Manual Made in China Product Name : Wireless bluetooth headphone FCC ID: 2ASKA -LM3081900 IC: 24781-LM3081900 Model : 26-3081900 Brand: Elecpioneer Charging a. Before the first use of the battery must be full of to use again 1-The charger wire connected to the headphone jack. 2. The charging indicator shows a red light, when fully charged the red light, blue light to show is full charge state. Turn ON/OFF Specification :
solution :JL transmission distance 10m playing time4h stand -by time 300 h battery :80mAh charging time ;2h trumpet 14mm sensitivity 1103dB S.P.L at 1KHZ impedance 32 frequency range 2402 MH~2480 MHz Output Power : 0.5943mW 1 .Boot: press and hold multifunction button for about 6 seconds , the blue light bright 1 bluetooth headset Ib open at tills time . 2. Turn off: press and hold multifunction button for about 5 seconds , the red light of light 1 second, and a voice prompt
"shutdown ", the bluetooth headset that enter the shutdown state . Paired with mobile phones, connection Volume,Next /Pre track,Play music 1 .Open the bluetooth h sad set in red and blue lights flashing, bluetooth headset has entered the matching state at this time. 2.0pen the mobile phone bluetooth and search for bluetooth devices. 3. Found In mobile search list has to search the bluetooth headset , click on the matching , and a voice prompt "connected '. 4. If you don't successful pairing , repeated operation matching a can. 1.Volume :Press volume up/down key on your phone to increase /decrease volume 2.Next track ,prese and hold the volume + or 2s,Pre track,prese and hold the volume - or 2s 3.Play music :short press the multifunction button,can activate the phone music player, short press the multifuntion button to play/pause . Answer , hang up and reject four. And redial Industry Canada statement :
1. Incoming calls: telephone , short press the multifunction button one time. 2. Hang up: dial the phone or on the phone, the short press the multifunction button onetime. 3. Hie decline a call : when call, long press the multifunction button for2 seconds to loosen , 4. Redial :
according to the multifunction button twice quickly, redial finally set aside a cellphone Number five. To the telegraph 1. Call, bluetooth ar opportunity for mobile phono number , sucti as 13800000000 . This device complies with ISED s licence -exempt RSSs . Operation is subject to the following two conditions : (1) This device may not cause harmful interference , and (2) this device must accept any interference received , including interference that may cause undesired operation . Le prsent appareil est conforme aux CNR d ISED applicables aux appareils radio exempts de licence . Lexploitation est autorise aux deux conditions suivantes : (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable . Radiation Exposure Statement :
The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual . The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available . Dclaration d'exposition aux radiations :
Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les Etats-Unis et le Canada tablies pour un environnement non contr l. Le produit est sr pour un fonctionnement tel que dcrit dans ce manuel . La rduction aux expositions RF peut tre augment e si l'appareil peut tre conserv aussi loin que possible du corps de l'utilisateur ou que le dispositif est rgl sur la puissance de sortie la plus faible si une telle fonction est disponible . Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules . Operation is subject to the following two conditions : (1) This device may not cause harmful interference , and (2) this device must accept any interference received , including interference that may cause undesired operation . interference to radio communications . However , there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception , which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures :
- Reorient or relocate the receiving antenna .
- Increase the separation between the equipment and receiver .
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected .
- Consult the dealer or an experienced radio /TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment . This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement :
This equipment has been tested and found to comply with the limits for a Class B digital device , pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates , uses and can radiate radio frequency energy and, if not . installed and used in accordance with the instructions , may cause harmful The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual . The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available .