submitted | available | document details (if available) | source link |
---|---|---|---|
June 03 2016 | June 03 2016 | untitled Acrobat Distiller 15.0 (Windows) |
various | User manual | Users Manual | 1.63 MiB | June 03 2016 |
VIZIO QUICK START GUIDE Model: SB2920-D6 IMPORTANT SAFETY INSTRUCTIONS
be observed for its installation, use, and maintenance. Please read the following safety instructions before operating your Unit. Keep these instructions in a safe place for future reference. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided
Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time.
been damaged in any way, such as when the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
connecting other components to your Unit.
use a liquid or a spray cleaner on your Unit. Do not use abrasive cleaners. Always use the accessories recommended by the manufacturer to insure compatibility. When moving your Unit from an area of low temperature to an area of high temperature,
electric shock, or component damage. Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of your Unit and to protect it from overheating, be sure these openings are not blocked or covered. Do not place your Unit in a bookcase or cabinet unless proper ventilation is provided. Never push any object into the slots and openings on your Unit enclosure. Do not place any
Never spill liquids on your Unit.
power, unplug the power cord.
electric shock. The wall socket should be located near your Unit and be easily accessible Keep your Unit away from moisture. Do not expose your Unit to rain or moisture. If water penetrates into your Unit, unplug the power cord and contact your dealer. Continuous use in
Do not use your Unit if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair your unit yourself. Avoid using dropped or damaged appliances. If your Unit is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord
electric shock. Do not install your Unit in an area with heavy dust or high humidity. Operating your Unit in
Ensure that the power cord and any other cables are unplugged before moving your Unit. When unplugging your Unit, hold the power plug, not the cord. Pulling on the power cord may
used for an extended period of time, unplug the power cord. To reduce risk of electric shock, do not touch the connector with wet hands. Insert the remote control batteries in accordance with instructions. Incorrect polarity may cause the battery to leak which can damage the remote control or injure the operator. See the important note and rating located on the back of the unit.
to dripping, splashing, rain, or moisture.
Do not leave the batteries exposed to direct sunlight for a long period of time with doors and
Where the MAINS plug or appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Explanation of WARNING symbols:
alert the user to the presence of not isolated dangerous voltage within the product
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance. TABLE OF CONTENTS Package Contents .................................................................... 4 Controls & Connections .......................................................... 5 First-Time Setup....................................................................... 7 Using the Remote .................................................................... 11 LED Indicators .......................................................................... 12 Bluetooth Pairing ..................................................................... 14 Using Bluetooth Mode ............................................................ 15 Advanced Setup ....................................................................... 16 Connecting a Subwoofer ....................................................... 17 Using Button Combinations ................................................... 18 Wall-Mounting the Sound Bar ................................................ 19 Help & Troubleshooting .......................................................... 23 One-Year Limited Warranty .................................................... 26 Legal & Compliance ................................................................. 27 PACKAGE CONTENTS
Remote Control with 2 x AAA Batteries Quick Start Guides
(1 English, 1 French/Spanish) Power Adapter Coaxial Audio Cable Stereo RCA to 3.5mm Audio Cable Digital Optical Cable 2 x Sound Bar Wall Mount Brackets 2 x Wall Mount Screws
(Size: M4 x 10mm) 4 Wall Mount Template CONTROLS & CONNECTIONS Back of Sound Bar SUB OUT Subwoofer Out OPTICAL (4) Digital Optical Audio In DIGITAL (3) Coaxial In AUX (2) Analog Audio In
(Stereo 3.5mm) AUX (1) Analog Audio In
(Stereo RCA)
