SB2021NG6 VIZIO 20-Inch 2.1 Channel Sound Bar with Bluetooth UM Users Manual

 

USER MANUAL Model: SB2021n-G6 VIZIO 20" 2.1 Channel Sound Bar with Bluetooth Please read this guide before using the product. IMPORTANT SAFETY INSTRUCTIONS Your Unit is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent your Unit from being damaged, the following rules should be observed for its installation, use, and maintenance. Please read the following safety instructions before operating your Unit. Keep these instructions in a safe place for future reference. Read these instructions. Keep these instructions. Heed all warnings. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two Follow all instructions. blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. To reduce the risk of electric shock or component damage, switch off the power before connecting other components to your Unit. Unplug the power cord before cleaning your Unit. A damp cloth is sufficient for cleaning. Do not use a liquid or a spray cleaner on your Unit. Do not use abrasive cleaners. Always use the accessories recommended by the manufacturer to insure compatibility. When moving your Unit from an area of low temperature to an area of high temperature, condensation may form in the housing. Wait before turning on your Unit to avoid causing fire, electric shock, or component damage. Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of your Unit and to protect it from overheating, be sure these openings are not blocked or covered. Do not place your Unit in a bookcase or cabinet unless proper ventilation is provided. Never push any object into the slots and openings on your Unit enclosure. Do not place any objects on the top of your Unit. Doing so could short circuit parts causing a fire or electric shock. Never spill liquids on your Unit. WARNING: Exposure to loud sounds can damage your hearing causing hearing loss and tinnitus (ringing or buzzing in the ears). With continued exposure to loud noises, ears may become accustomed to the sound level, which may result in permanent damage to hearing without any noticeable discomfort. When connected to a power outlet, power is always flowing into your Unit. To totally disconnect power, unplug the power cord. Do not overload power strips and extension cords. Overloading can result in fire or electric shock. English - ii The wall socket should be located near your Unit and be easily accessible Keep your Unit away from moisture. Do not expose your Unit to rain or moisture. If water penetrates into your Unit, unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock. Do not use your Unit if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair your unit yourself. Avoid using dropped or damaged appliances. If your Unit is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of your Unit may cause fire or electric shock. Do not install your Unit in an area with heavy dust or high humidity. Operating your Unit in environments with heavy dust or high humidity may cause fire or electric shock. When unplugging your Unit, hold the power plug, not the cord. Pulling on the power cord may damage the wires inside the cord and cause fire or electric shock. When your Unit Ensure that the power cord and any other cables are unplugged before moving your Unit. will not be used for an extended period of time, unplug the power cord. To reduce risk of electric shock, do not touch the connector with wet hands. Insert the remote control batteries in accordance with instructions. Incorrect polarity may cause the battery to leak which can damage the remote control or injure the operator. See the important note and rating located on the back of the unit. WARNING - This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filled with liquid near the equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain, or moisture. CAUTION - Danger of explosion or fire if batteries are mistreated. Replace only with the same or specified type. Do not leave the batteries exposed to direct sunlight for a long period of time with doors and windows closed. Do not disassemble the batteries or dispose of it in fire. Where the MAINS plug or appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable No naked flame sources,such as lighted candles,should be placed on the apparatus. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.;

The equipment shall be used at maximum 35 degree C ambient temperature. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of not isolated dangerous voltage within the product that may be sufficient magnitude to constitute a risk of shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing literature accompanying the appliance. instructions in the Warning: This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. English - iii TABLE OF CONTENTS Package Contents ............................................................................................................................ 5 Controls & Connections .................................................................................................................. 6 First-Time Setup............................................................................................................................... 8 Using the Remote .......................................................................................................................... 11 LED Indicators ................................................................................................................................ 13 Programming the Sound Bar ....................................................................................................... 15 Using Button Combinations ......................................................................................................... 16 Bluetooth Pairing ........................................................................................................................... 17 Using Bluetooth mode .................................................................................................................. 18 Advanced Setup ............................................................................................................................. 19 Help & Troubleshooting ................................................................................................................ 21 Limited Warranty ........................................................................................................................... 23 Specifications ................................................................................................................................. 25 Legal & Compliance ....................................................................................................................... 26 English - iv PACKAGE CONTENTS FOR TEXT CHANGES USE THIS: SQUARE 721 EX BT ROMAN SIZE 5 STROKE 0.12 PT WITH EXTRA KEARNING HOME THEATER DISPLAY | QUICK START GUIDE Installation Guide | Models:

HOME THEATER DISPLAY | QUICK START GUIDE Installation Guide | Models:

FPO Sound Bar Wireless Subwoofer Remote Control with 2x AAA Batteries 2 x Power Cables Stereo RCA to 3.5mm Audio Cable with Adapter Digital Optical Cable Coaxial Audio Cable User Manual English - 5 CONTROLS & CONNECTIONS Back of Sound Bar Power Port USB*

USB In OPTICAL Digital Optical Audio In Digital Coaxial In AUX Analog Audio In

(Stereo 3.5mm) English - 6

*Supports .WAV and .MP3 file format playback only. Top of Sound Barr Power Press to turn sound bar on or off. Input Press to change the audio source. Bluetooth Input Hold to pair.

