2011A0 Remote Key Finder The Sharper Image User Manual

PORTABLE ELECTRONIC KEY aN Data 2011 Sharper Image Acquisition, LLC. All rights reserved. THE SHARPER IMAGE name and logo are registered trademarks of Sharper Image Acquisition, LLC used under license by MerchSource, LLC. All other logos and trademarks are proprietary to their respective owners. The artwork and design of this package are protected by US copyright law and may not be re produced, distributed, published or used for any purpose without prior written permission. Altering, removing or reproducing any of the trademark or copyright notices on this package is not permitted. 2011 MerchSource, LLC. All rights reserved. Distributed by MerchSource, LLC, Foothill Ranch, CA 92610. PATENT PENDING For customer support, please visit www.mscustomercare.com or call 1-800-374-2744 INSTRUCTIONS IMPORTANT: KEEP THIS INSTRUCTION MANUAL FOR REFERENCE AS IT CONTAINS IMPORTANT Printed in China. SAFETY INFORMATION. EVE INSTALLING BATTERIES (continued) INTRODUCTION FOBS Figure A Each requires one CR2032 button cell battery (included). NOTE: The two CR2032 button cell batteries are included, The Portable Electronic Key Finder is a device that makes finding keys simple. The everyday hassle of finding lost keys is eliminated with the touch of a button. You can count on an alarm to direct you to your keys. Whether your but need to be installed prior to your first use. Follow these

: : eps for first time installation or if the batteries need to be Feb Front keys are lying close by or up to 45 feet away, the Portable Electronic Key re None ee ee ene ATEN Cover

. lepiaced. Finder's wireless transmitter will locate your keys while being carried in-hand ; ;

. 1. Grasp the back cover and screw off counterdockwise. See Figure A. |

with ease. This package includes a remote transmitter, two key ring fobs, rogues 2. Insert a new battery into the metal slot, ensuring the + side and a tabletop cradle for storage. of the battery is facing up. The FOB will make its characteristic ) beeping sound as it is inserted into the slot. (

3. Replace the back cover by screwing it clockwise back onto the FOB. See Figure B, NOTE: Be sure that the "OPEN" markings are facing the bottom as you screw on the cover. Thiswill ensure that the pieces are property aligned OPERATION 1. Attach the number-coded FOB to key rings or other appropriate devices to be located. 2. Press and hold the corresponding number-coded button on the Remote Transmitter to at least one second, in order to locate the desired FOB. 3. Ifthe FOBis in range (45 feet), it will emit an audible beep. 4. Ifno beepis heard, change your location and press and hold the button again for another second. Note: The Remote Transmitter is portable, so it can be removed from Tabletop Cradle and carried with you to find devices attached to a FOB. PARTS SAFETY INFORMATION AND WARNINGS All of the safety and operating instructions should be read, understood and followed before the unit is operated. 1. Remote Transmitter 2. Transmitter Cradle 3. Key Fobs (2) Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in aresidential installation, This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that inter ference will not, occur in a particular installation. If this equiprnent does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

+ Reotient or relocate the receiving antenna Increase the separation between the equipment and receiver, Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

+ Consult the dealer or an experienced radio TV technician for help. ete This is not achilderts preduct. This device complies with Part 15 ofthe FCC Rules, Operation is subject tothe following two coreltions: (1) thisdevice may net cau se harmful interference, and Srl pats, especialy the buttoncell batteries, osea choking hazard to young chen,

(2)this device mustaccept ary interference received, including interference that + Ifthe productappearscrackedor broken in any anner,dicontinue use ard discard inveredistey. may cause undesired operation, BATTERY WARNING:

+ Do not mix oldand new batteries

+ Do not mixalkaline, standard (carborzind) or rechargeable {nicel-cadrnium batteries

+ Insert batteries using the corect pobty. Do not short-drcuit the supply terminal

+ Remove batteries when notin use, Regcleor dispose of echausted batteries according to federal state, and local laws, Do not dispose of hatteries in afre- they may leak or explode,

+ Only use ranufacturer specified batteryies), charger(s}andior adapter, if applicable, spedhed by the manufadurer

+ Always use, replace, and recharge if applicable) batteries underadult supervision, KEEP THIS INSTRUCTION MANUAL FOR REFERENCE AS IT CONTAINS IMPORTANT INFORMATION. INSTALLING BATTERIES CONTENTS Safety Information and Warnings. Parts... Battery Installation Operation .. REMOTE TRANSMITTER Requires 2 AAA batteries (not induded), 1. Grasp the back cover of the transmitter and firmly slide it down to access the battery compartment inside. 2. Insert 2AAA 1.5Y batteries into the transmitter, aligning the polarity (+/-) of the batteries to match the labels provided inside the battery compartment. 3. Reattach the back cover of the transmitter. Start by positioning the cover on the device with the top edge aligned at the level of the top-most screws, and then firmly push the entire cover up.