| submitted | available | document details (if available) | source link |
|---|---|---|---|
| February 26 2013 | February 26 2013 | Adobe PDF Library 10.0.1 |
| various | Users Manual | Users Manual | 3.57 MiB | February 26 2013 |
VIZIO Quick Start Guide Model: VSB207BT literature accompanying your Sound Bar. Do not overload power strips and extension cords. Overloading can result in fire or electric shock. The wall socket should be located near your Sound Bar and be easily accessible Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms. Unplug your Sound Bar during a lightning storm or when it will not be used for long periods of time. This will protect your Sound Bar from damage due to power surges. Do not attempt to repair or service Sound Bar yourself. Opening or removing the front cover may expose you to high voltages, electric shock, and other hazards. If repair is required, contact your dealer and refer all servicing to qualified service personnel. Keep your Sound Bar away from moisture. Do not expose your Sound Bar to rain or moisture. If water penetrates into your Sound Bar, unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock. Do not use your Sound Bar if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair your Sound Bar yourself. Avoid using dropped or damaged appliances. If your Sound Bar is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of your Sound Bar may cause fire or electric shock. Do not install your Sound Bar in an area with heavy dust or high humidity. Operating your Sound Bar in environments with heavy dust or high humidity may cause fire or electric shock. Ensure that the power cord and any other cables are unplugged before moving your Sound Bar. When unplugging your Sound Bar, hold the power plug, not the cord. Pulling on the power cord may damage the wires inside the cord and cause fire or electric shock. When your Sound Bar will not be used for an extended period of time, unplug the power cord. To reduce risk of electric shock, do not touch the connector with wet hands. Insert the remote control battery in accordance with instructions. Incorrect polarity may cause the battery to leak which can damage the remote control or injure the operator. If any of the following occurs, contact the dealer: - The power cord fails or frays - Liquid sprays or any object drops into your Sound Bar - Sound Bar is exposed to rain or other moisture - Sound Bar is dropped or damaged in any way - The performance of your Sound Bar changes substantiallyYour Sound Bar is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent your Sound Bar from being damaged, the following rules should be observed for its installation, use, and maintenance. Please read the following safety instructions before operating your Sound Bar. Keep these instructions in a safe place for future reference. To reduce the risk of electric shock or component damage, switch off the power before connecting other components to your Sound Bar. Unplug the power cord before cleaning your Sound Bar. A damp cloth is sufficient for cleaning. Do not use a liquid or a spray cleaner on your Sound Bar. Do not use abrasive cleaners. Always use the accessories recommended by the manufacturer to insure compatibility. When moving your Sound Bar from an area of low temperature to an area of high temperature, condensation may form in the housing. Wait before turning on your Sound Bar to avoid causing fire, electric shock, or component damage. A distance of at least 3 feet should be maintained between your Sound Bar and any heat source, such as a radiator, heater, oven, amplifier etc. Do not install your Sound Bar close to smoke. Operating your Sound Bar close to smoke or moisture may cause fire or electric shock. Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of your Sound Bar and to protect it from overheating, be sure these openings are not blocked or covered. Do not place your Sound Bar in a bookcase or cabinet unless proper ventilation is provided. Never push any object into the slots and openings on your Sound Bar enclosure. Do not place any objects on the top of your Sound Bar. Doing so could short circuit parts causing a fire or electric shock. Never spill liquids on your Sound Bar. Your Sound Bar should be operated only from the type of power source indicated on the label on the AC/DC Adapters. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. Only power of the marked voltage can be used for your Sound Bar. Any other voltage than the specified voltage may cause fire or electric shock The power cord must be replaced when using different voltage than the voltage specified. For more information, contact your dealer. Your Sound Bar AC/DC Adapters are equipped with a three-pronged grounded plug (a plug with a third grounding pin). This plug will fit only into a grounded power outlet. This is a safety feature. If your outlet does not accommodate the three-pronged, have an electrician install the correct outlet, or use an adapter to ground your Sound Bar safely. Do not defeat the safety purpose of the grounded plug. When connected to a power outlet, power is always flowing into your Sound Bar. To totally disconnect power, unplug the power cord. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un-isolated, dangerous voltage within your Sound Bar that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the h important safety instructions WARNING DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD The remote control supplied with this product contains a coin/button cell battery. If the coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just two (2) hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. A warning that batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire, or the like. Package conTenTS High Definition Sound Bar Sub -
Sub +
Input DTS Remote Control with Battery VIZIO Quick Start Guide Model: VSB207BT Power Adapter w/Cable This Quick Start Guide Stereo RCA to 3.5mm Audio Cable Optical Cable conTrolS & connecTionS Power Press to turn Sound Bar on or off. Input Press to change input source
(Input 1, Input 2, etc.). Bluetooth Press for direct access to Bluetooth input Hold to pair Bluetooth source. Volume + / -
Press to increase/
decrease system volume. Input 2
(Stereo 3.5mm) Power Port Input 1
(Stereo RCA) Service Port For use only by service technician. Optical Input
(Toslink) Sub Out
(RCA) DiSPlay Panel FirST-TiMe SeTuP The Display Panel on the front of the Sound Bar has indicator lights that provide information about the functionality of the Sound Bar. Power Light DTS Light Input Lights FirST-TiMe SeTuP 1 BACK OF SOUND BAR BeSt CHOOSE ONE Good Good AUDIO OUT AUDIO OUT AUDIO OUT Connect one of the included cables to ONE TV audio output as shown.**
BACK OF YOUR TV*
*Not all TVs have the audio outputs shown above. To connect the Sound Bar directly to your other devices (Blu-ray player, game system, etc) see your devices user manual.