(See Bluetooth Audio Pairing for more information.) Volume Increase or decrease the loudness of the audio. English - 7 Back of Subwoofer FPO LED indicator Power port Power button English - 8 FIRST-TIME SETUP Back of Sound Bar 1 CHOOSE ONE CABLE*

AND CONNECT IT TO YOUR TV

* Not all TVs have the audio outputs shown above. To connect the sound bar directly to your other devices (Blu-ray player, game system, etc.) see your devices user manual. When using the digital input, if there is no audio:

(A) try setting the TV output to PCM

-or-

(B) connect directly to your Blu-ray/other source; some TVs do not pass through digital audio. DIGITAL OPTICAL CABLE BETTER OR 3.5MM TO RCA CABLE GOOD OR DIGITAL COAXIAL CABLE BETTER Optional: Use the included RCA adapter to connect to your TV if needed. English - 9 2 Connect the power cable to the sound bar AC IN as shown. Plug the power cable into an electrical outlet. English - 10 3 Back of Subwoofer FPO Connect the power cable to the subwoofer AC IN as shown. Plug the power cable into an electrical outlet. Flip the power switch into the ON position. English - 11 4 Top 5 Top Remove the battery cover by gently sliding it away from the remote. Insert the included batteries and gently slide the battery cover back into place. When needed, VIZIO recommends replacing the batteries that came with this remote with two, new Duracell AAA alkaline batteries. FOR TEXT CHANGES USE THIS: SQUARE 721 EX BT ROMAN SIZE 5 STROKE 0.12 PT WITH EXTRA KEARNING 6 Turn on your TV and sound bar. The sound bar will automatically begin searching for an active input.*

Input The LED indicator on the front of the sound bar will begin cycling through inputs until an audio source is detected.**

Power Tip: Pressing the INPUT button will stop the auto detect function. You can press the INPUT button to switch between audio sources. For example, if you connected your TV to AUX , set the sound bar to AUX .

*Occurs only during first-time set up.

**Auto detect function only occurs once when the sound bar is first powered on. To enable this feature again, you must do a Factory Reset (see the Using Button Combinations section for more information) or press and hold the INPUT button for 3 seconds. English - 12 USING THE REMOTE Input*

Press to change the input source Power Press to turn on or off Volume +/-

Press to increase and decrease volume Previous Press to return to previous track TruVolume Turns TruVolume on and off. Virtual: X Turns Virtual: X on and off. Subwoofer Press the Previous/Next buttons to increase/decrease the level of the subwoofer. Bass Press the Previous/Next buttons to increase/decrease the bass level of the sound bar. Bluetooth Switches to Bluetooth mode. Long press puts sound bar in Bluetooth pairing mode. Play/Pause Press to play or pause. Long press will announce the current audio input. Next Press to skip to the next track. Mute Press to mute/unmute Movie EQ Press to turn Movie EQ mode on. Music EQ Press to turn Music EQ mode on. Treble Press the Previous/Next buttons to increase/decrease the level of the treble.

*Press INPUT then Previous to select previous input. Press INPUT then Next to select Bluetooth input. English - 13 For the best surround sound experience, position the sound as shown. The sound bar should be close to ear level (approx. 2-3 feet off the floor). FPO Sound bar is centered below the TV.

(If your TV permits it, you can also slide the sound bar underneath the TV.) English - 14 LED INDICATOR The LED and speakers will react differently for each function. LED Indicator is located here. Function LED/Speaker Behavior Description Input The LED will blink a different color for each input:

Red: Digital Green: AUX Amber: Optical Blue: Bluetooth Magenta: USB The LED will blink blue when searching and turn solid once a device is paired successfully. Bluetooth Pairing DTS TruVolume Press the INPUT button on the remote to cycle through the available inputs:

Analog Audio In - AUX Stereo 3.5mm Digital Coaxial Audio in - Digital Digital Optical Audio In - Optical Bluetooth USB In - USB Press and hold the INPUT button on the remote control for 3 seconds to enable the auto input detect function. Press and hold the button on the remote. The sound bar will announce that is it "searching." It will be discoverable for 15 minutes. You can now search for the sound bar (VIZIO SB2021) using your Bluetooth device. The sound bar will power down if no device is found. Note: Set your Bluetooth device into pairing mode prior to the sound bar. Press the TVOL button to enable/disable TruVolume. A high tone double beep indicates On, while a low tone double beep indicates Off. When enabled (On), TruVolume provides a consistent and comfortable volume level for a more enjoyable listening experience. Virtual:X A high tone double beep indicates On, while a low tone double beep indicates Off. Press the VRT:X button to enable/disable Virtual:X. When enabled (On), all inputs will produce a virtual sound technology that simulates the effect of having overhead sound. When disabled (Off), all sources will playback in stereo. English - 15 Function LED/Speaker Behavior Description Movie/Music Mode A high tone double beep indicates Movie mode, while a low tone double beep indicates Music mode. Press either the Movie or Music remote button to turn on each equalizer setting. Note: Movie mode is on by default. Subwoofer Levels High tone double beep: Max level Medium tone single beep: Mid level Low tone double beep: Minimum level Press the SUB button then press the Next/Previous button to increase/

decrease the subwoofer level. When set to the minimum level, the subwoofer will be muted. Note: Mid level is the default setting. Press the BASS button then press the Next/Previous button to increase/

decrease the bass level. High tone double beep: Max level Medium tone single beep: Mid level Low tone double beep: Minimum level Note: Mid level is the default setting. If a subwoofer is connected, adjusting the bass level will also adjust the subwoofer level. High tone double beep: Max level Medium tone single beep: Mid level Low tone double beep: Minimum level Press the TREBLE button then press the Next/Previous button to increase/

decrease the treble level. Note: Mid level is the default setting. Bass Levels Treble Levels English - 16 PROGRAMMING THE SOUND BAR You can program the sound bar to accept TV remote IR commands. Function LED Behavior Description Learn Volume Down The LED indicator will flash yellow when learning and will turn solid once it has successfully recognized the TV remote. Press the Play + Volume Down buttons on the remote to put the sound bar into learning mode. While the sound bar is in learning mode, press the Volume Down button on the TV remote control while pointing the remote at the sound bar. Learn Volume Up The LED indicator will flash amber when learning and will turn solid once it has successfully recognized the TV remote. Press the Play + Volume Up buttons on the remote to put the sound bar into learning mode. While the sound bar is in learning mode, press the Volume Up button on the TV remote control while pointing the remote at the sound bar. Learn Mute The LED indicator will flash white when learning and will turn solid once it has successfully recognized the TV remote. Press the Play + Mute buttons on the remote to put the sound bar into learning mode. While the sound bar is in learning mode, press the Mute button on the TV remote control while pointing the remote at the sound bar. Turn off your TV speakers when programming your sound bar. Point both the sound bar and TV remotes towards the front of the sound bar when programming. English - 17 USING BUTTON COMBINATIONS Buttons are located here. There are 3 functions that are triggered by 3 different button combinations on the sound bar. Function LED Behavior Description LED will flash 3 times. Reset the sound bar to the factory default settings. To perform a Factory Reset, Press and Hold the Bluetooth(

Volume Down () buttons for 5 seconds.

) and Note: This will erase all settings and preferences that you have set. A high tone double beep indicates On, while a low tone double beep indicates Off. Enable/disable the use of a VIZIO TV remote control to power on and adjust the volume of the sound bar. To enable/disable this function, Press and Hold the Power (

) and Volume Up ( + ) buttons for 5 seconds. Note: This function is enabled by default. A high tone double beep indicates On, while a low tone double beep indicates Off. When the Eco Power setting is enabled, the sound bar will automatically power down after a period of inactivity. When disabled, the sound bar will remain powered on until you turn it off. To enable/disable this function, Press and Hold the Power (

) and Volume Down () buttons for 5 seconds. Note: Eco Power Mode setting is enabled by default. Factory Reset VIZIO TV Remote Control Eco Power Mode English - 18 BLUETOOTH PAIRING To pair the sound bar with a Bluetooth device:

1. Press and hold the Bluetooth button on the sound bar for five (5) seconds or select the Bluetooth button on the remote. When the sound bar is in Bluetooth Pairing Mode, the LED Indicator on the front display panel will turn blue and start blinking. Once the device is paired, the LED Indicators will stop blinking. 2. You can now search for the sound bar (VIZIO SB2021) using your Bluetooth device. For more information, refer to the user documentation that came with the device. 3. Play audio from your Bluetooth device. Volume can be controlled on your source device and the sound bar. Top of Sound Bar X Bluetooth Device English - 19 USING BLUETOOTH MODE Your sound bar supports music streaming from smartphones, tablets, and computers with Bluetooth capability. Device compatibility will vary, see your devices documentation for more information. Once you have paired your source device to the sound bar, as long as you stay within range of the sound bar, your device should remain paired. If the input is changed, the Bluetooth device will disconnect. If the source is changed back to Bluetooth, any paired Bluetooth device will reconnect automatically. Your sound bar is not equipped with a microphone, so it cannot operate as a hands-free device for a smartphone. Maximizing Signal A Bluetooth signal has a range of up to 30 feet. Keep in mind that Bluetooth is a compressed audio format, so streamed music may lose some integrity when compared to a wired connection. Try the following if your sound quality is less than optimal:

If you hear any break-up or disconnect while streaming music from your device, move the source device closer to the sound bar. Be sure that there are no solid obstructions in the line-of-sight between the sound bar and the source device. Other wireless devices can affect Bluetooth range, including wireless security cameras, wireless video baby monitors, cordless phones, and microwave ovens. Turning off or moving these devices may improve Bluetooth range. Reduce the volume levels on your device and on the sound bar before pressing Play. High volume levels can damage your hearing. English - 20 ADVANCED SETUP Back of Sound Bar USB Thumb Drive*

DIGITAL OPTICAL CABLE 3.5MM TO RCA CABLE DIGITAL COAXIAL CABLE Optional: Use the included RCA adapter to connect if needed. Tablet/MP3 Player/Laptop Network Media Player Game Console

*Supports .WAV and.MP3 file format playback only. English - 21 Reconnecting the Subwoofer The subwoofer has already been paired with the sound bar by VIZIO. However, the subwoofer may need to be re-linked to the sound bar if there is no sound coming from the subwoofer. FPO What does pairing mean?

Pairing means to wirelessly connect. 1 FPO FPO 2 Buttons are located on top of the sound bar. Back of Subwoofer Power Button First confirm that the power switch is in the ON position. Press and hold the pairing button on the back of the subwoofer for 5 seconds. The LED on the back of the subwoofer will begin to blink. Press and hold the power button on the top of the sound bar for 5 seconds. The LED indicatoron the front will flash 3 times. The subwoofer is now linked with the sound bar. English - 22 Take a moment to register your product VIZIO.COM/PRODUCT-REGISTRATION Why register?

Customized Support Get assistance quickly with your information on hand. News and Offers Take advantage of the latest news and special offers from VIZIO. Safety and Satisfaction Stay up-to-date with important product updates and notifications. English - 23 Award-Winning Customer Care At Your Convenience. NEED HELP?

Go to: support.vizio.com Find help with:

New product setup Connecting your devices Technical problems Product updates and more Live chat support available You can also contact our support team at:

Phone: (877) 698-4946 Text Message: (205) 301-3729 Note: This number accepts SMS/MMS messages only. No voice calls are accepted. Message and data rates may apply. (U.S. only). Se habla Espaol Nous parlons Franais English - 24 HELP & TROUBLESHOOTING There is no power. There is no sound. I hear buzzing or humming. The remote isnt working. English - 25 Press the POWER button on the remote control or on the top of your sound bar. Ensure the power cord is securely connected. Plug a different device into the electrical outlet to verify that the outlet is working correctly. Increase the volume. Press Volume Up on the remote control or on the top of your sound bar. Press MUTE on the remote to ensure the sound bar is not muted. Press INPUT on the remote or on the top of your sound bar to select a different input source. When using the optical input, if there is no audio: (A) Try setting the TV output to PCM or

(B) Connect directly to your Blu-ray/other source, some TVs do not pass through digital audio. On the optical input, the input LEDs will flash rapidly and vocally announce "Format Not Supported"

