NO.68, Qinghe Middle Street, Haidian District, Beijing, China 100085 Hereby, Xiaomi Communications Co., Ltd. declares that this GSM/

GPRS/EDGE/UMTS/LTE Digital Mobile Phone with Bluetooth and WiFi 2016117 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity be consulted at www.mi.com/en/certication Body-worn SAR testing has been carried out at a separation distance of 5 mm(2016117). To meet RF exposure guidelines during body-worn operation, the device should be positioned at least this distance away from the body. If you are not using an approved accessory ensure that whatever product is used is free of any metal and that it positions the phone the indicated distance away from the body. Ensure that the power adapter used meets the requirements of Clause 2.5 in IEC60950-1/EN60950-1 and has been tested and approved according to national or local standards. RF Exposure Information (SAR) This device meets the governments requirements for exposure to radio waves.This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy.The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. The highest SAR value for the model device as reported to the FCC when tested for use at the ear is 0.54 W/kg and when worn on the body, as described in this user guide, is 0.82 W/kg (Body-

worn measurements differ among device models, depending upon available accessories and FCC requirements), and hotspot mode is 0.82 W/kg. For body worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and be positioned a minimum of 1.0cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. If you do not use a body-worn accessory and are not holding the device at the ear, position the handset a minimum of 1.0cm from your body when the device is switched on. FCC Regulations:

This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. FCC Note:

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Xiaomi Communications Co., Ltd. Model: 2016117 All rights reserved by Xiaomi Inc. 000000000000-A