SP-0003 Print BT Speaker 15 UserMan Users Manual

50mm BASS JAXX PRINT BLUETOOTH SPEAKER Instruction Manual Model:SP-0003 Table of contents 1 Introduction 2 Packaging Contents 3 Product Diagram 4 How To Use 4.1 General Function 4.2 Pairing To Mobile Phone 4.3 Charging Your Product 5 Product Specification 6 FAQ 7 FCC Statement 1 2 2 3 3 4 5 6 7 8 1. Introduction Congratulations, and thank you for choosing the Print Bluetooth Speaker. This manual will help you operate the Print Bluetooth Speaker, but you should first familiarize yourself with the Bluetooth functionality of your mobile phone or other devices before using the Print Bluetooth Speaker. 86mm 2. Packaging Contents 1X Print Bluetooth Speaker 4. How To Use 4.1 General Functions Desired Result Required Action Switch on &

Enter the pairing mode Switch the button to the left. 1X Micro USB Cable 1X Instruction Manual Bluetooth pairing You should use a Bluetooth function mobile phone or other Bluetooth Master Device and to perform pairing action. 3. Product Diagram Front Back Light Up Switch off Switch the button to the right. Charging Plug the Micro USB cable to the DC5V charging port of the device. On/Off Switch ON OFF DC 5V Micro USB Charging Port 4.3. Charging your speaker Use the Micro USB cable accessory provided with this speaker. Connect the Micro USB plug to the Micro USB charging port. Then connect the USB plug to a USB port on a computer or wall adapter to activate charging. 4.2 Pairing to Mobile phone or other device To use your Bluetooth speaker, you must first pair your speaker with a mobile phone or other Bluetooth device. Once your Bluetooth speaker is paired to a specific mobile phone, they will remain paired and automatically recognize each other whenever they are within range. Pairing to a phone and Entertainment:

Turn on your phone and ensure the Bluetooth function is activated. Turn on the speaker, go to the pairing mode. Search your Bluetooth decvices on your phone by following the phones instructions. Refer to your phones user manual for more information. After a few seconds the phone will list the Print BT Speaker as a discover decvice. Select it and follow your phones instructions to select this pairing. Your phone will confirm the pairing, and then press Yes/OK. Finally, select to connect with Print Bluetooth Speaker from your phone. 5. Product Specification 6. FAQ 7. FCC Statement Parameter Driver Diameter Impedance Bluetooth Version Battery Capacity Playing Time Bluetooth Range Value 40mm 4 Ohms 3.0 300mAh Lithium Battery 1-2 Hours 32.8 Feet 1. Why is there no power even when the Bluetooth Speaker is turned on?

Ans: Ensure the battery has been charged up to 6 hours for initial use. 2. There is no sound during playback. Ans: Check the connection between the Bluetooth Speaker and the phone or computer, if the connection is not established, please connect again. Make sure the Bluetooth Speaker is paired with your Bluetooth enabled device. Distributed by Five Below Merchandising, Inc. 1818 Market Street, Suite 2000 Philadelphia, PA 19103 Made in China Visit Us At:

www.fivebelow.com This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC Radiation Exposure Statement This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.