if an unsupported format is present. Set the source to output PCM. Your TV may be set to variable audio output. Confirm that the audio output setting is set to FIXED or STANDARD, not VARIABLE. Consult your TVs user manual for more detailed information. If using Bluetooth, ensure that the volume on your source device is turned up and that the device is not muted. Ensure all cables and wires are securely connected. Connect a different source device (TV, Blu-ray player, etc) to see if the buzzing persists. If it does not, the problem may be with the original device. Connect your device to a different input on the sound bar. Replace the remote batteries with new ones. Point the remote directly at the center of the Sound Bar when pressing a button. If using a Bluetooth connection, some of the buttons on the remote may not be supported by the streaming application. (e.g., Pandora doesnt support the Back button.) LIMITED WARRANTY United States and Canada BY USING YOUR VIZIO PRODUCT YOU AGREE TO BE BOUND BY ALL THE TERMS OF THIS WARRANTY. BEFORE USING YOUR VIZIO PRODUCT, PLEASE READ THIS WARRANTY CAREFULLY. IF YOU DO NOT AGREE TO THE TERMS OF THIS WARRANTY, DO NOT USE THE VIZIO PRODUCT AND, WITHIN THIRTY (30) DAYS OF THE DATE OF PURCHASE, RETURN IT FOR A REFUND TO THE AUTHORIZED RETAILER WHERE YOU PURCHASED IT. This warranty contains a binding arbitration agreement and a class action waiver for United States residents. If you live in the United States, the binding arbitration agreement and class action waiver affect your rights under this warranty. Please read the text under the section titled Binding Arbitration Agreement; Class Action Waiver (U.S. Residents Only) carefully. How Long This Warranty Lasts For non-commercial use, VIZIO warrants the product on the terms set forth below for one (1) year from the date of original purchase. For commercial use, VIZIO warrants this product on the terms set forth below for ninety (90) days from the date of original purchase. What This Warranty Covers VIZIO warrants the product against defects in materials and workmanship when the product is used normally in accordance with VIZIOs user guides and manuals. Except where restricted by law, this warranty applies only to the original purchaser of a new product. The purchase must have been made from an authorized retailer in the United States (including Puerto Rico) or Canada. The product must also be located in the country where it was purchased at the time of warranty service. Zero Bright Pixel Defect Guarantee (Displays Only) Your product may qualify for a warranty against zero bright pixel defects for the duration of the warranty on select new product purchases. To determine if this guarantee applies to your product, refer to the models product information page at www.vizio.com, look for the zero bright pixel guarantee on the box, or contact VIZIO Technical Support at the email address or telephone number below. How to Get Service Before obtaining warranty service, you may visit www.vizio.com for additional help and troubleshooting. To obtain warranty service, contact VIZIO Technical Support via email at TechSupport@VIZIO.com or via phone at 877 MY VIZIO (877-698-4946). Your Obligations Before Service You must obtain pre-authorization before sending your product to a VIZIO service center. You may be required to supply a purchase receipt (or copy) to show that the product is within the warranty period. When you return a product to a VIZIO service center, you must ship the product in its original packaging or in packaging that affords an equal degree of protection. VIZIO Technical Support will provide instructions for packing and shipping the product to the VIZIO service center. ALL USER DATA AND DOWNLOADED APPLICATIONS STORED ON A PRODUCT WILL BE DELETED IN THE COURSE OF SOME IN-HOME AND ALL SHIP-IN WARRANTY SERVICE. If this occurs, your product will be restored to its original state. You will be responsible for restoring all applicable user data and downloaded applications. Recovery and reinstallation of user data and downloaded applications is not covered under this warranty. In order to protect your personal information, VIZIO recommends that you always clear all personal information from the product before it is serviced, regardless of the servicer. VIZIOs Responsibilities If VIZIO determines that a product is covered by this warranty, VIZIO will (at its option) repair or replace it, or refund the purchase price to you. There will be no charge for parts or labor during the warranty period. Replacement parts may be new or recertified at VIZIOs option and sole discretion. Replacement parts and VIZIOs labor are warranted for the remaining portion of the original warranty or for ninety (90) days from warranty service, whichever is longer. Types of Service Displays that are 30 inches or larger will usually be repaired in-home. If in-home repair is not available, VIZIO will provide other service options. Displays that are 40 inches or larger may be eligible for in-home replacement if in-home repair is not available. Both in-home repair and in-home replacement require complete and easy access to the product and neither includes de-installation or re-installation of the product. In-home repair and in-home replacement are subject to availability. All other VIZIO products must be sent to a VIZIO service center to obtain warranty service. VIZIO is not responsible for transportation costs to the service center, but VIZIO will cover return shipping to the customer. What This Warranty Does Not Cover This warranty does not cover: (a) cosmetic damage; (b) normal wear and tear; (c) improper operation; (d) improper voltage supply or power surges; (e) signal issues;

(f) damage from shipping; (g) acts of God; (h) customer misuse, modifications or adjustments; (i) installation, set-up, or repairs attempted by anyone other than by a VIZIO authorized service center; (j) products with unreadable or removed serial English - 26 numbers; (k) products requiring routine maintenance; or (l) products sold AS IS, CLEARANCE, FACTORY RECERTIFIED, or by a non-authorized reseller. What to Do If You Are Not Satisfied With Service If you feel VIZIO has not met its obligations under this warranty, you may attempt to resolve the issue informally with VIZIO. If you are unable to resolve the issue informally and wish to file a formal claim against VIZIO, and if you are a resident of the United States, you must submit your claim to binding arbitration according to the procedures described below, unless an exception applies. Submitting a claim to binding arbitration means that you do not have the right to have your claim heard by a judge or jury. Instead your claim will be heard by a neutral arbitrator. Binding Arbitration Agreement; Class Action Waiver (U.S. Residents Only) UNLESS YOU HAVE BROUGHT AN ELIGIBLE CLAIM IN SMALL CLAIMS COURT OR HAVE OPTED OUT AS DESCRIBED BELOW, ANY CONTROVERSY OR CLAIM RELATING IN ANY WAY TO YOUR VIZIO PRODUCT, INCLUDING ANY CONTROVERSY OR CLAIM ARISING OUT OF OR RELATING TO THIS WARRANTY, A BREACH OF THIS WARRANTY, OR THE VIZIO PRODUCTS SALE, CONDITION OR PERFORMANCE, WILL BE SETTLED BY BINDING ARBITRATION ADMINISTERED BY THE AMERICAN ARBITRATION ASSOCIATION AND CONDUCTED BY A SINGLE ARBITRATOR APPOINTED BY THE AMERICAN ARBITRATION ASSOCIATION, IN ACCORDANCE WITH ITS COMMERCIAL ARBITRATION RULES AND ITS SUPPLEMENTARY PROCEDURES FOR CONSUMER-RE-

