EX7710-B0 AX11000 WiFi 6E 10G Ethernet Gateway Users manual (Online) rev

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6444448.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case EX7710-B0 AX11000 WiFi 6E 10G Ethernet Gateway EX7710-B0 Power Adapter Ethernet Cable Quick Start Guide Package Contents A member of the Zyxel MPro Mesh PLUS solution family. MPro Mesh PLUS Solution:

EX7710-B0 WX5610-B0 MPro Mesh PLUS App Visit www.zyxel.com/us/en for updated information. Quick Start Guide Support information https://service-provider.zyxel.com/global/en/tech-support See the User's Guide at www.zyxel.com for more information, including customer support and safety warnings. US Importer Zyxel Communications, Inc 1130 North Miller Street Anaheim, CA 92806-2001 https://www.zyxel.com/us/en/

Copyright 2023 Zyxel and/or its afliates. All Rights Reserved. Step 1 Hardware Installation 1 2 Use the included Ethernet cable to connect the 3 The Power / Internet /WiFi /WPS LEDs will light up when the setup is complete. xDSL/cable/ber modems LAN port to the EX7710-B0s Note: If the lights do not turn on, please retry or contact your service provider for assistance. 2 3 1 10G WAN port as illustrated. Connect the power adapter to the EX7710-B0 and wait for 2 minutes. Check the EX7710-B0 front panel. Blue On - Power is on. Blinking - Starting up. POWER Red On - System failure. Blinking - Upgrading rmware. INTERNET Blue On - Internet is ready. Blinking -

Transmitting/receving internet data. Red On -

Attempt to get an IP address failed. Blue WiFi On - 2.4G, 5G and 6G wireless connections are ready. Off - 2.4G or 5G or 6G wireless connection is not ready or failed. Blinking - Transmitting/receving data. Green Blinking - WPS in progress. Off - No WPS activity. WPS Orange Blinking - IPTV SSID is paring. Internet xDSL/Cable/

Fiber modem Step 2 WiFi Connection A or B The label on the bottom of the EX7710-B0 provides 2 ways to connect your wireless device to WiFi:

Method A: Scan QR code or Method B: Using SSID Method A: SCAN QR code to connect WiFi B. Using the SSID method to connect WiFi Use your wireless device to scan the QR code on the EX7710-B0s bottom label. 1 2 The WiFi network is on the EX7710-B0s bottom label. On your wireless device, nd this SSID and enter the WiFi Password on After scanning the QR code, join this WiFi network and you can surf the internet. your wireless clients to surf the internet. Zyxelxxxxxx ZyxelXXXXXX 1 2 1/3 Step 3 App Management 1 After successfully surng the internet, please download the MPro Mesh PLUS app to 2 Open this app and enter the serial number from the EX7710-B0s bottom label. your wireless device. MPro Mesh Plus 3 Use this app to enjoy the following features:

Remote Management View Home Devices Guest Wi-Fi Manage Home Wi-Fi Name Internet Instant Block Add Mesh Extender Push Notication Safety Warning Adding a Wireless Extender See the following legal and regulation information at http://192.168.1.1/legalInfo. WPS button: If you have a wireless extender to add to your EX7710-B0s WiFi network, press the EX7710-B0s WPS button once, and press the WPS button on your extender within 120 seconds to start the WPS process. WPS ON 2/3 Regulatory Statements UNITED STATES of AMERICA FCC Warning Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This product has been tested and complies with the specications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna Increase the separation between the devices Connect the equipment to an outlet other than the receivers Consult a dealer or an experienced radio/TV technician for assistance FCC regulations restrict the operation of this device to indoor use only. The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while ying above 10,000 feet. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must be at least 20 cm from the user and must not be co-located or operating in conjunction with any other antenna or transmitter. For 2.4G WLAN, only channels 1~11 are operational. Selection of other channels is not possible. CANADA The following information applies if you use the product within Canada. Innovation, Science and Economic Development Canada ICES statement CAN ICES-003(B) / NMB-003(B) Innovation, Science and Economic Development Canada RSS-GEN & RSS-247 Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Scirence and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and (2) this device must accept any interfernce, including interference that may cause undesired operation of the device. L'metterur/rcepteur exempt de licence contenu dans le prs ent appareil est conforme aux CNR d'Innovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio ex empts de licence. L'exploitation est autorise aux deux condi tions suivantes: (1) l'appareil ne doit pas produire de brouillage; (2) L'appareil doit accepter tout brouillage radiolectrique su bi, mme si le brouillage est susc eptible d'en compromettre le fonctionnement. For 2.4 G WLAN, only channels 1-11 are operational. Selection of other channels is NOT possible. Pour le WLAN 2,4 G, seuls les canaux 1 11 sont oprationnels. La slection d'autres canaux n'est PAS possible. The device operating in the 5150-5250 MHZ band is only for indoor use to reduce the potential for harmful interference to co-channal mobile statellite systems. Where applicable, antenna type(s), antenna model(s), and the worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set force in Section 6.2.2.3 of RSS 247 shall be clearly indicated. Les dispositifs fonctionnant dans la bande de 5150 5250 MHz so nt rservs uniquement pour une utilisation l'intrieur af in de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;