**If using the Optical Input, make sure your TVs audio is set to PCM output 2 3 4 Sound Bar is centered below the TV. For the best surround sound experience, position the Sound Bar as shown.*
The Sound Bar should be close to ear level. Power Turn your TV on, then press the Power button on the remote to turn the Sound Bar on. Press the input button to switch between audio sources. For example, if you connected your TV to input 1, set the Sound Bar to input 1. Sub -
Sub +
Setup is complete. Input Input DTS uSing The reMoTe Power Press to turn on or off. Mute Press to mute/unmute. Sub -
Press to decrease subwoofer volume.*
Fast-Rewind/Back Press and hold to fast rewind. Press to return to previous track. Play/Pause Press to Play or Pause. Input Press to change input source. For best results, point the remote at the right side of the Sound Bar. The sensor is located there. Sub -
Sub +
Input DTS Volume Up Press to increase volume. Sub +
Press to increase subwoofer volume.*
Fast-Forward/Next Press and hold to fast forward. Press to skip to the next track. Volume Down Press to decrease volume. DTS Press to activate DTS Sound.
*Only when aftermarket subwoofer is connected. BlueTooTh Pairing To pair the Sound Bar with a Bluetooth device:
1. Make sure your Bluetooth device is in discovery mode. For more information, see the documentation that came with your device. 2. Press and hold the Bluetooth button on the Sound Bar for five (5) seconds. When the Sound Bar is in Bluetooth Pairing Mode, the Indicator Lights on the Display Panel on the front of the Sound Bar will light sequentially from left to right and back again. Once the device is paired, the Indicator Lights will stop flashing. 3. Play audio from your Bluetooth device. Volume can be controlled on your source device and the Sound Bar. uSing BlueTooTh MoDe your Sound Bar supports music streaming from smartphones, tablets, and computers with Bluetooth capability. Device compatibility will vary, see your devices documentation for more information. once you have paired your source device to the Sound Bar, as long as you stay within range of the Sound Bar, your device should remain paired, even if you change the input on the Sound Bar. your Sound Bar device for a smartphone. is not equipped with a microphone, so it cannot operate as a hands-free Maximizing Signal a Bluetooth signal has a range of up to 30 feet. keep in mind that Bluetooth is a compressed audio format, so streamed music may lose some integrity when compared to a wired connection. Try the following if your sound quality is less than optimal:
if you hear any break-up or disconnect while streaming music from your device, move the source device closer to the Sound Bar. Be sure that there are no solid obstructions in the line-of-sight between the Sound Bar and the source device. check the volume on your device and on the Sound Bar before pressing Play. high volume levels can damage your hearing. changing The inPuT Source you can connect up to 4 devices to your Sound Bar at once. To switch between the sources, press the input button on the Sound Bar or the remote until the source you wish to use is selected. The indicator lights on the display panel will illuminate to show which input source has been selected. CHANGING THE BATTERY Input Lights RCA 3.5mm Optical*
Bluetooth
*In order for the Optical Input to decode sound, the source output must be set to PCM. See the documentation that came with the source device for more information. If the incorrect source format is detected, the Input 3 (Optical) Indicator Lights will flash quickly. CHANGING THE BATTERY 1 2 Insert a flat-head screwdriver into the slot as shown. Gently push down on the tab, then press and pull downward on the battery cover to open. Replace the old battery with a new CR2032. Be sure that the + sign on the battery is facing up. Push the battery cover until it clicks back into place. CONNECTING A SUBWOOFER 1 BACK OF SOUND BAR Remove the screw from the Sound Bar stands and rotate as shown. TURN BOTH SOUND BAR AND SUBWOOFER OFF. CONNECT AN RCA CABLE* TO YOUR SUBWOOFER*. The volume on your Subwoofer must be manually adjusted. See your Subwoofers user manual for details on proper operation.
