VF50012BT Bluetooth Headphones Users Manual

50mm Introduction Thank you for purchasing your Vivitar Bluetooth Headphones, item VF50012BT. You can use your headphones with iPads, iPhones, iPods and many other types of smartphones and Bluetooth devices to stream music and enjoy hands-free calling. To get the best results, please read this manual first before using your device. Package Contents A Quick Look at Your Device MULTI FUNCTION Button Microphone BLUETOOTH HEADPHONES Instruction Manual Micro USB Charging Cable Instruction Manual with Warranty Info. VF50012BT Bluetooth Headphones Specifications Bluetooth Version: 4.2 Transmission Frequency Range: 20Hz-20KHz Bluetooth Range: Up to 32.8 feet (10 meters) Bluetooth Playing Time: Approximately 4 Hours Standby Time: Approximately 6 Hours Charge Time: Approximately 2 Hours Battery Type: 300mAh 3.7V Lithium-Ion Battery Driver Diameter: 40mm Micro USB Charging Port LED Indicator Light Previous Track / Volume Down Next Track / Volume Up Charging Your Headphones Your headphones have a built-in, rechargeable lithium-ion battery. To avoid damage, do not attempt to remove the battery. The full performance of the battery is only achieved after a few charging-discharging cycles. Charge the battery fully before first use. To do so, follow the steps below:

1. Connect one end of the included Micro USB charging cable to the Micro USB charging port on your headphones. Then plug the other end of the Micro USB charging cable into a USB port on your computer or a suitable power adapter to recharge the internal rechargeable battery. NOTE: The internal battery of your headphones takes approximately 2 hours to charge when completely drained. To maximize performance, it is recommended to charge the battery for six hours before initial use. 2. When the battery is charging, the LED indicator light will turn red. The LED indicator light will turn blue when the battery is fully charged. Unplug when charging is complete. NOTE: Overcharging could reduce the life of the battery. A charged battery will lose its capacity if it is not used on a regular basis. Important To avoid a complete discharge of the battery, charge your headphones at least once every six months. Pairing Your Headphones Your headphones can be paired with most Bluetooth devices including iPads, iPhones, iPod Touch, and most smartphones, laptops and tablets. To pair your headphones with a phone, follow the steps below:

1. Press and hold Multi-function button until your headphones power on. Once your headphones are powered on, the LED indicator light will alternately flash blue and red, blinking rapidly. This indicates that your headphones are in pairing mode. Using Your Headphones Listening to Music MULTI FUNCTION Button: Press to play or pause a track Quickly press the next track/volume up button to increase the volume. Quickly press the previous track/volume down button to decrease the volume. Press and hold the next track/volume up button to advance to the next song in a playlist. Press and hold the the previous track/volume down button to go back to the previous song in a playlist. 2. Go to the Bluetooth Manager of your Bluetooth device. 3. Search Bluetooth devices and select Viv headphone to start connecting. 4. Enter 0000 if your device asks for the PIN code. 5. Once paired, the LED indicator light will stop blinking and steadily shine blue. Note that anytime music is playing, the LED indicator light will slowly blink blue every few seconds. The LED indicator light will slowly blink blue every few seconds during music play. Note: You can also adjust volume and playback settings on your phone or connected audio device. Using the Phone Function Answering a Call: Quickly press the MULTI FUNCTION button to answer an incoming call. Ending a Call: Quickly press the MULTI FUNCTION button to end a call. Redial: Double tap the MULTI FUNCTION button to redial a call. Reject Call: Press and hold the MULTI FUNCTION button to reject the call. Note: The phone function can only be used when there is a Bluetooth connection between your headphones and phone. Important Safety Precautions When using your Vivitar Bluetooth Headphones basic safety precautions should always be followed, including the following:

1. READ ALL INSTRUCTIONS BEFORE USING YOUR HEADPHONES. 2. Do not use your headphones near water. Clean using a soft cloth or paper towel. 3. Do not place your headphones on any wet surfaces. 4. Do not allow children or the infirm to play with your headphones without adult supervision. 5. Do not expose your headphones to excessive heat, flames or fire. 6. Always press all buttons carefully. Do not manhandle your headphones. 7. Do not use in extremely dry environments, as this can lead to static discharge during usage. 8. Do not expose your headphones to temperatures above 40C. Keep out of direct sunlight. 9. Do not attempt to repair this product yourself. Contact a qualified service center if your headphones is in need of service. 10.Do not drop, puncture or expose your headphones to excessive trauma. 11. Your headphones are not intended for commercial use. 12. Do not place near objects that generate a strong magnetic field. 13. Use only the supplied chargers and cables. Unplug this device when not in use for long periods of time or during lightning storms. FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. FCC ID# 2ADM5-VF50012BT Vivitar One Year Warranty This warranty covers the original consumer purchaser only and is not transferable. This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year. What Is Not Covered by Warranty Damages or malfunctions not resulting from defects in material or workmanship and damages or malfunctions from other than normal use, including but limited to, repair by unauthorized parties, tampering, modification or accident. To Obtain Warranty Service and Troubleshooting Information:

Call 1-800-592-9541 in the U.S. or 0-800-917-4831 in the UK or visit our website at www.vivitar.com. To receive Warranty service along with the name and address of an authorized product service center, the original consumer purchaser must contact us for problem determination and service procedures. Proof of purchase in the form of a bill of sale or receipted invoice, evidencing that the product is within the applicable Warranty period(s), MUST be presented in order to obtain the requested service. It is your responsibility to properly package and send any defective products along with a dated copy of proof of purchase, a written explanation of the problem, and a valid return address to the authorized service center at your expense. Do not include any other items or accessories with the defective product. Any products received by the authorized service center that are not covered by warranty will be returned unrepaired. Vivitar One Year Warranty (cont.) NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE EXPRESSLY DESCRIBED ABOVE SHALL APPLY. DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERIOD STATED ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON DISTRIBUTOR. REPAIR, REPLACEMENT, OR REFUND OF THE ORIGINAL PURCHASE PRICE - AT DISTRIBUTORS SOLE DISCRETION -ARE THE EXCLUSIVE REMEDIES OF THE CONSUMER. IN NO EVENT WILL DISTRIBUTOR, ITS MANUFACTURERS, OR SAKAR INT. BE LIABLE FOR ANY INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES (SUCH AS, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR RECORDS) CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE PRODUCT. EXCEPT AS STATED HEREIN, NO OTHER WARRANTIES SHALL APPLY. NOTWITHSTANDING THE FOREGOING, CONSUMERS RECOVERY AGAINST DISTRIBUTOR SHALL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT SOLD BY DISTRIBUTOR. THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL CONSUMER WHO PURCHASED THE PRODUCT AND IS NOT TRANSFERABLE. This product is manufactured, distributed and sold by SAKAR International, Inc. All other trademarks are the property of the respective owner, who has not sponsored, endorsed or approved this product. m m 6 8 ITEM #: VF50012BT Maintenance and Care

-Before using your headphones, inspect the ports and jacks to make sure that they are clear of dust and debris.

-Use a soft cloth to clean your headphones. Never use any harsh chemicals or detergents. Make sure your headphones are dry before using.

-When your headphones are not in use, it should be stored in a cool, dry place.

-Never tug or yank on the USB cable while they are connected to your headphones. Connect and disconnect these cables as carefully as possible.

-Never expose your headphones to high temperatures, extreme cold, high humidity or excessive moisture or water.

-Please recycle or dispose of your headphones properly based on the laws and rules of your municipality. Contact local recycling facilities and/or the manufacturer of your earbuds for further information.