LATED DISPUTES. You may learn more about the American Arbitration Association and its rules for arbitration by visiting www.adr.org or by calling 800-778-7879. Since this warranty concerns a transaction in interstate or international commerce, the Federal Arbitration Act will apply. The filing fees to begin and carry out arbitration will be shared between you and VIZIO, but in no event will your fees ever exceed the amount allowable by the American Arbitration Association, at which point VIZIO will cover all additional administrative fees and expenses. VIZIO waives its right to recover attorneys fees in connection with any arbitration under this warranty. If you are the prevailing party in an arbitration to which the Supplementary Procedures for Consumer-Related Disputes applies, then you are entitled to recover attorneys fees as the arbitrator may determine. The dispute will be governed by the laws of the state or territory in which you resided at the time of your purchase (if in the United States). The place of arbitration will be Irvine, California, or your county of residence (if in the United States). The arbitrator will have no authority to award punitive or other damages not measured by the prevailing party's actual damages, except as may be required by statute. The arbitrator will not award consequential damages, and any award will be limited to monetary damages and will include no equitable relief, injunction, or direction to any party other than the direction to pay a monetary amount. Judgment on the award rendered by the arbitrator will be binding and final, except for any right of appeal provided by the Federal Arbitration Act, and may be entered in any court having jurisdiction. Except as may be required by law, neither you nor VIZIO nor an arbitrator may disclose the existence, content, or results of any arbitration under this warranty without the prior written consent of you and VIZIO. ANY DISPUTE, WHETHER IN ARBITRATION, IN COURT, OR OTHERWISE, WILL BE CONDUCTED SOLELY ON AN INDIVIDUAL BASIS. VIZIO AND YOU AGREE THAT NO PARTY WILL HAVE THE RIGHT OR AUTHORITY FOR ANY DISPUTE TO BE ARBITRATED AS A CLASS ACTION, A PRIVATE ATTORNEY GENERAL ACTION, OR IN ANY OTHER PROCEEDING IN WHICH EITHER PARTY ACTS OR PROPOSES TO ACT IN A REPRESENTATIVE CAPACITY. NO ARBITRATION OR PROCEEDING WILL BE JOINED, CONSOLIDATED, OR COMBINED WITH ANOTHER ARBITRATION OR PROCEEDING WITHOUT THE PRIOR WRITTEN CONSENT OF ALL PARTIES TO ANY SUCH ARBITRATION OR PROCEEDING. Exceptions to Binding Arbitration Agreement and Class Action Waiver IF YOU DO NOT WISH TO BE BOUND BY THE BINDING ARBITRATION AGREEMENT AND CLASS ACTION WAIVER, THEN: (1) you must notify VIZIO in writing within sixty (60) days of the date that you purchased the product; (2) your written notification must be mailed to VIZIO at 39 Tesla, Irvine, CA 92618, Attn: Legal Department; and (3) your written notification must include (a) your name, (b) your address, (c) the date you purchased the product, and (d) a clear statement that you wish to opt out of the binding arbitration agreement and class action waiver. In addition, you may pursue a claim in small claims court in your county of residence