5 USB* (6) USB In Power Port Bluetooth Input Hold to pair.
(See Bluetooth Pairing for more information.) Volume Increase or decrease the loudness of the audio. Input Press to change the audio source. Power Top of Sound Bar 6 FIRST-TIME SETUP 1 CHOOSE ONE CABLE GOOD OR BETTER Back of Sound Bar DIGITAL OPTICAL CABLE BETTER DIGITAL COAXIAL CABLE BETTER 3.5MM TO RCA CABLE GOOD 3.5MM TO RCA CABLE GOOD AND CONNECT IT TO YOUR TV
* Not all TVs have the audio outputs shown above. To connect the Sound Bar directly to your other devices (Blu-Ray player, game system, etc.) see your devices user manual. When using either of the Digital Inputs, if there is no audio: (A) try setting the TV output to PCM or (B) Connect directly to your Blu-ray/other source, some TVs do not pass through digital audio. Cable not included. 7 2 Connect the included power adapter to the Sound Bar DC IN as shown. Plug the power adapter into an electrical outlet. 8 3 For the best surround sound experience, position the Sound Bar as shown. The Sound Bar should be close to ear level. Sound Bar is centered below the TV. 9 4 Top 5 Top Remove the battery cover by gently sliding it away from the remote. Insert the included batteries and gently slide the battery cover back into place. 6 Turn your TV on, the Sound Bar will automatically turn on and begin searching for an active input. The LED indicators on the front of the Sound Bar will begin cycling in pairs through inputs until an audio source is detected.*
Tip: Pressing the INPUT button will stop the auto detect function. You can press the INPUT button to switch between audio sources. For example, if you connected your TV to Input 1, set the Sound Bar to Input 1. Power Input
Reset (see the Using Button Combinations section for more information) or press and hold the INPUT button for 3 seconds. 10 USING THE REMOTE Input Press to change input source.
(Press and Hold for 3 seconds to enable the Auto Input Detection mode) Power
Volume +/-
Press to increase and decrease volume. Previous Press to return to previous track.
(Changes Treble and Bass levels) TruVolume Press to enable/disable TruVolume. Bass Press to enter bass adjustment mode. Mute Press to mute/unmute. Bluetooth Press to enter Bluetooth input.
(To enter force pair mode, press and hold for 5 seconds) Enter/Play/Pause Press to select an option. Press to play or pause. Next Press to skip to the next track.
(Changes Treble and Bass levels) TruSurround HD Press to enable/disable TruSurround HD. Treble Press to enter treble adjustment mode. EQ Press to cycle between Movie and Music audio modes.
(Movie mode is on by default) 11 LED INDICATORS
Function Description LED Behavior LED Indicators are located here. Input
) 1
(
X U A
-
n I i o d u A g o a n A l
) 2
(
X U A
-
n I i o d u A g o a n A l
) 3
(
l a t i g D i
-
n I l i a x a o C n I i o d u A l a c i t p O l a t i g D i
) 4
(
l a c i t p O h t o o t e u B l
) 6
(
B S U
-
n I B S U Press the INPUT button on the remote to cycle through the available inputs:
Analog Audio In - AUX Stereo RCA (1) Analog Audio In - AUX Stereo 3.5mm (2) Coaxial In - Digital (3) Digital Optical Audio In - Optical (4) Bluetooth USB In - USB (6) Bluetooth Pairing
(When searching for device) Flash from the bottom to top and back continuously. Press and hold the button on the remote. The Sound Bar will be discoverable for 15 minutes. You can now search for the Sound Bar (VIZIO SB2920) using your Bluetooth Device. The sound bar will power down if no device is found. Note: Set your Bluetooth device into pairing mode prior to the Sound Bar. DTS TruVolume On/O TruVolume On
Press the TVOL button to enable/disable TruVolume. When enabled (On), TruVolume provides a consistent and comfortable volume level for a more enjoyable listening experience. 12 Function LED Behavior Description LED Indicators are located here. DTS TruSurround On/O TruSurround On
Press the TSHD button to enable/disable DTS TruSurround. When enabled (On),
