BWA17WI015 Blackweb Wireless Charging Stand User Manual

Thanks for choosing us This is a smart phone wireless charger that allows you enjoy the fun of digital products easily. Please kindly read the user manual before using and keep it for future reference. TM Wireless Charging Stand Model: BWA17WI015 PRODUCT GUIDE V1.0 Built-in 2 coils to make sure larger high-eciency charging position. LED light clearly show the standby and charging condition. Connect to Power Adapter Power Adapter Connect to Desktop for Charging 1.Connect the power adapter to socket. 2.Connect adapter to the USB2.0 interface, the other Micro USB to pad. USB Cable Micro USB Port Note: Charging pad controled by smart chips, long-term tandby can be assured. Connect to Laptop for Charging LED Indicator Light 1. Connect the USB 2.0 interface into desktop motherboard USB port, the other Micro USB to pad. 2.Standby LED light turn on blue. Charging Mode LED Indicator Light 1.Connect the USB 2.0 interface into lap top USB port, the other Micro USB to pad. 2.Standby LED light turn on blue. 1. Make sure the charging pad indicator light turn on green, under standby status 2. Put wireless charging mobile phone on the pad, the LED light will turn to green from blue and start charging. lt shows that the charging position is improper when the LED light ashing. Please move the phone a little and LED light keeps green. Specication Input: DC5.0V,2.0A/DC9.0V,1.8A Output: DC5.0V,1.0A/DC9.0V,1.1A Frenquency: 110-205KHz Conversion: 72%

Size: 118x70x87.5mm NW: 150g Trouble shooting 1.Wireless charging terminal bad 2.Power cable current less than 1.5A 3.Adapter current less than 1A 4.Adapter, power cable, product poor contact 5.Mobile location shift Notes:

1. Do not squeeze or collisions. 2. Do not disassemble or throw into re or water, to avoid causing a shot circuit leakage. 3. Do not use wireless charger in severely hot, humid or corrosive environments to avoid circuit damage and occursleakage phenomenon. 4. Do not place too close with magnetic stripe or chip card(ID card, bank cards etc.)to avoid magnetic failure. 5. Please keep the distance at least 20cm betweem implantable medical devices(pacemakers, implantable cochlear, etc.)and the wireless charger, to avoid potential interference with the medical device 6. To take care of the children, to ensure that they wont play the wireless charger as a toy, to avoid unnecessary accidents. 7. When work radios and products close contact, will produce interference, when product interference, please increase the distance between the product and radio. 8. When dont use the product, pease turn o the power supply and unplug the power plug. CAUTION To reduce the likelihood of excessive heat and possible damage, use only the USB cable packaged with this product. 9. Before clean this product. please cut o the power supply. please only used dry rag to clean the product. 10.If the damage caused by improper use of the body, the odd smell, smoke andother phenomena, please stop using immediately. Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equopment. The involved images are sketch maps, the nal product as per the material subjects. Includes:

Wireless Charger x1pc Micro USB cable x1pc Users Manual x1pc No power adapter, if you need, please purchase separately. Compatible devices:

SAMSUNG Note5/S6/S6 Edge/S6 Edge+/S7/S7 Edge/S7 Edge+/S6 NOTE/S6 DUOS LG D1/LG LTE2/OPtimus F5/G2(USA)/G3(four contacts after the shell)/G PRO OPtimus Vu3/LTE2 NOKIA Lumia 820/Lumia 1020/Lumia 1520/Lumia 920/Lumia 822/Lumia 930 Lumia 929/Lumia 928 HTC 8x/HTC Buttery(USA)/lncredible4G LTE/Droid DNA/Rzound/One mini2 One M8 Eye(M8Et/TD-LTE 4G)/One E9(E9t/TD-LTE 4G)/HTC Buttery3(TD-LTE 4G) ASUS Z97-DELUXE/PADPHONES-X Google Nexus2/Nexus3/Nexus4/Nexus5/Nexus6/Nexus7 MOTO Motorola 260/Droid Turbo 2 (XT1585)/XPRO/MAXX(XT1254) Nexus 6(XT1100/XT1103)/Droid Turbo (XT1254)/Droid MAXX2 (XT1080) SONY Z3V/Z4V BLACKBERRY PRIV(STV100-1)/PRIV(STV100-2)/Z30 SHARP SH-07D/SH-04D/SH-02D/SH-13C Federal Communication Commission Interference Statement

- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

- Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.

- NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Wal-Mart Stores,Inc., Bentonville, AR 72716 Hotline: 1-800-925-6278