Lorsq'ily a lieu, les types d'antnnes(s'il y en a plusieurs), les numros de modle de l'antenne et les pires angles d'inc linaison ncessaires pour rester conrme la limite de la p.i.r.e. applicable au masque d'lvation, nonce la section 6.2.2.3 du CNR-247, doi vent tre clairement indiqus. a) Operation shall be limited to indoor use only; and b) Operation on oil platforms, cars, trains, boats and aircraft shall be prohibited except for on large aircraft ying above 10,000 ft. a) Utilisation limite lintrieur seulement;

b) Utilisation interdite bord de plateformes de forage ptrolier, de voitures, de trains, de bateaux et daronefs, sauf bord dun gros aronef volant plus de 10 000 pieds daltitude. Industry Canada radiation exposure statement This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 31 cm between the radiator and your body. Dclaration dexposition aux radiations:

Cet quipement est conforme aux limites dexposition aux rayonnements ISED tablies pour un environnement non contrl.Cet quipement doit tre install et utilis avec un minimum de 31 cm de distance entre la source de rayonnement et votre corps. Safety Warnings DO NOT use this product near water, for example, in a wet basement or near a swimming pool. DO NOT expose your device to dampness, dust or corrosive liquids. DO NOT store things on the device. DO NOT install, use, or service this device during a thunderstorm. There is a remote risk of electric shock from lightning. Connect ONLY suitable accessories to the device. DO NOT open the device or unit. Opening or removing covers can expose you to dangerous high voltage points or other risks. ONLY qualied service personnel should service or disassemble this device. Please contact your vendor for further information. Make sure to connect the cables to the correct ports. Place connecting cables carefully so that no one will step on them or stumble over them. Always disconnect all cables from this device before servicing or disassembling. Please use the provided or designated connection cables/power cables/ adaptors. Connect it to the right supply voltage (for example, 110V AC in North America or 230V AC in Europe). If the power adaptor or cord is damaged, it might cause electrocution. Remove it from the device and the power source, repairing the power adapter or cord is prohibited. Contact your local vendor to order a new one. DO NOT remove the plug and connect it to a power outlet by itself; always attach the plug to the power adaptor rst before connecting it to a power outlet. DO NOT allow anything to rest on the power adaptor or cord and do NOT place the product where anyone can walk on the power adaptor or cord. DO NOT use the device outside, and make sure all the connections are indoors. There is a remote risk of electric shock from lightning. CAUTION: Risk of explosion if battery (on the motherboard) is replaced by an incorrect type. Dispose of used batteries according to the instructions. Dispose of them at the applicable collection point for the recycling of electrical and electronic equipment. For detailed information about recycling of this product, please contact your local city ofce, your household waste disposal service or the store where you purchased the product. DO NOT obstruct the device ventilation slots, as insufcient airow may harm your device. For example, do not place the device in an enclosed space such as a box or on a very soft surface such as a bed or sofa. The following warning statements apply, where the disconnect device is not incorporated in the equipment or where the plug on the power supply cord is intended to serve as the disconnect device, for permanently connected devices, a readily accessible disconnect device shall be incorporated external to the equipment;

for pluggable devices, the socket-outlet shall be installed near the equipment and shall be easily accessible.

- Caution! The RJ-45 jacks are not used for telephone line connection. 3/3