playback in stereo. Treble Levels Two center LEDs indicate Treble level 0. Press the TREBLE button then press the Next/Previous button to increase/decrease the treble level. The LED indicators will move up with increasing levels and down with decreasing levels. Bass Levels Two center LEDs indicate Bass level 0. Press the BASS button then press the Next/Previous button to increase/decrease the bass level. The LED indicators will move up with increasing levels and down with decreasing levels. 13 BLUETOOTH PAIRING To pair the Sound Bar with a Bluetooth device:
1. Press and hold the Bluetooth button on the Sound Bar or the Bluetooth button
Pairing Mode, the LED Indicators on the Display Panel on the front of the Sound Bar will light sequentially from bottom to top and back again. on the remote for Once the device is paired, the LED Indicators will stop
2. You can now search for the Sound Bar (VIZIO SB2920) using your Bluetooth device. For more information, refer to the user documentation that came with the device. 3. Play audio from your Bluetooth device. Volume can be controlled on your source device and the Sound Bar. Top of Sound Bar Bluetooth Device 14 USING BLUETOOTH MODE Your Sound Bar supports music streaming from smartphones, tablets, and computers with Bluetooth capability. Device compatibility will vary, see your devices documentation for more information. Once you have paired your source device to the Sound Bar, as long as you stay within range of the Sound Bar, your device should remain paired, even if you change the input on the Sound Bar. Your Sound Bar is not equipped with a microphone, so it cannot operate as a hands-free device for a smartphone. Maximizing Signal A Bluetooth signal has a range of up to 30 feet. Keep in mind that Bluetooth is a compressed audio format, so streamed music may lose some integrity when compared to a wired connection. Try the following if your sound quality is less than optimal:
If you hear any break-up or disconnect while streaming music from your device, move the source device closer to the Sound Bar. Be sure that there are no solid obstructions in the line-of-sight be-
tween the Sound Bar and the source device.
security cameras, wireless video baby monitors, cordless phones, and
Bluetooth range. Reduce the volume levels on your device and on the Sound Bar before pressing Play. High volume levels can damage your hearing. 15 ADVANCED SETUP Back of Sound Bar DIGITAL OPTICAL CABLE DIGITAL COAXIAL CABLE 3.5MM TO RCA CABLE 3.5MM TO RCA CABLE Game Console Network Media Player
16 Tablet/MP3 Player/Laptop USB Thumb Drive*
CONNECTING A SUBWOOFER Back of Sound Bar To connect a subwoofer:
1. Press the BASS button on the remote control to enter bass adjustment mode. 2. Use the Previous/Next buttons to adjust the bass level to the center position. 3. Power O the Sound Bar and Subwoofer. Connect an RCA cable from the Sound Bar to the Subwoofer. 4. Power On the Sound Bar and Subwoofer. 5. Manually adjust the SUB gain (Volume) and phase to your preference. See your subwoofers user manual for more information. 6. Use the BASS button on the remote control to adjust the subwoofers output. RCA Subwoofer Cable*
Optional Subwoofer*
17
* RCA subwoofer cable and subwoofer not included. USING BUTTON COMBINATIONS
Function LED Behavior Description Buttons are located here. Factory Reset All 12 LEDs will
Reset the Sound Bar to the factory default settings. To perform a Factory Reset, Press and Hold the Bluetooth(
5 seconds.
) and Volume Down () buttons for Note: This will erase all settings and preferences that you have set. VIZIO TV Remote Control VIZIO TV Remote Enabled VIZIO TV Remote Disable Enable/disable the use of a VIZIO TV remote control to power on and adjust the volume of the sound bar. To enable/disable this function,
) and Volume Up ( + ) buttons for 5 seconds. Press and Hold the Power (
Note: This function is enabled by default. Energy Star Energy Star Enabled Energy Star Disabled When the Energy Star setting is enabled, the sound bar will automatically power down after a period of inactivity. When disabled, the sound bar
function, Press and Hold the Power (
for 5 seconds.