(if in the United States) or in Orange County, California. In such case the provisions of the section titled Binding Arbitration Agreement; Class Action Waiver (U.S. Residents) will not apply. Exclusions and Limitations TO THE GREATEST EXTENT PERMITTED BY APPLICABLE LAW, THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE DESCRIBED ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WILL BE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE. SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. VIZIO WILL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR DATA, COMMERCIAL LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, EVEN IF VIZIO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND EVEN IF THE REMEDY FAILS OF ITS ESSENTIAL PURPOSE. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. IN LIEU OF ANY OTHER REMEDY FOR ANY AND ALL LOSSES AND DAMAGES English - 27 RESULTING FROM ANY CAUSE WHATSOEVER (INCLUDING VIZIOS NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS, NO MATTER WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT), VIZIO MAY, AT ITS SOLE AND EXCLUSIVE OPTION AND IN ITS DISCRETION, REPAIR OR REPLACE YOUR PRODUCT, OR REFUND ITS PURCHASE PRICE. AS NOTED, SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. How the Law Applies This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state and province to province. This warranty applies to the greatest extent permitted by applicable law. General No employee or agent of VIZIO may modify this warranty. If any term of this warranty, other than the class action waiver, is found to be unenforceable, that term will be severed from this warranty and all other terms will remain in effect. If the class action waiver is found to be unenforceable, then the entire section titled Binding Arbitration Agreement; Class Action Waiver (U.S. Residents Only) will not apply. This warranty applies to the maximum extent not prohibited by law. Changes to Warranty This warranty may change without notice, but any change will not affect your original warranty. Check www.vizio.com for the most current version. Specifications Sound Bar:

One 1.61" x 2.24" Full Range Driver for each channel (1 for left, 1 for right) Subwoofer:

One 5.25 Driver Inputs:

One 3.5mm Stereo Audio One RCA Stereo Audio One Optical (Toslink) One Digital Coaxial Audio Bluetooth (Wireless) One USB Sound Pressure Level

(System):

91 dB Frequency Response

(System):

70 Hz - 20 KHz Voltage:

120 VAC, 60 Hz Compliances:

UL60065 ,FCC Class B, ICES-003 , Energy star English - 28 LEGAL & COMPLIANCE FCC Class B Radio Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. 2. 3. 4. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Notice:

1. 2. 3. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such interference. FCC RF Radiation Exposure Statement 1. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 3. FCC RF Warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. IC Statement 1. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. IC Radiation Exposure Statement This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Battery Disposal and Recycling You must dispose of this product properly, according to local laws and regulations. Because this product contains electronic components and/ or a battery, it must be disposed of separately from household waste. Contact local authorities to learn about disposal and recycling options. For more information, visit www.vizio.com/

environment. English - 41 LGALITS ET CONFORMIT nonc concernant linterfrence radio de la norme FCC Class B REMARQUE : Cet quipement a t test et trouv conforme selon les limites dun appareil numrique de Classe B, conformment la partie 15 des normes FCC. Ces limites sont conues pour fournir une protection raisonnable contre une interfrence nuisible dans une installation rsidentielle. Cet quipement gnre, utilise et peut mettre une nergie des frquences radio et peut causer une interfrence nuisible aux communications radio s'il n'est pas install et utilis selon les instructions. Toutefois, il ny a aucune garantie que des in-

terfrences nauront pas lieu dans une installation particulire. Si cet quipement gnre une interfrence nuisible la rception radio et tlvise, dtermine en allumant et teignant lappareil, nous encourageons l'utilisateur corriger l'interfrence l'aide des mesures suivantes :

1. 2. 3. 4. Cet appareil est conforme la partie 15 des normes FCC. L'utilisation est soumise aux deux conditions suivantes : (1) Cet appareil ne gnre peut-tre pas d'interfrence nuisible et (2) il doit accepter toute interfrence reue, y compris celle pouvant causer une utilisation non voulue. Rorienter ou replacer lantenne de rception. Augmenter la sparation entre lquipement et le rcepteur. Brancher lquipement sur une prise dun circuit diffrent de celui du rcepteur. Consulter le vendeur ou un technicien expriment en radio/TV pour obtenir de laide. Attention:

1. 2. 3. Tout changement ou modification apport cet appareil, non expressment approuv par le responsable de la conformit, pourrait entraner la suppression du droit de lutilisa-

teur de faire fonctionner le dispositif. Il faut utiliser des cbles dinterface et un cordon dalimentation en c.a. blinds, le cas chant, afin dobserver les limites dmission. Le fabricant nest par responsable des interfrences radio ou tlvises causes par une modification non autorise sur lquipement. L'utilisateur a la responsabilit de corriger une telle interfrence. nonc de la FCC sur lexposition aux radiations 1. Ce transmetteur ne doit pas tre plac ou utilis conjointement avec une autre antenne ou un autre transmetteur. 2. Ce dispositif est conforme aux limites dexposition aux radiations tablie par la FCC pour un environnement non contrl. Ce dispositif doit tre install et utilis en gardant une distance minimale de 20 cm entre le radiateur et votre corps. 3. Mise en garde de la FCC Ce dispositif doit tre install et utilis conformment aux directives fournies, et lantenne ou les antennes utilises pour le transmetteur doivent tre installes de manire offrir une distance de sparation dau moins 20cm par rapport toutes les personnes et ne doivent pas tre installes ou fonctionner en conjonction avec toute autre antenne ou tout autre metteur. Les utilisateurs finaux et les installateurs doivent avoir accs aux directives dinstallation de lantenne et aux conditions de fonctionnement du transmetteur permettant de se conformer aux exigences de conformit sur lexposition aux RF. nonc IC Cet appareil contient un ou des metteurs/rcepteurs exempts de licence conformes aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lutilisation est soumise aux deux conditions suivantes:

(1) Cet appareil ne gnre peut-tre pas dinterfrence.