*NOT INCLUDED WALL MOUNTING THE SOUND BAR 1 Remove the screw from the Sound Bar stands and rotate as shown. 26 3/4
(67.95 cm) 2 Be sure your screws are attached to wood studs or drywall anchors (for drywall) or concrete anchors (for brick/concrete walls). Wall mounting hardware is not included. If you are unfamiliar with power tools or the layout of electrical wiring in the walls of your home, consult a professional installer. Reattach stands using the included screw. HELP & TROUBLESHOOTING All VIZIO products include FREE lifetime technical support. The VIZIO support team is highly trained and is based in the United States. We can help with:
Product Setup Technical Problems Warranty Questions And More Hours of operation:
Monday - Friday: 5 AM TO 9 PM (PST) Saturday - Sunday: 8 AM TO 4 PM (PST) Phone:
Email:
Web:
(877) 698-4946 (TOLL-FREE) techsupport@VIZIO.com www.VIZIO.com/support There is no power. Press the POWER button on the remote control or on the top of your Sound Bar. Ensure the power cord is securely connected. Ensure the light on the power adapter is glowing green. Plug a different device into the electrical outlet to verify that the outlet is working correctly. There is no sound. Increase the volume. Press Volume Up on the remote control or on the top of your Sound Bar. Press MUTE on the remote to ensure the Sound Bar is not muted. Press INPUT on the remote or on the top of your Sound Bar to select a different input source. If you are using a SPDIF/Optical connection, make sure your TV is set to PCM audio output. Your TV may be set to variable audio output. Confirm that the audio output setting is set to FIXED or STANDARD, not VARIABLE. Consult your TVs user manual for more detailed information. If using Bluetooth, ensure that the volume on your source device is turned up and that the device is not muted. I hear buzzing or humming. Ensure all cables and wires are securely connected. Connect a different source device (TV, Blu-ray player, etc) to see if the buzzing persists. If it does not, the problem may be with the original device. Connect your device to a different input on the Sound Bar. The remote isnt working. Replace the remote battery with a new one. Point the remote directly at the Sound Bar when pressing a button. If using a Bluetooth connection, some of the buttons on the remote may not be supported by the streaming application. (e.g., a music streaming app may not support the Back/Fast Rewind button.) The audio is distorted in Bluetooth mode. Move the source device closer to the Sound Bar. (Bluetooth signal has a range of up to 30 feet) Move the source device away from other devices with a wireless signal. They may be interfering. Restart both your source device and the Sound Bar. Re-pair the source device with the Sound Bar. ONE-YEAR LIMITED WARRANTY LEGAL & COMPLIANCE ON PARTS AND LABOR Covers units purchased as new in United States and Puerto Rico Only VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one year of non-commercial usage and ninety (90) days of commercial use. If a Product covered by this warranty is determined to be defective within the warranty period, VIZIO will either repair or replace the Product at its sole option and discretion. To obtain warranty service, contact VIZIO Technical Support via email: TechSupport@VIZIO.com or via phone at 877 MY VIZIO (877.698.4946) from 5:00AM to 9:00PM Monday through Friday and 8:00AM to 4:00PM Saturday and Sunday, Pacific Time, or visit www.VIZIO.com. PRE-AUTHORIZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER. Proof of purchase in the form of a purchase receipt or copy thereof is required to show that a Product is within the warranty period. Parts and Labor There will be no charge for parts or labor during the warranty period. Replacement parts and Products may be new or recertified at VIZIOs option and sole discretion. Replacement parts and Products are warranted for the remaining portion of the original warranty or for ninety (90) days from warranty service or replacement, whichever is greater. Type of Service Defective Products must be sent to a VIZIO service center to obtain warranty service. VIZIO is not responsible for transportation costs to the service center, but VIZIO will cover return shipping to the customer. PRE-AUTHORIZATION IS REQUIRED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER FOR WARRANTY SERVICE. Product returns to VIZIOs service centers must utilize either the original carton box and shipping material or packaging that affords an equal degree of protection. VIZIO Technical Support will provide instructions for packing and shipping the covered Product to the VIZIO service center. Limitations and Exclusions VIZIOs one-year limited warranty only covers defects in materials and workmanship. This warranty does not cover, for example: cosmetic damage, normal wear and tear, improper operation, improper voltage supply or power surges, signal issues, damages from shipping, acts of God, any type of customer misuse, modifications or adjustments, as well as installation and set-up issues or any repairs attempted by anyone other than by a VIZIO authorized service center. Products with unreadable or removed serial numbers, or requiring routine maintenance are not covered. This one year limited warranty does not cover Products sold AS IS, FACTORY RECERTIFIED, or by a non-authorized reseller. THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. VIZIOS TOTAL LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER INCLUDING VIZIOS NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS, WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT. VIZIO SHALL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR DATA, COMMERCIAL LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE. THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE. CHECK www.VIZIO.com FOR THE MOST CURRENT VERSION. SPECIFICATIONS Sound Bar:
Inputs:
Outputs:
Two High-Efficiency Full-Range Transducers 1 x 3.5mm Stereo Audio 1 x RCA Stereo Audio 1 x Optical (Toslink) 1 x RCA Subwoofer Out Sound Pressure Level:
Frequency Response (Sound Bar):
Voltage:
Compliances:
86 dB 90 Hz - 19.5 KHz 100-240 VAC, 50-60 Hz UL, FCC FCC Class B Radio Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Notice:
1. The changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits. 3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such interference. RF Exposure Information This device meets the governments requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. IC Statement Operation is subject to the following two conditions:
1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. IC Radiation Exposure Statement This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Disposal and Recycling You must dispose of this product properly, according to local laws and regulations. Because this product contains electronic components and a battery, it must be disposed of separately from household waste. Contact local authorities to learn about disposal and recycling options. Other:
Image(s) used under license from Shutterstock.com VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one year of non-commercial usage and ninety (90) days of commercial use. If a Product covered by this warranty is determined to be defective within the warranty period, VIZIO will either repair or replace the Product at its sole option To obtain warranty service, contact VIZIO Technical Support via email: TechSupport@VIZIO.com or via phone at 877 MY VIZIO (877.698.4946) from 5:00AM to 9:00PM Monday through Friday and 8:00AM to 4:00PM Saturday and Sunday, Pacific Time, or visit www.VIZIO.com. PRE-AUTHORIZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE There will be no charge for parts or labor during the warranty period. Replacement parts and Products may be new or recertified at VIZIOs option and sole discretion. Replacement Defective Products must be sent to a VIZIO service center to obtain warranty service. VIZIO is not responsible for transportation costs to the service center, but VIZIO will cover return Product returns to VIZIOs service centers must utilize either the original carton box and shipping material or packaging that affords an equal degree of protection. VIZIO Technical VIZIOs one-year limited warranty only covers defects in materials and workmanship. This warranty does not cover, for example: cosmetic damage, normal wear and tear, improper operation, improper voltage supply or power surges, signal issues, damages from shipping, acts of God, any type of customer misuse, modifications or adjustments, as well as installation and set-up issues or any repairs attempted by anyone other than by a VIZIO authorized service center. Products with unreadable or removed serial numbers, or requiring THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. VIZIOS TOTAL LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER INCLUDING VIZIOS NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS, WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT. VIZIO SHALL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR DATA, COMMERCIAL LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE. THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE. LEGAL & COMPLIANCE FCC Class B Radio Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Notice:
1. The changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits. 3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such interference. RF Exposure Information This device meets the governments requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. IC Statement Operation is subject to the following two conditions:
1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. IC Radiation Exposure Statement This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Disposal and Recycling You must dispose of this product properly, according to local laws and regulations. Because this product contains electronic components and a battery, it must be disposed of separately from household waste. Contact local authorities to learn about disposal and recycling options. Other:
Image(s) used under license from Shutterstock.com U.S. patents apply to this product. See http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol,
& DTS and the Symbol together are registered trademarks and DTS Sound is a trademark of DTS, Inc. DTS, Inc. All Rights Reserved. 14 THIN+LIGHT With uncompromising performance, and premium picture and audio quality in a remarkably thin profile, the VIZIO Thin+Light is the Ultrabook thats impossible to ignore. Ultra-responsive and ultra-portable, the VIZIO Thin+Light boots up instantly and goes wherever you do. If good things come in small packages, this must be the best there is.the ultimate ultrabookVIZIO recOmmeNdsAvailable at www.VIZIO.comThis Product sold separately Available at www.VIZIO.comThis Product Sold SeparatelyThe VIZIO Co-Star Stream Player merges live TV and streaming entertainment into one experience, turning any HDTV into the ultimate smart TV. Using the latest version of Google TV, Co-Star decks out your existing HDTV with apps, full-screen Web browsing and the best in streaming entertainment. And with 1080p Full HD resolution, built-in Wi-Fi, and 3D-readiness, VIZIO Co-Star is the ultimate entertainment upgrade for any high-definition television.Vizio recommends 2013 ViZio iNc. all riGhtS reSerVed. 130121ch-Nc
This product uses the FCC Data API but is not endorsed or certified by the FCC