) and Volume Down () buttons Note: Energy Star setting is enabled by default. 18 WALL-MOUNTING THE SOUND BAR 1 Back of Sound Bar Wall-Mount Screw Holes Insert the two wall-mount screws into the wall-mount screw holes, and then tighten them with a Phillips screwdriver. 2 Place the included wall mounting template against the wall under your TV. Mark the four bracket holes using a pencil. 19 3 Be sure your screws are attached to wood studs, drywall anchors
(for drywall), or concrete anchors
(for brick/concrete walls). Screws for attaching the brack-
ets to the wall are not included. Choose the screw type and length appropriate to your homes construction. If in doubt, consult a professional installer. 22.58 in (57.36 cm) If you are unfamiliar with power tools or the layout of electrical wiring in the walls of your home, consult a professional installer. Wall Mount Screw Screw Size: M4 x 10 20 VIZIO RECOMMENDS Picture Perfect. Simply Smart. All-new for 2014, the E-Series is packaged in a sleek new design. Experience more vibrant colors, more pronounced darks, more premium apps, and truly epic entertainment at an unbeatable value on the all-new, beautifully redesigned E-Series. Available at VIZIO.com 21 Product sold separately VIZIO RECOMMENDS Premium High Speed HDMI Cable
Available at VIZIO.com 22 Product sold separately HELP & TROUBLESHOOTING There is no power. Press the POWER button on the remote control or on the top of your Sound Bar. Ensure the power cord is securely connected.
There is no sound. I hear buzzing or humming.
Volume Up on the remote control or on the top of your Sound Bar. Press MUTE on the remote to ensure the Sound Bar is not muted. Press INPUT When using either of the Digital Inputs, if there is no audio: (A) Try setting the TV output to PCM or (B) Connect directly to your Blu-ray/other source, some TVs do not pass through digital audio.
FIXED or STANDARD, not VARIABLE. Consult your TVs user manual for more detailed information.
Ensure all cables and wires are securely connected.
The remote
Replace the remote batteries with new ones. Point the remote directly at the center of the Sound Bar when pressing a button. If using a Bluetooth connection, some of the buttons on the remote may not be supported by the streaming application.
23 Do You Have Questions? Find Answers At SUPPORT.VIZIO.COM Find help with:
New Product Setup Connecting Your Devices Technical Problems Product Updates And More Live Chat Support Available You can also contact our award-winning support team at:
Phone:
Email:
(877) 878-4946 (TOLL-FREE) techsupport@VIZIO.com Hours Of Operation:
Monday - Friday: 7 AM TO 11 PM (CST) Saturday - Sunday: 9 AM TO 6 PM (CST) Take A Moment To Register Your Product At VIZIO.COM/PRODUCT-REGISTRATION Why Register?
Customized Support Get assistance quickly with your information on-hand. News & Offers Take advantage of the latest news and special offers from VIZIO. Safety & Satisfaction Stay up to date with important product updates and notifications. REGISTER YOUR VIZIO PRODUCT NOW ONE-YEAR LIMITED WARRANTY ON PARTS AND LABOR Covers units purchased as new in United States and Puerto Rico Only VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one year of non-commercial usage and ninety (90) days of commercial use. If a Product covered by this warranty is determined to be defective within the warranty period, VIZIO will either repair or replace the Product at its sole option and discretion. To obtain warranty service, contact VIZIO Technical Support via email: TechSupport@VIZIO.com or via phone at 877 MY VIZIO (877.698.4946) from 7:00AM to 11:00PM Monday through Friday and 9:00AM to 6:00PM Saturday and Sunday, Central Time, or visit www.VIZIO.com. PRE-AUTHORIZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER. Proof of purchase in the form of a purchase receipt or copy thereof is required to show that a Product is within the warranty period. Parts and Labor
Products are warranted for the remaining portion of the original warranty or for ninety (90) days from warranty service or replacement, whichever is greater. Type of Service Defective Products must be sent to a VIZIO service center to obtain warranty service. VIZIO is not responsible for transportation costs to the service center, but VIZIO will cover return shipping to the customer. PRE-AUTHORIZATION IS REQUIRED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER FOR WARRANTY SERVICE.