(2) Cet appareil doit accepter toute interfrence, y compris celle pouvant causer une utilisation non voulue de lappareil. 2. Les changements et les modifications, qui ne sont pas expressment approuvs par la partie responsable de la conformit, pourraient annuler l'autorit de l'utilisateur utiliser l'quipement. nonc IC concernant l'exposition aux radiations Cet quipement est conforme aux limites d'IC RSS-102 sur l'exposition aux radiations qui sont dtermines pour un environnement non contrl. Cet quipement doit tre install et utilis avec une distance minimum de 20 cm entre le radiateur et votre corps. limination et recyclage des piles Vous devez liminer ce produit correctement, selon les lois et les rglements locaux. Puisque ce produit contient des composants lectroniques ou une pile, il doit tre limin sparment des dchets domestiques. Contactez les autorits locales pour en apprendre plus sur les options d'limination et de recyclage. Pour des renseignements supplmentaires, consultez la page www.vizio.com/environment. Franais: 41 IC Radiation Exposure Statement This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Battery Disposal and Recycling You must dispose of this product properly, according to local laws and regulations. Because this product contains electronic components and/or a battery, it must be disposed of separately from household waste. Contact local authorities to learn about disposal and recycling options. For more information, visit www.vizio.com/environment. Software Licenses All software is provided subject to software license agreements and you agree that you will be bound by such license agreements in addition to other applicable terms of use. By using the VIZIO products, you agree to the VIZIO Terms of Service and Privacy Policy, as well as Googles Terms of Service and Privacy Policy. The VIZIO Terms of Use and Privacy Policy may be updated from time to time and are available to view at http://www.vizio.com/ terms and http://www.vizio. com/privacy, respectively. Export Regulations Customer acknowledges that the VIZIO products, which include technology and software, are subject to customs and export control laws in the United States

(US). The products may also be subject to the customs and export control laws and regulations of the country in which the products are manufactured and/

or received. The applications and content of the applications pictured herein or described in accompanying documentation may only be available in certain countries or languages, may require additional fees or subscription charges, and may be subject to future updates, modifications or discontinuation without notice. VIZIO has no control over third party applications or content and assumes no responsibility for the availability or interruption of such applications or content. Additional third party terms, conditions and restrictions apply. A Google account is required to download applications from the Google Play store. A MyVIZIO account is required to access certain features of the VIZIO SmartCast app. Information in this User Manual is subject to change without notice. To review the most updated version of this User Manual and the associated Quick Start Guide, go to http://www.vizio.com. 2019 VIZIO, Inc. All Right Reserved. Image(s) used under license from Shutterstock.com This User Manaual may not be copied in whole or in part without the written permission of VIZIO, Inc. VIZIO, Inc. has made reasonable efforts to ensure the accuracy of the information provided herein. ll product specifications, functionality, features, configurations, performance, design and other product information described herein are subject to change without notice. VIZIO, Inc. is not responsible for typographical, technical, or descriptive errors. VIZIO, the VIZIO logo, the V logo, and other terms and phrases are trademarks or registered trademarks of VIZIO, Inc. Sound pressure level measured using pink noise at 1 meter, c-weighted. English - 30 Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright 1992-2015 Dolby Laboratories. All rights reserved. The Bluetooth word mark and Logos are registered trademark owned by Bluetooth SIG,Inc. and any use of such marks by VIZIO, Inc. is under license. Other trademarks and trade names are those of their respective owners. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, &

DTS and the Symbol together are registered trademarks, and DTS TruVolume is a trademark of DTS, Inc. DTS, Inc. All Rights Reserved. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, the Symbol, DTS and the Symbol together, Virtual:X, and the DTS Virtual:X logo are registered trademarks and/or trademarks of DTS, Inc. in the United States and/or other countries. DTS, Inc. All Rights Reserved. This product qualifies for ENERGY STAR in the factory default setting and this is the setting in which power savings will be achieved. Changing the factory default settings or enabling other features will increase power consumption that could exceed the limits necessary to qualify for ENERGY STAR rating. We want to help you save energy. English - 31 2019 VIZIO INC. ALL RIGHTS RESERVED. 190712SL English - 32