app
s
|
Applicant Information
|
|
1 2 3
|
Effective |
2021-01-18
|
1 2 3
|
Applicant's complete, legal business name |
Ride Vision LTD
|
1 2 3
|
FCC Registration Number (FRN) |
0030317234
|
1 2 3
|
Physical Address |
Galgalei Haplada 11
|
1 2 3
|
Herzliya, N/A
|
1 2 3
|
Israel
|
|
app
s
|
TCB Information
|
1 2 3
|
TCB Application Email Address |
j******@eurofins.com
|
1 2 3
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2 3
|
Grantee Code |
2AYIB
|
1 2 3
|
Equipment Product Code |
RV001
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3
|
Name |
U**** L********
|
1 2 3
|
Title |
CEO & Co-founder
|
1 2 3
|
Telephone Number |
97277********
|
1 2 3
|
Fax Number |
97277********
|
1 2 3
|
E-mail |
a******@ride-vision.com
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 | Equipment Class | DTS - Digital Transmission System |
1 2 3 | NII - Unlicensed National Information Infrastructure TX |
1 2 3 | DSS - Part 15 Spread Spectrum Transmitter |
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Ride Vision 1 |
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 | Modular Equipment Type | Single Modular Approval |
1 2 3 | Purpose / Application is for | Original Equipment |
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 | Grant Comments | Single Modular Approval. Output power listed is peak conducted.
This device supports 802.11b, 802.11g and 802.11n with a 20 MHz bandwidth mode.
RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons.
The maximum antenna gain is 4.0dBi. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. |
1 2 3 | Single Modular Approval. Output power listed is average conducted.
This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz and 80 MHz bandwidth mode.
RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons.
The maximum antenna gain is 4.0dBi. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. |
1 2 3 | Single Modular Approval. Output power listed is peak conducted.
RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The maximum antenna gain is 4.0dBi. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. |
1 2 3 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3
|
Firm Name |
Shenzhen LCS Compliance Testing Laboratory Ltd.
|
1 2 3
|
Name |
G**** L****
|
1 2 3
|
Telephone Number |
0755-********
|
1 2 3
|
Fax Number |
0755-********
|
1 2 3
|
E-mail |
g******@lcs-cert.com
|
|