CGO2-GB 1480491R-CGO2-GB-User Manual-2014-12-1

 

TABLE OF CONTENTS 1 . . 1 . . 2 . . 2 . 3 . . 5 . . 6 . . 9 . . 10 . . 10 . . 14 . . 16 . . 17 . . 17 . . 18 . . 19 . . System Requirementments (Windows) System Requirementments (Mac) Technical Specications Introduction Overview What is included in the CGO2-GB Mounting on QX1 Powering the CGO2-GB Basic Operation CGO2-GB APP Interfaces Trouble shooting guide Tansferring le CGO2GB SMARTPHONE FPV APP Safety warnings Warranty About the quickstart manual SYSTEM REQUIREMENTS (Windows) Windows XP (Service Pack 2 or later) or Vista 3.2GHz Pentium 4 or faster Minimum 4GB of system RAM SYSTEM REQUIREMENTS (Mac) Mac OS X 10.4.11 or later 2.0GHz Intel Core Duo or faster Minimum 4GB of systemt RAM 1 TECHNICAL SPECIFICATIONS Dimensions LxWxH:

Weight:

Working Voltage:

Wireless Frequency Range:

Lens Sensor:

Field of view:

Pitch Axis Control:

Eective Pixels:

White Balance:

Focusing System:

Storage Temperature:

Working Temperature:

74x100x128mm (with lens) 167g (without transfer board) 12V 5745MHz---5825MHZ 16M 155 0~80 16 million pixels Automatic white balance Fixed Focus

-20C- 60C 0C-50C INTRODUCTION CGO2-GB is a high-resolution gimbal camera specically developed by Yuneec for small UAVs. The compact and light-weight CGO2-GB is suitable for high quality rst person view (FPV) for an array of ying platforms. CGO2-GB includes long range and low-latency digital Wi-Fi video link, providing users with a high denition, portable real-time video solution. CGO2-GB can be remotely controlled by Yuneec FREE iOS and Android smart phone applications without the use of extra components. 2 OVERVIEW Illustration A:

LED indicator

-Red LED solid: Power On

-Green LED solid: Get Ready

-Green and Blue LEDs ash alternatively:

Video/Photo taking

-Yellow LED ashes: T card error

-Red LED ashes: Wi error Camera 5.8 Ghz Wi-Fi Antenna Illustration B:

Roll axis arm Weight balancing part Pitch axis arm Yaw axis 3 Illustration C:

NOTET Card Storage should be more than 4GB or CGO2GB will failed in recording. T card slot 5pin MICRO USB Illustration D:

CGO2-GB Control cable slot

(3 pin cable from QX1 ) PWM slot Camera power cable slot

(Cable from CGO2-GB) UART 4 Illustration E:

gyro cable slot SR12S cable slot CGO2-GB power cable slot

(2 pin cable from QX1 ) potentiometer cable slot Yaw motor control cable slot Roll motor control cable slot Pitch motor control cable slot 5 What is included in the CGO2-GB Illustration FThe entire CGO2-GB includes a camera, a gimbal and internal 5.8Ghz wi antenna. Gimbal Camera Internal 5.8Ghz Wi Antenna Mounting on QX1 Mounting CGO2-GB to QX1 Step.1 Mounting CGO2-GB transfer board to the QX1 with 3 socket head cap screws (ST2.5*10). Illustration G CGO2-GB transfer board 6 Illustration HTransfer board mounted to QX1 Step.2 Slide the CGO2-GB onto the transfer board as shown until it locks. Illustration I:

7 Powering the CGO2-GB After mounting CGO2-GB, plug in the CGO2-GB power cable to the CGO2-GB power cable slot (Illustration E) and the CGO2-GB control cable to the CGO2-GB control cable slot (Illustration D) . Note: The CGO2-GB does not contain any battery pack. It is directly powered from the QX1. Illustration J 6 pin Cable slot CGO2-GB power cable

(2 pin Cable from QX1 ) Control cable

(3 pin Cable from QX1 ) Basic Operation:

Illustration L: Powering on the QX1 8 Turn on the power button to ON To Power ON:

Turn on the power button on QX1 to ON, Red LED indicates CGO2GB has been successfully powed on, 30-40s later, when the Red LED turns into Green LED, it indicates that wi for CGO2GB is ready. To Power OFF:

Turn o the power button on QX1 to OFF. Access to WiFi:

When the Green LED is on, customers can use 5.8G device to search for CGO2GBs SSID. The initial password is:

1234567890. Video/Photo:

Press the VIDEO/PHOTO button on mobile App or remote controller. 9 CGO2-GB APP Interfaces Interface A:

SETTINGS RESETVF POWER SD CARD STORAGE ABOUT VIEW PHOTO/VIDEO TAKE PHOTO, START/STOP RECORDING START/STOP RECORDING TROUBLESHOOTING GUIDE WHAT WHY SOLUTION The CGO2-GB keeps vibrating after initializing. CGO2-GB may not be mounted securely to the transfer board. Make sure the CGO2-GB is slided onto the transfer board until it locks . Otherwise, the center of gravity will be incorrect. 10 The CGO2-GB does not function or respond. CGO2-GB may have been moved during initialization. Cycle the QX1 power on/o by switching on/o. CGO2-GB can not be powered on. CGO2-GB control harness may not be connected into the correct port. If using GB2 GB with QX1, be sure to connect the power cable from QX1 to the slot on CGO2-GB. CGO2-GB failed in turning back to the front CGO2-GB may not have positive connection via yaw axle cable. Check CGO2-GB yaw axle control cable, if necessary try reconnecting and cycling the power on/o. CGO2-GB does not respond to control inputs and LEDs

ashes in RED. The gyro board harness may have disconnected from the GB2 GB control board. Check the connection between the gyro board and the GB2 GB control board. TRANSFERRING FILES Follow the steps to transfer video and photo les to a computer:

11 Using an USB cable:

1. Turn o the power switch on QX1. 2. Connect CGO2-GB to the computer using the included USB cable. 3. Double click My Computer, locate and double click Removable Disk. 4. Double click DCIM folder icon to view all Photo and Video les. 5. Copy your precious les to the computer. Using Micro card:

1. Turn o the power switch on QX1. 2. Take the T card out of CGO2-GB and insert it in the T card slot of your computer. 3. Double click My Computer, locate and double click Removable Disk. 4. Double click DCIM folder icon to view all Photo and Video

les. 5. Copy your precious les to the computer. CGO2GB SMARTPHONE FPV APP 1. Download the Free CGO2-GB App to your smartphone or tablet at the Apple App Store or Google Play. 12 2. Power on CGO2-GB (turn on the ON/OFF button on QX1). 3. Open your devices Wi-Fi settings and connect to the CGO2-GB_****** network. 4. Enter the password key located on the CGO2-GB. 5. Open the CGO2-GB App on your smartphone or tablet. Now, you will be able to control the CGO2-GB with your smartphone or tablet, plus adjust settings. SAFETY WARNINGS This symbol means that according to the local laws and regulations your product should be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. Some collection points accept products for free. The separate collection and recycling of your product at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. Federal Communications Commission (FCC) Interference Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

13 interference

(1) This device may not cause harmful interference

(2) this device must accept any interference received, including that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced technician for help. interference radio or radio/TV to 14 Note: Any changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF exposure warning The equipment complies with FCC RF exposure limits set forth for an uncontrolled environ-

ment.The equipment must not be co-located or operating in conjunction with any other antenna or transmitter. IC Radiation Exposure Statement for Canada This device complies with Industry Canada licence-ex-

empt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference 2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Keep CGO2-GB out of the reach of any liquid. Age Recommendation: Not for children under 14 years. This not a toy. 15 installed and operated RF exposure warning This equipment must be in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. WARRANTY Limited Warranty:

Yuneec warrants that for a period of one (1) year from original date of purchase, the product will be free from defects in materials and workmanship under normal use. In the event of a defect, please contact Yuneec Customer Support

(www.Yuneec.com) for assistance. Yuneecs sole obligation under this warranty will be, at its option, to repair or replace the product. This warranty does not apply to products damaged by misuse, accident, water damage, or normal wear and tear. Yuneec disclaims all other expressed or implied warranties or conditions. To the extent not prohibit-

ed by law, in no event will Yuneec be liable for any loss of data, revenue or prot, or for any special, indirect, consequen-

tial, incidental or punitive damages, however caused, arising 16 16 out of or related to the use of or inability to use the product, even if Yuneec has been advised of the possibility of such damages. In no event will Yuneecs liability exceed the amount paid by you for the product. Some jurisdictions do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specic legal rights, and you may also have other rights, which vary by jurisdiction. ABOUT THE QUICK START MANUAL Yuneec reserves the right to update manuals, quick start guides and warranty information at any time. For the latest manual and quick start information, as well as warranty infor-

mation, please visit yuneec.com 17 Copyright 2014 Yuneec