provide instructions for packing and shipping the covered Product to the VIZIO service center. Limitations and Exclusions VIZIOs one-year limited warranty only covers defects in materials and workmanship. This warranty does not cover, for example: cosmetic damage, normal wear and tear, improper operation,
issues or any repairs attempted by anyone other than by a VIZIO authorized service center. Products with unreadable or removed serial numbers, or requiring routine maintenance are not covered. This one year limited warranty does not cover Products sold AS IS, FACTORY RECERTIFIED, or by a non-authorized reseller. THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. VIZIOS TOTAL LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER INCLUDING VIZIOS NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS, WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT. VIZIO SHALL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR DATA, COMMERCIAL LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE. THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE. CHECK www.VIZIO.com FOR THE MOST CURRENT VERSION. Specications Sound Bar:
Two 2 Full-Range Drivers Inputs:
One 3.5mm Stereo Audio One RCA Stereo Audio One Optical (Toslink) One Digital Coaxial Audio USB Bluetooth (Wireless) Sound Pressure Level (System):
Frequency Response (System):
Voltage:
Compliances:
95 dB 75 Hz - 90 Hz to 19 KHz 120 VAC, 60 Hz UL, FCC, cUL, NRCAN 26 LEGAL & COMPLIANCE FCC Class B Radio Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful LQWHUIHUHQFHWRUDGLRRUWHOHYLVLRQUHFHSWLRQZKLFKFDQEHGHWHUPLQHGE\WXUQLQJWKHHTXLSPHQWRDQGRQWKHXVHULVHQFRXUDJHGWRWU\WRFRUUHFWWKHLQWHUIHUHQFHE\RQHRUPRUHRIWKHIROORZLQJ
measures:
1. 2.
4. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interfer-
ence received, including interference that may cause undesired operation. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
&RQQHFWWKHHTXLSPHQWLQWRDQRXWOHWRQDFLUFXLWGLHUHQWIURPWKDWWRZKLFKWKHUHFHLYHULVFRQQHFWHG
Consult the dealer or an experienced radio/TV technician for help. Notice:
2.
7KHFKDQJHVRUPRGLFDWLRQVQRWH[SUHVVO\DSSURYHGE\WKHSDUW\UHVSRQVLEOHIRUFRPSOLDQFHFRXOGYRLGWKHXVHUVDXWKRULW\WRRSHUDWHWKHHTXLSPHQW
Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits. 7KHPDQXIDFWXUHULVQRWUHVSRQVLEOHIRUDQ\UDGLRRU79LQWHUIHUHQFHFDXVHGE\XQDXWKRUL]HGPRGLFDWLRQWRWKLVHTXLSPHQWWLVWKHUHVSRQVLELOLWLHVRIWKHXVHUWRFRUUHFWVXFKLQWHUIHUHQFH
RF Exposure Information This device meets the governments requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. IC Statement 1. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
Canada's licence-exempt RSSs. Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
&KDQJHVRUPRGLFDWLRQVQRWH[SUHVVO\DSSURYHGE\WKHSDUW\UHVSRQVLEOHIRUFRPSOLDQFHFRXOGYRLGWKHXVHUVDXWKRULW\WRRSHUDWHWKHHTXLSPHQW
exempts de licence. Lexploitation est autorise aux deux conditions suivantes:
3. Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada . Son fonctionnement est soumis aux deux 1. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio conditions suivantes :
( 1 ) Ce dispositif ne peut causer d'interfrences ; et
( 2 ) Ce dispositif doit accepter toute interfrence , y compris les interfrences qui peuvent causer un mauvais fonctionnement de l'appareil.
(1) lappareil ne doit pas produire de brouillage, et
(2)lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. IC Radiation Exposure Statement This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Disposal and Recycling You must dispose of this product properly, according to local laws and regulations. Because this product contains electronic components and a battery, it must be disposed of separately from household waste. Contact local authorities to learn about disposal and recycling options. Other:
Image(s) used under license from Shutterstock.com 27 For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Inc. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS TruSurround is a trademark of DTS, Inc. DTS, Inc. All Rights Reserved. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Inc. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS TruVolume is a trademark of DTS, Inc. DTS, Inc. All Rights Reserved. 7KLV SURGXFW TXDOLHV IRU (1(5*< 67$5 LQ WKH IDFWRU\
default setting and this is the setting in which power savings will be achieved. Changing the factory default settings or enabling other features will increase power consumption that could exceed the limits necessary to qualify for ENERGY STAR rating. We want to help you save energy. 2016 VIZIO INC. ALL RIGHTS RESERVED. 160126OC-US-NC
This product uses the FCC Data API but is not endorsed or certified by the FCC