HOW TO OPERATE YOUR TRANSCEIVER 1, Remove screw and open battery door and snap in a 9-volt battery. (Alkaline batteries recommended)
. Turn the "ON-OFF" switch to "ON" position. Your transceiver is now ready to operat
. Press the "PUSH TO TALK" button for transmitting. Release "PUSH TO TALK" button for receiving. When transmitting, speak clearly in a normal voice, holding the set about 3" from your mouth. Best transmission and reception are obtained when the antenna is held in a vertical position. HOW 10 USE MORSE CODE FUNCTION 1. For 9 @ signal, turn the "O switch to'ON" postion 2. While pushing the PUSH TO TALK button, press the morse code button momentarily and release for desired signal. 3. And for receiving a signal, release the "PUSH TO TALK"
eR switch. cS 4, When back to communications again, use normal Jowoos push to talk operation. ea CAUTION SCREW. t 1. Your transceiver set has been fully adjusted prior to loons shipment from the factory and be sure not to touch Camagag= sATeny the internal components other than bate 2. When the sound becomes weak, itis time to change 9V ___0.5W the Battery. n one ANTENNA 2 MICROPHONE:
PUSH TO TALK BUTTON ON OFF SWITCH EACH UNIT USES ONE 9V BATTERY 3, After use, always return the ON-OFF Switch to the
(NOT INCLUDED) OFF position. COLOR & DESIGN MAY VARY 4, Keep your set in dry and clean place. 5 FOR PRODUCT QUESTIONS, L 1-800-8363126 Nore He ManurAcTuRen 6 Nor REsPONSaLe FOR ANY RADIO OR TY INTERFERENCE BY UNAUTHORIZED MODIFICATIONS TO TiS EQUIPMENT, SUCH MODIFICATIONS COU THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. ATTENTION: @
REMOVE ALL PLASTIC TIES & PACKAGING BEFORE GIVING THIS TOY TO A CHILD. ait
& %,, a m aes 7 4104410038" "6 a ao TH 2001 200 TOY INC. MILFORD MASSACHUSETTS 01757, U.S.A. MADE IN CHINA.